| Mon, 10 Aug 2020 15:53:45 +0200 |
heinrichsweikamp |
Added tag v1.5.4 release for changeset e9ca66ce36e5
|
| Wed, 22 Jul 2020 11:55:53 +0200 |
heinrichsweikamp |
1.5.4 release
v1.5.4 release
|
| Mon, 29 Jun 2020 16:18:17 +0200 |
heinrichsweikamp |
add wiki sub-directory
|
| Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
| Tue, 26 May 2020 19:27:07 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
|
| Tue, 26 May 2020 21:13:12 +0200 |
ideenmodellierer |
Bugfix header EEPROM layout:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:13:00 +0200 |
ideenmodellierer |
Bugfix right alignment of string:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:12:46 +0200 |
ideenmodellierer |
Small corrections layout Divelog page 1:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:12:02 +0200 |
ideenmodellierer |
Development option only read bottledata:
FixLayout_Header_LogView
|
| Tue, 19 May 2020 07:27:18 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
|
| Mon, 18 May 2020 21:51:08 +0200 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
| Wed, 13 May 2020 21:56:35 +0200 |
ideenmodellierer |
Code cleanup pressure plausibility check:
Improve_Button_Sleep
|
| Wed, 13 May 2020 21:27:30 +0200 |
ideenmodellierer |
Bugfix unintended else condition:
Improve_Button_Sleep
|
| Tue, 12 May 2020 23:03:50 +0200 |
ideenmodellierer |
Development option only: Show Pressure update for a short time in the custom field (as warning)
Improve_Button_Sleep
|
| Tue, 12 May 2020 23:03:29 +0200 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:54:19 +0200 |
ideenmodellierer |
Balance value of button responsitivness were not considered during firmware startup:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:52:05 +0200 |
ideenmodellierer |
Changed default values:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:42:52 +0200 |
ideenmodellierer |
Added error detection for reading of ADC values in sleep mode:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:39:18 +0200 |
ideenmodellierer |
Do not signal power on reset in case of a "warm" reset:
Improve_Button_Sleep
|
| Tue, 28 Apr 2020 15:37:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
|
| Wed, 22 Apr 2020 13:08:57 +0200 |
Jan Mulder |
bugfix: implement battery charge percentage in dive header
fix-bat-2
|
| Wed, 15 Apr 2020 07:01:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
|
| Tue, 14 Apr 2020 19:45:34 +0200 |
ideenmodellierer |
Removed no longer needed reset profile function:
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:44:19 +0200 |
ideenmodellierer |
Moved and deactivated analyse sample buffer switch:
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:29:23 +0200 |
ideenmodellierer |
Cmd Get profile: transmit dummy profile if necessary
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:27:04 +0200 |
ideenmodellierer |
Removed invalidate header function because it is no lonnger needed
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:22:56 +0200 |
ideenmodellierer |
Compare profile length from header and sample data to identify valid profiles
Improve_Logtansfer
|
| Mon, 13 Apr 2020 16:00:54 +0200 |
ideenmodellierer |
Added compile switch to handle additional data during raw header request:
Improve_Logtansfer
|
| Sun, 12 Apr 2020 21:02:34 +0200 |
ideenmodellierer |
Added function to transfer sample buffer:
Improve_Logtansfer
|
| Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
| Mon, 30 Mar 2020 13:16:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
|
| Sun, 29 Mar 2020 21:55:00 +0200 |
Ideenmodellierer |
merged default into minor_improvments
minor_improvments
|
| Sun, 29 Mar 2020 21:39:57 +0200 |
ideenmodellierer |
