Mercurial > public > hwos_code
annotate src/hwos.inc @ 641:1212d39c9f6f
3.14 beta work
| author | heinrichsweikamp |
|---|---|
| date | Sat, 21 Nov 2020 17:46:29 +0100 |
| parents | 8c1f1f334275 |
| children | 7d8a4c60ec1a 5b7fe7777425 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 640 | 3 ; File hwos.inc * combined next generation V3.12.3 |
| 0 | 4 ; |
| 623 | 5 ; OSTC Platform Definitions |
| 0 | 6 ; |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 604 | 10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code |
| 0 | 11 ;============================================================================= |
| 12 | |
| 623 | 13 |
| 634 | 14 ; ---- Hardware Configuration |
| 623 | 15 LIST P=18F87K22 ; compiler settings, if changed change also: Configure -> SelectDevice in MPLAB |
| 16 #include "p18f87k22.inc" ; processor definitions | |
| 17 #include "ports.inc" ; port map definitions | |
| 0 | 18 |
| 604 | 19 |
| 634 | 20 ; ---- Software Configuration |
| 623 | 21 #include "configuration.inc" ; OSTC hwOS configuration |
| 582 | 22 |
| 0 | 23 |
| 634 | 24 ;----------------------------------------------------------------------------- |
| 25 ; Settings, Limits, Thresholds, Encodings, etc. | |
| 26 ;----------------------------------------------------------------------------- | |
| 27 | |
| 28 ; ---- Language Codes | |
| 604 | 29 #DEFINE none 0 ; no language selected |
| 623 | 30 #DEFINE en 1 ; select English |
| 31 #DEFINE de 2 ; select German | |
| 32 #DEFINE fr 3 ; select French | |
| 33 #DEFINE it 4 ; select Italian | |
| 604 | 34 |
| 560 | 35 |
| 634 | 36 ; ---- Magic Cookie Definition |
| 631 | 37 #DEFINE comm_service_key 0xABCDEF ; simsalabim to establish comm service mode |
| 0 | 38 |
| 39 | |
| 634 | 40 ; ---- Scrolling Menu Support |
| 41 ;#DEFINE scrolling_menu_enabled ; disabled | |
| 42 | |
| 43 | |
| 44 ; ---- Logo Address Vectors | |
| 604 | 45 #DEFINE hw_logo_block 0x01E000 ; color image data for heinrichsweikamp logo |
| 634 | 46 #DEFINE comm_logo_1 0x01EEDE ; color image data for USB or BT logo |
| 47 #DEFINE comm_logo_2 0x01EA04 ; color image data for BT logo, "+" bootloader | |
| 604 | 48 |
| 49 | |
| 582 | 50 ;-----------------------------EEPROM DATA ------------------------------------ |
| 51 ; Automatic reset of all options when this is changed: | |
| 631 | 52 #DEFINE eeprom_opt_version .8 ; range: 16 bit |
| 53 #DEFINE eeprom_vault_version .1 ; range: 8 bit | |
| 0 | 54 ;----------------------------------------------------------------------------- |
| 55 | |
| 623 | 56 |
| 634 | 57 ; ---- PWM1 for LED dimming |
| 58 #DEFINE CCP1CON_VALUE b'00001100' | |
| 623 | 59 #DEFINE T2CON_ECO b'01111110' |
| 60 #DEFINE T2CON_NORMAL b'01111110' | |
| 61 #DEFINE T2CON_FASTEST b'01111110' | |
| 62 | |
| 63 | |
| 634 | 64 ; ---- CPU speeds |
| 623 | 65 #DEFINE coding_speed_eco .1 ; 1 MHz = eco speed |
| 66 #DEFINE coding_speed_normal .2 ; 16 MHz = normal speed | |
| 67 #DEFINE coding_speed_fastest .4 ; 64 MHz = fastest speed (32 MHz on OSTC Sport BLE) | |
| 68 | |
| 69 #DEFINE speed_is_eco cpu_speed_state,0 ; =1: CPU is running at eco speed | |
| 70 #DEFINE speed_is_normal cpu_speed_state,1 ; =1: CPU is running at normal speed | |
| 71 #DEFINE speed_is_fastest cpu_speed_state,2 ; =1: CPU is running at fastest speed | |
| 72 | |
| 604 | 73 |
| 634 | 74 ; ---- Divemode Custom View Indexes - Attention: these numbers need to be in line with the jump tables in customview.asm! |
| 631 | 75 #DEFINE index_blank .0 ; blank view |
| 604 | 76 #DEFINE index_avr_stopwatch .1 ; average depth and stopwatch |
| 77 #DEFINE index_compass_dm .2 ; compass | |
| 78 #DEFINE index_ppo2_sensors .3 ; ppO2 sensors | |
| 79 #DEFINE index_sensor_check .4 ; sensor check | |
| 80 #DEFINE index_pscr_info .5 ; pSCR data | |
| 81 #DEFINE index_pressures_SAC .6 ; tank pressure and SAC rate | |
| 82 #DEFINE index_gas_needs_ascent .7 ; gas needs for ascent / cave return | |
| 631 | 83 #DEFINE index_cave_tts .8 ; cave mode TTS |
| 84 #DEFINE index_decoplan .9 ; deco plan | |
| 85 #DEFINE index_ceiling_GF_tissue .10 ; ceiling, current GF and tissues | |
| 86 #DEFINE index_CNS .11 ; CNS values | |
| 87 #DEFINE index_ppo2_ead_end_cns .12 ; ppO2, END/EAD and CNS or gas density | |
| 604 | 88 #DEFINE index_clock_batt_surfpress .13 ; clock, battery and surface pressure |
| 631 | 89 #DEFINE index_gf_factors .14 ; GF factors |
| 90 #DEFINE index_cave_waypoints .15 ; cave waypoints | |
| 91 #DEFINE index_cv_dm_max .13 ; highest index used in normal custom view rotation | |
| 28 | 92 |
| 623 | 93 |
| 634 | 94 ; ---- Timing for button hold-down flags |
| 631 | 95 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7.8125 ms -> 1.00 s |
| 604 | 96 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7.8125 ms -> 0.25 s |
| 631 | 97 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7.8125 ms -> 0.50 s |
| 0 | 98 |
| 623 | 99 |
| 634 | 100 ; ---- Font Sizes |
| 623 | 101 #DEFINE FT_TINY .0 ; aa_font16_block, full character set |
| 102 #DEFINE FT_SMALL .1 ; aa_font28_block, full character set | |
| 103 #DEFINE FT_STANDARD .2 ; aa_font34_block, full character set | |
| 104 #DEFINE FT_MEDIUM .3 ; aa_font48_block, only digits, /, ., :, ;, <, =, > and ? | |
| 105 #DEFINE FT_LARGE .4 ; aa_font90_block, only digits, / and . | |
| 106 #DEFINE FT_HUGE .5 ; aa_font92_block, only digits, / and . | |
| 107 | |
| 0 | 108 |
| 634 | 109 ; ---- External O2 Sensors |
| 628 | 110 #DEFINE min_mv .70 ; = 7 mV |
| 604 | 111 #DEFINE max_mv .2500 ; = 250 mV |
| 634 | 112 #DEFINE ignore_mv_above .3500 ; = 350 mV (to suppress ghost readings on long open cables) |
| 113 #DEFINE ignore_mv_below .19 ; = 1.9 mv (to suppress noise readings on open cabled) | |
| 0 | 114 |
| 623 | 115 |
| 634 | 116 ; ---- Profile Recording Parameters |
| 117 #DEFINE logbook_profile_version 0x40+0x24 ; logbook recording format: internal (2 bit) + external (6 bit) | |
| 582 | 118 #DEFINE samplingrate_apnoe .1 ; [seconds] |
| 560 | 119 |
| 623 | 120 |
| 634 | 121 ; ---- Profile Recording Rates - Attention: all Divisors must be < 16 ! |
| 604 | 122 #DEFINE div_temperature .6 ; x sampling rate [s] |
| 123 #DEFINE div_deco .6 ; x sampling rate [s] | |
| 124 #DEFINE div_gf .12 ; x sampling rate [s] | |
| 125 #DEFINE div_ppo2_sensors .2 ; x sampling rate [s] | |
| 126 #DEFINE div_decoplan .12 ; x sampling rate [s] | |
| 127 #DEFINE div_cns .12 ; x sampling rate [s] | |
| 628 | 128 #DEFINE div_tank .12 ; x sampling rate [s] |
| 560 | 129 |
| 623 | 130 |
| 634 | 131 ; ---- Profile Recording Data - Attention: Information Lengths must be < 16 ! |
| 582 | 132 #DEFINE infolength_temperature .2 ; [byte] |
| 133 #DEFINE infolength_deco .2 ; [byte] | |
| 134 #DEFINE infolength_gf .1 ; [byte] | |
| 135 #DEFINE infolength_ppo2_sensors .9 ; [byte] | |
| 136 #DEFINE infolength_decoplan .15 ; [byte] | |
| 137 #DEFINE infolength_cns .2 ; [byte] | |
| 628 | 138 #DEFINE infolength_tank .2 ; [byte] |
| 0 | 139 |
| 623 | 140 |
| 634 | 141 ; ---- RX Functions |
| 628 | 142 #DEFINE rx_packet_overdue_timeout .120 ; [seconds] timeout for pressure measurements becomming declared as outdated (max. 255) |
| 604 | 143 #DEFINE max_pres_diff_min .5 ; [bar] minimum selectable pressure difference for ind.double mode |
| 144 #DEFINE max_pres_diff_max .50 ; [bar] maximum selectable pressure difference for ind.double mode | |
| 0 | 145 |
| 623 | 146 IFDEF _ccr_pscr |
| 147 #DEFINE tr_pres_options .15 ; number of options for pressure measurement source / with diluents | |
| 148 ELSE | |
| 149 #DEFINE tr_pres_options .6 ; number of options for pressure measurement source / OC gases only | |
| 150 ENDIF | |
| 151 | |
| 631 | 152 |
| 634 | 153 ; ---- Cave Mode |
| 623 | 154 IFDEF _cave_mode |
| 631 | 155 #DEFINE backtrack_waypoint_max .30 ; highest user-available waypoint number (max allowed: 30) |
| 156 #DEFINE backtrack_almost_full_threshold .240 ; backtrack index position at which the almost full flag will be set | |
| 157 #DEFINE backtrack_entire_full_threshold .250 ; backtrack index position at which the entirely full flag will be set | |
| 623 | 158 ENDIF |
| 159 | |
| 160 | |
| 634 | 161 ; ---- Gas Needs Settings |
| 604 | 162 #DEFINE min_tank_size .1 ; [liter] |
| 163 #DEFINE max_tank_size .40 ; [liter] | |
| 164 #DEFINE min_fill_press .5 ; [0 bar] value is in multiples of 10 bar | |
| 165 #DEFINE max_fill_press .29 ; [0 bar] value is in multiples of 10 bar, no 300 bar due to too far beyond ideal gas laws | |
| 166 | |
| 167 | |
| 634 | 168 ; ---- Timeouts for Menus / Surface Mode |
| 631 | 169 #DEFINE surfmode_timeout_default .240 ; [s] default timeout for surface mode and surface menus |
| 170 #DEFINE surfmode_timeout_aa_15v .90 ; [s] timeout for surface mode and surface menus when on 1.5V battery | |
| 171 #DEFINE surfmode_timeout_simulator .240 ; [s] special timeout for simulator mode | |
| 634 | 172 |
| 604 | 173 |
| 634 | 174 ; ---- Timeouts for Menus / Dive Mode |
| 623 | 175 #DEFINE divemode_timeout_premenu .10 ; [s] timeout for dive mode pre-menu |
| 176 #DEFINE divemode_timeout_mainmenu .30 ; [s] timeout for dive mode main menu | |
| 177 | |
| 178 | |
| 634 | 179 ; ---- RS232 Timeout |
| 180 #DEFINE rx_timeout .400 ; [ms] timeout for RS232 RX, needs to be multiple of 50 ms | |
| 631 | 181 |
| 182 | |
| 634 | 183 ; ---- End-of-Dive Timeouts |
| 631 | 184 #DEFINE simulator_timeout_normal .90 ; [min] timeout simulator mode |
| 640 | 185 #DEFINE simulator_timeout_cave .240 ; [min] timeout simulator mode (cave mode) |
| 186 #DEFINE apnoe_timeout .15 ; [min] timeout at surface in apnoe mode | |
| 187 #DEFINE simulator_timeout .15 ; [s] timeout at surface in simulator mode | |
| 188 #DEFINE divetime_less_1min_timeout .5 ; [s] timeout at surface for very short dives | |
| 631 | 189 |
| 190 | |
| 634 | 191 ; ---- other Timeouts |
| 631 | 192 #DEFINE deep_sleep_10mins .144 ; [x 10mins] (24h in this example) |
| 193 | |
| 582 | 194 |
| 634 | 195 ; ---- Surface Mode Thresholds and Limits |
| 623 | 196 #DEFINE high_altitude_threshold .880 ; [mbar] ambient pressure at which to switch into high altitude mode |
| 640 | 197 #DEFINE max_surfpressure .1060 ; [mbar] maximum value for internal surface pressure |
| 634 | 198 #DEFINE pressure_noise_threshold .10 ; [mbar] deltaP threshold for start of fast display updating |
| 199 #DEFINE pressure_noise_lag_time .6 ; [1/4 secs] lag time of display updating after deltaP < threshold again | |
| 560 | 200 |
| 201 | |
| 634 | 202 |
| 203 ; ---- Dive Mode Thresholds and Limits | |
| 623 | 204 #DEFINE wake_up_from_sleep .1160 ; [mbar] absolute pressure at which to switch from sleep mode to surface / dive mode |
| 205 #DEFINE dive_threshold_norm_alt_start .125 ; [mbar] relative pressure for normal altitude start-of-dive (equals depth in cm) | |
| 206 #DEFINE dive_threshold_norm_alt_end .75 ; [mbar] relative pressure for normal altitude end-of-dive (equals depth in cm) | |
| 207 #DEFINE dive_threshold_high_alt_start .325 ; [mbar] relative pressure for high altitude start-of-dive (equals depth in cm) | |
| 208 #DEFINE dive_threshold_high_alt_end .75 ; [mbar] relative pressure for high altitude end-of-dive (equals depth in cm) | |
| 209 #DEFINE ostc_depth_max .120 ; [m] maximum allowed operational depth for OSTC 2, 3, cR, TR, Plus & Sport | |
| 628 | 210 #DEFINE deco_region_distance .2 ; [m] distance below first stop for the deco region to begin |
| 192 | 211 |
| 582 | 212 |
| 634 | 213 ; ---- Dive Mode Margins |
| 623 | 214 #DEFINE ppO2_margin_on_max .300 ; [0.1 mbar] extra margin on ppO2 max values to compensate for surface pressures > 1000 hPa |
| 604 | 215 #DEFINE sensor_voting_logic_threshold .10 ; threshold in 0.01 bar |
| 0 | 216 |
| 623 | 217 |
| 634 | 218 ; ---- Gas and Dil types |
| 631 | 219 #DEFINE num_gas_types .4 ; Disabled, First, Normal, Deco |
| 220 #DEFINE num_dil_types .3 ; Disabled, First, Normal | |
| 221 | |
| 222 | |
| 634 | 223 ; ---- ppO2 Limits |
| 623 | 224 #DEFINE ppo2_warning_low_lowest .15 ; [cbar] minimum value for minimum ppO2 on OC |
| 225 #DEFINE ppo2_warning_low_default .17 ; [cbar] default value for minimum ppO2 on OC | |
| 226 #DEFINE ppo2_warning_low_highest .21 ; [cbar] maximum value for minimum ppO2 on OC | |
| 227 | |
| 228 #DEFINE ppo2_warning_loop_lowest .20 ; [cbar] minimum value for minimum ppO2 on loop | |
