Thu, 07 Mar 2024 21:46:49 +0100 |
Ideenmodellierer |
Bugfix Selection of custom views:
Evo_2_23
|
Thu, 07 Mar 2024 21:42:23 +0100 |
Ideenmodellierer |
Added line checks for System Menu:
Evo_2_23
|
Fri, 01 Mar 2024 19:30:29 +0100 |
Ideenmodellierer |
Check line enable/disable state when a new page is selected:
Evo_2_23
|
Thu, 29 Feb 2024 18:49:55 +0100 |
Ideenmodellierer |
Consider flipped screen for Predive menu:
Evo_2_23
|
Thu, 15 Feb 2024 21:26:28 +0100 |
Ideenmodellierer |
Bugfix tInfo_write_content_simple flip:
Evo_2_23
|
Tue, 13 Feb 2024 17:30:24 +0100 |
heinrichsweikamp |
Minor: Remove absolute paths from the reference project files
|
Sun, 21 Jan 2024 22:26:37 +0100 |
Ideenmodellierer |
Consider pressure offset compensation in case of setting a default value:
Evo_2_23
|
Sun, 21 Jan 2024 22:24:36 +0100 |
Ideenmodellierer |
Added new PreDiveCheck info page:
Evo_2_23
|
Sun, 21 Jan 2024 22:18:51 +0100 |
Ideenmodellierer |
Added option to adjust pressure to diveO2 reference:
Evo_2_23
|
Sat, 20 Jan 2024 19:38:52 +0100 |
Ideenmodellierer |
Update version number and set beta state
Evo_2_23
|
Mon, 15 Jan 2024 21:44:18 +0100 |
Ideenmodellierer |
Migrated Sentinel protocol to new UART structure:
Evo_2_23
|
Sun, 07 Jan 2024 21:25:34 +0100 |
Ideenmodellierer |
Added autofocus for T3_DecoTTS view:
Evo_2_23
|
Sun, 07 Jan 2024 21:21:58 +0100 |
Ideenmodellierer |
Development bugfix CO2 LLC:
Evo_2_23
|
Sun, 07 Jan 2024 21:20:15 +0100 |
Ideenmodellierer |
Code cleanup: UART protocol definitions
Evo_2_23
|
Fri, 05 Jan 2024 16:01:22 +0100 |
Ideenmodellierer |
Added T3 autofocus for Gas list:
Evo_2_23
|
Wed, 27 Dec 2023 19:37:17 +0100 |
ideenmodellierer |
Bugfixes and code cleanup for BF views:
Evo_2_23
|
Wed, 27 Dec 2023 19:24:44 +0100 |
ideenmodellierer |
Bugfix BF temperatur display and cv switching:
Evo_2_23
|
Sun, 17 Dec 2023 21:49:02 +0100 |
Ideenmodellierer |
Added autofocus for BF Navigation view:
Evo_2_23
|
Sun, 17 Dec 2023 21:14:17 +0100 |
Ideenmodellierer |
Added event based display changes for big font view:
Evo_2_23
|
Sun, 17 Dec 2023 21:10:04 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
Thu, 16 Nov 2023 20:37:20 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
Thu, 16 Nov 2023 20:36:35 +0100 |
Ideenmodellierer |
Activated work gas for (p)scr mode:
Evo_2_23
|
Thu, 16 Nov 2023 20:32:09 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not:
Evo_2_23
|
Thu, 16 Nov 2023 20:25:01 +0100 |
Ideenmodellierer |
Changes wording from travel gas to work gas to use same wording as for other OSTCs
Evo_2_23
|
Sun, 05 Nov 2023 20:21:42 +0100 |
Ideenmodellierer |
Added CO2 display to T3 Bigfont view:
Evo_2_23
|
Sun, 05 Nov 2023 20:19:08 +0100 |
Ideenmodellierer |
Moved CO2 Menu from Xtra to Hardware:
Evo_2_23
|
Wed, 11 Oct 2023 17:49:19 +0200 |
Ideenmodellierer |
Bugfix Line order of info screen with flip screen active:
Evo_2_23
|
Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
|
Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
Evo_2_23
|
Mon, 09 Oct 2023 15:10:10 +0200 |
Ideenmodellierer |
Starting 'Evo_2_23' branch
Evo_2_23
|
Mon, 09 Oct 2023 11:23:27 +0200 |
heinrichsweikamp |
User Test
|
Mon, 25 Sep 2023 10:56:32 +0200 |
heinrichsweikamp |
1.6.5 release
|
Sun, 24 Sep 2023 18:43:12 +0200 |
Ideenmodellierer |
Split definition of custom views:
|
Sun, 24 Sep 2023 18:39:26 +0200 |
Ideenmodellierer |
Added debug information in case an error in the settings has been detected:
|
Thu, 14 Sep 2023 13:24:30 +0200 |
heinrichsweikamp |
1.6.4 release
|
Tue, 12 Sep 2023 12:02:49 +0200 |
heinrichsweikamp |
Testing build
|
Sun, 10 Sep 2023 11:46:45 +0200 |
heinrichsweikamp |
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
|
Sun, 03 Sep 2023 18:03:49 +0200 |
Ideenmodellierer |
Bugfix CustomView selection during dive mode:
|
Sun, 03 Sep 2023 17:58:12 +0200 |
Ideenmodellierer |
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
|
Sun, 03 Sep 2023 17:53:07 +0200 |
Ideenmodellierer |
Used real sensor state in simulation:
|
Thu, 31 Aug 2023 10:33:25 +0200 |
heinrichsweikamp |
Testing build
|
Sun, 27 Aug 2023 20:59:12 +0200 |
Ideenmodellierer |
Added function to skip lines which are not needed for operation:
|
Sun, 27 Aug 2023 20:55:57 +0200 |
Ideenmodellierer |
Only jump to Sensor view during charging if sensors are connected:
|
Sun, 27 Aug 2023 20:51:13 +0200 |
Ideenmodellierer |
DevBugfix CO2 sensor in streaming mode:
|
Sat, 26 Aug 2023 13:38:13 +0200 |
heinrichsweikamp |
Testing build
|
Sat, 26 Aug 2023 13:37:06 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
Sat, 26 Aug 2023 13:35:15 +0200 |
heinrichsweikamp |
Update Firmware version number
|
Mon, 21 Aug 2023 17:20:07 +0200 |
heinrichsweikamp |
Adds a simple countdown timer, available as a custom view in surface and dive mode.
