0
+ − 1 #ifdef xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ − 2 ;
+ − 3 ; shared_definitions.h
+ − 4 ;
+ − 5 ; Declare variables used both in C and ASM code
+ − 6 ;
+ − 7 ; This program is free software: you can redistribute it and/or modify
+ − 8 ; it under the terms of the GNU General Public License as published by
+ − 9 ; the Free Software Foundation, either version 3 of the License, or
+ − 10 ; (at your option) any later version.
+ − 11 ;
+ − 12 ; This program is distributed in the hope that it will be useful,
+ − 13 ; but WITHOUT ANY WARRANTY; without even the implied warranty of
+ − 14 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ − 15 ; GNU General Public License for more details.
+ − 16 ;
+ − 17 ; You should have received a copy of the GNU General Public License
+ − 18 ; along with this program. If not, see <http://www.gnu.org/licenses/>.
+ − 19 ;
+ − 20 ; Copyright (c) 2010, JD Gascuel.
+ − 21 ;=============================================================================
+ − 22 ; RATIONAL
+ − 23 ;
+ − 24 ; We must enforce good data passing between the C and the ASM parts of code.
+ − 25 ; The previous design used two independant definitions of each variable,
+ − 26 ; one in C, one in ASM. If they did not match, no error was generated, and
+ − 27 ; anything can happend at runtime...
+ − 28 ;
+ − 29 ; The new design use LINKING to ensure the variables defined in C are at the
+ − 30 ; same address when used in ASM code. And it uses a unique declaration file
+ − 31 ; (with suitable macros) to make sure they have the same size in both language.
+ − 32 ;
+ − 33 ; HISTORY
+ − 34 ; 2011-01-20: [jDG] Creation.
+ − 35 ;
+ − 36 ; NOTE
+ − 37 ;
+ − 38 ; This file have to obey both ASM and C syntax. The only common directives
+ − 39 ; are #if/#ifdef/#endif and the #define, so they are eavily used to do the
+ − 40 ; trick.
+ − 41 ;
+ − 42 ; BUGS
+ − 43 ;=============================================================================
+ − 44 ; HISTORY
+ − 45 #endif
+ − 46
+ − 47 #ifdef __18CXX
+ − 48 //------------------------------------------------------------------------
+ − 49 // C-style declarations:
+ − 50 # ifndef TEST_MAIN
+ − 51 # define VAR_UCHAR(n) extern unsigned char n
+ − 52 # define TAB_UCHAR(n,size) extern unsigned char n[size]
+ − 53 # define VAR_UINT(n) extern unsigned short n
+ − 54 # define TAB_UINT(n,size) extern unsigned short n[size]
+ − 55 # else
+ − 56 # define VAR_UCHAR(n) unsigned char n
+ − 57 # define TAB_UCHAR(n,size) unsigned char n[size]
+ − 58 # define VAR_UINT(n) unsigned short n
+ − 59 # define TAB_UINT(n,size) unsigned short n[size]
+ − 60 # endif
+ − 61 #else
+ − 62 ;-------------------------------------------------------------------------
+ − 63 ; ASM-style declarations:
+ − 64 #define VAR_UCHAR(n) n res 1
+ − 65 #define TAB_UCHAR(n,size) n res size
+ − 66 #define VAR_UINT(n) n res 2
+ − 67 #define TAB_UINT(n,size) n res 2*size
+ − 68 #endif
+ − 69
+ − 70 #ifdef __18CXX
+ − 71 //---- BANK 3 DATA -------------------------------------------------------
+ − 72 // Gather all data C-code --> ASM-code
+ − 73 # pragma udata overlay bank3=0x300
+ − 74 #else
+ − 75 bank3 udata_ovr 0x300
+ − 76 #endif
+ − 77
+ − 78 #ifdef xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ − 79 Define model dimensions.
+ − 80 NUM_COMP is the number of compartiments in the Bühlmann ZH-L16 model, ie 16.
+ − 81 NUM_STOPS is the maximum number of stops computed by decoplanning.
+ − 82 Note that the deapest stop is roughly limited to 3m * NUM_STOPS
+ − 83 (this is assuming all stops up to the surface are used).
+ − 84 Note also that if the table overflow, extra stops are ignored,
+ − 85 and not reported in TTS summing.
+ − 86 NUM_GAS is the number of (potentially) active gas considered during
+ − 87 ascent simulation.
+ − 88 #endif
+ − 89 #define NUM_COMP 0x10
+ − 90 #define NUM_STOPS 0x20
+ − 91 #define NUM_GAS 5
+ − 92
+ − 93 VAR_UINT (int_O_gtissue_limit);
+ − 94 VAR_UINT (int_O_gtissue_press);
+ − 95 VAR_UINT (int_O_desaturation_time); //
+ − 96 VAR_UINT (int_O_ascenttime); // TTS (in minutes)
+ − 97 VAR_UINT (int_O_extra_ascenttime); // TTS for @+5min variant (in minutes)
+ − 98 VAR_UINT (int_O_CNS_fraction); // new in v.101
+ − 99
+ − 100 VAR_UCHAR (char_O_nullzeit); //
+ − 101 VAR_UCHAR (char_O_deco_status); // Deko state-machine state.
+ − 102 VAR_UCHAR (char_O_deco_last_stop); // Depth reached during deko planning.
+ − 103 VAR_UCHAR (char_O_gradient_factor); //
+ − 104 VAR_UCHAR (char_O_gtissue_no); //
+ − 105 VAR_UCHAR (char_O_diluent); // new in v.101
+ − 106 VAR_UCHAR (char_O_flush_ppO2); // 2011-05-01: ppO2 from diluant (CCR mode).