| 229 #DEFINE ppo2_warning_loop_default .40 ; [cbar] default value for minimum ppO2 on loop | |
| 230 #DEFINE ppo2_warning_loop_highest .60 ; [cbar] maximum value for minimum ppO2 on loop | |
| 231 | |
| 232 #DEFINE ppo2_warning_high_lowest .120 ; [cbar] minimum value for maximum ppO2 in none-deco phase | |
| 628 | 233 #DEFINE ppo2_warning_deco_lowest .120 ; [cbar] minimum value for maximum ppO2 in deco phase |
| 234 | |
| 623 | 235 #DEFINE ppo2_warning_high_default .140 ; [cbar] default value for maximum ppO2 in none-deco phase |
| 236 #DEFINE ppo2_warning_deco_default .160 ; [cbar] default value for maximum ppO2 in deco phase | |
| 628 | 237 |
| 238 IFDEF _high_ppO2_max | |
| 239 #DEFINE ppo2_warning_high_highest .200 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 240 #DEFINE ppo2_warning_deco_highest .200 ; [cbar] maximum value for maximum ppO2 in deco phase | |
| 241 ELSE | |
| 242 #DEFINE ppo2_warning_high_highest .160 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 623 | 243 #DEFINE ppo2_warning_deco_highest .160 ; [cbar] maximum value for maximum ppO2 in deco phase |
| 628 | 244 ENDIF |
| 623 | 245 |
| 634 | 246 |
| 247 ; ---- Salinity Limits | |
| 631 | 248 #DEFINE salinity_min .0 ; [%] minimum value for salinity percentage |
| 249 #DEFINE salinity_max .4 ; [%] maximum value for salinity percentage | |
| 0 | 250 |
| 634 | 251 |
| 252 ; ---- Color-Code Parameters for the Dive Mode | |
| 582 | 253 #DEFINE color_code_velocity_warn_high .11 ; [m/min] |
| 254 #DEFINE color_code_velocity_attn_high .10 ; [m/min] | |
| 623 | 255 #DEFINE velocity_display_threshold .3 ; [m/min] |
| 256 | |
| 257 | |
| 634 | 258 ; ---- Simulator Parameters |
| 623 | 259 #DEFINE simulator_startdepth .200 ; [mbar] initial depth (relative pressure) when entering simulator mode |
| 260 #DEFINE simulator_descent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down descent | |
| 261 #DEFINE simulator_ascent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down ascent | |
| 628 | 262 #DEFINE simulator_descent_rate .5 ; [mbar/0.125 sec] normal descent speed, 5 equals 24 m/min |
| 623 | 263 #DEFINE simulator_ascent_rate .2 ; [mbar/0.125 sec] normal ascent speed, 2 equals 9 m/min |
| 264 | |
| 0 | 265 |
| 634 | 266 ; ---- Battery Thresholds |
| 623 | 267 #DEFINE max_battery_charge_temp .3231 ; [0.1 Kelvin] max allowed battery temperature during charging (equals 50°C) |
| 604 | 268 #DEFINE lithium_36v_empty .2400 ; [mV] Saft 3.6 V LS14500 AA - threshold for battery percent display |
| 623 | 269 #DEFINE lithium_36v_low .2000 ; [mV] Saft 3.6 V LS14500 AA - lowest possible voltage, value must be higher than value of aa_15v_high! |
| 270 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1.5 V E2 AA - highest possible voltage, value must be lower than value of lithium_36v_low! | |
| 271 #DEFINE aa_15v_low .1100 ; [mV] Energizer 1.5 V E2 AA - lowest possible voltage, according to Energizer data sheet EBC-4201R, page 2 | |
| 272 #DEFINE battery_show_level .30 ; [%] threshold when to show battery level | |
| 628 | 273 #DEFINE battery_warn_level_36 .15 ; [%] threshold for 3.6 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 631 | 274 #DEFINE battery_warn_level_15 .25 ; [%] threshold for 1.5 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 0 | 275 |
| 623 | 276 |
| 634 | 277 ; ---- 3.6 Volt Battery Sensing Data Points at 70 mA Load |
| 582 | 278 #DEFINE lithium_36v_75 .3000 ; [mV] |
| 279 #DEFINE lithium_36v_50 .2900 ; [mV] | |
| 280 #DEFINE lithium_36v_25 .2600 ; [mV] | |
| 281 #DEFINE lithium_36v_10 .2500 ; [mV] | |
| 604 | 282 |
| 628 | 283 |
| 634 | 284 ; ---- Capacity for 2.4 Ah Saft LS14500 and 0.8 Ah Panasonic UR14500P |
| 623 | 285 ; battery_gauge: 6 is nAs |
| 448 | 286 ; devide through 65536 |
| 604 | 287 ; a) devide through 364 -> result is in percent of a 2.4 Ah battery |
| 288 ; or b) devide through 121 -> result is in percent of a 0.8 Ah battery | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
35
diff
changeset
|
289 |
| 628 | 290 |
| 634 | 291 ; ---- internal Battery Gauging |
| 623 | 292 #DEFINE capacity_saft_internal .364 |
| 293 #DEFINE capacity_panasonic_internal .121 | |
| 294 | |
| 448 | 295 |
| 604 | 296 ; Gauge IC |
| 640 | 297 #DEFINE capacity_saft .271 ; 2.3Ah/0.085mAh/100 [%] |
| 298 #DEFINE offset_saft .38477 ; 65536-(2.3Ah/0.085mAh) | |
| 448 | 299 |
| 640 | 300 #DEFINE capacity_panasonic .94 ; 0.8Ah/0.085mAh/100 [%] |
| 623 | 301 #DEFINE offset_panasonic .56124 ; 65536-(0.8Ah/0.085mAh) |
| 582 | 302 |
| 623 | 303 #DEFINE capacity_ncr18650 .364 ; 3.1Ah/0.085mAh/100 [%] |
| 304 #DEFINE offset_ncr18650 .29065 ; 65536-(3.1Ah/0.085mAh) | |
| 448 | 305 |
| 640 | 306 #DEFINE capacity_ur16650 .235 ; 2.0Ah/0.085mAh/100 [%] |
| 307 #DEFINE offset_ur16650 .42006 ; 65536-(2.0Ah/0.085mAh) | |
| 623 | 308 |
| 582 | 309 |
| 634 | 310 ; ---- Power Consumption Values |
| 582 | 311 #DEFINE current_sleepmode .31 |
| 623 | 312 #DEFINE current_backlight_multi .115 ; * CCPR1L + current_backlight_offset (restricted to <= 255) |
| 582 | 313 #DEFINE current_backlight_offset .216 |
| 314 #DEFINE current_speed_eco .1914 | |
| 315 #DEFINE current_speed_normal .4027 | |
| 316 #DEFINE current_speed_fastest .5050 | |
| 317 #DEFINE current_ir_receiver .139 | |
| 318 #DEFINE current_compass .28 | |
| 0 | 319 |
| 623 | 320 |
| 634 | 321 ; ---- Brightness Thresholds (between zero (off) and 255 (max. power consumption)) |
| 582 | 322 #DEFINE ambient_light_max_high_36V .170 |
| 323 #DEFINE ambient_light_max_high_cr .240 | |
| 324 #DEFINE ambient_light_max_high_15V .140 | |
| 325 #DEFINE ambient_light_min_high .35 | |
| 326 #DEFINE ambient_light_max_medium .125 | |
| 327 #DEFINE ambient_light_min_medium .25 | |
| 328 #DEFINE ambient_light_max_eco .70 | |
| 329 #DEFINE ambient_light_min_eco .10 ; must be the lowest value! | |
| 0 | 330 |
| 623 | 331 |
| 634 | 332 ; ---- IR Link Timeout |
| 631 | 333 #DEFINE ir_timeout_value .128 ; in multiples of 62.5 ms |
| 623 | 334 |
| 0 | 335 |
| 634 | 336 ; ---- Setpoint Control |
| 582 | 337 #DEFINE surface_sp .50 ; in cbar |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
344
diff
changeset
|
338 |
| 623 | 339 |
| 634 | 340 ; ---- Gaslist hard-coded Limits |
| 341 IFDEF _helium | |
| 342 #DEFINE gaslist_min_o2 .7 ; minimum O2 [%] ( 7% is minimum value to keep MOD < 255 meters / 1 Byte) | |
| 343 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 344 #DEFINE gaslist_max_He .100-gaslist_min_o2 ; maximum He [%] | |
| 345 #DEFINE gaslist_max_change_depth .140 ; max. change depth [m] | |
| 346 #DEFINE tissue_graphics_options .2 ; tissue graphics "Pres+Sat" and "N2+He" available | |
| 347 ELSE | |
| 348 #DEFINE gaslist_min_o2 .21 ; minimum O2 [%] | |
| 349 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 350 #DEFINE gaslist_max_He .0 ; maximum He [%] | |
| 351 #DEFINE gaslist_max_change_depth .70 ; max. change depth [m] | |
| 352 #DEFINE tissue_graphics_options .1 ; tissue graphics "Pres+Sat" only available | |
| 353 ENDIF | |
| 354 | |
| 355 | |
| 356 ; ---- Setpoint list hard-coded Limits | |
| 357 #DEFINE gaslist_sp_max .160 ; max. setpoint [cbar] | |
| 358 #DEFINE gaslist_sp_min .50 ; min. setpoint [cbar] | |
| 359 #DEFINE gaslist_sp_max_depth .100 ; max change depth [m] | |
| 360 | |
| 361 | |
| 362 ; ---- Compass Display | |
| 363 #DEFINE compass_fast_treshold .9 ; show new heading instantly if angular difference > compass_fast_treshold, else show animated turning of compass rose | |
| 364 #DEFINE compass_averaging .10 ; number of averaging cycles | |
| 365 | |
| 366 | |
| 367 ;----------------------------------------------------------------------------- | |
| 368 ; Bit Flags | |
| 369 ;----------------------------------------------------------------------------- | |
| 370 | |
| 371 ; ---- Gas / Diluent Type & State | |
| 631 | 372 ; .0 ; | 0: disabled, 1: first, 2: normal/work, 3: deco |
| 373 ; .1 ; | | |
| 374 #DEFINE gas_lost .2 ; =1: gas/diluent is lost (permanently unavailable) | |
| 375 #DEFINE gas_staged .3 ; =1: gas/diluent is staged (temporary unavailable) | |
| 376 ; .4 ; --- unused | |
| 377 ; .5 ; --- unused | |
| 378 ; .6 ; --- unused | |
| 379 ; .7 ; --- unused | |
| 380 | |
| 634 | 381 ; ---- Bit Flags for Communication with p2_deco.c - char_O_main_status |
| 623 | 382 #DEFINE DECO_VOLUME_FLAG .0 ; =1: calculate gas needs |
| 383 #DEFINE DECO_BOTTOM_FLAG .1 ; =1: calculate gas needs for full bottom segment, =0: ...for extra time only | |
| 384 #DEFINE DECO_CAVE_MODE .2 ; =1: calculate ascent and gas needs using backtracking data | |
| 631 | 385 #DEFINE DECO_GAS_CONTINGENCY .3 ; =1: use a second best gas if best gas is all used up |
| 623 | 386 #DEFINE DECO_TR_FUNCTIONS .4 ; =1: calculate TR functions (pressure readings) |
| 387 #DEFINE DECO_EXTENDED_STOPS .5 ; =1: place gas changes also below 1st stop depth | |
| 388 #DEFINE DECO_MODE_LOOP_FLAG .6 ; =1: calculate real tissues in loop mode (CCR or pSCR) | |
| 389 #DEFINE DECO_MODE_PSCR_FLAG .7 ; =1: calculate real tissues in pSCR mode (loop flag needs to be set, too) | |
| 390 | |
| 634 | 391 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_status |
| 623 | 392 #DEFINE DECO_START_NORM .0 ; =1: write: start calculation of a normal deco plan |
| 393 #DEFINE DECO_START_ALT .1 ; =1: write: start calculation of an alternative deco plan | |
| 394 #DEFINE DECO_COMPLETED_NORM .0 ; =1: read: calculation of a normal deco plan has completed | |
| 395 #DEFINE DECO_COMPLETED_ALT .1 ; =1: read: calculation of an alternative deco plan has completed | |
| 396 #DEFINE DECO_INITIALIZE .2 ; =1: write: initialize deco engine (to be done only once at the begin of every dive) | |
| 628 | 397 #DEFINE DECO_CALCULATOR_MODE .3 ; =1: deco engone is run from the deco calculator |
| 623 | 398 #DEFINE DECO_BAILOUT_FLAG .4 ; =1: allow gas switches before first deco stop (used in bailout plans) |
| 631 | 399 #DEFINE DECO_DELAY_FLAG .5 ; =1: figure in a delayed ascent (fTTS) |
| 623 | 400 ; DECO_MODE_LOOP_FLAG .6 ; =1: calculate simulated tissues in loop mode (CCR or pSCR) |
| 401 ; DECO_MODE_PSCR_FLAG .7 ; =1: calculate simulated tissues in pSCR mode (loop flag needs to be set, too) | |
| 402 | |
| 634 | 403 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_warnings |
| 623 | 404 #DEFINE IBCD_warning .0 ; =1: IBCD currently occuring |
| 405 #DEFINE IBCD_warning_lock .1 ; =1: IBCD occured durign the dive | |
| 406 #DEFINE mbubble_warning .2 ; =1: microbubbles potentionally currently occuring | |
| 407 #DEFINE mbubble_warning_lock .3 ; =1: microbubbles potentionally occured during the dive | |
| 408 #DEFINE outside_warning .4 ; =1: currently outside the ZHL-16 model | |
| 409 #DEFINE outside_warning_lock .5 ; =1: was outside the ZHL-16 model during the dive | |
| 410 #DEFINE outside_attention .6 ; =1: currently near to the limits of the ZHL-16 model | |
| 628 | 411 #DEFINE deco_plan_incomplete .7 ; =1: internal error: deco calculation incomplete |
| 623 | 412 |
| 634 | 413 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_info |
| 628 | 414 #DEFINE deco_mode .0 ; =1: in deco mode, deco ppO2 levels permitted |
| 604 | 415 #DEFINE ind_double_switch .1 ; =1: switch to other tank advice active |
| 631 | 416 #DEFINE gas_needs_fTTS .2 ; =1: indicated gas needs are calculated in fTTS mode |
| 623 | 417 #DEFINE deco_zone .3 ; =1: fTTS is <= TTS (not updated when in bailout mode) |
| 604 | 418 #DEFINE deco_ceiling .4 ; =1: ceiling depth > 0 |
| 631 | 419 #DEFINE deco_stops_norm .5 ; =1: deco stops found in normal plan |
| 420 #DEFINE deco_stops_alt .6 ; =1: deco stops found in alternative plan | |
| 421 #DEFINE gas_needs_cave .7 ; =1: indicated gas needs are calculated in cave mode | |
| 623 | 422 |
| 634 | 423 ; ---- Bit Flags for Status on Variables of Type char |
| 604 | 424 #DEFINE char_transmitter_lost .6 |
| 425 #DEFINE char_invalid_flag .7 | |
| 426 #DEFINE char_transmitter_low_bat .7 | |
| 427 | |
| 634 | 428 ; ---- Bit Flags for Status on Variables of Type int (Flags are placed in the UPPER byte!) |
| 604 | 429 #DEFINE int_invalid_flag .2 |
| 430 #DEFINE int_not_yet_computed .3 | |
| 431 #DEFINE int_is_zero .3 | |
| 432 #DEFINE int_low_flag .4 | |
| 433 #DEFINE int_not_avail_flag .4 | |
