Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 794: (0) -300 -100 -48 +48 +100 tip
age author description
Mon, 31 Jul 2023 19:46:29 +0200 Ideenmodellierer Restructure UART based sensor handling:
Thu, 27 Jul 2023 21:52:19 +0200 Ideenmodellierer Bugfix PSCR Settings in Simulator Mode:
Sat, 05 Aug 2023 11:52:08 +0200 heinrichsweikamp Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Wed, 02 Aug 2023 08:41:03 +0200 heinrichsweikamp update current build for testing
Tue, 25 Jul 2023 14:48:58 +0200 heinrichsweikamp Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
Wed, 12 Jul 2023 10:13:25 +0200 heinrichsweikamp When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
Tue, 04 Jul 2023 14:39:06 +0200 heinrichsweikamp Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
Sun, 04 Jun 2023 21:59:26 +0200 Ideenmodellierer Dev Bugfx Empty buffer indication and stability improvments:
Sun, 04 Jun 2023 21:54:24 +0200 Ideenmodellierer Cleanup sensor data interface:
Wed, 31 May 2023 08:44:07 +0200 heinrichsweikamp Change support from Pyroscience -> DiveO2 sensors
Tue, 30 May 2023 18:44:20 +0200 Ideenmodellierer Bugfixloop UART multiplexer integration:
Mon, 29 May 2023 20:26:38 +0200 Ideenmodellierer Update digital O2 sensor information:
Mon, 29 May 2023 20:22:15 +0200 Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
Mon, 29 May 2023 18:26:55 +0200 Ideenmodellierer Update real multiplexer implementation:
Tue, 23 May 2023 21:50:19 +0200 Ideenmodellierer Discovery<=>SmallCPU inferface update:
Tue, 23 May 2023 21:45:34 +0200 Ideenmodellierer Added UART multiplexer support for DiveO2:
Mon, 22 May 2023 09:15:09 +0200 heinrichsweikamp Zusammenf?hren
Mon, 22 May 2023 09:14:27 +0200 heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Thu, 18 May 2023 09:49:17 +0200 heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 11 May 2023 12:13:03 +0200 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
less more | rev 794: (0) -300 -100 -48 +48 +100 tip