|
Thu, 10 Aug 2023 21:35:34 +0200 |
Ideenmodellierer |
Cleanup initialisation code:
|
Thu, 10 Aug 2023 21:30:24 +0200 |
Ideenmodellierer |
Cleanup initialisation / deinitialization:
|
Thu, 10 Aug 2023 21:27:58 +0200 |
Ideenmodellierer |
Removed dependency to protocol setting:
|
Thu, 10 Aug 2023 21:24:04 +0200 |
Ideenmodellierer |
Update RTE version number
|
Tue, 08 Aug 2023 17:29:03 +0200 |
Ideenmodellierer |
Cleanup warnings
|
Mon, 07 Aug 2023 20:32:42 +0200 |
Ideenmodellierer |
Added CO2 mirrow instance:
|
Mon, 07 Aug 2023 20:29:44 +0200 |
Ideenmodellierer |
Migrated CO2 protocol implementation to new format:
|
Mon, 31 Jul 2023 20:10:27 +0200 |
Ideenmodellierer |
Use mirror sensortype for visualization:
|
Mon, 31 Jul 2023 20:00:06 +0200 |
Ideenmodellierer |
Expanded Sensor map structure:
|
Mon, 31 Jul 2023 19:50:36 +0200 |
Ideenmodellierer |
Moved DiveO2 sensor specific funtionality into separated file:
|
Mon, 31 Jul 2023 19:46:29 +0200 |
Ideenmodellierer |
Restructure UART based sensor handling:
|
Thu, 27 Jul 2023 21:52:19 +0200 |
Ideenmodellierer |
Bugfix PSCR Settings in Simulator Mode:
|
Sat, 05 Aug 2023 11:52:08 +0200 |
heinrichsweikamp |
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
|
Wed, 02 Aug 2023 08:41:03 +0200 |
heinrichsweikamp |
update current build for testing
|
Tue, 25 Jul 2023 14:48:58 +0200 |
heinrichsweikamp |
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
|
Wed, 12 Jul 2023 10:13:25 +0200 |
heinrichsweikamp |
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
|
Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
Sun, 04 Jun 2023 21:59:26 +0200 |
Ideenmodellierer |
Dev Bugfx Empty buffer indication and stability improvments:
|
Sun, 04 Jun 2023 21:54:24 +0200 |
Ideenmodellierer |
Cleanup sensor data interface:
|
Wed, 31 May 2023 08:44:07 +0200 |
heinrichsweikamp |
Change support from Pyroscience -> DiveO2 sensors
|
Tue, 30 May 2023 18:44:20 +0200 |
Ideenmodellierer |
Bugfixloop UART multiplexer integration:
|
Mon, 29 May 2023 20:26:38 +0200 |
Ideenmodellierer |
Update digital O2 sensor information:
|
Mon, 29 May 2023 20:22:15 +0200 |
Ideenmodellierer |
Sensor status support for multiplexed DiveO2 sensors:
|
Mon, 29 May 2023 18:26:55 +0200 |
Ideenmodellierer |
Update real multiplexer implementation:
|
Tue, 23 May 2023 21:50:19 +0200 |
Ideenmodellierer |
Discovery<=>SmallCPU inferface update:
|
Tue, 23 May 2023 21:45:34 +0200 |
Ideenmodellierer |
Added UART multiplexer support for DiveO2:
|
Mon, 22 May 2023 09:15:09 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
Mon, 22 May 2023 09:14:27 +0200 |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
Thu, 11 May 2023 12:13:03 +0200 |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
Wed, 10 May 2023 16:25:39 +0200 |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
Wed, 10 May 2023 16:24:57 +0200 |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
Sat, 22 Apr 2023 21:11:50 -0500 |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
Fri, 21 Apr 2023 09:48:23 +0200 |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
Fri, 21 Apr 2023 09:47:06 +0200 |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
Wed, 12 Apr 2023 09:56:00 +0200 |
heinrichsweikamp |
Update build for testing
|
Wed, 12 Apr 2023 09:30:15 +0200 |
heinrichsweikamp |
change button default responsiveness to 100
|
Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
Mon, 27 Mar 2023 10:04:53 +0200 |
heinrichsweikamp |
Update build for testing
|
Sun, 26 Mar 2023 18:34:30 +0200 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
Tue, 21 Mar 2023 12:56:54 +0100 |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
Fri, 17 Mar 2023 09:35:25 +0100 |
heinrichsweikamp |
Some compass improvements from mikeller
|
Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
Tue, 07 Mar 2023 22:14:20 +0100 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
Tue, 07 Mar 2023 20:02:05 +0100 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
Tue, 07 Mar 2023 19:59:02 +0100 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
Tue, 07 Mar 2023 19:55:13 +0100 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
Tue, 07 Mar 2023 19:52:18 +0100 |
Ideenmodellierer |
Updated outdated comment
|
Tue, 07 Mar 2023 19:51:30 +0100 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
Mon, 13 Mar 2023 22:23:00 +0100 |
Ideenmodellierer |
resolv merge
|
Sun, 05 Mar 2023 22:17:32 +0100 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
Mon, 13 Mar 2023 22:18:28 +0100 |
Ideenmodellierer |
Added enum for Co2 display
|
Sun, 05 Mar 2023 22:14:53 +0100 |
Ideenmodellierer |
Added display of co2 ppm values:
|
Sun, 05 Mar 2023 22:06:47 +0100 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
Tue, 21 Feb 2023 21:19:31 +0100 |
Ideenmodellierer |
Code cleanup sensors under development:
|
Sun, 19 Feb 2023 21:52:02 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
Sun, 19 Feb 2023 21:51:19 +0100 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
Sun, 19 Feb 2023 21:48:47 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