| 434 #DEFINE int_high_flag .5 | |
| 435 #DEFINE int_outdated_flag .5 | |
| 436 #DEFINE int_attention_flag .6 | |
| 437 #DEFINE int_warning_flag .7 | |
| 0 | 438 |
| 623 | 439 |
| 0 | 440 ;----------------------------------------------------------------------------- |
| 623 | 441 ; Timebase and Eventbase (stored in access RAM, set by the ISR, trigger flags to be cleared by the application) |
| 634 | 442 ;----------------------------------------------------------------------------- |
| 623 | 443 |
| 444 #DEFINE timebase_0sec timebase,0 ; counting timebase, 1/2 sec bit | |
| 445 #DEFINE timebase_1sec timebase,1 ; counting timebase, 1 sec bit | |
| 446 #DEFINE timebase_2sec timebase,2 ; counting timebase, 2 sec bit | |
| 447 #DEFINE trigger_quarter_second timebase,3 ; =1: a new 1/4 second has begun (not synced with the other time flags, not generated while block_sensor_interrupt is set) | |
| 448 #DEFINE trigger_half_second timebase,4 ; =1: a new 1/2 second has begun | |
| 449 #DEFINE trigger_full_second timebase,5 ; =1: a new 1/1 second has begun | |
| 450 #DEFINE trigger_full_minute timebase,6 ; =1: a new minute has begun | |
| 451 #DEFINE trigger_full_hour timebase,7 ; =1: a new hour has begun | |
| 452 | |
| 453 #DEFINE trigger_isr_updates eventbase,0 ; =1: the ISR had kicked in (set by ISR, used by ISR-safe copy macros) | |
| 454 #DEFINE trigger_timeout eventbase,1 ; =1: timeout signal by timeout service | |
| 455 #DEFINE trigger_sample_divedata eventbase,2 ; =1: time to store a new sample | |
| 456 #DEFINE trigger_S8_data_update eventbase,3 ; =1: new S8 digital data are available | |
| 634 | 457 ; eventbase,4 ; --- unused |
| 623 | 458 #DEFINE trigger_pres_cur_changed eventbase,5 ; =1: current pressure value has changed |
| 459 #DEFINE trigger_pres_max_changed eventbase,6 ; =1: maximum pressure value has changed | |
| 460 #DEFINE trigger_temp_changed eventbase,7 ; =1: temperature value has changed | |
| 461 | |
| 462 | |
| 463 ;----------------------------------------------------------------------------- | |
| 464 ; Flags - stored in access RAM | |
| 634 | 465 ;----------------------------------------------------------------------------- |
| 623 | 466 |
| 467 ;---- Hardware - OSTC Model Descriptor (stored in access RAM, cleared & rebuilt in restart, to preserve compatibility with 3rd party tools DO NOT alter bit positions) | |
| 468 #DEFINE battery_gauge_available HW_descriptor,0 ; =1: OSTC has rechargeable battery with battery management chip | |
| 469 #DEFINE ambient_sensor HW_descriptor,1 ; =1: OSTC has an ambient light sensor | |
| 634 | 470 #DEFINE ext_input_s8_ana HW_descriptor,2 ; =1: OSTC has S8/analog input |
| 471 #DEFINE ext_input_optical HW_descriptor,3 ; =1: OSTC has optical input | |
| 472 #DEFINE ble_available HW_descriptor,4 ; =1: OSTC has an BT module | |
| 623 | 473 #DEFINE ostc_rx_present HW_descriptor,5 ; =1: OSTC has RX module |
| 474 #DEFINE lv_core HW_descriptor,6 ; =1: OSTC has low-voltage core (2.7V) | |
| 634 | 475 #DEFINE flash_block_write HW_descriptor,7 ; =1: OSTC has FLASH with block-write capability |
| 623 | 476 |
| 477 ;---- Hardware - OSTC Model Variants (stored in access RAM, NOT cleared in restart) | |
| 628 | 478 #DEFINE screen_type1 HW_variants,0 ; =1: display type 1, =0; display type 0 |
| 479 #DEFINE screen_type2 HW_variants,1 ; =1: display type 2, =0: display type 0 or 1 | |
| 480 #DEFINE screen_type3 HW_variants,2 ; =1: display type 3, =0: display type 0 or 1 or 2 | |
| 481 #DEFINE compass_type1 HW_variants,3 ; =1: compass type 1, =0: compass type 0 | |
| 482 #DEFINE compass_type2 HW_variants,4 ; =1: compass type 2, =0: compass type 0 or 1 | |
| 483 #DEFINE compass_type3 HW_variants,5 ; =1: compass type 3, =0: compass type 0 or 1 or 2 | |
| 484 #DEFINE analog_switches HW_variants,6 ; =1: analog switches available | |
| 485 #DEFINE battery_is_36v HW_variants,7 ; =1: a 3.6 Volt battery is detected | |
| 624 | 486 |
| 623 | 487 |
| 628 | 488 ;---- Hardware - States 1 (stored in access RAM, cleared on restart) |
| 489 #DEFINE analog_sw1_pressed HW_flags_state1,0 ; =1: analog switch 1 pressed | |
| 490 #DEFINE analog_sw2_pressed HW_flags_state1,1 ; =1: analog switch 2 pressed | |
| 491 #DEFINE switch_left HW_flags_state1,2 ; =1: left button was pressed | |
| 492 #DEFINE switch_right HW_flags_state1,3 ; =1: right button was pressed | |
| 493 #DEFINE flip_screen HW_flags_state1,4 ; =1: screen is shown 180° turned | |
| 494 #DEFINE adc_is_running HW_flags_state1,5 ; =1: the ADC is in use | |
| 495 #DEFINE tft_is_dimming HW_flags_state1,6 ; =1: the TFT is dimming, ignore light sensor | |
| 496 #DEFINE compass_enabled HW_flags_state1,7 ; =1: the compass and accelerometer chip is active | |
| 497 | |
| 498 ;---- Hardware - States 2 (stored in access RAM, NOT cleared on restart) | |
| 499 #DEFINE cc_active HW_flags_state2,0 ; =1: constant current charging active (cR hardware only) | |
| 500 #DEFINE cv_active HW_flags_state2,1 ; =1: constant voltage charging active (cR hardware only) | |
| 631 | 501 #DEFINE i2c_error_flag HW_flags_state2,2 ; =1: an I2C error occurred |
| 502 #DEFINE rs232_rx_timeout HW_flags_state2,3 ; =1: RS232 receive timeout occurred | |
| 634 | 503 #DEFINE battery_low_condition HW_flags_state2,4 ; =1: low battery condition detected |
| 504 #DEFINE flash_wrap_around HW_flags_state2,5 ; =1: address wrap-around control / signalling | |
| 505 #DEFINE flash_wait HW_flags_state2,6 ; =1: wait for flash write operation to complete | |
| 628 | 506 ; HW_flags_state2,7 ; --- unused |
| 623 | 507 |
| 582 | 508 |
| 623 | 509 ;---- Operating System - persistent Settings (stored in access RAM, NOT cleared in restart) |
| 510 #DEFINE sensor1_calibrated_ok OS_flags_persist,0 ; =1: sensor 1 calibration ok | |
| 511 #DEFINE sensor2_calibrated_ok OS_flags_persist,1 ; =1: sensor 2 calibration ok | |
| 512 #DEFINE sensor3_calibrated_ok OS_flags_persist,2 ; =1: sensor 3 calibration ok | |
| 513 #DEFINE compass_bearing_set OS_flags_persist,3 ; =1: compass bearing is set | |
| 514 #DEFINE use_old_batt_flag OS_flags_persist,4 ; =1: load old battery data after power-on reset | |
| 634 | 515 #DEFINE option_changed OS_flags_persist,5 ; =1: option values have been changed, EEPROM needs to be updated |
| 631 | 516 #DEFINE restart_fast OS_flags_persist,6 ; =1: request to skip logos and waits on restart |
| 623 | 517 #DEFINE battery_overtemp OS_flags_persist,7 ; =1: battery charging temperature limit exceeded |
| 518 | |
| 519 | |
| 520 ;---- Operating System - ISR Control 1 (stored in access RAM) | |
| 634 | 521 #DEFINE reset_timebase OS_flags_ISR1,0 ; =1: request ISR to reset the timebase for the trigger flags |
| 522 #DEFINE restart_timeout OS_flags_ISR1,1 ; =1: request ISR to resart the timeout timer | |
| 523 #DEFINE reset_max_pressure OS_flags_ISR1,2 ; =1: request ISR to reset the maximum pressure to zero | |
| 524 #DEFINE reset_surface_interval OS_flags_ISR1,3 ; =1: request ISR to reset the surface interval to zero | |
| 525 #DEFINE reset_trip_pressure OS_flags_ISR1,4 ; =1: request ISR to reset the resettable min/max pressure | |
| 623 | 526 #DEFINE block_rtc_access OS_flags_ISR1,5 ; =1: suspend the ISR from accessing the RTC |
| 527 #DEFINE block_battery_gauge OS_flags_ISR1,6 ; =1: suspend the ISR from updating the battery gauge | |
| 528 #DEFINE block_sensor_interrupt OS_flags_ISR1,7 ; =1: suspend the ISR from executing sensor interrupts | |
| 529 | |
| 530 ;---- Operating System - ISR Control 2 (stored in access RAM) | |
| 531 #DEFINE update_surface_pressure OS_flags_ISR2,0 ; =1: request ISR to update the surface pressure | |
| 532 #DEFINE quit_simulatormode OS_flags_ISR2,1 ; =1: request ISR to quit the simulator mode | |
| 533 #DEFINE count_divetime OS_flags_ISR2,2 ; =1: request ISR to count the dive time | |
| 534 #DEFINE sensor_override_request OS_flags_ISR2,3 ; =1: request ISR to override the pressure sensor with a simulated depth | |
| 634 | 535 #DEFINE tmr5_preemtion_allowed OS_flags_ISR2,4 ; =1: allow preemption of timeout counter |
| 640 | 536 #DEFINE button_hold_down_allowed OS_flags_ISR2,5 ; =1: OSTC uses mechanical push buttons |
| 623 | 537 #DEFINE sensor_override_active OS_flags_ISR2,6 ; =1: ISR output: switch to override-mode confirmed |
| 538 #DEFINE divetime_longer_1min OS_flags_ISR2,7 ; =1: ISR output: dive time is >= one minute | |
| 539 | |
| 540 | |
| 541 ;---- Operating Modes (stored in access RAM, persistent) | |
| 542 #DEFINE sleepmode OM_flags_mode,0 ; =1: in sleep mode | |
| 543 #DEFINE divemode OM_flags_mode,1 ; =1: in dive mode | |
| 544 #DEFINE simulatormode OM_flags_mode,2 ; =1: in simulator mode | |
| 545 #DEFINE high_altitude_mode OM_flags_mode,3 ; =1: unit was manually turned on with absolute pressure < 880 mbar | |
| 634 | 546 ; OM_flags_mode,4 ; --- unused |
| 623 | 547 #DEFINE tr_functions_activated OM_flags_mode,5 ; =1: TR module is available and TR mode is <> off |
| 548 #DEFINE cold_start OM_flags_mode,6 ; =1: restart is entered from a cold start | |
| 549 IFDEF _screendump | |
| 550 #DEFINE screen_dump_avail OM_flags_mode,7 ; =1: screen dump function is available | |
| 551 ELSE | |
| 552 #DEFINE comm_mode_disabled OM_flags_mode,7 ; =1: COMM mode is disabled | |
| 553 ENDIF | |
| 554 | |
| 555 | |
| 556 ;---- Dive Modes - Deco Modes (stored in access RAM) | |
| 557 #DEFINE FLAG_oc_mode DM_flags_deco,0 ; =1: in OC mode active | |
| 558 #DEFINE FLAG_ccr_mode DM_flags_deco,1 ; =1: in CCR mode (fixed ppO2 or sensor) active | |
| 559 #DEFINE FLAG_gauge_mode DM_flags_deco,2 ; =1: in gauge mode | |
| 560 #DEFINE FLAG_apnoe_mode DM_flags_deco,3 ; =1: in apnoe mode | |
| 561 #DEFINE FLAG_pscr_mode DM_flags_deco,4 ; =1: in pSCR mode | |
| 562 #DEFINE bailout_mode DM_flags_deco,5 ; =1: in bailout mode | |
| 563 #DEFINE apnoe_at_surface DM_flags_deco,6 ; =1: at the surface, 0= submerged (apnoe mode only, set/reset by ISR) | |
| 564 #DEFINE apnoe_new_dive DM_flags_deco,7 ; =1: a new dive has begun (apnoe mode only, set by ISR) | |
| 565 | |
| 566 | |
| 567 ;----------------------------------------------------------------------------- | |
| 568 ; Flags - stored in bank common | |
| 634 | 569 ;----------------------------------------------------------------------------- |
| 623 | 570 |
| 571 ;---- Dive Mode - Dive States | |
| 572 #DEFINE use_aGF DM_flags_state,0 ; =1: use aGF, =0: use GF | |
| 631 | 573 #DEFINE deco_locked DM_flags_state,1 ; =1: in or has been in deco obligation during the dive |
| 574 #DEFINE deco_region DM_flags_state,2 ; =1: in or has been in the deco stops region during the dive | |
| 575 #DEFINE cave_mode DM_flags_state,3 ; =1: cave mode is active (cave mode) | |
| 576 #DEFINE dive_turned DM_flags_state,4 ; =1: dive is turned (cave mode) | |
| 577 #DEFINE backtrack_almost_full DM_flags_state,5 ; =1: the backtracking storage is almost full (cave mode) | |
| 578 #DEFINE backtrack_entire_full DM_flags_state,6 ; =1: the backtracking storage is entirely full (cave mode) | |
| 579 #DEFINE backtrack_shutdown DM_flags_state,7 ; =1: the backtracking has shut down due to entirely full (cave mode) | |
| 582 | 580 |
| 640 | 581 ;---- Dive Mode - O2 Sensors & Setpoint |
| 623 | 582 #DEFINE use_O2_sensor1 DM_flags_sensor,0 ; =1: sensor 1 shall be used |
| 583 #DEFINE use_O2_sensor2 DM_flags_sensor,1 ; =1: sensor 2 shall be used | |
| 584 #DEFINE use_O2_sensor3 DM_flags_sensor,2 ; =1: sensor 3 shall be used | |
| 585 #DEFINE voting_logic_sensor1 DM_flags_sensor,3 ; =1: sensor 1 is within the voting logic threshold | |
| 586 #DEFINE voting_logic_sensor2 DM_flags_sensor,4 ; =1: sensor 2 is within the voting logic threshold | |
| 587 #DEFINE voting_logic_sensor3 DM_flags_sensor,5 ; =1: sensor 3 is within the voting logic threshold | |
| 634 | 588 ; DM_flags_sensor,6 ; --- unused |
| 640 | 589 #DEFINE restart_auto_sp DM_flags_sensor,7 ; =1: re-run the auto SP selection from 1st SP |
| 623 | 590 |
| 631 | 591 ;---- Dive Mode - User Requests / General |
| 592 #DEFINE request_gas_change DM_flags_request,0 ; =1: request to change the gas | |
| 593 #DEFINE request_gas_update DM_flags_request,1 ; =1: request to update the gas | |
| 594 #DEFINE request_reset_avg DM_flags_request,2 ; =1: request to reset the average depth | |
| 595 #DEFINE request_next_custview DM_flags_request,3 ; =1: request to show the next custom view | |