Activated reset of sample information within header data at time of sector erasing:
minor_improvments
|
| Sat, 28 Mar 2020 21:41:47 +0100 |
ideenmodellierer |
Added ppO2 to dummy profile data:
minor_improvments
|
| Tue, 24 Mar 2020 22:32:48 +0100 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
| Tue, 24 Mar 2020 22:14:16 +0100 |
ideenmodellierer |
Transfer a dummy profile in case of missing sample information:
minor_improvments
|
| Tue, 24 Mar 2020 22:12:08 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
| Tue, 24 Mar 2020 22:08:29 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
| Tue, 24 Mar 2020 21:59:38 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
| Tue, 24 Mar 2020 21:59:11 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
| Tue, 24 Mar 2020 21:49:52 +0100 |
ideenmodellierer |
Allocate received bar value to active gas (was static allocated to gas[1])
minor_improvments
|
| Tue, 24 Mar 2020 21:48:27 +0100 |
ideenmodellierer |
Added new compile switches for variants:
minor_improvments
|
| Mon, 23 Mar 2020 21:14:54 +0100 |
ideenmodellierer |
Added initialization of bottle sensor data age counter
minor_improvments
|
| Mon, 23 Mar 2020 21:13:52 +0100 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
| Mon, 23 Mar 2020 21:10:02 +0100 |
ideenmodellierer |
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
minor_improvments
|
| Thu, 05 Mar 2020 22:31:50 +0100 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
| Thu, 05 Mar 2020 22:27:55 +0100 |
ideenmodellierer |
Removed duplicated definition:
minor_improvments
|
| Sat, 29 Feb 2020 22:27:29 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sat, 29 Feb 2020 22:25:20 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sun, 01 Mar 2020 10:06:45 +0100 |
heinrichsweikamp |
fix potential issue with >255 dives in the logbook
|
| Thu, 27 Feb 2020 09:13:25 +0100 |
heinrichsweikamp |
Added tag v1.5.3 release for changeset 5b4c78c36b04
|
| Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
| Mon, 24 Feb 2020 15:17:54 +0100 |
heinrichsweikamp |
update the 1.5.3 for tests
|
| Mon, 24 Feb 2020 07:58:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
|
| Sun, 23 Feb 2020 21:18:49 +0100 |
ideenmodellierer |
Moved power on detection to RTE:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:17:17 +0100 |
ideenmodellierer |
Bugfix display battery voltage in maintainance menu:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:13:28 +0100 |
ideenmodellierer |
Reduced timeout for common UART communication:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:09:56 +0100 |
ideenmodellierer |
Detect startup after power off:
Improve_BatteryGasGauge
|
| Tue, 18 Feb 2020 12:41:45 +0100 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
| Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
| Tue, 18 Feb 2020 07:20:29 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
|
| Mon, 17 Feb 2020 19:43:09 +0100 |
ideenmodellierer |
Marked possible code improvment for future activities:
ImprovmentNVM_2
|
| Mon, 17 Feb 2020 19:04:10 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
| Sun, 16 Feb 2020 22:04:52 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:50:58 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:50:20 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:45:19 +0100 |
ideenmodellierer |
Added (optional) menu item to analyse log sample buffer:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:40:33 +0100 |
ideenmodellierer |
ext_Flash_write_sample erase sector optimization:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:29:12 +0100 |
ideenmodellierer |
Moved Timeout handling out of 100ms callback:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:25:09 +0100 |