Sun, 19 Feb 2023 21:43:24 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
Thu, 02 Feb 2023 17:35:54 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
Thu, 02 Feb 2023 17:26:54 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
Thu, 02 Feb 2023 17:19:24 +0100 |
Ideenmodellierer |
Added data init function for external interface:
|
Mon, 06 Mar 2023 16:03:00 +0100 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
Fri, 03 Mar 2023 10:41:44 +0100 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
Tue, 14 Feb 2023 10:21:56 +0100 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
Sun, 15 Jan 2023 21:51:54 +0100 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
Sun, 15 Jan 2023 21:45:14 +0100 |
Ideenmodellierer |
Fix compiler switch:
|
Sun, 15 Jan 2023 21:43:33 +0100 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
Sat, 14 Jan 2023 20:49:40 +0100 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
Sat, 14 Jan 2023 20:46:17 +0100 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
Sat, 14 Jan 2023 20:37:20 +0100 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
Sat, 14 Jan 2023 20:35:40 +0100 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
Sat, 07 Jan 2023 18:11:52 +0100 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
Thu, 05 Jan 2023 18:30:06 +0100 |
Ideenmodellierer |
Development feature: external pressure sensor
|
Thu, 05 Jan 2023 18:27:04 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
Thu, 05 Jan 2023 18:25:47 +0100 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
Thu, 05 Jan 2023 18:22:21 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
Tue, 03 Jan 2023 19:47:12 +0100 |
Ideenmodellierer |
Bugfix set date (year):
|
Sun, 27 Nov 2022 15:18:00 +0100 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
Sun, 20 Nov 2022 20:49:41 +0100 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
Sun, 20 Nov 2022 20:46:10 +0100 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
Sun, 20 Nov 2022 20:43:04 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
Sun, 20 Nov 2022 20:42:08 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
Sun, 20 Nov 2022 20:37:44 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
Sun, 20 Nov 2022 20:36:34 +0100 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
Tue, 08 Nov 2022 22:16:56 +0100 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
Tue, 08 Nov 2022 21:13:14 +0100 |
Ideenmodellierer |
Bugfix compass bearing:
|
Thu, 03 Nov 2022 20:44:51 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
Thu, 03 Nov 2022 20:44:21 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
Thu, 03 Nov 2022 20:37:06 +0100 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
Tue, 01 Nov 2022 09:55:45 +0100 |
Ideenmodellierer |
Bugfix release frame:
|
Fri, 28 Oct 2022 20:49:21 +0200 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
Fri, 28 Oct 2022 20:32:24 +0200 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
Fri, 28 Oct 2022 20:29:37 +0200 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
Fri, 28 Oct 2022 19:39:20 +0200 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
Tue, 18 Oct 2022 21:21:32 +0200 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
Tue, 18 Oct 2022 20:56:19 +0200 |
Ideenmodellierer |
Cleanup warnings:
|
Sun, 25 Sep 2022 21:13:45 +0200 |
Ideenmodellierer |
Bugfix Empty menu:
|
Sun, 25 Sep 2022 21:09:18 +0200 |
Ideenmodellierer |
Improvment key event detection:
|
Fri, 19 Aug 2022 11:30:24 +0200 |
heinrichsweikamp |
Merge
|
Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
Sat, 06 Aug 2022 11:10:56 +0200 |
heinrichsweikamp |
Update current build for testing
Betatest
|
Fri, 05 Aug 2022 16:04:52 +0200 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
Fri, 05 Aug 2022 15:27:01 +0200 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
Fri, 05 Aug 2022 15:26:28 +0200 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
Fri, 05 Aug 2022 15:22:26 +0200 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
Fri, 05 Aug 2022 15:15:01 +0200 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
Fri, 05 Aug 2022 15:13:29 +0200 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
Fri, 05 Aug 2022 14:56:17 +0200 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
Wed, 03 Aug 2022 18:19:03 +0200 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
Thu, 02 Jun 2022 20:24:59 +0200 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
Mon, 16 May 2022 20:50:26 +0200 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
Mon, 25 Apr 2022 21:15:01 +0200 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
Mon, 25 Apr 2022 21:10:10 +0200 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
Mon, 25 Apr 2022 21:07:28 +0200 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
Fri, 22 Apr 2022 18:24:43 +0200 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
Thu, 21 Apr 2022 21:02:50 +0200 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
Wed, 20 Apr 2022 20:25:04 +0200 |
Jan Mulder |
Move include file to common to ...