| 596 #DEFINE request_back_to_loop DM_flags_request,4 ; =1: request to switch back from bailout to loop | |
| 597 #DEFINE request_toggle_GF DM_flags_request,5 ; =1: request to toggle between GF and aGF | |
| 598 #DEFINE request_set_marker DM_flags_request,6 ; =1: request to set a marker in the logbook | |
| 599 #DEFINE request_restart_engine DM_flags_request,7 ; =1: request to restart the deco engine | |
| 600 | |
| 601 ;---- Dive Mode - User Requests / Cave Mode | |
| 602 #DEFINE request_cave_toggle DM_flags_cavereq,0 ; =1: request to toggle cave mode off/on (cave mode) | |
| 603 #DEFINE request_cave_off_turned DM_flags_cavereq,1 ; =1: request to switch cave mode off (cave mode) | |
| 604 #DEFINE request_turn_toggle DM_flags_cavereq,2 ; =1: request to toggle dive turned state (cave mode) | |
| 605 #DEFINE request_turn_turn DM_flags_cavereq,3 ; =1: request to switch dive turned state to turned (cave mode) | |
| 606 #DEFINE request_waypoint_set DM_flags_cavereq,4 ; =1: request to set a waypoint (cave mode) | |
| 607 #DEFINE request_waypoint_out DM_flags_cavereq,5 ; =1: request to go one waypoint out of the cave (cave mode) | |
| 608 #DEFINE request_waypoint_in DM_flags_cavereq,6 ; =1: request to go one waypoint into the cave (cave mode) | |
| 609 ; DM_flags_cavereq,7 ; --- unused | |
| 623 | 610 |
| 611 ;---- Dive Mode - Data Recording Events | |
| 612 #DEFINE event_occured DM_flags_event,0 ; =1: an event occurred (global indicator flag) | |
| 613 #DEFINE event_gas_change DM_flags_event,1 ; =1: a change to another gas or diluent occurred | |
| 614 #DEFINE event_gas_change_gas6 DM_flags_event,2 ; =1: a change to or of the gas 6 has occurred | |
| 615 #DEFINE event_bailout DM_flags_event,3 ; =1: a change to or of the OC gas occurred due to bailout | |
| 616 #DEFINE event_SP_change DM_flags_event,4 ; =1: a change of the setpoint has occurred | |
| 617 ; DM_flags_event,5 ; --- unused | |
| 631 | 618 ; DM_flags_event,6 ; --- unused |
| 619 ; DM_flags_event,7 ; --- unused | |
| 623 | 620 |
| 621 ;---- Dive Mode - Display Control / Layout | |
| 622 #DEFINE safety_stop_enabled DM_flags_layout1,0 ; =1: safety stop is enabled | |
| 623 #DEFINE safety_stop_active DM_flags_layout1,1 ; =1: safety stop is shown | |
| 624 #DEFINE decostop_active DM_flags_layout1,2 ; =1: decompression stop is shown | |
| 625 #DEFINE velocity_active_num DM_flags_layout1,3 ; =1: numerical velocity indicator is shown | |
| 626 #DEFINE velocity_active_vsi DM_flags_layout1,4 ; =1: graphical velocity indicator is shown | |
| 627 #DEFINE alt_layout_active DM_flags_layout1,5 ; =1: the alternative dive layout is used (aka "blind mode") | |
| 628 #DEFINE neg_flag_velocity DM_flags_layout1,6 ; =1: descending, used by velocity logic | |
| 629 #DEFINE show_only_divemins DM_flags_layout1,7 ; =1: only dive minutes are shown | |
| 630 | |
| 631 #DEFINE cur_depth_greater_100m DM_flags_layout2,0 ; =1: current depth > 100 meters | |
| 632 #DEFINE max_depth_greater_100m DM_flags_layout2,1 ; =1: max. depth > 100 meters | |
| 634 | 633 #DEFINE depth_color_attention DM_flags_layout2,2 ; =1: show depth in attention color |
| 634 #DEFINE depth_color_warning DM_flags_layout2,3 ; =1: show depth in warning color | |
| 635 #DEFINE depth_color_last DM_flags_layout2,4 ; =1: last depth was shown in warning or attention color | |
| 623 | 636 #DEFINE depth_inverse_last DM_flags_layout2,5 ; =1: last depth was shown in inverse |
| 634 | 637 #DEFINE gas_needs_mode_last DM_flags_layout2,6 ; =1: last gas needs were computed for cave mode, =0: vertical ascent |
| 638 #DEFINE tts_over_99_last DM_flags_layout2,7 ; =1: last TTS was > 99 minutes | |
| 623 | 639 |
| 631 | 640 #DEFINE tissue_graphic_layout DM_flags_layout3,0 ; =1: show pres+sat, =0: show N2/He pressures |
| 641 #DEFINE tissue_graphic_gf DM_flags_layout3,1 ; =1: show GF lines | |
| 642 #DEFINE tissue_graphic_cns DM_flags_layout3,2 ; =1: shwo CNS value (surface mode graphic only) | |
| 643 #DEFINE tissue_graphic_mode DM_flags_layout3,3 ; =1: logbook mode (surface mode graphic only) | |
| 644 ; DM_flags_layout3,4 ; --- unused | |
| 645 ; DM_flags_layout3,5 ; --- unused | |
| 646 ; DM_flags_layout3,6 ; --- unused | |
| 647 ; DM_flags_layout3,7 ; --- unused | |
| 648 | |
| 649 | |
| 650 ;---- Dive Mode - Display Control / Gas, Diluent, Depth | |
| 623 | 651 #DEFINE better_gas_hint DM_flags_gas_dil,0 ; =1: mark a gas when it is a better gas |
| 631 | 652 #DEFINE color_code_gases DM_flags_gas_dil,1 ; =1: color code the gases by ppO2 & current depth |
| 653 #DEFINE better_gas_available DM_flags_gas_dil,2 ; =1: a better gas is available | |
| 654 #DEFINE better_gas_blinking DM_flags_gas_dil,3 ; =1: gas is blinking | |
| 655 #DEFINE better_dil_available DM_flags_gas_dil,4 ; =1: a better diluent is available | |
| 656 #DEFINE better_dil_blinking DM_flags_gas_dil,5 ; =1: diluent is blinking | |
| 657 #DEFINE gas6_or_EXIT DM_flags_gas_dil,6 ; =1: exit menu, =0: provide gas6 option | |
| 634 | 658 ; DM_flags_gas_dil,7 ; --- unused |
| 659 | |
| 660 | |
| 661 ;---- Dive Mode - Display Control / Messages | |
| 662 #DEFINE sign_shown DM_flags_message,0 ; =1: the warning/attention/advice sign is shown | |
| 663 #DEFINE sign_advice DM_flags_message,1 ; =1: the sign shown is an advice sign | |
| 664 #DEFINE sign_attention DM_flags_message,2 ; =1: the sign shown is an attention sign | |
| 665 #DEFINE sign_warning DM_flags_message,3 ; =1: the sign shown is a warning sign | |
| 666 #DEFINE message_2nd_row_used DM_flags_message,4 ; =1: the second row contains a warning/attention/advice | |
| 667 ; DM_flags_message,5 ; --- unused | |
| 668 ; DM_flags_message,6 ; --- unused | |
| 669 ; DM_flags_message,7 ; --- unused | |
| 670 | |
| 671 | |
| 672 ;---- Dive Mode - Display Control / Advices | |
| 673 #DEFINE advc_det_change_gas DM_flags_advc_det,0 ; =1: change gas advice | |
| 674 #DEFINE advc_det_switch_tank DM_flags_advc_det,1 ; =1: change tank advice | |
| 675 ; DM_flags_advc_det,2 ; --- unused | |
| 676 ; DM_flags_advc_det,3 ; --- unused | |
| 677 ; DM_flags_advc_det,4 ; --- unused | |
| 678 ; DM_flags_advc_det,5 ; --- unused | |
| 679 ; DM_flags_advc_det,6 ; --- unused | |
| 680 ; DM_flags_advc_det,7 ; --- unused | |
| 681 | |
| 682 | |
| 683 ;---- Dive Mode - Display Control / Attentions | |
| 684 #DEFINE attn_det_gas_needs DM_flags_att1_det,0 ; =1: gas needs attention threshold reached | |
| 685 #DEFINE attn_det_ppo2_breathed DM_flags_att1_det,1 ; =1: breathed ppO2 attention threshold reached | |
| 686 #DEFINE attn_det_ppo2_diluent DM_flags_att1_det,2 ; =1: diluent ppO2 attention threshold reached | |
| 687 #DEFINE attn_det_cns_current DM_flags_att1_det,3 ; =1: current CNS attention threshold reached | |
| 688 #DEFINE attn_det_gas_density DM_flags_att1_det,4 ; =1: gas density attention threshold reached | |
| 689 #DEFINE attn_det_saturation DM_flags_att1_det,5 ; =1: tissue saturation attention threshold reached | |
| 690 #DEFINE attn_det_outside DM_flags_att1_det,6 ; =1: outside model attention issued | |
| 691 #DEFINE attn_det_microbubble DM_flags_att1_det,7 ; =1: µ-bubble attention issued | |
| 692 | |
| 693 #DEFINE attn_det_sac_rate DM_flags_att2_det,0 ; =1: SAC rate attention threshold reached | |
| 694 #DEFINE attn_det_pressure1 DM_flags_att2_det,1 ; =1: tank 1 pressure attention threshold reached | |
| 695 #DEFINE attn_det_pressure2 DM_flags_att2_det,2 ; =1: tank 2 pressure attention threshold reached | |
| 696 #DEFINE attn_det_ibcd DM_flags_att2_det,3 ; =1: IBCD attention issued | |
| 697 #DEFINE attn_det_cave_shut_down DM_flags_att2_det,4 ; =1: cave mode shutdown attention issued | |
| 698 #DEFINE attn_det_sensor1_lost DM_flags_att2_det,5 ; =1: sensor 1 lost attention issued | |
| 699 #DEFINE attn_det_sensor2_lost DM_flags_att2_det,6 ; =1: sensor 2 lost attention issued | |
| 700 #DEFINE attn_det_sensor3_lost DM_flags_att2_det,7 ; =1: sensor 3 lost attention issued | |
| 701 | |
| 702 #DEFINE attn_det_xmit1_bat DM_flags_att3_det,0 ; =1: xmitter 1 low batt attention issued | |
| 703 #DEFINE attn_det_xmit2_bat DM_flags_att3_det,1 ; =1: xmitter 2 low batt attention issued | |
| 704 #DEFINE attn_det_cns_eod DM_flags_att3_det,2 ; =1: end-of-dive CNS attention threshold reached | |
| 705 ; DM_flags_att3_det,3 ; --- unused | |
| 706 ; DM_flags_att3_det,4 ; --- unused | |
| 707 ; DM_flags_att3_det,5 ; --- unused | |
| 708 ; DM_flags_att3_det,6 ; --- unused | |
| 709 ; DM_flags_att3_det,7 ; --- unused | |
| 710 | |
| 711 ;---- Dive Mode - Display Control / Warnings | |
| 712 #DEFINE warn_det_gas_needs DM_flags_war1_det,0 ; =1: gas needs warning threshold reached | |
| 713 #DEFINE warn_det_ppO2_breathed DM_flags_war1_det,1 ; =1: breathed ppO2 warning threshold reached | |
| 714 #DEFINE warn_det_ppO2_diluent DM_flags_war1_det,2 ; =1: diluent ppO2 warning threshold reached | |
| 715 #DEFINE warn_det_cns_current DM_flags_war1_det,3 ; =1: current CNS warning threshold reached | |
| 716 #DEFINE warn_det_gas_density DM_flags_war1_det,4 ; =1: gas density warning threshold reached | |
| 717 #DEFINE warn_det_saturation DM_flags_war1_det,5 ; =1: tissue saturation warning threshold reached | |
| 718 #DEFINE warn_det_outside DM_flags_war1_det,6 ; =1: outside model warning issued | |
| 719 #DEFINE warn_det_microbubble DM_flags_war1_det,7 ; =1: µ-bubble warning issued | |
| 720 | |
| 721 #DEFINE warn_det_cave_shut_down DM_flags_war2_det,0 ; =1: cave mode shutdown warning issued | |
| 722 #DEFINE warn_det_pressure1 DM_flags_war2_det,1 ; =1: tank pressure 1 warning threshold reached | |
| 723 #DEFINE warn_det_pressure2 DM_flags_war2_det,2 ; =1: tank pressure 2 warning threshold reached | |
| 724 #DEFINE warn_det_batt_low DM_flags_war2_det,3 ; =1: battery low warning issued | |
| 725 #DEFINE warn_det_depth_limit DM_flags_war2_det,4 ; =1: depth limit warning issued | |
| 726 #DEFINE warn_det_sensors_lost DM_flags_war2_det,5 ; =1: sensors lost warning issued | |
| 727 #DEFINE warn_det_sensors_div DM_flags_war2_det,6 ; =1: sensors divergence warning issued | |
| 728 #DEFINE warn_det_no_bo_gas DM_flags_war2_det,7 ; =1: no B/O gas avail warning issued | |
| 729 | |
| 730 | |
| 731 ;---- Dive Mode - Display Control / Custom View automatic show-up | |
| 732 #DEFINE shown_gas_needs_attn DM_flags_shown1,0 ; =1: gas needs attention has been shown before | |
| 733 #DEFINE shown_gas_needs_warn DM_flags_shown1,1 ; =1: gas needs warning has been shown before | |
| 734 #DEFINE shown_sensors_diverg DM_flags_shown1,2 ; =1: sensor divergence has been shown before | |
| 735 #DEFINE shown_sensors_lost DM_flags_shown1,3 ; =1: sensor all lost has been shown before | |
| 736 #DEFINE shown_sensor1_fail DM_flags_shown1,4 ; =1: sensor 1 failure has been shown before | |
| 737 #DEFINE shown_sensor2_fail DM_flags_shown1,5 ; =1: sensor 2 failure has been shown before | |
| 738 #DEFINE shown_sensor3_fail DM_flags_shown1,6 ; =1: sensor 3 failure has been shown before | |
| 739 ; DM_flags_shown1,7 ; --- unused | |
| 740 | |
| 741 #DEFINE shown_xmit1_lost DM_flags_shown2,0 ; =1: xmitter 1 lost has been shown before | |
| 742 #DEFINE shown_xmit1_battery DM_flags_shown2,1 ; =1: xmitter 1 batt low has been shown before | |
| 743 #DEFINE shown_xmit1_pres_warn DM_flags_shown2,2 ; =1: xmitter 1 pres warn has been shown before | |
| 744 #DEFINE shown_xmit1_pres_attn DM_flags_shown2,3 ; =1: xmitter 1 pres attn has been shown before | |
| 745 #DEFINE shown_xmit2_lost DM_flags_shown2,4 ; =1: xmitter 2 lost has been shown before | |
| 746 #DEFINE shown_xmit2_battery DM_flags_shown2,5 ; =1: xmitter 2 batt low has been shown before | |
| 747 #DEFINE shown_xmit2_pres_warn DM_flags_shown2,6 ; =1: xmitter 2 pres warn has been shown before | |
| 748 #DEFINE shown_xmit2_pres_attn DM_flags_shown2,7 ; =1: xmitter 2 pres attn has been shown before | |
| 749 | |
| 750 #DEFINE shown_gas_density_attn DM_flags_shown3,0 ; =1: gas density atten. has been shown before | |
| 751 #DEFINE shown_gas_density_warn DM_flags_shown3,1 ; =1: gas density warning has been shown before | |
| 752 ; DM_flags_shown3,2 ; --- unused | |
| 753 ; DM_flags_shown3,3 ; --- unused | |
| 754 ; DM_flags_shown3,4 ; --- unused | |
| 755 ; DM_flags_shown3,5 ; --- unused | |
| 756 ; DM_flags_shown3,6 ; --- unused | |
