Mercurial > public > hwos_code
annotate src/shared_definitions.h @ 521:06e9370c6d75
CHANGE: Apply safety margin parameters to both models (GF and non-GF)
Put B?hlmann constants in code for readability
Fix unused gas warning (Do not warn)
| author | heinrichsweikamp |
|---|---|
| date | Fri, 04 Aug 2017 16:01:28 +0200 |
| parents | f0828110d864 |
| children | b7eb98dbd800 |
| rev | line source |
|---|---|
| 0 | 1 #ifdef xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx |
| 2 ; | |
| 3 ; shared_definitions.h | |
| 4 ; | |
| 5 ; Declare variables used both in C and ASM code | |
| 6 ; | |
| 7 ; This program is free software: you can redistribute it and/or modify | |
| 8 ; it under the terms of the GNU General Public License as published by | |
| 9 ; the Free Software Foundation, either version 3 of the License, or | |
| 10 ; (at your option) any later version. | |
| 11 ; | |
| 12 ; This program is distributed in the hope that it will be useful, | |
| 13 ; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 ; GNU General Public License for more details. | |
| 16 ; | |
| 17 ; You should have received a copy of the GNU General Public License | |
| 18 ; along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 19 ; | |
| 20 ; Copyright (c) 2010, JD Gascuel. | |
| 21 ;============================================================================= | |
| 22 ; RATIONAL | |
| 23 ; | |
| 24 ; We must enforce good data passing between the C and the ASM parts of code. | |
| 25 ; The previous design used two independant definitions of each variable, | |
| 26 ; one in C, one in ASM. If they did not match, no error was generated, and | |
| 27 ; anything can happend at runtime... | |
| 28 ; | |
| 29 ; The new design use LINKING to ensure the variables defined in C are at the | |
| 30 ; same address when used in ASM code. And it uses a unique declaration file | |
| 31 ; (with suitable macros) to make sure they have the same size in both language. | |
| 32 ; | |
| 33 ; HISTORY | |
| 34 ; 2011-01-20: [jDG] Creation. | |
| 35 ; | |
| 36 ; NOTE | |
| 37 ; | |
| 38 ; This file have to obey both ASM and C syntax. The only common directives | |
| 39 ; are #if/#ifdef/#endif and the #define, so they are eavily used to do the | |
| 40 ; trick. | |
| 41 ; | |
| 42 ; BUGS | |
| 43 ;============================================================================= | |
| 44 ; HISTORY | |
| 45 #endif | |
| 46 | |
| 47 #ifdef __18CXX | |
| 48 //------------------------------------------------------------------------ | |
| 49 // C-style declarations: | |
| 50 # ifndef TEST_MAIN | |
| 51 # define VAR_UCHAR(n) extern unsigned char n | |
| 52 # define TAB_UCHAR(n,size) extern unsigned char n[size] | |
| 53 # define VAR_UINT(n) extern unsigned short n | |
| 54 # define TAB_UINT(n,size) extern unsigned short n[size] | |
| 55 # else | |
| 56 # define VAR_UCHAR(n) unsigned char n | |
| 57 # define TAB_UCHAR(n,size) unsigned char n[size] | |
| 58 # define VAR_UINT(n) unsigned short n | |
| 59 # define TAB_UINT(n,size) unsigned short n[size] | |