Betatest
|
Mon, 22 Nov 2021 19:39:11 +0100 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
Wed, 30 Mar 2022 18:07:21 +0200 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
Wed, 30 Mar 2022 18:01:29 +0200 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
Wed, 30 Mar 2022 18:00:21 +0200 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
Sat, 12 Mar 2022 23:01:11 +0100 |
Ideenmodellierer |
Added Charging view:
Betatest
|
Sat, 12 Mar 2022 22:58:22 +0100 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
Sat, 12 Mar 2022 22:54:26 +0100 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
Sat, 12 Mar 2022 22:49:09 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
Sat, 12 Mar 2022 22:48:45 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
Sat, 12 Mar 2022 22:42:56 +0100 |
Ideenmodellierer |
Increased version number
Betatest
|
Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
Fri, 24 Dec 2021 13:40:47 +0100 |
heinrichsweikamp |
update test build
Betatest
|
Tue, 21 Dec 2021 19:36:41 +0100 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
Tue, 21 Dec 2021 19:32:29 +0100 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
Mon, 01 Nov 2021 12:39:34 +0100 |
heinrichs weikamp |
Undo Rev. 660
|
Sun, 08 Aug 2021 09:36:23 +0200 |
heinrichsweikamp |
Add option to reset bluetooth name
|
Wed, 28 Apr 2021 09:47:25 +0200 |
heinrichs weikamp |
Update build file for testing
|
Tue, 27 Apr 2021 21:29:26 +0200 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
Sun, 25 Apr 2021 20:42:56 +0200 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
Sun, 25 Apr 2021 20:36:18 +0200 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
Mon, 19 Apr 2021 20:20:38 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
Mon, 19 Apr 2021 20:16:24 +0200 |
Ideenmodellierer |
Bugfix consider checkbox in calculation of right aligned and centered position:
|
Mon, 19 Apr 2021 20:14:20 +0200 |
Ideenmodellierer |
Motion detection: Enable focus after focus calibration:
|
Tue, 13 Apr 2021 19:25:41 +0200 |
Ideenmodellierer |
Integrated selection of bailout in the diluent selection page:
|
Tue, 13 Apr 2021 19:21:14 +0200 |
Ideenmodellierer |
Remove battery charge counter from information menu:
|
Tue, 13 Apr 2021 19:18:32 +0200 |
Ideenmodellierer |
Small changes in charger state handling:
|
Tue, 30 Mar 2021 10:34:12 +0200 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
Wed, 24 Mar 2021 22:06:00 +0100 |
Ideenmodellierer |
Reimplemented charger status generation (deactivated):
|
Wed, 24 Mar 2021 21:28:41 +0100 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
Thu, 11 Mar 2021 21:45:22 +0100 |
Ideenmodellierer |
Development Bugfix Deco bars not shown after last deco stop passed:
|
Thu, 11 Mar 2021 21:43:43 +0100 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
Thu, 25 Feb 2021 12:20:43 +0100 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
Wed, 24 Feb 2021 21:45:35 +0100 |
Ideenmodellierer |
Added last measured PPO2 value to sensor selection dialog:
|
Wed, 24 Feb 2021 21:04:07 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 21:03:54 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 21:03:22 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 19:18:26 +0100 |
Ideenmodellierer |
Enable sensor check for Analog PPO2 mode:
|
Tue, 23 Feb 2021 21:58:18 +0100 |
Ideenmodellierer |
Added menu structure to allow ppo2 modification in simulator mode:
|
Tue, 23 Feb 2021 21:55:52 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:55:26 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:54:56 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:53:24 +0100 |
Ideenmodellierer |
Added functionality to add ppo2 mV offset:
|
Fri, 12 Feb 2021 21:46:36 +0100 |
Ideenmodellierer |
Added compile switch for T3_PROFILE menu operation option
|
Fri, 12 Feb 2021 21:43:27 +0100 |
Ideenmodellierer |
Improve in / out of focus transitions:
|
Fri, 12 Feb 2021 21:37:50 +0100 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
Mon, 08 Feb 2021 21:35:46 +0100 |
Ideenmodellierer |
Switch Sector / Scroll detection to vector implementation:
|
Sun, 07 Feb 2021 22:05:32 +0100 |
Ideenmodellierer |
Development bugfix: Marker in standard t3 view drawn in wrong direction
|
Sun, 07 Feb 2021 22:04:43 +0100 |
Ideenmodellierer |
Improvment frame Handling:
|
Wed, 03 Feb 2021 21:45:48 +0100 |
Ideenmodellierer |
Adjustments for flipped display view:
|
Wed, 03 Feb 2021 21:44:22 +0100 |
Ideenmodellierer |
Use roll and pitch agles in 0-360 format:
|
Wed, 27 Jan 2021 22:12:44 +0100 |
Ideenmodellierer |
Added minilog functions to allow marker synchronisation:
|
Wed, 27 Jan 2021 22:10:11 +0100 |
Ideenmodellierer |
Added t3 quick menu for marker synchronisation:
|
Wed, 27 Jan 2021 22:04:45 +0100 |
Ideenmodellierer |
Development bugfix: focus state not remembered:
|
Wed, 27 Jan 2021 22:03:11 +0100 |
Ideenmodellierer |
Development bugfix: Low battery warning was interpretated as marker:
|
Wed, 27 Jan 2021 21:58:46 +0100 |
Ideenmodellierer |
Development bugfix: show replay symbol only for the selected dive:
|
Wed, 27 Jan 2021 21:56:48 +0100 |
Ideenmodellierer |
Moved non critical functions from timer interrupt to main loop:
|
Wed, 20 Jan 2021 20:05:05 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
Fri, 15 Jan 2021 21:33:07 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
Fri, 15 Jan 2021 21:20:29 +0100 |
Ideenmodellierer |
Bugfix inverted whitspace:
|
Thu, 14 Jan 2021 21:25:15 +0100 |
Ideenmodellierer |
Suspend MotionDetection events while diver is operationg the OSTC:
|
Thu, 14 Jan 2021 20:38:28 +0100 |
Ideenmodellierer |
Added access to logbook marker data:
|