| 757 ; DM_flags_shown3,7 ; --- unused | |
| 758 | |
| 623 | 759 |
| 760 ;---- Menu System - Control | |
| 634 | 761 #DEFINE surfmode_menu MS_flags_control,0 ; =1: surface menu is shown (i.e. returning from it) |
| 762 #DEFINE dive_pre_menu MS_flags_control,1 ; =1: dive pre-menu is shown (e.g. "Menu?") | |
| 763 #DEFINE dive_main_menu MS_flags_control,2 ; =1: dive main menu is shown (i.e. the "big" menu) | |
| 623 | 764 #DEFINE compass_menu MS_flags_control,3 ; =1: "set bearing" is shown |
| 765 #DEFINE is_diluent_menu MS_flags_control,4 ; =1: setting up diluents, =0: setting up OC gases | |
| 766 #DEFINE is_bailout_menu MS_flags_control,5 ; =1: in bailout menu | |
| 631 | 767 #DEFINE custom_view_locked MS_flags_control,6 ; =1: the custom view is locked (defer CV auto-popup) |
| 634 | 768 #DEFINE option_stop_at_max MS_flags_control,7 ; =1: option increment will stop at max value (no wrap around) |
| 623 | 769 |
| 770 ;---- Menu System - Data Imprinting | |
| 771 #DEFINE imprint_time_date MS_flags_imprint,0 ; =1: imprint current time & date | |
| 772 #DEFINE imprint_color_schemes MS_flags_imprint,1 ; =1: imprint color schemes | |
| 773 #DEFINE imprint_sensor_mv MS_flags_imprint,2 ; =1: imprint O2 sensor mV data | |
| 774 #DEFINE imprint_xmitter_pres MS_flags_imprint,3 ; =1: imprint transmitter pressure data | |
| 775 #DEFINE imprint_xmitter_ID MS_flags_imprint,4 ; =1: in transmitter-to-tank pairing menu | |
| 776 #DEFINE imprint_surfmode_data MS_flags_imprint,5 ; =1: imprint surface mode data | |
| 634 | 777 #DEFINE block_option_value MS_flags_imprint,6 ; =1: suspend displaying of option values |
| 778 #DEFINE short_gas_descriptions MS_flags_imprint,7 ; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint | |
| 623 | 779 |
| 0 | 780 |
| 623 | 781 ;---- Font & Image System |
| 782 #DEFINE aa_antialias AA_flags,0 ; used by aa_wordprocessor | |
| 783 #DEFINE aa_color_quarter AA_flags,1 ; used by aa_wordprocessor | |
| 784 #DEFINE aa_color_half AA_flags,2 ; used by aa_wordprocessor | |
| 785 #DEFINE aa_aux_flag AA_flags,3 ; auxiliary flag for various purposes | |
| 786 #DEFINE use_custom_colors AA_flags,4 ; =1: override default pixel colors, used by color_image | |
| 634 | 787 #DEFINE win_invert AA_flags,5 ; =1: print in inverse video |
| 623 | 788 ; AA_flags,6 ; --- unused |
| 789 ; AA_flags,7 ; --- unused | |
| 790 | |
| 791 | |
| 634 | 792 ;---- Convert Functions (Control of numerical Output) |
| 793 | |
| 794 #DEFINE hide_digit5 CVT_flags1,0 ; =1: do not print digit 5 (clip output at 9999) | |
| 795 #DEFINE hide_digit4 CVT_flags1,1 ; =1: do not print digits 5-4 (clip output at 999) | |
| 796 #DEFINE hide_digit3 CVT_flags1,2 ; =1: do not print digits 5-3 (clip output at 99) | |
| 797 #DEFINE hide_digit2 CVT_flags1,3 ; =1: do not print digits 5-2 (clip output at 9) | |
| 798 #DEFINE omit_digit_1 CVT_flags1,4 ; =1: do not print digit 1 (show output as xxxx-) | |
| 799 #DEFINE omit_digit_2 CVT_flags1,5 ; =1: do not print digits 2-1 (show output as xxx--) | |
| 631 | 800 ; CVT_flags1,6 ; --- unused |
| 623 | 801 ; CVT_flags1,7 ; --- unused |
| 0 | 802 |
| 634 | 803 #DEFINE decimal_digit1 CVT_flags2,0 ; =1: put a decimal point in front of digit 1 |
| 804 #DEFINE decimal_digit2 CVT_flags2,1 ; =1: put a decimal point in front of digit 2 | |
| 805 #DEFINE decimal_digit3 CVT_flags2,2 ; =1: put a decimal point in front of digit 3 | |
| 806 ; CVT_flags2,3 ; --- unused | |
| 807 #DEFINE leftbind CVT_flags2,4 ; =1: align output to the left (no leading spaces) | |
| 808 #DEFINE leading_zeros CVT_flags2,5 ; =1: print leading zeros | |
| 809 #DEFINE output_overflow CVT_flags2,6 ; =1: the printed number is clipped to 9999/999/99/9 | |
| 810 ; CVT_flags2,7 ; --- unused | |
| 623 | 811 |
| 812 | |
| 631 | 813 ;---- Miscellaneous Flags |
| 623 | 814 #DEFINE ignore_last_edited_gas misc_flags,0 ; =1: ignore last edited gas while cleaning up gas/dil list |
| 815 #DEFINE copying_dil misc_flags,1 ; =1: copying a diluent | |
| 631 | 816 #DEFINE comm_service_mode misc_flags,2 ; =1: service mode (extended command set) is enabled |
| 817 #DEFINE waypoint_reached_first misc_flags,3 ; =1: the first (most outside) waypoint is reached (cave mode) | |
| 818 #DEFINE waypoint_reached_last misc_flags,4 ; =1: the last (most inside) waypoint is reached (cave mode) | |
| 634 | 819 #DEFINE option_value_ok misc_flags,5 ; =1: option value was checked to be within min/max limits |
| 820 #DEFINE aux_flag misc_flags,6 ; local flag, used in various places | |
| 821 #DEFINE neg_flag misc_flags,7 ; =1: result is negative | |
| 822 | |
| 623 | 823 |
| 824 ;---- HUD Status Byte (stored in access RAM) | |
| 604 | 825 #DEFINE hud_connection_ok hud_status_byte,0 ; =1 HUD connection ok |
| 826 ; hud_status_byte,1 ; =1 HUD is calibrated | |
| 623 | 827 ; hud_status_byte,2 ; =1 HUD battery is low (< 3000 mV) |
| 604 | 828 #DEFINE sensor1_active hud_status_byte,3 ; =1: sensor 1 is active |
| 829 #DEFINE sensor2_active hud_status_byte,4 ; =1: sensor 2 is active | |
| 830 #DEFINE sensor3_active hud_status_byte,5 ; =1: sensor 3 is active | |
| 831 ; hud_status_byte,6 ; --- unused in stand-alone HUD | |
| 832 ; hud_status_byte,7 ; --- unused in stand-alone HUD | |
| 0 | 833 |
| 582 | 834 |
| 634 | 835 ;----------------------------------------------------------------------------- |
| 836 ; Macros | |
| 837 ;----------------------------------------------------------------------------- | |
| 582 | 838 |
| 634 | 839 ; ---- options checking |
| 631 | 840 |
| 623 | 841 TSTOSS macro opt_reg ; TeST Option Skip next instruction if Set (not zero) |
| 631 | 842 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 843 tstfsz EEDATA,A ; Attention: must be followed by a plain machine | |
| 623 | 844 bra $+4 ; command, do not let follow a macro! |
| 845 endm ; | |
| 846 | |
| 847 TSTOSC macro opt_reg ; TeST Option Skip next instruction if Clear (zero) | |
| 631 | 848 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 849 tstfsz EEDATA,A ; Attention: must be followed by a plain machine | |
| 623 | 850 endm ; command, do not let follow a macro! |
| 851 | |
| 852 | |
| 634 | 853 ; ---- literal operations |
| 631 | 854 |
| 855 CLRI macro address ; CLeaR Integer (version of clrf for 2 byte integers) | |
| 856 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 857 clrf address+1 ; | |
| 858 endm ; | |
| 859 | |
| 860 CLRT macro address ; CLeaR Three byte integer (version of clrf for 3 byte integers) | |
| 861 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 862 clrf address+1 ; | |
| 863 clrf address+2 ; | |
| 623 | 864 endm ; |
| 865 | |
| 631 | 866 CLRR macro address,range ; CLeaR a Range of bytes (version of clrf for 1-256 bytes) |
| 867 movlw low(range) ; initialize loop counter | |
| 868 lfsr FSR1,address ; set start address | |
| 869 extern memory_clear | |
| 870 call memory_clear | |
| 871 endm | |
| 623 | 872 |
| 631 | 873 SETI macro address ; SET Integer (version of setf for 2 byte integers) |
| 874 setf address+0 ; Attention: must be in bank where target variable resides! | |
| 875 setf address+1 ; | |
| 623 | 876 endm ; |
| 877 | |
| 631 | 878 MOVLI macro literal,address ; MOVe Literal to Integer |
| 879 movlw LOW (literal) ; Attention: destroys WREG! | |
| 880 movwf address+0 ; Attention: must be in bank where target variable resides! | |
| 881 movlw HIGH (literal) ; | |
| 882 movwf address+1 ; | |
| 623 | 883 endm ; |
| 884 | |
| 885 | |
| 634 | 886 ; ---- arithetics |
| 631 | 887 |
| 888 INCI macro address ; INCrement Integer (version of incf for 2 byte integers) | |
| 889 infsnz address+0,F ; Attention: must be in bank where target variable resides! | |
| 890 incf address+1,F ; | |
| 623 | 891 endm ; |
| 892 | |
| 631 | 893 DECI macro address ; DECrement Integer (version of decf for 2 byte integers) |
| 623 | 894 movlw .1 ; Attention: destroys WREG! |
| 631 | 895 subwf address+0,F ; Attention: must be in bank where target variable resides! |
| 623 | 896 movlw .0 ; |
| 631 | 897 subwfb address+1,F ; |
| 898 endm ; | |
| 899 | |
| 900 ADDLI macro literal, address ; ADD Literal to Integer | |
| 901 movlw LOW (literal) ; Attention: destroys WREG! | |
| 902 addwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 903 movlw HIGH (literal) ; | |
| 904 addwfc address+1,F ; | |
| 905 endm ; | |
| 906 | |
| 907 SUBLI macro literal, address ; SUBtract Literal from Integer | |
| 908 movlw LOW (literal) ; Attention: destroys WREG! | |
| 909 subwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 910 movlw HIGH (literal) ; | |
| 911 subwfb address+1,F ; | |
| 623 | 912 endm ; |
| 913 | |
| 914 | |
| 634 | 915 ; ---- moves |
| 631 | 916 |
| 917 MOVCC macro from,to ; MOVe 1 byte Char (actually an alias for movff) | |
| 918 movff from,to | |
| 919 endm | |
| 920 | |
| 921 MOVII macro from,to ; MOVe 2 byte Integer (version of movff for 2 bytes) | |
| 922 movff from+0,to+0 ; copy 1st byte | |
| 923 movff from+1,to+1 ; copy 2nd byte | |
| 623 | 924 endm ; |
| 925 | |
| 631 | 926 MOVTT macro from,to ; MOVe Three byte Integer (version of movff for 3 bytes) |
| 927 movff from+0,to+0 ; copy 1st byte | |
| 928 movff from+1,to+1 ; copy 2nd byte | |
| 929 movff from+2,to+2 ; copy 3rd byte | |
| 930 endm ; | |
| 931 | |
| 932 MOVRR macro from,to,range ; MOVe a Range of bytes (version of movff for 1-256 bytes) | |
| 933 movlw low(range) ; initialize loop counter | |
| 934 lfsr FSR1,from ; from | |
| 935 lfsr FSR2,to ; to | |
| 936 extern memory_move | |
| 937 call memory_move | |
| 938 endm | |
| 939 | |
| 623 | 940 |
| 634 | 941 ; ---- ISR-safe moves |
| 623 | 942 |
| 631 | 943 SMOVII macro from, to ; isr-Safe MOVe 2 byte Integer (version of MOVII for ISR-safe copying) |
| 623 | 944 local retry ; |
| 945 retry: | |
| 946 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 947 movff from+0,to+0 ; copy low byte | |
| 948 movff from+1,to+1 ; copy high byte | |
| 949 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 950 bra retry ; YES - retry copy | |
| 951 endm ; NO - done | |
| 952 | |
| 631 | 953 SMOVTT macro from, to ; isr-Safe MOVe Three byte integer (version of MOVTT for ISR-safe copying) |
| 623 | 954 local retry ; |
| 955 retry: | |
| 956 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 957 movff from+0,to+0 ; copy low byte | |
| 958 movff from+1,to+1 ; copy high byte | |
| 959 movff from+2,to+2 ; copy upper byte | |
| 960 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 961 bra retry ; YES - retry copy | |
| 962 endm ; NO - done | |
| 963 | |
| 631 | 964 SMOVQQ macro from, to ; isr-Safe MOVe Quad byte integer (version of MOVII for ISR-safe copying) |
| 623 | 965 local retry ; |
| 966 retry: | |
| 967 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 968 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 969 movff from+1,to+1 ; copy byte 1 | |
| 970 movff from+2,to+2 ; copy byte 2 | |
| 971 movff from+3,to+3 ; copy byte 3 (MSB) | |
| 972 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 973 bra retry ; YES - retry copy | |
| 974 endm ; NO - done | |
| 975 | |
| 976 SMOVSS macro from, to ; isr-Safe MOVe Six byte integer to integer (version of MOVII for integers updated in ISR) | |
| 977 local retry ; | |
| 978 retry: | |
| 979 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 980 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 981 movff from+1,to+1 ; copy byte 1 | |
| 982 movff from+2,to+2 ; copy byte 2 | |
| 983 movff from+3,to+3 ; copy byte 3 | |
| 984 movff from+4,to+4 ; copy byte 4 | |
| 985 movff from+5,to+5 ; copy byte 5 (MSB) | |
| 986 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 987 bra retry ; YES - retry copy | |
| 988 endm ; NO - done | |
| 989 | |
| 582 | 990 |
| 634 | 991 ;----------------------------------------------------------------------------- |
| 992 ; C-Code Routines | |
| 993 ;----------------------------------------------------------------------------- | |
| 582 | 994 |
| 995 extern deco_calc_desaturation_time | |
| 996 extern deco_calc_hauptroutine | |
| 604 | 997 extern deco_calc_dive_interval |
| 582 | 998 extern deco_calc_dive_interval_1min |
| 999 extern deco_calc_dive_interval_10min | |
| 1000 extern deco_clear_tissue | |
| 623 | 1001 extern deco_init_output_vars |
| 582 | 1002 extern deco_pull_tissues_from_vault |