| 60 # endif | |
| 61 #else | |
| 62 ;------------------------------------------------------------------------- | |
| 63 ; ASM-style declarations: | |
| 64 #define VAR_UCHAR(n) n res 1 | |
| 65 #define TAB_UCHAR(n,size) n res size | |
| 66 #define VAR_UINT(n) n res 2 | |
| 67 #define TAB_UINT(n,size) n res 2*size | |
| 68 #endif | |
| 69 | |
| 70 #ifdef __18CXX | |
| 71 //---- BANK 3 DATA ------------------------------------------------------- | |
| 72 // Gather all data C-code --> ASM-code | |
| 73 # pragma udata overlay bank3=0x300 | |
| 74 #else | |
| 75 bank3 udata_ovr 0x300 | |
| 76 #endif | |
| 77 | |
|
210
7dbc1d780ca5
do not clear char_O_deco_gas in copy_deco_table
heinrichsweikamp
parents:
126
diff
changeset
|
78 |
| 0 | 79 #ifdef xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx |
| 80 Define model dimensions. | |
| 81 NUM_COMP is the number of compartiments in the Bühlmann ZH-L16 model, ie 16. | |
| 82 NUM_STOPS is the maximum number of stops computed by decoplanning. | |
| 83 Note that the deapest stop is roughly limited to 3m * NUM_STOPS | |
| 84 (this is assuming all stops up to the surface are used). | |
| 85 Note also that if the table overflow, extra stops are ignored, | |
| 86 and not reported in TTS summing. | |
| 87 NUM_GAS is the number of (potentially) active gas considered during | |
| 88 ascent simulation. | |
| 89 #endif | |
| 90 #define NUM_COMP 0x10 | |
| 91 #define NUM_STOPS 0x20 | |
| 92 #define NUM_GAS 5 | |
| 93 | |
| 94 VAR_UINT (int_O_gtissue_press); | |
| 95 VAR_UINT (int_O_desaturation_time); // | |
| 96 VAR_UINT (int_O_ascenttime); // TTS (in minutes) | |
| 97 VAR_UINT (int_O_extra_ascenttime); // TTS for @+5min variant (in minutes) | |
| 98 VAR_UINT (int_O_CNS_fraction); // new in v.101 | |
| 99 | |
| 100 VAR_UCHAR (char_O_nullzeit); // | |
| 101 VAR_UCHAR (char_O_deco_status); // Deko state-machine state. | |
| 102 VAR_UCHAR (char_O_deco_last_stop); // Depth reached during deko planning. | |
| 103 VAR_UCHAR (char_O_gradient_factor); // | |
| 104 VAR_UCHAR (char_O_gtissue_no); // | |
| 105 VAR_UCHAR (char_O_diluent); // new in v.101 | |
| 106 VAR_UCHAR (char_O_flush_ppO2); // 2011-05-01: ppO2 from diluant (CCR mode). | |
| 107 VAR_UCHAR (char_O_EAD); // 2011-05-01: Added EAD/END in deco model. | |
| 108 VAR_UCHAR (char_O_END); // 2011-05-01: Added EAD/END in deco model. | |
| 109 | |
| 110 VAR_UCHAR (char_O_first_deco_depth); // Depth of first stop. | |
| 111 VAR_UCHAR (char_O_first_deco_time) ; // Duration of first stop. | |
| 112 TAB_UCHAR (char_O_deco_depth, NUM_STOPS); // Fusionned decompression table: | |
| 113 TAB_UCHAR (char_O_deco_time, NUM_STOPS); // Both ZH-L16 and L16-GF models. | |
| 111 | 114 TAB_UCHAR (char_O_deco_gas, NUM_STOPS); // Both ZH-L16 and L16-GF models. |
| 0 | 115 TAB_UCHAR (char_O_deco_time_for_log, NUM_STOPS); // For logging the full decoplan |
| 116 | |
| 117 TAB_UCHAR (char_O_tissue_N2_saturation, NUM_COMP); // Nitrogen compartiment desaturation time, in min. | |