Thu, 14 Jan 2021 19:17:28 +0100 |
Ideenmodellierer |
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
|
Fri, 05 Feb 2021 14:53:50 +0100 |
heinrichsweikamp |
Update RTE required value for release
|
Fri, 05 Feb 2021 14:50:18 +0100 |
heinrichsweikamp |
Added tag v1.5.6 release for changeset 06ec1da5e105
|
Fri, 05 Feb 2021 14:50:05 +0100 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
Thu, 07 Jan 2021 09:53:04 +0100 |
heinrichsweikamp |
change O2_CALIB_FRACTION_O2 to 0.98
|
Wed, 06 Jan 2021 21:01:00 +0100 |
Ideenmodellierer |
Merged menu items of viewport and motion control:
|
Wed, 06 Jan 2021 19:41:43 +0100 |
Ideenmodellierer |
T3 profile view: Added visualization of deco data
|
Tue, 05 Jan 2021 20:35:01 +0100 |
Ideenmodellierer |
Added replay data scaling in case life data is longer than replay block
|
Mon, 04 Jan 2021 22:49:07 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
Mon, 04 Jan 2021 22:45:37 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
Mon, 04 Jan 2021 21:48:31 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
Mon, 04 Jan 2021 21:41:51 +0100 |
Ideenmodellierer |
New replay block for T3 profile:
|
Mon, 04 Jan 2021 21:38:28 +0100 |
Ideenmodellierer |
MotionControl-Sector: Map sectors during switch T7 <=> T3:
|
Mon, 04 Jan 2021 21:35:38 +0100 |
Ideenmodellierer |
Added functionality to select a dive to be shown in the T3 profile view:
|
Mon, 04 Jan 2021 21:32:39 +0100 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
Mon, 04 Jan 2021 21:30:04 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
Mon, 04 Jan 2021 21:24:24 +0100 |
Ideenmodellierer |
Added PrintGraph option to skip invalid data entries:
|
Sun, 03 Jan 2021 14:43:16 +0100 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
Wed, 06 Jan 2021 22:02:49 +0100 |
heinrichsweikamp |
Minor: Comment translation into English
|
Tue, 22 Dec 2020 22:23:11 +0100 |
Ideenmodellierer |
Align VPM tag in log list to be at same position as GF tag:
|
Thu, 17 Dec 2020 10:58:28 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
Thu, 17 Dec 2020 09:52:12 +0100 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
Wed, 16 Dec 2020 09:43:11 +0100 |
heinrichsweikamp |
update ostc4pack sample files
|
Sun, 13 Dec 2020 18:31:40 +0100 |
Ideenmodellierer |
Motion control: Jump back to primary view if focus is lost:
|
Sun, 13 Dec 2020 18:29:12 +0100 |
Ideenmodellierer |
Reduced view angle and number of vusiualized custom views in setor mode:
|
Sat, 12 Dec 2020 21:05:11 +0100 |
Ideenmodellierer |
Added option for 100% o2 calibration:
|
Sat, 12 Dec 2020 20:54:31 +0100 |
Ideenmodellierer |
Solved minor warnings
|
Sat, 12 Dec 2020 20:52:58 +0100 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
Sat, 12 Dec 2020 19:18:57 +0100 |
Ideenmodellierer |
Added ex Interface measurement restart in case of i2c disturbance:
|
Sat, 12 Dec 2020 19:16:37 +0100 |
Ideenmodellierer |
Bugfix bad resolution of compass LSM303AGR:
|
Thu, 03 Dec 2020 13:17:32 +0100 |
heinrichsweikamp |
Minor: Functional inert cleanup of some unused variables
|
Sun, 29 Nov 2020 23:02:11 +0100 |
Ideenmodellierer |
Rework pitch detection:
|
Sun, 29 Nov 2020 22:58:11 +0100 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
Sun, 29 Nov 2020 22:55:31 +0100 |
Ideenmodellierer |
Return to o2 values:
|
Sun, 29 Nov 2020 22:53:33 +0100 |
Ideenmodellierer |
Change style of viewport calibration menu:
|
Wed, 25 Nov 2020 20:26:01 +0100 |
Ideenmodellierer |
Improved focus detection:
|
Wed, 25 Nov 2020 20:19:50 +0100 |
Ideenmodellierer |
Update String "Blickwinkel":
|
Wed, 25 Nov 2020 20:18:22 +0100 |
Ideenmodellierer |
Added debug view to viewport calibration:
|
Wed, 25 Nov 2020 20:16:20 +0100 |
Ideenmodellierer |
Reactivate compass parameter stored in NVM:
|
Mon, 30 Nov 2020 20:55:23 +0100 |
Ideenmodellierer |
Try to reduce legth of log entry string:
|
Mon, 30 Nov 2020 20:52:49 +0100 |
Ideenmodellierer |
Added new section "lower.font":
|
Sun, 29 Nov 2020 11:41:03 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
Sat, 21 Nov 2020 17:41:59 +0100 |
heinrichsweikamp |
add current build
|
Sun, 15 Nov 2020 20:12:19 +0100 |
Ideenmodellierer |
Bugfix center / right alignment if dualfont is used:
|
Sun, 15 Nov 2020 20:09:31 +0100 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
Sun, 15 Nov 2020 20:01:56 +0100 |
Ideenmodellierer |
Refine o2 sensor diagnostic functions:
|
Sun, 15 Nov 2020 19:58:14 +0100 |
Ideenmodellierer |
Added ADC sensor interface to O2 sensore menu structure:
|
Sun, 15 Nov 2020 19:54:36 +0100 |
Ideenmodellierer |
Solved minor warnings
|
Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
Sun, 15 Nov 2020 19:52:03 +0100 |
Ideenmodellierer |
Check if HW evaluation was performed:
|
Thu, 12 Nov 2020 20:06:04 +0100 |
Ideenmodellierer |
Changed operation mode of RecoverSampleIndex:
|
Thu, 12 Nov 2020 20:03:00 +0100 |
Ideenmodellierer |
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
|
Thu, 12 Nov 2020 19:54:58 +0100 |
Ideenmodellierer |
Switch source of o2 sensor data depending on availability of external ADC:
|
Thu, 12 Nov 2020 19:48:28 +0100 |
Ideenmodellierer |
Added HW_Info to Discovery <=> RTE data exchange:
|
Thu, 12 Nov 2020 19:46:03 +0100 |
Ideenmodellierer |
Added external ADC interface functionality (MCP3424):
|
Sun, 08 Nov 2020 18:49:54 +0100 |
Ideenmodellierer |
Added color indicator for focus state:
|
Sun, 08 Nov 2020 18:46:46 +0100 |
Ideenmodellierer |
Added menu structure to acces viewport calibration:
|
Sun, 08 Nov 2020 18:43:19 +0100 |
Ideenmodellierer |
Added viewport functionality:
|
Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
Sun, 08 Nov 2020 18:36:02 +0100 |
Ideenmodellierer |