| 1003 extern deco_push_tissues_to_vault | |
| 560 | 1004 |
| 1005 | |
| 634 | 1006 ;----------------------------------------------------------------------------- |
| 1007 ; Bank0 ACCESS RAM | |
| 1008 ;----------------------------------------------------------------------------- | |
| 623 | 1009 |
| 1010 ; Variables located in the Access Bank are declared in hwos.asm | |
| 1011 | |
| 634 | 1012 ifndef INSIDE_HWOS_ASM |
| 623 | 1013 |
| 1014 extern HW_descriptor | |
| 1015 extern HW_variants | |
| 1016 | |
| 628 | 1017 extern HW_flags_state1 |
| 1018 extern HW_flags_state2 | |
| 623 | 1019 |
| 1020 extern OS_flags_persist | |
| 1021 extern OS_flags_ISR1 | |
| 1022 extern OS_flags_ISR2 | |
| 1023 | |
| 1024 extern OM_flags_mode | |
| 1025 | |
| 1026 extern DM_flags_deco | |
| 1027 | |
| 1028 extern cpu_speed_request | |
| 1029 extern cpu_speed_state | |
| 1030 | |
| 1031 extern timebase | |
| 1032 extern eventbase | |
| 604 | 1033 |
| 623 | 1034 extern isr_timeout_timer |
| 1035 extern isr_timeout_reload | |
| 1036 | |
| 1037 extern total_divetime_secs | |
| 1038 extern counted_divetime_mins | |
| 1039 extern counted_divetime_secs | |
| 1040 | |
| 1041 extern apnoe_surface_secs | |
| 1042 extern apnoe_surface_mins | |
| 1043 extern apnoe_dive_secs | |
| 1044 extern apnoe_dive_mins | |
| 1045 | |
| 1046 extern sampling_rate | |
| 1047 extern sampling_timer | |
| 1048 | |
| 1049 extern simulatormode_depth | |
| 1050 | |
| 1051 extern hud_status_byte | |
| 1052 extern hud_battery_mv | |
| 1053 | |
| 634 | 1054 extern battery_capacity_internal |
| 1055 extern battery_capacity | |
| 1056 extern battery_offset | |
| 1057 extern battery_type | |
| 1058 extern battery_accumulated_charge | |
| 1059 extern battery_temperature | |
| 1060 extern gauge_status_byte | |
| 1061 | |
| 631 | 1062 endif ; ACCESS_RAM_VARS |
| 623 | 1063 |
| 634 | 1064 ;----------------------------------------------------------------------------- |
| 1065 ; Bank0 NORMAL RAM | |
| 1066 ;----------------------------------------------------------------------------- | |
| 1067 | |
| 623 | 1068 isr_backup equ 0x060 ; Alias for "banksel isr_backup" |
| 1069 isr_backup udata_ovr isr_backup ; Bank 0 ISR data | |
| 604 | 1070 |
| 631 | 1071 ;---- Backup for general Registers, used by ISR Routines |
| 623 | 1072 PROD_backup res 2 |
| 1073 FSR0_backup res 2 | |
| 1074 BSR_backup res 1 | |
| 1075 | |
| 631 | 1076 ;---- Multi-Purpose Registers, used by ISR Routines |
| 623 | 1077 isr_mpr res 2 ; used in ms5541.asm and isr.asm |
| 631 | 1078 #DEFINE isr_lo isr_mpr+0 ; ... |
| 1079 #DEFINE isr_hi isr_mpr+1 ; ... | |
| 1080 | |
| 1081 ;---- Multi-Purpose Registers, NOT USED by ISR Routines | |
| 1082 backup_mpr res 2 ; used in rtc.asm | |
| 1083 #DEFINE backup_lo backup_mpr+0 | |
| 1084 #DEFINE backup_hi backup_mpr+1 | |
| 1085 | |
| 623 | 1086 |
| 1087 ;---- Time and Date - Real Time Clock | |
| 1088 rtc_year res 1 ; running year | Attention: | |
| 1089 rtc_month res 1 ; running month | do not change | |
| 1090 rtc_day res 1 ; running day | the Position of | |
| 1091 rtc_hour res 1 ; running hour | these Variables | |
| 1092 rtc_mins res 1 ; running minute | relative to | |
| 1093 rtc_secs res 1 ; running second | each other! | |
| 582 | 1094 |
| 623 | 1095 rtc_latched_year res 1 ; latched year | Attention: |
| 1096 rtc_latched_month res 1 ; latched month | do not change | |
| 1097 rtc_latched_day res 1 ; latched day | the Position of | |
| 1098 rtc_latched_hour res 1 ; latched hour | these Variables | |
| 1099 rtc_latched_mins res 1 ; latched minute | relative to | |
| 1100 rtc_latched_secs res 1 ; latched second | each other! | |
| 1101 | |
| 1102 ;--- RTC-independent Timebase | |
| 1103 timebase_mins res 1 ; RTC-independent timer for generating the every hour trigger | |
| 1104 timebase_secs res 1 ; RTC-independent timer for generating the every minute trigger | |
| 1105 | |
| 1106 ;---- other Timers | |
| 1107 uptime res 4 ; [sec] uptime of the OSTC since last cold start | |
| 629 | 1108 surface_interval_secs res 4 ; [sec] surface interval counted in seconds |
| 1109 surface_interval_mins res 2 ; [min] surface interval counted in minutes | |
| 623 | 1110 simulator_time res 1 ; [min] real runtime of the simulator |
| 1111 | |
| 1112 ;---- Data for Pressure and Temperature Calculation (MS5541) | |
| 1113 clock_count res 1 ; I2C clock pulse counter | |
| 1114 sensor_state_counter res 1 ; counter for pressure sensor state machine | |
| 1115 dLSB res 1 ; pressure sensor interface, LSB | |
| 1116 dMSB res 1 ; pressure sensor interface, MSB | |
| 1117 dbuffer res 1 ; pressure sensor interface, RX/TX buffer | |
| 582 | 1118 |
| 604 | 1119 C1 res 2 ; decoded calibration data |
| 623 | 1120 C2 res 2 ; decoded calibration data |
| 1121 C3 res 2 ; decoded calibration data | |
| 1122 C4 res 2 ; decoded calibration data, here C4-250 | |
| 1123 C5 res 2 ; decoded calibration data, here reference temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) | |
| 1124 C6 res 2 ; decoded calibration data | |
| 582 | 1125 D1 res 2 ; raw pressure |
| 1126 D2 res 2 ; raw temperature | |
| 1127 xdT res 2 | |
| 1128 xdT2 res 2 | |
| 1129 OFF res 2 | |
| 1130 SENS res 2 | |
| 623 | 1131 |
| 1132 temperature_cur res 2 ; current temperature | |
| 1133 temperature_min res 2 ; minimum temperature (operated by divemode.asm) | |
| 1134 temperature_avg res 2 ; internal register used for averaging | |
| 1135 temperature_last res 2 ; internal register used for detecting changes | |
| 1136 | |
| 1137 pressure_abs res 2 ; current absolute pressure | |
| 1138 pressure_abs_avg res 2 ; internal register used for averaging | |
| 1139 pressure_abs_last res 2 ; internal register used for detecting pressure changes | |
| 1140 | |
| 1141 pressure_abs_sampled res 2 ; sampled surface pressure, sampled in sleep mode every 15 minutes | |
| 1142 pressure_abs_ref res 2 ; reference surface pressure, surface pressure sampled 15 minutes ago | |
| 1143 pressure_surf res 2 ; surface pressure used by ISR to calculate relative pressures | |
| 1144 | |
| 1145 pressure_rel_cur res 2 ; current relative pressure | |
| 1146 pressure_rel_max res 2 ; maximum relative pressure | |
| 1147 pressure_rel_sim res 2 ; simulated relative pressure (simulator mode) | |
| 582 | 1148 |
| 604 | 1149 ;---- Data for ISR Math Subroutines |
| 623 | 1150 isr_xA res 2 ; multiplicand 1 |
| 1151 isr_xB res 2 ; multiplicand 2 | |
| 1152 isr_xC res 4 ; resulting product | |
| 582 | 1153 |
| 604 | 1154 ;---- Display Brightness |
| 623 | 1155 ambient_light res 2 ; ambient light level |
| 604 | 1156 max_CCPR1L res 1 ; max. brightness value for CCPR1L |
| 582 | 1157 |
| 604 | 1158 ;---- Battery Gauge (nAs, nC) |
| 1159 battery_gauge res 6 ; 48 bit -> 78 Ah max | |
| 582 | 1160 |
| 604 | 1161 ;---- IR/S8-Link |
| 623 | 1162 ir_s8_buffer res .18 ; buffer for data received on IR/S8 interface, |
| 1163 ; also used to buffer MS5541 raw calibration data | |
| 1164 | |
| 1165 IFDEF _external_sensor | |
| 582 | 1166 ir_s8_counter res 1 |
| 604 | 1167 ir_s8_timeout res 1 ; timeout for valid data |
| 623 | 1168 ENDIF |
| 582 | 1169 |
| 623 | 1170 ;---- raw O2 Sensor Data received on S8 Link |
| 1171 IFDEF _external_sensor | |
| 1172 s8_rawdata_sensor1 res 3 ; 24 bit A/D raw data from S8 HUD sensor 1 | |
| 1173 s8_rawdata_sensor2 res 3 ; 24 bit A/D raw data from S8 HUD sensor 2 | |
| 1174 s8_rawdata_sensor3 res 3 ; 24 bit A/D raw data from S8 HUD sensor 3 | |
| 1175 ENDIF | |
| 582 | 1176 |
| 623 | 1177 ;---- Switch Processing (8 byte, called by ISR and sleep mode) |
| 1178 analog_sw1_raw res 2 ; idle values (average) | |
| 1179 analog_sw2_raw res 2 ; idle values (average) | |
| 1180 analog_counter res 1 ; for averaging | |
| 1181 analog_sw1 res 1 ; analog value for switch 1 | |
| 1182 analog_sw2 res 1 ; analog value for switch 2 | |
| 1183 button_polarity res 1 ; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only) | |
| 582 | 1184 |
| 631 | 1185 |
| 623 | 1186 ;--- resettable min and max Depth Option |
| 1187 IFDEF _min_depth_option | |
| 1188 pressure_rel_min_trip res 2 ; resettable minimum relative pressure | |
| 1189 pressure_rel_max_trip res 2 ; resettable maximum relative pressure | |
| 1190 ENDIF | |
| 640 | 1191 |
| 1192 debounce_counter res 1 ; multiples of 16ms | |
| 582 | 1193 |
| 640 | 1194 ; 144 byte used, 16 byte free |
| 560 | 1195 |
| 634 | 1196 |
| 1197 ;----------------------------------------------------------------------------- | |
| 1198 ; Common DATA | |
| 1199 ;----------------------------------------------------------------------------- | |
| 1200 | |
| 623 | 1201 common equ 0x100 ; Alias for "banksel common" |
| 1202 common udata_ovr common ; Bank 1 general variables | |
| 582 | 1203 |
| 623 | 1204 ;---- Multi-Purpose Register for Data Storage and Interface with Conversion and Display Functions (6 byte) |
| 1205 mpr res 6 ; will be used as base address of 1, 2, 3, 4 and 6 byte buffers | |
| 1206 #DEFINE lo mpr+0 ; nickname for "low" | |
| 1207 #DEFINE hi mpr+1 ; nickname for "high" | |
| 1208 #DEFINE up mpr+2 ; nickname for "upper" | |
| 1209 #DEFINE ex mpr+3 ; nickname for "extra" | |
| 1210 #DEFINE ul mpr+4 ; nickname for "ultra" | |
| 1211 #DEFINE hy mpr+5 ; nickname for "hyper" | |
| 1212 | |
| 582 | 1213 |
| 623 | 1214 ;---- Flags - Menu System (2 byte) |
| 1215 MS_flags_control res 1 ; menu system - control | |
| 1216 MS_flags_imprint res 1 ; menu system - data imprinting | |
| 582 | 1217 |
| 634 | 1218 ;---- Flags - Dive Mode (21 byte) |
| 623 | 1219 DM_flags_state res 1 ; dive mode - dive states |
| 1220 DM_flags_sensor res 1 ; dive mode - O2 sensors | |
| 631 | 1221 DM_flags_request res 1 ; dive mode - user requests / general |
| 623 | 1222 DM_flags_event res 1 ; dive mode - data recording events |
| 1223 DM_flags_layout1 res 1 ; dive mode - display control / layout (1) | |
| 1224 DM_flags_layout2 res 1 ; dive mode - display control / layout (2) | |
| 631 | 1225 DM_flags_layout3 res 1 ; dive mode - display control / layout (3) |
| 623 | 1226 DM_flags_message res 1 ; dive mode - display control / messages |
| 1227 DM_flags_gas_dil res 1 ; dive mode - display control / gas, diluent | |
| 634 | 1228 DM_flags_advc_det res 1 ; dive mode - advices detected |
| 1229 DM_flags_advc_ack res 1 ; dive mode - advices acknowledged | |
| 1230 DM_flags_att1_det res 1 ; dive mode - attentions detected (1) | |
| 1231 DM_flags_att2_det res 1 ; dive mode - attentions detected (2) | |
| 1232 DM_flags_att3_det res 1 ; dive mode - attentions detected (3) | |
| 1233 DM_flags_att1_ack res 1 ; dive mode - attentions acknowledged (1) | |
| 1234 DM_flags_att2_ack res 1 ; dive mode - attentions acknowledged (2) | |
| 1235 DM_flags_att3_ack res 1 ; dive mode - attentions acknowledged (3) | |
| 1236 DM_flags_war1_det res 1 ; dive mode - warnings detected (1) | |
| 1237 DM_flags_war2_det res 1 ; dive mode - warnings detected (2) | |
| 1238 DM_flags_war1_ack res 1 ; dive mode - warnings acknowledged (1) | |
| 1239 DM_flags_war2_ack res 1 ; dive mode - warnings acknowledged (2) | |
| 1240 DM_flags_shown1 res 1 ; dive mode - custom views shown (1) | |
| 1241 DM_flags_shown2 res 1 ; dive mode - custom views shown (2) | |
| 1242 DM_flags_shown3 res 1 ; dive mode - custom views shown (3) | |
| 623 | 1243 |
| 1244 ;---- Miscellaneous Flags (1 byte) | |
| 1245 misc_flags res 1 | |
| 1246 | |
| 634 | 1247 ;---- Interface to Graphic Functions (11 byte) |
| 582 | 1248 win_leftx2 res 1 |
| 1249 win_top res 1 | |
| 1250 win_width res 2 | |
| 1251 win_height res 1 | |
| 623 | 1252 win_bargraph res 1 ; width of the bargraph bar |
| 1253 win_color1 res 1 ; 2 byte color | |
| 1254 win_color2 res 1 ; 2 byte color | |
| 1255 win_color3 res 1 ; 3 byte color used for display 2 | |
| 1256 win_color4 res 1 ; 3 byte color used for display 2 | |
| 1257 win_color5 res 1 ; 3 byte color used for display 2 | |
| 560 | 1258 |
| 623 | 1259 ;---- Interface to Math Functions (16 byte) |
| 582 | 1260 divA res 2 |
| 1261 xA res 2 | |
| 1262 xB res 2 | |
| 623 | 1263 xC res 4 |
| 582 | 1264 sub_a res 2 |
| 1265 sub_b res 2 | |
| 623 | 1266 sub_c res 2 |
| 582 | 1267 |
| 631 | 1268 ;---- Menu System and Views (5 byte) |
| 623 | 1269 menu_pos_cur res 1 ; current position in main menu |