ideenmodellierer |
Enable sequentionel writing of device data:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:15:27 +0100 |
ideenmodellierer |
Optimize ef_write_block function:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 08:23:15 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
|
| Fri, 07 Feb 2020 16:38:11 +0100 |
Jan Mulder |
Added tag v1.5.2.beta release for changeset 54a480c43e97
maintain-2
|
| Wed, 15 Jan 2020 13:41:01 +0100 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
| Wed, 15 Jan 2020 10:53:15 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
|
| Tue, 14 Jan 2020 21:52:15 +0100 |
Ideenmodellierer |
merged default into Improvment_NVM
Improment_NVM
|
| Tue, 14 Jan 2020 21:38:45 +0100 |
ideenmodellierer |
Added compile switch for restoring of last known date after power lost:
Improment_NVM
|
| Tue, 14 Jan 2020 21:10:37 +0100 |
ideenmodellierer |
Bugfix Flipdisplay Gauge and Apnoe mode:
Improment_NVM
|
| Tue, 14 Jan 2020 21:08:45 +0100 |
ideenmodellierer |
Bugfix: Warnings displayed in Gauge Mode:
Improment_NVM
|
| Mon, 13 Jan 2020 20:27:57 +0100 |
ideenmodellierer |
Bugfix: Limit log length in case of corrupted sample storage:
Improment_NVM
|
| Sun, 12 Jan 2020 21:33:13 +0100 |
ideenmodellierer |
Bugfix display compass calibration frozen:
Improment_NVM
|
| Sun, 12 Jan 2020 19:55:22 +0100 |
ideenmodellierer |
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter
Improment_NVM
|
| Sun, 12 Jan 2020 19:50:14 +0100 |
ideenmodellierer |
Bugfix invalid voltage / temperatur after coldstart:
Improment_NVM
|
| Sun, 12 Jan 2020 18:06:59 +0100 |
ideenmodellierer |
Bugfix parallel call of external flash functions:
Improment_NVM
|
| Sun, 12 Jan 2020 17:57:11 +0100 |
ideenmodellierer |
Bugfix Min max values for device data checks:
Improment_NVM
|
| Sun, 12 Jan 2020 17:47:02 +0100 |
ideenmodellierer |
Bugfix Display of Sensor values:
Improment_NVM
|
| Sun, 12 Jan 2020 17:45:36 +0100 |
ideenmodellierer |
Bugfix: display of time of minimum voltag:
Improment_NVM
|
| Wed, 08 Jan 2020 15:35:15 +0100 |
heinrichsweikamp |
We got one report of false/freezd depth reading when jumping into 2m depth
|
| Sun, 05 Jan 2020 14:57:50 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
|
| Sun, 29 Dec 2019 09:42:16 +0100 |
Ideenmodellierer |
merged default into ImproveBluetooth
ImproveBluetooth
|
| Sat, 28 Dec 2019 19:42:04 +0100 |
ideenmodellierer |
Added retry through power off/on cycle:
ImproveBluetooth
|
| Sat, 21 Dec 2019 20:21:26 +0100 |
ideenmodellierer |
Revert change to keep connection open in case of BlueMod messages:
ImproveBluetooth
|
| Mon, 02 Dec 2019 22:03:05 +0100 |
ideenmodellierer |
Bugfix: Merge / cleanup problem:
ImproveBluetooth
|
| Sun, 01 Dec 2019 19:55:15 +0100 |
ideenmodellierer |
Added missing enum for configuration states
ImproveBluetooth
|
| Tue, 26 Nov 2019 22:12:25 +0100 |
ideenmodellierer |
Added function for BlueMod configuration:
ImproveBluetooth
|
| Tue, 26 Nov 2019 21:17:57 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
| Tue, 26 Nov 2019 21:16:36 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
| Tue, 26 Nov 2019 21:14:58 +0100 |
ideenmodellierer |
Configurate FlowCntrl Pins as noPull
ImproveBluetooth
|
| Tue, 26 Nov 2019 18:13:26 +0100 |
ideenmodellierer |
Bugfix negativ ascend bar:
ImproveBluetooth
|
| Tue, 26 Nov 2019 18:02:48 +0100 |
ideenmodellierer |
Move Constants and libm to start of firmware ROM block:
ImproveBluetooth
|
| Mon, 02 Dec 2019 07:56:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
|
| Sun, 01 Dec 2019 17:28:35 +0100 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
| Sun, 01 Dec 2019 17:12:27 +0100 |
Jan Mulder |
