| Sat, 22 Apr 2023 21:11:50 -0500 |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
| Fri, 21 Apr 2023 09:48:23 +0200 |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
| Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| Fri, 21 Apr 2023 09:47:06 +0200 |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
| Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
| Wed, 12 Apr 2023 09:56:00 +0200 |
heinrichsweikamp |
Update build for testing
|
| Wed, 12 Apr 2023 09:30:15 +0200 |
heinrichsweikamp |
change button default responsiveness to 100
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Mon, 27 Mar 2023 10:04:53 +0200 |
heinrichsweikamp |
Update build for testing
|
| Sun, 26 Mar 2023 18:34:30 +0200 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
| Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| Tue, 21 Mar 2023 12:56:54 +0100 |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
| Fri, 17 Mar 2023 09:35:25 +0100 |
heinrichsweikamp |
Some compass improvements from mikeller
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Tue, 07 Mar 2023 22:14:20 +0100 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
| Tue, 07 Mar 2023 20:02:05 +0100 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
| Tue, 07 Mar 2023 19:59:02 +0100 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
| Tue, 07 Mar 2023 19:55:13 +0100 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
| Tue, 07 Mar 2023 19:52:18 +0100 |
Ideenmodellierer |
Updated outdated comment
|
| Tue, 07 Mar 2023 19:51:30 +0100 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
| Mon, 13 Mar 2023 22:23:00 +0100 |
Ideenmodellierer |
resolv merge
|
| Sun, 05 Mar 2023 22:17:32 +0100 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
| Mon, 13 Mar 2023 22:18:28 +0100 |
Ideenmodellierer |
Added enum for Co2 display
|
| Sun, 05 Mar 2023 22:14:53 +0100 |
Ideenmodellierer |
Added display of co2 ppm values:
|
| Sun, 05 Mar 2023 22:06:47 +0100 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
| Tue, 21 Feb 2023 21:19:31 +0100 |
Ideenmodellierer |
Code cleanup sensors under development:
|
| Sun, 19 Feb 2023 21:52:02 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
| Sun, 19 Feb 2023 21:51:19 +0100 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
| Sun, 19 Feb 2023 21:48:47 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| Sun, 19 Feb 2023 21:43:24 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
| Thu, 02 Feb 2023 17:35:54 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Thu, 02 Feb 2023 17:26:54 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| Thu, 02 Feb 2023 17:19:24 +0100 |
Ideenmodellierer |
Added data init function for external interface:
|
| Mon, 06 Mar 2023 16:03:00 +0100 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
| Fri, 03 Mar 2023 10:41:44 +0100 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
| Tue, 14 Feb 2023 10:21:56 +0100 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
| Sun, 15 Jan 2023 21:51:54 +0100 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
| Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
| Sun, 15 Jan 2023 21:45:14 +0100 |
Ideenmodellierer |
Fix compiler switch:
|
| Sun, 15 Jan 2023 21:43:33 +0100 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
| Sat, 14 Jan 2023 20:49:40 +0100 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
| Sat, 14 Jan 2023 20:46:17 +0100 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
| Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| Sat, 14 Jan 2023 20:37:20 +0100 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
| Sat, 14 Jan 2023 20:35:40 +0100 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
| Sat, 07 Jan 2023 18:11:52 +0100 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
| Thu, 05 Jan 2023 18:30:06 +0100 |
Ideenmodellierer |
Development feature: external pressure sensor
|
| Thu, 05 Jan 2023 18:27:04 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
| Thu, 05 Jan 2023 18:25:47 +0100 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
| Thu, 05 Jan 2023 18:22:21 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
| Tue, 03 Jan 2023 19:47:12 +0100 |
Ideenmodellierer |
Bugfix set date (year):
|
| Sun, 27 Nov 2022 15:18:00 +0100 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
| Sun, 20 Nov 2022 20:49:41 +0100 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
| Sun, 20 Nov 2022 20:46:10 +0100 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
| Sun, 20 Nov 2022 20:43:04 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Sun, 20 Nov 2022 20:42:08 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| Sun, 20 Nov 2022 20:37:44 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Sun, 20 Nov 2022 20:36:34 +0100 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