Only execute motion detection functions if features is enabled:
|
Sun, 08 Nov 2020 16:38:43 +0100 |
Ideenmodellierer |
Update roll and pitch value in simulation mode:
|
Mon, 02 Nov 2020 21:17:45 +0100 |
Ideenmodellierer |
Added viewport calibration to dive menu:
|
Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
Tue, 03 Nov 2020 12:47:51 +0100 |
heinrichsweikamp |
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
|
Mon, 02 Nov 2020 12:13:02 +0100 |
heinrichsweikamp |
add current build
|
Sun, 11 Oct 2020 18:33:19 +0200 |
Ideenmodellierer |
Shortend t3 view names:
|
Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
Sat, 10 Oct 2020 18:34:10 +0200 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
Sat, 10 Oct 2020 18:30:13 +0200 |
Ideenmodellierer |
Bugfix return from submenu in t3 view:
|
Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
Sat, 10 Oct 2020 13:51:44 +0200 |
Ideenmodellierer |
BugFix firmware downgrade to version with less settings:
|
Wed, 07 Oct 2020 18:07:10 +0200 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
Wed, 07 Oct 2020 17:15:27 +0200 |
Ideenmodellierer |
Changed visualization of Depth / temperatur / debugview entry
|
Wed, 07 Oct 2020 17:12:44 +0200 |
Ideenmodellierer |
Increased max value for surface pressure:
|
Sun, 04 Oct 2020 15:50:43 +0200 |
heinrichsweikamp |
Added tag 1.5.5 release for changeset 02e7e11fdbe8
|
Fri, 25 Sep 2020 11:13:03 +0200 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
Wed, 16 Sep 2020 10:52:57 +0200 |
heinrichsweikamp |
add current build
|
Tue, 15 Sep 2020 20:57:04 +0200 |
Ideenmodellierer |
Bugfix custom view selection dialog:
|
Tue, 15 Sep 2020 20:54:54 +0200 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
Tue, 15 Sep 2020 20:52:39 +0200 |
Ideenmodellierer |
Added skip condition in custom view selection:
|
Sun, 13 Sep 2020 20:59:38 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
Sun, 13 Sep 2020 20:58:37 +0200 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
Sun, 13 Sep 2020 20:55:54 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
Sun, 13 Sep 2020 20:49:58 +0200 |
Ideenmodellierer |
Change color ID used in strings for light grey:
|
Sun, 13 Sep 2020 20:44:50 +0200 |
Ideenmodellierer |
Minor: Removed duplicated definition of number of available gases
|
Thu, 10 Sep 2020 20:52:47 +0200 |
Ideenmodellierer |
Changed string for data view selections:
|
Thu, 10 Sep 2020 20:51:36 +0200 |
Ideenmodellierer |
Added compile switch for motion control:
|
Thu, 10 Sep 2020 20:47:48 +0200 |
Ideenmodellierer |
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
|
Tue, 08 Sep 2020 21:24:14 +0200 |
Ideenmodellierer |
Moved custom view menu to new tab:
|
Sun, 06 Sep 2020 22:11:51 +0200 |
Ideenmodellierer |
Reset Safety Stop display in case of a new descend:
|
Sun, 06 Sep 2020 21:17:59 +0200 |
Ideenmodellierer |
Added T3_gaslist:
|
Sun, 06 Sep 2020 21:15:34 +0200 |
Ideenmodellierer |
Added color coding for cv gas list:
|
Sun, 06 Sep 2020 21:13:22 +0200 |
Ideenmodellierer |
Added quick menu function to big font view:
|
Sun, 06 Sep 2020 21:09:37 +0200 |
Ideenmodellierer |
Added missing display of button labels in refresh function:
|
Wed, 16 Sep 2020 10:30:28 +0200 |
heinrichsweikamp |
Properly send compass 3 into sleepmode (end-2019 hardware)
|
Mon, 31 Aug 2020 20:06:59 +0200 |
heinrichsweikamp |
Merge
|
Sun, 30 Aug 2020 17:31:29 +0200 |
Ideenmodellierer |
Added new strings for the selection of T3 custom views
|
Sun, 30 Aug 2020 17:30:54 +0200 |
Ideenmodellierer |
Minor adaptions in page layout:
|
Sun, 30 Aug 2020 17:26:52 +0200 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
Sun, 30 Aug 2020 17:26:00 +0200 |
Ideenmodellierer |
Show page number in small letters if more than 8 tabs are active
|
Sun, 30 Aug 2020 17:23:44 +0200 |
Ideenmodellierer |
Reimplementation of tMenuEdit_select:
|
Sun, 30 Aug 2020 17:20:16 +0200 |
Ideenmodellierer |
Added new menu tab into call structure
|
Sun, 30 Aug 2020 17:19:23 +0200 |
Ideenmodellierer |
Added new top level menu for customization of views
|
Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
Mon, 24 Aug 2020 19:31:05 +0200 |
Ideenmodellierer |
Added compile switch to enable / disable new BigFont layout
|
Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
Thu, 20 Aug 2020 21:25:38 +0200 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
Mon, 10 Aug 2020 15:53:45 +0200 |
heinrichsweikamp |
Added tag v1.5.4 release for changeset e9ca66ce36e5
|
Wed, 22 Jul 2020 11:55:53 +0200 |
heinrichsweikamp |
1.5.4 release
v1.5.4 release
|
Mon, 29 Jun 2020 16:18:17 +0200 |
heinrichsweikamp |
add wiki sub-directory
|
Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
Tue, 26 May 2020 19:27:07 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
|
Tue, 26 May 2020 21:13:12 +0200 |
ideenmodellierer |
Bugfix header EEPROM layout:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:13:00 +0200 |
ideenmodellierer |
Bugfix right alignment of string:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:12:46 +0200 |
ideenmodellierer |
Small corrections layout Divelog page 1:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:12:02 +0200 |
ideenmodellierer |
Development option only read bottledata:
FixLayout_Header_LogView
|
Tue, 19 May 2020 07:27:18 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
|
Mon, 18 May 2020 21:51:08 +0200 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
Wed, 13 May 2020 21:56:35 +0200 |
ideenmodellierer |
Code cleanup pressure plausibility check:
Improve_Button_Sleep
|
Wed, 13 May 2020 21:27:30 +0200 |
ideenmodellierer |
Bugfix unintended else condition:
Improve_Button_Sleep
|