Added tag v1.5.1 release for changeset afa55a50cc72
maintain-1
|
| Sun, 24 Nov 2019 15:46:58 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
|
| Mon, 21 Oct 2019 21:16:53 +0200 |
ideenmodellierer |
Added key direction awarness to t3, t5 and t6 views:
MotionDetection
|
| Mon, 21 Oct 2019 18:37:43 +0200 |
ideenmodellierer |
Finetune parameter for detection of small sectors as used for the pitch detection
MotionDetection
|
| Thu, 17 Oct 2019 23:09:17 +0200 |
ideenmodellierer |
Consider number of available t3 views in sector handling:
MotionDetection
|
| Thu, 17 Oct 2019 21:15:42 +0200 |
ideenmodellierer |
Combine variables in a structure to improve readability of code
MotionDetection
|
| Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
| Thu, 10 Oct 2019 22:11:59 +0200 |
ideenmodellierer |
Simplified pitch detection state machine:
MotionDetection
|
| Thu, 10 Oct 2019 22:09:52 +0200 |
ideenmodellierer |
Minor code cleanup
MotionDetection
|
| Mon, 16 Sep 2019 22:49:34 +0200 |
ideenmodellierer |
Added missing customerview selection
MotionDetection
|
| Mon, 16 Sep 2019 22:46:24 +0200 |
ideenmodellierer |
Incremented "idle window" for scroll detection
MotionDetection
|
| Mon, 16 Sep 2019 20:57:40 +0200 |
ideenmodellierer |
Motion events effect custom view in dive mode only
MotionDetection
|
| Mon, 16 Sep 2019 20:21:06 +0200 |
ideenmodellierer |
Added string for Empty/ Debug custom view selection
MotionDetection
|
| Tue, 10 Sep 2019 20:51:55 +0200 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
| Sun, 08 Sep 2019 13:45:43 +0200 |
ideenmodellierer |
Removed some warnings
MotionDetection
|
| Sun, 08 Sep 2019 13:45:17 +0200 |
ideenmodellierer |
Add scroll event by pitch angle detection:
MotionDetection
|
| Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
| Mon, 19 Aug 2019 17:39:47 +0200 |
ideenmodellierer |
Added parameter for number of sectors to be defined
MotionDetection
|
| Tue, 13 Aug 2019 21:13:54 +0200 |
ideenmodellierer |
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent
MotionDetection
|
| Tue, 13 Aug 2019 21:12:17 +0200 |
ideenmodellierer |
Added a function to count the active custom views.
MotionDetection
|
| Tue, 13 Aug 2019 21:10:46 +0200 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
| Sat, 20 Jul 2019 21:42:45 +0200 |
Ideenmodellierer |
Merge default
MotionDetection
|
| Mon, 17 Jun 2019 19:56:38 +0200 |
ideenmodellierer |
Fix misalignment of do while loop
MotionDetection
|
| Mon, 17 Jun 2019 19:53:01 +0200 |
ideenmodellierer |
Bugfix: selection of current view not working
MotionDetection
|
| Mon, 17 Jun 2019 19:47:07 +0200 |
ideenmodellierer |
Update call of motion detection function
MotionDetection
|
| Mon, 17 Jun 2019 19:46:18 +0200 |
ideenmodellierer |
Reworked detection function
MotionDetection
|
| Tue, 11 Jun 2019 05:31:07 +0200 |
Ideenmodellierer |
Parameter update
MotionDetection
|
| Tue, 11 Jun 2019 05:30:09 +0200 |
Ideenmodellierer |
Pass action to customer vie update function.
MotionDetection
|
| Fri, 24 May 2019 22:01:46 +0200 |
ideenmodellierer |
Added trigger of middle button action in case of a detected shake
MotionDetection
|
| Fri, 24 May 2019 22:00:38 +0200 |
ideenmodellierer |
Added new files for motion detection (shaking) detection
MotionDetection
|
| Sun, 24 Nov 2019 16:08:29 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
| Sat, 23 Nov 2019 18:39:50 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
| Sat, 23 Nov 2019 15:36:38 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
| Wed, 09 Oct 2019 20:05:47 +0200 |
heinrichsweikamp |
Make a FW 1.5.1 / RTE 2.0 binary for testing
v1.5.1 release
|
| Wed, 09 Oct 2019 07:08:43 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