| 1270 menu_pos_max res 1 ; highest position in main menu | |
| 1271 active_premenu res 1 ; currently shown pre-menu (0: none) | |
| 631 | 1272 active_customview res 1 ; currently shown custom view |
| 1273 backup_customview res 1 ; previously shown custom view | |
| 623 | 1274 |
| 1275 ;---- Miscellaneous (6 byte) | |
| 1276 batt_voltage res 2 ; battery voltage in mV (no ISR involved) | |
| 1277 batt_percent res 1 ; battery in percent (1-100%) | |
| 604 | 1278 message_counter res 1 ; counts amount of messages |
| 623 | 1279 message_page res 1 ; current message page number |
| 604 | 1280 pairing_slot res 1 ; slot number, used in transmitter pairing |
| 1281 | |
| 634 | 1282 |
| 631 | 1283 ;---- Dive Mode / all modes (26 byte) |
| 623 | 1284 divesecs_avg_trip res 2 ; time accumulator for the resettable average depth & stopwatch |
| 1285 divesecs_avg_total res 2 ; time accumulator for the total dive average depth | |
| 1286 pressure_rel_avg_trip res 2 ; calculated resettable average depth | |
| 1287 pressure_rel_avg_total res 2 ; calculated total dive average depth | |
| 1288 pressure_rel_cur_cached res 2 ; cached current relative pressure | |
| 1289 pressure_rel_max_cached res 2 ; cached maximum relative pressure | |
| 1290 pressure_abs_cached res 2 ; cached current absolute pressure | |
| 1291 pressure_abs_10 res 2 ; cached current absolute pressure divided by 10 | |
| 1292 depth_meter res 1 ; current depth in meters | |
| 1293 safety_stop_countdown res 1 ; counter for safety stop | |
| 1294 dive_timeout_timer res 2 ; timeout timer for leaving dive mode after surfacing | |
| 582 | 1295 gaslist_gas res 1 ; used for transfer between gaslist.asm and menu_tree.asm |
| 604 | 1296 best_gas_number res 1 ; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed |
| 623 | 1297 active_gas res 1 ; the currently used OC/bailout gas (1-5) |
| 640 | 1298 dive_ccr_mode res 1 ; working copy of opt_ccr_mode while the dive |
| 623 | 1299 |
| 1300 IFDEF _ccr_pscr | |
| 604 | 1301 best_dil_number res 1 ; number of the "best dil": 0= none found, 1-5= dils 1-5, 255= not computed |
| 1302 active_dil res 1 ; the currently used diluent (1-5) | |
| 623 | 1303 ENDIF |
| 1304 | |
| 631 | 1305 IFDEF _cave_mode |
| 1306 DM_flags_cavereq res 1 ; dive mode - user requests / cave mode | |
| 1307 backtrack_deltatime res 1 ; time elapsed since last depth recording in seconds | |
| 1308 backtrack_waypoint_num res 1 ; current waypoint number | |
| 1309 backtrack_waypoint_turn res 1 ; waypoint number of the turn point | |
| 1310 ENDIF | |
| 1311 | |
| 623 | 1312 ;---- Dive Mode / apnoe mode (2 byte) |
| 1313 apnoe_max_pressure res 2 ; max depth over all dives in the series | |
| 560 | 1314 |
| 623 | 1315 ;---- Profile Recording (6 byte) |
| 634 | 1316 alarm_type res 1 ; alarm states recording |
| 1317 event_byte1 res 1 ; events recording | |
| 1318 event_byte2 res 1 ; events recording | |
| 623 | 1319 CNS_start res 2 ; CNS value at beginning of dive |
| 560 | 1320 |
| 631 | 1321 ;---- External Flash (14 byte) |
| 582 | 1322 ext_flash_address res 3 ; 24 bit address |
| 631 | 1323 ext_flash_length_counter res 3 ; 24 bit length counter |
| 582 | 1324 ext_flash_log_pointer res 3 ; 24 bit address for logbook profile storing |
| 1325 ext_flash_end_pointer res 3 ; 24 bit address for logbook profile storing | |
| 631 | 1326 ext_flash_rw res 1 ; transfer register for data read / write |
| 634 | 1327 ext_flash_address_limit res 1 ; wrap-around threshold while address incrementing |
| 560 | 1328 |
| 1329 | |
| 634 | 1330 ;------------------------------------------------------------------------------- |
| 1331 ; private Variables - do not access from outside of the respective source files! | |
| 1332 ;------------------------------------------------------------------------------- | |
| 560 | 1333 |
| 634 | 1334 ;---- aa_wordprocessor.asm, strings.asm & Co. |
| 623 | 1335 AA_flags res 1 ; various flags for aa_wordprocessor and strings |
| 582 | 1336 aa_bitlen res 1 ; count of pixels when decoding bitmaps |
| 623 | 1337 aa_start res 2 ; PROM pointer to start of encoded bitmap |
| 582 | 1338 aa_end res 2 ; and end of it |
| 1339 aa_temp res 2 ; current color, divided by 2 or 4 | |
| 634 | 1340 font_color res 1 ; selected font color |
| 1341 font_size res 1 ; selected font size | |
| 1342 pallet_color_mask res 1 ; pallet color - mask | Attention: | |
| 1343 pallet_color_disabled res 1 ; pallet color - disabled | do not change | |
| 1344 pallet_color_memo res 1 ; pallet color - memo | the relative | |
| 1345 pallet_color_advice res 1 ; pallet color - advice | position of | |
| 1346 pallet_color_attention res 1 ; pallet color - attention | these vars! | |
| 1347 pallet_color_warning res 1 ; pallet color - warning | | |
| 1348 | |
| 582 | 1349 |
| 1350 ;--- adc_lightsensor.asm | |
| 623 | 1351 get_bat_volt_counter res 1 ; counter for reading the charger chip |
| 582 | 1352 |
| 1353 ;---- convert.asm | |
| 623 | 1354 CVT_flags1 res 1 |
| 1355 CVT_flags2 res 1 | |
| 634 | 1356 bcd_lo res 1 |
| 1357 bcd_hi res 1 | |
| 1358 bcd_up res 1 | |
| 1359 bin_lo res 1 | |
| 1360 bin_hi res 1 | |
| 582 | 1361 |
| 1362 ;---- color_processor.asm | |
| 623 | 1363 overall_pixels res 3 ; used by color_processor.asm |
| 1364 pixel_count res 2 ; used by color_processor.asm | |
| 1365 encoding_format res 1 ; image encoding format | |
| 1366 | |
| 1367 ;---- compass_ops.asm | |
| 1368 compass_flags res 1 ; flags are defined in compass_ops.asm | |
| 582 | 1369 |
| 1370 ;---- comm.asm | |
| 623 | 1371 comm_timeout_timer res 1 ; timeout for communication |
| 582 | 1372 |
| 1373 ;---- eeprom_rs232.asm | |
| 631 | 1374 eeprom_loop res 1 ; loop counter (actually used in flash and serial, too) |
| 634 | 1375 rx_timeout_tmr5h_load res 1 ; TMR5H load value for RS232 RX timeout |
| 582 | 1376 |
| 1377 ;---- i2c.asm | |
| 1378 i2c_temp1 res 1 ; temporary data | |
| 1379 i2c_temp2 res 1 ; temporary data | |
| 1380 | |
| 623 | 1381 ;---- math.asm |
| 1382 math_loop res 1 ; loop counter | |
| 1383 | |
| 582 | 1384 ;---- menu_processor.asm |
| 623 | 1385 menustack_pointer res 1 ; pointer to menu stack |
| 634 | 1386 menu_item_start res 1 ; index of the first menu item (scrolling) |
| 1387 menu_item_curr res 1 ; index of the current menu item (loop counter) | |
| 1388 menu_item_count res 1 ; total number of menu items | |
| 582 | 1389 selected_item res 1 ; index of the current item |
| 634 | 1390 menu_title_addr res 2 ; address of the multi-lingual menu titel |
| 1391 menu_item_data_start res 3 ; base address of the menu item data blocks | |
| 1392 menu_vertical_start res 1 ; vertical start position of 1st menu item | |
| 1393 item_type res 1 ; type of the menu item | |
| 1394 item_title_addr res 2 ; address of item title function or title text | |
| 1395 item_funct_addr res 2 ; address of item call function or option definition data | |
| 1396 | |
| 582 | 1397 |
| 1398 ;---- options.asm | |
| 634 | 1399 #DEFINE opt_definition_bytes .12 ; | Attention: do not change the relative position of these vars! |
| 631 | 1400 opt_type res 1 ; | option type |
| 1401 opt_serial res 1 ; | index used for option read/write via RS232 | |
| 634 | 1402 opt_inc res 1 ; | increment value, also used for enum low and low (pointer to default string) |
| 1403 opt_min res 1 ; | minimum value, also used for enum high and high(pointer to default string) | |
| 1404 opt_max res 1 ; | maximum value, also used for length( default string) | |
| 631 | 1405 opt_default res 1 ; | default value |
| 1406 opt_unit res 2 ; | pointer to multi-lingual unit text | |
| 1407 opt_memory res 2 ; | pointer to memory position | |
| 1408 opt_eeprom_index res 1 ; | pointer to EEPROM position (index) | |
| 1409 opt_eeprom_bank res 1 ; | pointer to EEPROM position (bank) | |
| 1410 opt_end_token res 1 ; | =0xFF: end of table reached (does not count into opt_definiton_bytes) | |
| 1411 | |
| 582 | 1412 |
| 1413 ;---- tft.asm | |
| 623 | 1414 tft_save_top res 1 |
| 1415 tft_save_height res 1 | |
| 1416 tft_save_left res 1 | |
| 1417 tft_save_width res 1 | |
| 582 | 1418 tft_temp1 res 1 |
| 1419 tft_temp2 res 1 | |
| 1420 tft_temp3 res 1 | |
| 1421 tft_temp4 res 1 | |
| 1422 | |
| 623 | 1423 ;---- dump screen Function |
| 604 | 1424 IFDEF _screendump |
| 623 | 1425 ds_line res 1 ; current line (0..239) |
| 1426 ds_column res 1 ; current columnx2 (0..159) | |
| 1427 ds_pixel res 2 ; current pixel color | |
| 1428 ds_count res 1 ; repetition count | |
| 604 | 1429 ENDIF |
| 1430 | |
| 582 | 1431 ;---- wait.asm |
| 1432 wait_counter res 1 | |
| 1433 | |
| 634 | 1434 ;---- tft_outputs.asm |
| 1435 pressure_update_lag_counter res 1 ; lag time counter for fast surface pressure display updating | |
| 623 | 1436 |
| 634 | 1437 |
| 640 | 1438 ; 201 byte used, 7 byte free (208 byte total) |
| 582 | 1439 |
| 1440 | |
| 634 | 1441 ;----------------------------------------------------------------------------- |
| 1442 ; LOCAL DATA | |
| 1443 ;----------------------------------------------------------------------------- | |
| 1444 | |
| 582 | 1445 ; Space for various overlayed local data from top-level applications, |
| 1446 ; i.e. applications that never run in parallel to each other | |
| 634 | 1447 |
| 582 | 1448 ; --------------------- local Data Users -------------------------------------- |
| 623 | 1449 ; |
| 1450 ; -------------- Applications using ---------------------- | |
| 582 | 1451 ; Mode local1 local2 local3 |
| 634 | 1452 ; -------------------------------------------------------------------------- |
| 582 | 1453 ; sleepmode sleepmode.asm (unused) (unused) |
| 1454 ; surfmode surfmode.asm* (unused) (unused) | |
| 628 | 1455 ; simulator divemode.asm divemode.asm simulator.asm |
| 604 | 1456 ; divemode divemode.asm divemode.asm ghostwriter.asm |
| 623 | 1457 ; logbook logbook.asm logbook.asm logbook.asm |
| 582 | 1458 ; |
| 1459 ; * assigned to this slot, but currently no local memory used | |
| 1460 | |
| 1461 local1 equ 0x1D0 ; Alias for CBLOCK directive | |
| 1462 local1 udata_ovr 0x1D0 ; Bank1 shared local space | |
| 1463 res 0x10 ; 16 Byte (0x1D0 ... 0x1DF) | |
| 1464 | |
| 1465 local2 equ 0x1E0 ; Alias for CBLOCK directive | |
| 1466 local2 udata_ovr 0x1E0 ; Bank1 shared local space | |
| 1467 res 0x10 ; 16 Byte (0x1E0 ... 0x1EF) | |
| 1468 | |
| 1469 local3 equ 0x1F0 ; Alias for CBLOCK directive | |
| 1470 local3 udata_ovr 0x1F0 ; Bank1 shared local space | |
| 1471 res 0x10 ; 16 Byte (0x1F0 ... 0x1FF) | |
| 1472 | |
| 1473 | |
| 634 | 1474 ;----------------------------------------------------------------------------- |
| 1475 ; Common2 DATA | |
| 1476 ;----------------------------------------------------------------------------- | |
| 1477 | |
| 623 | 1478 common2 equ 0xA00 ; Alias for "banksel common2" |
| 1479 common2 udata_ovr common2 ; Bank 10 general variables | |
| 582 | 1480 |
| 623 | 1481 ;---- Data for Logging (6 byte), sampled in divemode.asm and used in ghostwriter.asm |
| 1482 start_year res 1 ; year | ATTENTION: | |
| 1483 start_month res 1 ; month | do not change the | |
| 1484 start_day res 1 ; day | position of these | |
| 1485 start_hour res 1 ; hour | variables relative | |
| 1486 start_mins res 1 ; minute | to each other! | |
| 1487 start_secs res 1 ; second, not used, for code commonality | | |
| 582 | 1488 |
| 623 | 1489 supersat_start res 1 ; leading tissue supersaturation at beginning of the dive |
| 1490 | |
| 1491 ;---- O2 Sensors (9 byte, updated by ISR when sensors are connected via datalink) | |
| 1492 IFDEF _external_sensor | |
| 1493 sensor1_mv res 2 ; sensor 1 voltage in 0.1 mV steps | |
| 1494 sensor2_mv res 2 ; sensor 2 voltage in 0.1 mV steps | |
| 1495 sensor3_mv res 2 ; sensor 3 voltage in 0.1 mV steps | |
| 1496 sensor1_ppO2 res 1 ; sensor 1 ppO2 in 0.01 bar steps | |
| 1497 sensor2_ppO2 res 1 ; sensor 2 ppO2 in 0.01 bar steps | |
| 1498 sensor3_ppO2 res 1 ; sensor 3 ppO2 in 0.01 bar steps | |
| 1499 ENDIF | |
| 582 | 1500 |
| 623 | 1501 ;---- last Dive Statistics (7 byte) |
| 1502 lastdive_duration res 3 ; byte 0= minutes, low byte, 1= minutes, high byte, 2= seconds | |
| 1503 lastdive_maxdepth res 2 ; in mbar | |
| 1504 lastdive_avgdepth res 2 ; in mbar | |
| 582 | 1505 |
| 623 | 1506 ;---- Backup of last shown Custom View (2 byte) |