Tue, 12 May 2020 23:03:50 +0200 |
ideenmodellierer |
Development option only: Show Pressure update for a short time in the custom field (as warning)
Improve_Button_Sleep
|
Tue, 12 May 2020 23:03:29 +0200 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:54:19 +0200 |
ideenmodellierer |
Balance value of button responsitivness were not considered during firmware startup:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:52:05 +0200 |
ideenmodellierer |
Changed default values:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:42:52 +0200 |
ideenmodellierer |
Added error detection for reading of ADC values in sleep mode:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:39:18 +0200 |
ideenmodellierer |
Do not signal power on reset in case of a "warm" reset:
Improve_Button_Sleep
|
Tue, 28 Apr 2020 15:37:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
|
Wed, 22 Apr 2020 13:08:57 +0200 |
Jan Mulder |
bugfix: implement battery charge percentage in dive header
fix-bat-2
|
Wed, 15 Apr 2020 07:01:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
|
Tue, 14 Apr 2020 19:45:34 +0200 |
ideenmodellierer |
Removed no longer needed reset profile function:
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:44:19 +0200 |
ideenmodellierer |
Moved and deactivated analyse sample buffer switch:
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:29:23 +0200 |
ideenmodellierer |
Cmd Get profile: transmit dummy profile if necessary
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:27:04 +0200 |
ideenmodellierer |
Removed invalidate header function because it is no lonnger needed
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:22:56 +0200 |
ideenmodellierer |
Compare profile length from header and sample data to identify valid profiles
Improve_Logtansfer
|
Mon, 13 Apr 2020 16:00:54 +0200 |
ideenmodellierer |
Added compile switch to handle additional data during raw header request:
Improve_Logtansfer
|
Sun, 12 Apr 2020 21:02:34 +0200 |
ideenmodellierer |
Added function to transfer sample buffer:
Improve_Logtansfer
|
Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
Mon, 30 Mar 2020 13:16:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
|
Sun, 29 Mar 2020 21:55:00 +0200 |
Ideenmodellierer |
merged default into minor_improvments
minor_improvments
|
Sun, 29 Mar 2020 21:39:57 +0200 |
ideenmodellierer |
Activated reset of sample information within header data at time of sector erasing:
minor_improvments
|
Sat, 28 Mar 2020 21:41:47 +0100 |
ideenmodellierer |
Added ppO2 to dummy profile data:
minor_improvments
|
Tue, 24 Mar 2020 22:32:48 +0100 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
Tue, 24 Mar 2020 22:14:16 +0100 |
ideenmodellierer |
Transfer a dummy profile in case of missing sample information:
minor_improvments
|
Tue, 24 Mar 2020 22:12:08 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
Tue, 24 Mar 2020 22:08:29 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
Tue, 24 Mar 2020 21:59:38 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
Tue, 24 Mar 2020 21:59:11 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
Tue, 24 Mar 2020 21:49:52 +0100 |
ideenmodellierer |
Allocate received bar value to active gas (was static allocated to gas[1])
minor_improvments
|
Tue, 24 Mar 2020 21:48:27 +0100 |
ideenmodellierer |
Added new compile switches for variants:
minor_improvments
|
Mon, 23 Mar 2020 21:14:54 +0100 |
ideenmodellierer |
Added initialization of bottle sensor data age counter
minor_improvments
|
Mon, 23 Mar 2020 21:13:52 +0100 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
Mon, 23 Mar 2020 21:10:02 +0100 |
ideenmodellierer |
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
minor_improvments
|
Thu, 05 Mar 2020 22:31:50 +0100 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
Thu, 05 Mar 2020 22:27:55 +0100 |
ideenmodellierer |
Removed duplicated definition:
minor_improvments
|
Sat, 29 Feb 2020 22:27:29 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sat, 29 Feb 2020 22:25:20 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sun, 01 Mar 2020 10:06:45 +0100 |
heinrichsweikamp |
fix potential issue with >255 dives in the logbook
|
Thu, 27 Feb 2020 09:13:25 +0100 |
heinrichsweikamp |
Added tag v1.5.3 release for changeset 5b4c78c36b04
|
Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
Mon, 24 Feb 2020 15:17:54 +0100 |
heinrichsweikamp |
update the 1.5.3 for tests
|
Mon, 24 Feb 2020 07:58:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
|
Sun, 23 Feb 2020 21:18:49 +0100 |
ideenmodellierer |
Moved power on detection to RTE:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:17:17 +0100 |
ideenmodellierer |
Bugfix display battery voltage in maintainance menu:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:13:28 +0100 |
ideenmodellierer |
Reduced timeout for common UART communication:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:09:56 +0100 |
ideenmodellierer |
Detect startup after power off:
Improve_BatteryGasGauge
|
Tue, 18 Feb 2020 12:41:45 +0100 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
Tue, 18 Feb 2020 07:20:29 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
|
Mon, 17 Feb 2020 19:43:09 +0100 |
ideenmodellierer |
Marked possible code improvment for future activities:
ImprovmentNVM_2
|
Mon, 17 Feb 2020 19:04:10 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
Sun, 16 Feb 2020 22:04:52 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:50:58 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:50:20 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:45:19 +0100 |
ideenmodellierer |