+ − 107 VAR_UCHAR (char_O_EAD); // 2011-05-01: Added EAD/END in deco model.
+ − 108 VAR_UCHAR (char_O_END); // 2011-05-01: Added EAD/END in deco model.
+ − 109 VAR_UCHAR (char_O_relative_gradient_GF); // new in v.102
+ − 110
+ − 111 VAR_UCHAR (char_O_first_deco_depth); // Depth of first stop.
+ − 112 VAR_UCHAR (char_O_first_deco_time) ; // Duration of first stop.
+ − 113 TAB_UCHAR (char_O_deco_depth, NUM_STOPS); // Fusionned decompression table:
+ − 114 TAB_UCHAR (char_O_deco_time, NUM_STOPS); // Both ZH-L16 and L16-GF models.
+ − 115 TAB_UCHAR (char_O_deco_time_for_log, NUM_STOPS); // For logging the full decoplan
+ − 116
+ − 117 TAB_UCHAR (char_O_tissue_N2_saturation, NUM_COMP); // Nitrogen compartiment desaturation time, in min.
+ − 118 TAB_UCHAR (char_O_tissue_He_saturation, NUM_COMP); // Helium compartiment desaturation time, in min.
+ − 119
+ − 120 TAB_UINT (int_O_gas_volumes, 5); // Volumes evaluation for each gas tank, in 0.1 liters.
+ − 121
+ − 122 #ifdef __18CXX
+ − 123 //---- BANK 4 DATA -------------------------------------------------------
+ − 124 // Gather all data ASM-code --> C-code
+ − 125 # pragma udata overlay bank4=0x400
+ − 126 #else
+ − 127 ; In ASM, put the same bank, in overlay mode, at the same address
+ − 128 bank4 udata_ovr 0x400
+ − 129 #endif
+ − 130
+ − 131 VAR_UCHAR (char_I_step_is_1min); // Use 1min integration for tissue and CNS.
+ − 132
+ − 133 VAR_UINT (int_I_pres_respiration); //
+ − 134 VAR_UINT (int_I_pres_surface); //
+ − 135 VAR_UINT (int_I_temp); // new in v101
+ − 136 VAR_UINT (int_I_divemins); // Dive time (minutes)
+ − 137 VAR_UCHAR (char_I_temp); // new in v101
+ − 138 VAR_UCHAR (char_I_actual_ppO2); //
+ − 139 VAR_UCHAR (char_I_first_gas); // Gas used at start of dive (bottom mix)
+ − 140 VAR_UCHAR (char_I_current_gas); // Current gas breathed (1..3).
+ − 141 VAR_UCHAR (char_I_N2_ratio); //
+ − 142 VAR_UCHAR (char_I_He_ratio); //
+ − 143 VAR_UCHAR (char_I_O2_ratio); //
+ − 144 VAR_UCHAR (char_I_saturation_multiplier); // for conservatism/safety values 1.0 no conservatism to 1.5 50% faster saturation
+ − 145 VAR_UCHAR (char_I_desaturation_multiplier);// for conservatism/safety values 0.66 50% slower desaturation to 1.0 no conservatism// consveratism used in calc_tissue , calc_tissue_step_1_min and sim_tissue_1min
+ − 146 VAR_UCHAR (char_I_GF_High_percentage); // new in v.102
+ − 147 VAR_UCHAR (char_I_GF_Low_percentage); // new in v.102
+ − 148 VAR_UCHAR (char_I_deco_distance); //
+ − 149 VAR_UCHAR (char_I_depth_last_deco); // new in v.101 unit: [m]
+ − 150 VAR_UCHAR (char_I_deco_model); // new in v.102. 0 == ZH-L16, 1 = ZH-L16-GF (Gradiant factor)
+ − 151 VAR_UCHAR (char_I_bottom_depth); // Bottom depth for planning (used in gas volume evaluation).
+ − 152 VAR_UCHAR (char_I_bottom_time); // Bottom time for planning (used in gas volume evaluation).
+ − 153 VAR_UCHAR (char_I_dive_interval); // Delay before next dive simulation.
+ − 154 VAR_UCHAR (char_I_const_ppO2); // new in v.101
+ − 155
+ − 156 TAB_UCHAR (char_I_deco_enable, NUM_GAS); // new in v.101
+ − 157
+ − 158 TAB_UCHAR (char_I_deco_gas_change,NUM_GAS); // new in v.101
+ − 159 TAB_UCHAR (char_I_dil_change,NUM_GAS); // Must be placed after char_I_deco_gas_change!
+ − 160
+ − 161 TAB_UCHAR (char_I_setpoint_change,NUM_GAS); // Change depths in m
+ − 162 TAB_UCHAR (char_I_deco_N2_ratio, NUM_GAS); // new in v.101
+ − 163 TAB_UCHAR (char_I_deco_He_ratio, NUM_GAS); // new in v.101
+ − 164
+ − 165 TAB_UCHAR (char_I_setpoint_cbar,NUM_GAS); // Setpoints in cbar
+ − 166
+ − 167 VAR_UCHAR (char_I_bottom_usage); // [l/min]
+ − 168 VAR_UCHAR (char_I_deco_usage); // [l/min]
+ − 169
+ − 170 VAR_UCHAR (char_I_extra_time); // [min]
+ − 171 VAR_UCHAR (temp_bankx400); // temp