| 118 TAB_UCHAR (char_O_tissue_He_saturation, NUM_COMP); // Helium compartiment desaturation time, in min. | |
| 119 | |
| 120 TAB_UINT (int_O_gas_volumes, 5); // Volumes evaluation for each gas tank, in 0.1 liters. | |
| 123 | 121 VAR_UINT (int_O_ceiling); // in mbar |
| 0 | 122 |
| 123 #ifdef __18CXX | |
| 124 //---- BANK 4 DATA ------------------------------------------------------- | |
| 125 // Gather all data ASM-code --> C-code | |
| 126 # pragma udata overlay bank4=0x400 | |
| 127 #else | |
| 128 ; In ASM, put the same bank, in overlay mode, at the same address | |
| 129 bank4 udata_ovr 0x400 | |
| 130 #endif | |
| 131 | |
| 132 VAR_UCHAR (char_I_step_is_1min); // Use 1min integration for tissue and CNS. | |
| 133 | |
| 134 VAR_UINT (int_I_pres_respiration); // | |
| 135 VAR_UINT (int_I_pres_surface); // | |
| 136 VAR_UINT (int_I_temp); // new in v101 | |
| 137 VAR_UINT (int_I_divemins); // Dive time (minutes) | |
| 138 VAR_UCHAR (char_I_temp); // new in v101 | |
| 139 VAR_UCHAR (char_I_actual_ppO2); // | |
| 140 VAR_UCHAR (char_I_first_gas); // Gas used at start of dive (bottom mix) | |
| 377 | 141 VAR_UCHAR (char_I_current_gas); // Current gas breathed (1..6). |
| 0 | 142 VAR_UCHAR (char_I_N2_ratio); // |
| 143 VAR_UCHAR (char_I_He_ratio); // | |
| 144 VAR_UCHAR (char_I_O2_ratio); // | |
| 145 VAR_UCHAR (char_I_saturation_multiplier); // for conservatism/safety values 1.0 no conservatism to 1.5 50% faster saturation | |
| 146 VAR_UCHAR (char_I_desaturation_multiplier);// for conservatism/safety values 0.66 50% slower desaturation to 1.0 no conservatism// consveratism used in calc_tissue , calc_tissue_step_1_min and sim_tissue_1min | |
| 147 VAR_UCHAR (char_I_GF_High_percentage); // new in v.102 | |
| 148 VAR_UCHAR (char_I_GF_Low_percentage); // new in v.102 | |
| 149 VAR_UCHAR (char_I_deco_distance); // | |
| 150 VAR_UCHAR (char_I_depth_last_deco); // new in v.101 unit: [m] | |
| 151 VAR_UCHAR (char_I_deco_model); // new in v.102. 0 == ZH-L16, 1 = ZH-L16-GF (Gradiant factor) | |
| 152 VAR_UCHAR (char_I_bottom_depth); // Bottom depth for planning (used in gas volume evaluation). | |
| 153 VAR_UCHAR (char_I_bottom_time); // Bottom time for planning (used in gas volume evaluation). | |
| 154 VAR_UCHAR (char_I_dive_interval); // Delay before next dive simulation. | |
| 155 VAR_UCHAR (char_I_const_ppO2); // new in v.101 | |
| 156 | |
| 157 TAB_UCHAR (char_I_deco_gas_change,NUM_GAS); // new in v.101 | |
| 158 TAB_UCHAR (char_I_dil_change,NUM_GAS); // Must be placed after char_I_deco_gas_change! | |
| 159 | |
| 160 TAB_UCHAR (char_I_setpoint_change,NUM_GAS); // Change depths in m | |
| 161 TAB_UCHAR (char_I_deco_N2_ratio, NUM_GAS); // new in v.101 | |
| 162 TAB_UCHAR (char_I_deco_He_ratio, NUM_GAS); // new in v.101 | |
| 163 | |
| 164 TAB_UCHAR (char_I_setpoint_cbar,NUM_GAS); // Setpoints in cbar | |
| 165 | |
| 166 VAR_UCHAR (char_I_bottom_usage); // [l/min] | |
| 167 VAR_UCHAR (char_I_deco_usage); // [l/min] | |
| 168 | |
| 169 VAR_UCHAR (char_I_extra_time); // [min] | |
| 170 VAR_UCHAR (temp_bankx400); // temp |