|
| Tue, 08 Oct 2019 16:41:57 +0200 |
Jan Mulder |
Added tag v1.5.0 release for changeset 143fe85f82a2
fix-merge-mess
|
| Tue, 08 Oct 2019 16:35:45 +0200 |
Jan Mulder |
Fix merge problem
fix-merge-mess
|
| Sun, 06 Oct 2019 14:12:41 +0200 |
heinrichsweikamp |
Merge
|
| Sun, 06 Oct 2019 11:58:36 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
|
| Thu, 03 Oct 2019 21:39:28 +0200 |
ideenmodellierer |
Decrease ManualExitDiveCounter in surface mode
FlightMode_Improvment
|
| Thu, 03 Oct 2019 21:34:52 +0200 |
ideenmodellierer |
Minor changes to debug view
FlightMode_Improvment
|
| Thu, 03 Oct 2019 21:33:47 +0200 |
ideenmodellierer |
Added option to manually leave dive mode to system menu
FlightMode_Improvment
|
| Thu, 03 Oct 2019 21:30:16 +0200 |
ideenmodellierer |
Added function to support manuel exit of dive mode
FlightMode_Improvment
|
| Thu, 03 Oct 2019 21:26:46 +0200 |
ideenmodellierer |
Added function to evaluate the state of the surface pressure history memory
FlightMode_Improvment
|
| Tue, 01 Oct 2019 19:58:58 +0200 |
ideenmodellierer |
Removed not used wireless menu items
FlightMode_Improvment
|
| Tue, 01 Oct 2019 19:43:30 +0200 |
ideenmodellierer |
Added compile switch to enable debug view option in system menu
FlightMode_Improvment
|
| Tue, 01 Oct 2019 19:13:41 +0200 |
ideenmodellierer |
Removed averaging of pressure and temperatur values
FlightMode_Improvment
|
| Sun, 06 Oct 2019 14:07:51 +0200 |
heinrichsweikamp |
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
|
| Mon, 19 Aug 2019 11:42:31 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
|
| Sat, 17 Aug 2019 19:03:47 +0200 |
ideenmodellierer |
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
PressureMeasure_Improvment
|
| Sat, 17 Aug 2019 18:57:15 +0200 |
ideenmodellierer |
Added function to avoid divemode activation during Landing:
PressureMeasure_Improvment
|
| Sat, 17 Aug 2019 18:47:08 +0200 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
| Sat, 17 Aug 2019 18:44:43 +0200 |
ideenmodellierer |
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing)
PressureMeasure_Improvment
|
| Tue, 13 Aug 2019 21:46:26 +0200 |
ideenmodellierer |
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
PressureMeasure_Improvment
|
| Sun, 04 Aug 2019 11:01:06 +0200 |
heinrichsweikamp |
building a 1.5
v1.5.0 release
|
| Sat, 20 Jul 2019 10:44:01 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Thu, 18 Jul 2019 14:26:56 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
|
| Wed, 17 Jul 2019 22:43:51 +0200 |
ideenmodellierer |
Added plausibility check for pressure values
I2C_Improvment
|
| Wed, 17 Jul 2019 22:43:16 +0200 |
ideenmodellierer |
Added check of configuration.
I2C_Improvment
|
| Wed, 17 Jul 2019 22:42:55 +0200 |
ideenmodellierer |
Improved startup robustness
I2C_Improvment
|
| Wed, 17 Jul 2019 22:42:15 +0200 |
ideenmodellierer |
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery
I2C_Improvment
|
| Wed, 17 Jul 2019 22:41:31 +0200 |
ideenmodellierer |
Deactivated internal pullups and I2C interrupt callback
I2C_Improvment
|
| Mon, 01 Jul 2019 14:18:39 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
|
| Thu, 20 Jun 2019 14:24:57 +0200 |
Jan Mulder |
bugfix: implement battery at end in dive header
fix-batt-1
|
| Sun, 30 Jun 2019 22:12:15 +0200 |
heinrichsweikamp |
increase RTE to 1.9 and Firmware to 1.4.9 beta
|
| Sun, 30 Jun 2019 19:52:46 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
|
| Sun, 30 Jun 2019 21:25:58 +0200 |
ideenmodellierer |
Added start of frame detection for HUD data
O2_SensorSync
|
| Sun, 30 Jun 2019 21:18:05 +0200 |
ideenmodellierer |
Moved indication variable for received HUD data to tCCR file.
