Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 783: (0) -120 +120 tip
age author description
22 months ago Ideenmodellierer Update digital O2 sensor information:
22 months ago Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
22 months ago Ideenmodellierer Update real multiplexer implementation:
22 months ago Ideenmodellierer Discovery<=>SmallCPU inferface update:
22 months ago Ideenmodellierer Added UART multiplexer support for DiveO2:
22 months ago heinrichsweikamp Zusammenf?hren
22 months ago heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
22 months ago heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
23 months ago heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
23 months ago heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
23 months ago heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
23 months ago izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
23 months ago heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
23 months ago heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
23 months ago heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
23 months ago heinrichsweikamp 1.6.2 release
24 months ago heinrichsweikamp Update build for testing
24 months ago heinrichsweikamp change button default responsiveness to 100
24 months ago heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
2023-03-27 heinrichsweikamp Update build for testing
2023-03-26 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
2023-03-26 heinrichsweikamp Preparing a 1.6.2 release candidate
2023-03-21 heinrichsweikamp Fix/handle negative scrubber timer values
2023-03-21 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
2023-03-17 heinrichsweikamp Some compass improvements from mikeller
2023-03-15 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
2023-03-07 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
2023-03-07 Ideenmodellierer Added visualization of CO2 during dive:
2023-03-07 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
2023-03-07 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
2023-03-07 Ideenmodellierer Updated outdated comment
2023-03-07 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
2023-03-13 Ideenmodellierer resolv merge
2023-03-05 Ideenmodellierer Avoid blinking in customer view selection page:
2023-03-13 Ideenmodellierer Added enum for Co2 display
2023-03-05 Ideenmodellierer Added display of co2 ppm values:
2023-03-05 Ideenmodellierer Added pressure compensation to CO2 detection:
2023-02-21 Ideenmodellierer Code cleanup sensors under development:
2023-02-19 Ideenmodellierer Update Sentinel protocol:
2023-02-19 Ideenmodellierer Added DiveO2 fatal error detection:
2023-02-19 Ideenmodellierer Enable start dive in Big font display:
2023-02-19 Ideenmodellierer Update Sentinel protocol:
2023-02-02 Ideenmodellierer Added button lock after wakeup in surface mode:
2023-02-02 Ideenmodellierer Added button lock after wakeup in surface mode:
2023-02-02 Ideenmodellierer Enable start dive in Big font display:
2023-02-02 Ideenmodellierer Added data init function for external interface:
2023-03-06 heinrichsweikamp NEW: Add mini compass with marker declination indication
2023-03-03 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
2023-02-14 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
2023-01-15 Ideenmodellierer Removed interface selection from sensor menu:
2023-01-15 Ideenmodellierer Optical sensor as default:
2023-01-15 Ideenmodellierer Fix compiler switch:
2023-01-15 Ideenmodellierer Improvment sensor Autodetection:
2023-01-14 Ideenmodellierer Update sensor menu support for automatic sensor detection:
2023-01-14 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
2023-01-14 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
2023-01-14 Ideenmodellierer Enabled CO2 support for beta test phase:
2023-01-14 Ideenmodellierer Bugfix data synchronization after RTE start:
2023-01-07 Ideenmodellierer Update CO2 sensor implementation:
2023-01-05 Ideenmodellierer Development feature: external pressure sensor
2023-01-05 Ideenmodellierer DigO2 added raw data request:
2023-01-05 Ideenmodellierer Show saturation in large font (T3) view:
2023-01-05 Ideenmodellierer DigO2 added raw data request:
2023-01-03 Ideenmodellierer Bugfix set date (year):
2022-11-27 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
2022-11-20 Ideenmodellierer Updated menu structure to support new sensor information page:
2022-11-20 Ideenmodellierer Added new info page for extended sensor data:
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Bugfix PSCR menu button label:
2022-11-08 Ideenmodellierer Development bugfix number of spare bytes in setting structure
2022-11-08 Ideenmodellierer Extension scrubber time:
2022-11-08 Ideenmodellierer Bugfix compass bearing:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
2022-11-01 Ideenmodellierer Bugfix release frame:
2022-10-28 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
2022-10-28 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
2022-10-28 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
2022-10-28 Ideenmodellierer Bugfix display of deactivated sensors:
2022-10-18 Ideenmodellierer Bugfix motioncontrol frame deactivation:
2022-10-18 Ideenmodellierer Cleanup warnings:
2022-09-25 Ideenmodellierer Bugfix Empty menu:
2022-09-25 Ideenmodellierer Improvment key event detection:
2022-08-19 heinrichsweikamp Merge
2022-08-19 heinrichsweikamp 1.6.0 release Betatest
2022-08-06 heinrichsweikamp Update current build for testing Betatest
2022-08-05 Ideenmodellierer Improvment charge percent visualization: Betatest
2022-08-05 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
2022-08-05 Ideenmodellierer Improvment external interface usage: Betatest
2022-08-05 Ideenmodellierer Added Sentinel protocoll support: Betatest
2022-08-05 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
2022-08-05 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
2022-08-05 Ideenmodellierer Increased version numbers: Betatest
2022-08-05 Ideenmodellierer Bugfix Battery charge complete event: Betatest
2022-08-03 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
2022-06-02 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
2022-05-16 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
2022-04-25 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
2022-04-25 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
2022-04-25 Ideenmodellierer Bugfix visualization better setpoint: Betatest
2022-04-22 Jan Mulder cleanup: Use correct "per" symbol Betatest
2022-04-21 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
2022-04-20 Jan Mulder Move include file to common to ... Betatest
2021-11-22 Jan Mulder Allow longer scrubber time Betatest
2022-03-30 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
2022-03-30 heinrichsweikamp Zusammenf?hren Betatest
2022-03-30 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
2022-03-12 Ideenmodellierer Added Charging view: Betatest
2022-03-12 Ideenmodellierer Support of unknown charging counter values: Betatest
2022-03-12 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Increased version number Betatest
2022-03-12 heinrichsweikamp increase version numbers for upcomming release Betatest
2021-12-24 heinrichsweikamp update test build Betatest
2021-12-21 Ideenmodellierer Stability improvment bluetooth startup: Betatest
less more | rev 783: (0) -120 +120 tip