Added (optional) menu item to analyse log sample buffer:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:40:33 +0100 |
ideenmodellierer |
ext_Flash_write_sample erase sector optimization:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:29:12 +0100 |
ideenmodellierer |
Moved Timeout handling out of 100ms callback:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:25:09 +0100 |
ideenmodellierer |
Enable sequentionel writing of device data:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:15:27 +0100 |
ideenmodellierer |
Optimize ef_write_block function:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 08:23:15 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
|
Fri, 07 Feb 2020 16:38:11 +0100 |
Jan Mulder |
Added tag v1.5.2.beta release for changeset 54a480c43e97
maintain-2
|
Wed, 15 Jan 2020 13:41:01 +0100 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
Wed, 15 Jan 2020 10:53:15 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
|
Tue, 14 Jan 2020 21:52:15 +0100 |
Ideenmodellierer |
merged default into Improvment_NVM
Improment_NVM
|
Tue, 14 Jan 2020 21:38:45 +0100 |
ideenmodellierer |
Added compile switch for restoring of last known date after power lost:
Improment_NVM
|
Tue, 14 Jan 2020 21:10:37 +0100 |
ideenmodellierer |
Bugfix Flipdisplay Gauge and Apnoe mode:
Improment_NVM
|
Tue, 14 Jan 2020 21:08:45 +0100 |
ideenmodellierer |
Bugfix: Warnings displayed in Gauge Mode:
Improment_NVM
|
Mon, 13 Jan 2020 20:27:57 +0100 |
ideenmodellierer |
Bugfix: Limit log length in case of corrupted sample storage:
Improment_NVM
|
Sun, 12 Jan 2020 21:33:13 +0100 |
ideenmodellierer |
Bugfix display compass calibration frozen:
Improment_NVM
|
Sun, 12 Jan 2020 19:55:22 +0100 |
ideenmodellierer |
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter
Improment_NVM
|
Sun, 12 Jan 2020 19:50:14 +0100 |
ideenmodellierer |
Bugfix invalid voltage / temperatur after coldstart:
Improment_NVM
|
Sun, 12 Jan 2020 18:06:59 +0100 |
ideenmodellierer |
Bugfix parallel call of external flash functions:
Improment_NVM
|
Sun, 12 Jan 2020 17:57:11 +0100 |
ideenmodellierer |
Bugfix Min max values for device data checks:
Improment_NVM
|
Sun, 12 Jan 2020 17:47:02 +0100 |
ideenmodellierer |
Bugfix Display of Sensor values:
Improment_NVM
|
Sun, 12 Jan 2020 17:45:36 +0100 |
ideenmodellierer |
Bugfix: display of time of minimum voltag:
Improment_NVM
|
Wed, 08 Jan 2020 15:35:15 +0100 |
heinrichsweikamp |
We got one report of false/freezd depth reading when jumping into 2m depth
|
Sun, 05 Jan 2020 14:57:50 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
|
Sun, 29 Dec 2019 09:42:16 +0100 |
Ideenmodellierer |
merged default into ImproveBluetooth
ImproveBluetooth
|
Sat, 28 Dec 2019 19:42:04 +0100 |
ideenmodellierer |
Added retry through power off/on cycle:
ImproveBluetooth
|
Sat, 21 Dec 2019 20:21:26 +0100 |
ideenmodellierer |
Revert change to keep connection open in case of BlueMod messages:
ImproveBluetooth
|
Mon, 02 Dec 2019 22:03:05 +0100 |
ideenmodellierer |
Bugfix: Merge / cleanup problem:
ImproveBluetooth
|
Sun, 01 Dec 2019 19:55:15 +0100 |
ideenmodellierer |
Added missing enum for configuration states
ImproveBluetooth
|
Tue, 26 Nov 2019 22:12:25 +0100 |
ideenmodellierer |
Added function for BlueMod configuration:
ImproveBluetooth
|
Tue, 26 Nov 2019 21:17:57 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
Tue, 26 Nov 2019 21:16:36 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
Tue, 26 Nov 2019 21:14:58 +0100 |
ideenmodellierer |
Configurate FlowCntrl Pins as noPull
ImproveBluetooth
|
Tue, 26 Nov 2019 18:13:26 +0100 |
ideenmodellierer |
Bugfix negativ ascend bar:
ImproveBluetooth
|
Tue, 26 Nov 2019 18:02:48 +0100 |
ideenmodellierer |
Move Constants and libm to start of firmware ROM block:
ImproveBluetooth
|
Mon, 02 Dec 2019 07:56:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
|
Sun, 01 Dec 2019 17:28:35 +0100 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
Sun, 01 Dec 2019 17:12:27 +0100 |
Jan Mulder |
Added tag v1.5.1 release for changeset afa55a50cc72
maintain-1
|
Sun, 24 Nov 2019 15:46:58 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
|
Mon, 21 Oct 2019 21:16:53 +0200 |
ideenmodellierer |
Added key direction awarness to t3, t5 and t6 views:
MotionDetection
|
Mon, 21 Oct 2019 18:37:43 +0200 |
ideenmodellierer |
Finetune parameter for detection of small sectors as used for the pitch detection
MotionDetection
|
Thu, 17 Oct 2019 23:09:17 +0200 |
ideenmodellierer |
Consider number of available t3 views in sector handling:
MotionDetection
|
Thu, 17 Oct 2019 21:15:42 +0200 |
ideenmodellierer |
Combine variables in a structure to improve readability of code
MotionDetection
|
Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
Thu, 10 Oct 2019 22:11:59 +0200 |
ideenmodellierer |
Simplified pitch detection state machine:
MotionDetection
|
Thu, 10 Oct 2019 22:09:52 +0200 |
ideenmodellierer |
Minor code cleanup
MotionDetection
|
Mon, 16 Sep 2019 22:49:34 +0200 |
ideenmodellierer |
Added missing customerview selection
MotionDetection
|
Mon, 16 Sep 2019 22:46:24 +0200 |
ideenmodellierer |
Incremented "idle window" for scroll detection
MotionDetection
|
Mon, 16 Sep 2019 20:57:40 +0200 |
ideenmodellierer |
Motion events effect custom view in dive mode only
MotionDetection
|
Mon, 16 Sep 2019 20:21:06 +0200 |
ideenmodellierer |
Added string for Empty/ Debug custom view selection
MotionDetection
|
Tue, 10 Sep 2019 20:51:55 +0200 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
Sun, 08 Sep 2019 13:45:43 +0200 |
ideenmodellierer |
Removed some warnings
MotionDetection
|
Sun, 08 Sep 2019 13:45:17 +0200 |
ideenmodellierer |
Add scroll event by pitch angle detection:
MotionDetection
|