O2_SensorSync
|
| Wed, 19 Jun 2019 13:12:25 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-version (pull request #27)
|
| Wed, 19 Jun 2019 14:31:50 +0200 |
Jan Mulder |
bugfix: correct packed main version number in dive header
fix-version
|
| Wed, 19 Jun 2019 13:12:01 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
|
| Mon, 17 Jun 2019 21:47:54 +0200 |
ideenmodellierer |
Resolved warning
Bugfix_Flip_FirmwareUpdate
|
| Mon, 17 Jun 2019 21:47:33 +0200 |
ideenmodellierer |
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update
Bugfix_Flip_FirmwareUpdate
|
| Mon, 17 Jun 2019 21:47:19 +0200 |
ideenmodellierer |
Bugfix Overview, O2 values and mV in flip display mode
Bugfix_Flip_FirmwareUpdate
|
| Mon, 17 Jun 2019 21:46:56 +0200 |
ideenmodellierer |
Reinitialize logos after flip of display
Bugfix_Flip_FirmwareUpdate
|
| Sat, 01 Jun 2019 10:12:15 +0200 |
heinrichsweikamp |
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
|
| Fri, 31 May 2019 06:22:50 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
|
| Wed, 29 May 2019 14:02:27 +0200 |
Jan Mulder |
bugfix: make stopwatch and divetime run in sync
cleanup-4
|
| Sun, 26 May 2019 10:09:22 +0200 |
Jan Mulder |
Make dive mode detection more advanced
cleanup-4
|
| Fri, 24 May 2019 09:29:29 +0200 |
Jan Mulder |
cleanup: factor out SHelper typedef (and more)
cleanup-4
|
| Fri, 24 May 2019 09:02:46 +0200 |
Jan Mulder |
cleanup: introduce function setAvgDepth
cleanup-4
|
| Wed, 22 May 2019 22:22:15 +0200 |
Jan Mulder |
cleanup: factor out unused stopwatch code
cleanup-4
|
| Wed, 22 May 2019 14:39:04 +0200 |
Jan Mulder |
bugfix, cleanup: do not clip depth to 0
cleanup-4
|
| Tue, 21 May 2019 11:11:05 +0200 |
Jan Mulder |
bugfix, consistency: show deco/NDL really after 1 minute divetime
cleanup-4
|
| Mon, 20 May 2019 13:06:02 +0200 |
Jan Mulder |
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime
cleanup-4
|
| Mon, 20 May 2019 12:57:31 +0200 |
Jan Mulder |
bugfix, cleanup: simplify stopwatch logic and fix fallout
cleanup-4
|
| Mon, 20 May 2019 10:13:44 +0200 |
Jan Mulder |
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync
cleanup-4
|
| Mon, 20 May 2019 10:05:27 +0200 |
Jan Mulder |
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level
cleanup-4
|
| Fri, 17 May 2019 21:19:04 +0200 |
Jan Mulder |
cleanup: remove commented/unused code, make static
cleanup-4
|
| Fri, 17 May 2019 06:38:56 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
|
| Thu, 16 May 2019 14:02:46 +0200 |
Jan Mulder |
Bugfix: fix drawing of CCR bailout profile
cleanup-3
|
| Thu, 16 May 2019 08:56:15 +0200 |
Jan Mulder |
cleanup: remove unused code, make static, remove commented code
cleanup-3
|
| Thu, 16 May 2019 08:54:33 +0200 |
Jan Mulder |
Possible bugfix: do not use bitwise and (&)
cleanup-3
|
| Mon, 13 May 2019 13:37:34 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
|
| Sun, 12 May 2019 09:45:32 +0200 |
Jan Mulder |
Added tag v1.4.8 release for changeset ba9d99a2e310
div-fixes-6
|
| Thu, 02 May 2019 10:05:28 +0200 |
Jan Mulder |
bugfix, consistency: show deco, NDL after 1 minute
div-fixes-6
|
| Thu, 02 May 2019 09:24:54 +0200 |
Jan Mulder |
translate: nullzeit -> ndl
div-fixes-6
|
| Thu, 02 May 2019 09:16:07 +0200 |
Jan Mulder |
Deco Models: limit NDL to 240 minutes
div-fixes-6
|
| Thu, 02 May 2019 08:43:07 +0200 |
Jan Mulder |
VPM, cleanup: 1st round
div-fixes-6
|
| Mon, 29 Apr 2019 19:45:25 +0200 |
Jan Mulder |
cleanup: remove unused code
div-fixes-6
|
| Mon, 29 Apr 2019 19:43:05 +0200 |
Jan Mulder |
cleanup: no useless checks for simulator state
div-fixes-6
|
| Mon, 06 May 2019 15:45:19 +0200 |
heinrichsweikamp |
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware.
v1.4.8 release
|
| Mon, 06 May 2019 09:00:58 +0200 |
heinrichsweikamp |
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
|
| Sun, 05 May 2019 11:06:02 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Thu, 02 May 2019 11:12:25 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
|
| Thu, 02 May 2019 13:08:17 +0200 |
Jan Mulder |
Bugfix: write NDL in logbook correctly
ndl-in-logbook
|
| Wed, 01 May 2019 14:45:47 +0200 |
heinrichsweikamp |
translate some comments into english
|
| Wed, 01 May 2019 14:39:46 +0200 |
heinrichsweikamp |
Fix typos (There are still many...)