| Tue, 08 Nov 2022 22:16:56 +0100 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Tue, 08 Nov 2022 21:13:14 +0100 |
Ideenmodellierer |
Bugfix compass bearing:
|
| Thu, 03 Nov 2022 20:44:51 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| Thu, 03 Nov 2022 20:44:21 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| Thu, 03 Nov 2022 20:37:06 +0100 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
| Tue, 01 Nov 2022 09:55:45 +0100 |
Ideenmodellierer |
Bugfix release frame:
|
| Fri, 28 Oct 2022 20:49:21 +0200 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
| Fri, 28 Oct 2022 20:32:24 +0200 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
| Fri, 28 Oct 2022 20:29:37 +0200 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
| Fri, 28 Oct 2022 19:39:20 +0200 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
| Tue, 18 Oct 2022 21:21:32 +0200 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
| Tue, 18 Oct 2022 20:56:19 +0200 |
Ideenmodellierer |
Cleanup warnings:
|
| Sun, 25 Sep 2022 21:13:45 +0200 |
Ideenmodellierer |
Bugfix Empty menu:
|
| Sun, 25 Sep 2022 21:09:18 +0200 |
Ideenmodellierer |
Improvment key event detection:
|
| Fri, 19 Aug 2022 11:30:24 +0200 |
heinrichsweikamp |
Merge
|
| Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
| Sat, 06 Aug 2022 11:10:56 +0200 |
heinrichsweikamp |
Update current build for testing
Betatest
|
| Fri, 05 Aug 2022 16:04:52 +0200 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
| Fri, 05 Aug 2022 15:27:01 +0200 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
| Fri, 05 Aug 2022 15:26:28 +0200 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
| Fri, 05 Aug 2022 15:22:26 +0200 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
| Fri, 05 Aug 2022 15:15:01 +0200 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
| Fri, 05 Aug 2022 15:13:29 +0200 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
| Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
| Fri, 05 Aug 2022 14:56:17 +0200 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
| Wed, 03 Aug 2022 18:19:03 +0200 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
| Thu, 02 Jun 2022 20:24:59 +0200 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
| Mon, 16 May 2022 20:50:26 +0200 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
| Mon, 25 Apr 2022 21:15:01 +0200 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
| Mon, 25 Apr 2022 21:10:10 +0200 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
| Mon, 25 Apr 2022 21:07:28 +0200 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
| Fri, 22 Apr 2022 18:24:43 +0200 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
| Thu, 21 Apr 2022 21:02:50 +0200 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
| Wed, 20 Apr 2022 20:25:04 +0200 |
Jan Mulder |
Move include file to common to ...
Betatest
|
| Mon, 22 Nov 2021 19:39:11 +0100 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
| Wed, 30 Mar 2022 18:07:21 +0200 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
| Wed, 30 Mar 2022 18:01:29 +0200 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
| Wed, 30 Mar 2022 18:00:21 +0200 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
| Sat, 12 Mar 2022 23:01:11 +0100 |
Ideenmodellierer |
Added Charging view:
Betatest
|
| Sat, 12 Mar 2022 22:58:22 +0100 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
| Sat, 12 Mar 2022 22:54:26 +0100 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
| Sat, 12 Mar 2022 22:49:09 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| Sat, 12 Mar 2022 22:48:45 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| Sat, 12 Mar 2022 22:42:56 +0100 |
Ideenmodellierer |
Increased version number
Betatest
|
| Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
| Fri, 24 Dec 2021 13:40:47 +0100 |
heinrichsweikamp |
update test build
Betatest
|
| Tue, 21 Dec 2021 19:36:41 +0100 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
| Tue, 21 Dec 2021 19:32:29 +0100 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Mon, 01 Nov 2021 12:39:34 +0100 |
heinrichs weikamp |
Undo Rev. 660
|
| Sun, 08 Aug 2021 09:36:23 +0200 |
heinrichsweikamp |
Add option to reset bluetooth name
|
| Wed, 28 Apr 2021 09:47:25 +0200 |
heinrichs weikamp |
Update build file for testing
|
| Tue, 27 Apr 2021 21:29:26 +0200 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
| Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
| Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
| Sun, 25 Apr 2021 20:42:56 +0200 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| Sun, 25 Apr 2021 20:36:18 +0200 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