| 582 | 1507 customview_surfmode res 1 ; storage to remember last selected custom view in surface mode |
| 1508 customview_divemode res 1 ; storage to remember last selected custom view in dive mode | |
| 1509 | |
| 623 | 1510 ;---- Miscellaneous (0 byte) |
| 1511 ;old_velocity res 4 ; stores the last 4 speeds (8 seconds) in m/min | |
| 1512 | |
| 1513 ;---- Menu Processor (8 byte) | |
| 1514 menustack res 8 ; menu stack | |
| 582 | 1515 |
| 628 | 1516 ;---- Graphical Compass (15 byte) |
| 623 | 1517 xRD res 2 ; virtual compass ruler offset |
| 1518 xRDr res 2 ; virtual compass ruler offset - right end | |
| 1519 xRD180 res 2 ; virtual compass ruler offset for the -180 marker | |
| 1520 xLO res 1 ; lo backup to prevent trashing | |
| 1521 xHI res 1 ; hi backup to prevent trashing | |
| 1522 xCM res 1 ; compass bearing relative position | |
| 1523 compass_heading_new res 2 ; corrected heading (in 1°) : -180 .. 180 | |
| 1524 compass_heading_shown res 2 ; displayed heading | |
| 1525 compass_bearing res 2 ; displayed bearing | |
| 582 | 1526 |
| 623 | 1527 ;---- Compass Arithmetics (30 byte) |
| 1528 compass_DX res 2 ; raw data | |
| 1529 compass_DY res 2 ; raw data | |
| 1530 compass_DZ res 2 ; raw data | |
| 1531 accel_DX res 2 ; raw data | |
| 1532 accel_DY res 2 ; raw data | |
| 1533 accel_DZ res 2 ; raw data | |
| 1534 compass_DX_f res 2 ; filtered Data | |
| 1535 compass_DY_f res 2 ; filtered Data | |
| 1536 compass_DZ_f res 2 ; filtered Data | |
| 1537 accel_DX_f res 2 ; filtered Data | |
| 1538 accel_DY_f res 2 ; filtered Data | |
| 1539 accel_DZ_f res 2 ; filtered Data | |
| 631 | 1540 compass_CX_f res 2 ; calibration data (stored via options system) |
| 1541 compass_CY_f res 2 ; calibration data (stored via options system) | |
| 1542 compass_CZ_f res 2 ; calibration data (stored via options system) | |
| 582 | 1543 |
| 623 | 1544 ;---- temporary Data for Q15 Arithmetics (7 byte, compass_ops.asm, called from C) |
| 1545 compass_a res 2 ; | |
| 1546 compass_b res 2 ; | |
| 1547 compass_r res 3 ; | |
| 1548 | |
| 1549 ;---- Data Exchange with TR Co-Processor (50 byte) | |
| 604 | 1550 IFDEF _rx_functions |
| 1551 rx_buffer res .48 ; Buffer for RX data (slots 0-7) | |
| 623 | 1552 rx_firmware_cur_major res 1 ; TR module current firmware, major |
| 1553 rx_firmware_cur_minor res 1 ; TR module current firmware, minor | |
| 1554 ENDIF | |
| 604 | 1555 |
| 628 | 1556 ;---- SAC Calculation on Pressure Readings 1 & 2 (22 byte) |
| 623 | 1557 IFDEF _rx_functions |
| 604 | 1558 pres_accu_1st res 4 ; accumulator for pressure drop in 1/160 bar | ATTENTION: do not |
| 1559 pres_accu_2nd res 4 ; accumulator for pressure drop in 1/160 bar | change the | |
| 628 | 1560 time_accu_1st res 2 ; accumulator for reading ages in seconds | position |
| 604 | 1561 gas__last_1st res 1 ; last gas assignment | of these |
| 628 | 1562 time_accu_2nd res 2 ; accumulator for reading ages in seconds | variables |
| 604 | 1563 gas__last_2nd res 1 ; last gas assignment | relative |
| 1564 pres_last_1st res 2 ; last pressure reading pressure in 1/160 bar | to each | |
| 1565 pres_last_2nd res 2 ; last pressure reading pressure in 1/160 bar | other! | |
| 1566 time_last_1st res 2 ; last pressure reading time in seconds | | |
| 1567 time_last_2nd res 2 ; last pressure reading time in seconds | | |
| 1568 ENDIF | |
| 1569 | |
| 631 | 1570 ; 156 byte used, 100 byte free |
| 1571 | |
| 1572 | |
| 634 | 1573 ;----------------------------------------------------------------------------- |
| 1574 ; Bank 2 General Purpose Buffer 1 | |
| 1575 ;----------------------------------------------------------------------------- | |
| 1576 | |
| 631 | 1577 ; NOTE: needs to be aligned with a bank (low(buffer)=0) |
| 1578 | |
| 1579 buffer udata_ovr 0x200 | |
| 1580 buffer res .256 ; buffer 1 - string buffer, etc. | |
| 582 | 1581 |
| 1582 | |
| 634 | 1583 ;----------------------------------------------------------------------------- |
| 1584 ; Bank 11 General Purpose Buffer 2 | |
| 1585 ;----------------------------------------------------------------------------- | |
| 1586 | |
| 1587 ; NOTE: needs to be aligned with a bank (low(buffer)=0) | |
| 631 | 1588 ; |
| 1589 ; Remark: this memory block is already allocated in shared_definitions.h for | |
| 1590 ; use while in dive mode, so we need to make a hard reference here | |
| 634 | 1591 |
| 631 | 1592 ;buffer2 udata_ovr 0xB00 |
| 1593 ;buffer2 res .256 ; buffer 2 - backtracking, flash mirror, etc. | |
| 582 | 1594 |
| 631 | 1595 #DEFINE buffer2 0xB00 |
| 582 | 1596 |
| 1597 | |
| 634 | 1598 ;----------------------------------------------------------------------------- |
| 1599 ; Bank 14 Options Table | |
| 1600 ;----------------------------------------------------------------------------- | |
| 1601 | |
| 623 | 1602 opt_table equ 0xE00 ; Alias for "banksel opt_table" |
| 1603 opt_table udata_ovr opt_table ; Bank 14 options table | |
| 582 | 1604 |
| 623 | 1605 ;---- Gas and Diluent Settings |
| 604 | 1606 opt_gas_O2_ratio res 5 ; O2 ratios of OC/bailout gases | ATTENTION: |
| 1607 opt_dil_O2_ratio res 5 ; O2 ratios of diluents | keep relative | |
| 1608 opt_gas_He_ratio res 5 ; He ratios of OC/bailout gases | positioning of | |
| 1609 opt_dil_He_ratio res 5 ; He ratios of diluents | all arrays in | |
| 1610 opt_gas_type res 5 ; OC/bailout gas type: O=Disabled, 1=First, 2=Travel, 3=Deco | this block! | |
| 1611 opt_dil_type res 5 ; dil type: 0=Disabled, 1=First, 2=Normal | | |
| 1612 opt_gas_change res 5 ; change depths for OC/Bailout gases | | |
| 1613 opt_dil_change res 5 ; change depths for diluents | | |
| 1614 | |
| 634 | 1615 ;---- Gas 6 Settings |
| 1616 opt_gas6_O2_ratio res 1 ; gas 6 O2 ratio | ATTENTION: keep relative positioning | |
| 1617 opt_gas6_He_ratio res 1 ; gas 6 He ratio | of these two variables! | |
| 1618 | |
| 1619 ;---- Setpoints Settings | |
| 623 | 1620 opt_setpoint_cbar res 5 ; setpoints in cbar | ATTENTION: keep relative positioning |
| 1621 opt_setpoint_change res 5 ; change depth for the setpoints in meter | of these two arrays! | |
| 582 | 1622 |
| 623 | 1623 ;---- Dive Mode Settings |
| 1624 opt_dive_mode res 1 ; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea, =4: pSCR | |
| 1625 opt_ccr_mode res 1 ; CCR/pSCR sub mode: =0: fixed/calculated SP, =1: Sensor, =2: Auto SP | |
| 1626 | |
| 1627 ;---- custom Text | |
| 1628 #DEFINE opt_name_length .60 ; custom text string 5 rows with 12 chars | |
| 1629 opt_name res opt_name_length | |
| 1630 | |
| 1631 ;---- various other Settings | |
| 631 | 1632 opt_fw_version_major res 1 ; firmware version, major | use read-only! |
| 1633 opt_fw_version_minor res 1 ; firmware version, minor | | |
| 1634 opt_fw_version_beta res 1 ; firmware version, beta | | |
| 623 | 1635 opt_surface_interval res 1 ; surface interval, used by deco calculator |
| 582 | 1636 opt_brightness res 1 ; =0: Eco, =1:Medium, =2:Full |
| 1637 opt_salinity res 1 ; 0-5% | |
| 604 | 1638 opt_language res 1 ; current language: 0=EN, 1=DE, 2=FR, 3=SP |
| 582 | 1639 opt_units res 1 ; 0:m/°C, 1:ft/°F |
| 1640 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD | |
| 634 | 1641 opt_dive_color_scheme res 1 ; dive mode color scheme selection |
| 582 | 1642 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m |
| 604 | 1643 opt_aGF_high res 1 ; alternative GF HIGH |
| 1644 opt_aGF_low res 1 ; alternative GF LOW | |
| 582 | 1645 opt_GF_high res 1 ; GF HIGH |
| 1646 opt_GF_low res 1 ; GF LOW | |
| 1647 opt_enable_aGF res 1 ; =1: aGF can be selected underwater | |
| 1648 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) | |
| 1649 opt_sampling_rate res 1 ; =1: 10s, =0: 2s | |
| 1650 opt_pressure_adjust res 1 ; SIGNED char (two's complement), -20/+20mbar max. | |
| 631 | 1651 opt_safetystop res 1 ; =1: a safety stop is shown |
| 582 | 1652 opt_calibration_O2_ratio res 1 ; %O2 of calibration gas |
| 634 | 1653 opt_x_s1 res 2 ; calibration factor (not stored in EEPROM) | keep relative |
| 1654 opt_x_s2 res 2 ; calibration factor (not stored in EEPROM) | position! | |
| 1655 opt_x_s3 res 2 ; calibration factor (not stored in EEPROM) | | |
| 582 | 1656 opt_sensor_fallback res 1 ; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE |
| 604 | 1657 opt_flip_screen res 1 ; =1: flip the screen |
| 623 | 1658 opt_cR_button_left res 1 ; left button sensitivity (cR hardware) |
| 604 | 1659 opt_cR_button_right res 1 ; right button sensitivity (cR hardware) |
| 631 | 1660 opt_depth_warn res 1 ; =1:do a red blinking warning, =0:default behavior |
| 1661 opt_vsitext res 1 ; =1:use the depth dependent ascend rate limits | |
| 582 | 1662 opt_vsigraph res 1 ; =1:draw the graphical VSI bar |
| 1663 opt_showppo2 res 1 ; =1:always show the ppO2 value in the warning position | |
| 1664 opt_temperature_adjust res 1 ; SIGNED char (two's complement), -2.0/+2.0 °C max. | |
| 1665 opt_safety_stop_length res 1 ; [s] | |
| 1666 opt_safety_stop_start res 1 ; [cbar] | |
| 1667 opt_safety_stop_end res 1 ; [cbar] | |
| 1668 opt_safety_stop_reset res 1 ; [cbar] | |
| 604 | 1669 opt_diveTimeout res 1 ; timeout for dive mode [min] |
| 582 | 1670 opt_sim_setpoint_number res 1 ; setpoint to use for deco calculation |
| 631 | 1671 opt_calc_gasvolume res 1 ; calculate OC gas volume needs for ascent |
| 582 | 1672 opt_sim_use_aGF res 1 ; =0: use GF, =1: use aGF for deco calculation |
| 1673 opt_enable_IBCD res 1 ; enable IBCD warning | |
| 1674 opt_sat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1675 opt_desat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1676 opt_sat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 1677 opt_desat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 604 | 1678 opt_2ndDepthDisp res 1 ; =1: show average depth instead of max depth |
| 623 | 1679 opt_max_depth res 1 ; depth at which a warning will be given |
| 631 | 1680 opt_store_apnoe res 1 ; =1: store dives in apnoe mode into logbook |
| 623 | 1681 opt_tissue_graphics res 1 ; =0: show N2 and He pressures, =1: show pressures and saturations |
| 1682 opt_logoffset_step res 1 ; step size when adjusting log offset | |
| 1683 opt_layout res 1 ; initial layout of dive mode screen | |
| 631 | 1684 opt_ext_stops res 1 ; =1: place gas switches also below 1st stop depth |
| 1685 opt_s8_mode res 1 ; S8 mode - analog / digital | |
| 1686 opt_gas_contingency_sim res 1 ; =1: deco calculator: switch to alternative gas if best gas is used up | |
| 1687 opt_gas_contingency_dive res 1 ; =1: real dive mode: switch to alternative gas if best gas is used up | |
| 1688 opt_cave_mode res 1 ; =1: cave mode switched on | |
| 634 | 1689 opt_gas_density_check res 1 ; =1: gas density is checked (effective in CCR / pSCR modes only) |
| 1690 opt_comm_timeout res 1 ; comm RX timeout in multiples of 10 ms | |
| 1691 opt_fallback res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 1692 opt_conservatism res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 604 | 1693 |
| 623 | 1694 ;---- RX Function Settings |
| 604 | 1695 opt_transmitter_id_1 res 2 ; 16 bit transmitter ID for Gas 1 |
| 1696 opt_transmitter_id_2 res 2 ; 16 bit transmitter ID for Gas 2 | |
| 1697 opt_transmitter_id_3 res 2 ; 16 bit transmitter ID for Gas 3 | |
| 1698 opt_transmitter_id_4 res 2 ; 16 bit transmitter ID for Gas 4 | |
| 1699 opt_transmitter_id_5 res 2 ; 16 bit transmitter ID for Gas 5 | |
| 1700 opt_transmitter_id_6 res 2 ; 16 bit transmitter ID for Dil 1 | |
| 1701 opt_transmitter_id_7 res 2 ; 16 bit transmitter ID for Dil 2 | |
| 1702 opt_transmitter_id_8 res 2 ; 16 bit transmitter ID for Dil 3 | |
| 1703 opt_transmitter_id_9 res 2 ; 16 bit transmitter ID for Dil 4 | |
| 1704 opt_transmitter_id_10 res 2 ; 16 bit transmitter ID for Dil 5 | |
| 1705 opt_TR_mode res 1 ; TR functions - mode | |
| 1706 opt_TR_1st_pres res 1 ; TR functions - 1st pressure assignment | |
| 1707 opt_TR_2nd_pres res 1 ; TR functions - 2nd pressure assignment | |
| 1708 opt_TR_Bail_pres res 1 ; TR functions - bailout pressure assignment | |
| 1709 | |
| 634 | 1710 ; ==> 193 bytes used - 51 bytes free (244 usable bytes only in bank 14 as the upper 12 |
| 631 | 1711 ; bytes are reserved for special function registers) |
| 582 | 1712 |
| 1713 ;----------------------------------------------------------------------------- |