|
| Mon, 29 Apr 2019 19:25:24 +0200 |
heinrichsweikamp |
Make RTE show as 1.8.0 beta, add update files for testing purposes
|
| Sun, 28 Apr 2019 17:57:39 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Sun, 28 Apr 2019 15:54:46 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
|
| Sun, 28 Apr 2019 10:16:38 +0200 |
ideenmodellierer |
Rework SPI error handling.
IPC_Sync_Improvment_3
|
| Sun, 28 Apr 2019 10:06:27 +0200 |
ideenmodellierer |
Rework pressure/ temperature data aquisition
IPC_Sync_Improvment_3
|
| Sun, 28 Apr 2019 09:54:43 +0200 |
ideenmodellierer |
Do not mark data as valid if devicedata is received.
IPC_Sync_Improvment_3
|
| Sun, 28 Apr 2019 09:41:43 +0200 |
heinrichsweikamp |
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
|
| Sun, 28 Apr 2019 07:05:23 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/write-from-sim (pull request #20)
|
| Sat, 27 Apr 2019 12:27:46 +0200 |
Jan Mulder |
cleanup: simplify stateUsed usage
write-from-sim
|
| Sat, 27 Apr 2019 09:32:16 +0200 |
Jan Mulder |
cleanup: also write gas and setpoint changes in simulator mode
write-from-sim
|
| Wed, 24 Apr 2019 17:10:51 +0200 |
Jan Mulder |
feature, debug: make simulator write a logbook entry
write-from-sim
|
| Tue, 23 Apr 2019 21:03:24 +0200 |
Jan Mulder |
cleanup: do not pass large struct by value
write-from-sim
|
| Tue, 23 Apr 2019 17:41:20 +0200 |
Jan Mulder |
cleanup: make things static where possible.
write-from-sim
|
| Fri, 26 Apr 2019 10:36:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
|
| Sun, 14 Apr 2019 14:27:32 +0200 |
ideenmodellierer |
Added batch to copy bins from release folder
IPC_Sync_Improvment_2
|
| Sun, 14 Apr 2019 14:22:41 +0200 |
ideenmodellierer |
Increase SPI com timeout for cold start and wake up
IPC_Sync_Improvment_2
|
| Sun, 14 Apr 2019 11:43:29 +0200 |
ideenmodellierer |
Sync to Main 100ms time stamp & added Reinitialization of globals after startup
IPC_Sync_Improvment_2
|
| Sun, 14 Apr 2019 11:38:14 +0200 |
ideenmodellierer |
Forward 100ms time stamp to RTE and handle logbook in main loop
IPC_Sync_Improvment_2
|
| Tue, 23 Apr 2019 14:21:32 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-3 (pull request #19)
|
| Tue, 23 Apr 2019 13:05:20 +0200 |
Jan Mulder |
Bugfix: do not reset saturation on surfacing
bm-3
|
| Tue, 23 Apr 2019 09:25:18 +0200 |
Jan Mulder |
Added tag V1.4.7 release for changeset 1b9be6040d82
bm-3
|
| Mon, 15 Apr 2019 17:35:47 +0200 |
Jan Mulder |
feature: allow new saturation to be set in lower left corner
bm-3
|
| Fri, 12 Apr 2019 22:00:07 +0200 |
Jan Mulder |
Buehlmann: factor out another global gDecotable
bm-3
|
| Fri, 12 Apr 2019 21:04:52 +0200 |
Jan Mulder |
Buehlmann: factor out gNDL and gTTS
bm-3
|
| Fri, 12 Apr 2019 19:05:49 +0200 |
Jan Mulder |
Buehlmann: trivial performance improvement (NDL)
bm-3
|
| Fri, 12 Apr 2019 15:26:14 +0200 |
Jan Mulder |
Buehlmann: cleanup, factor out pBuDiveSettings
bm-3
|
| Fri, 12 Apr 2019 14:46:48 +0200 |
Jan Mulder |
Buehlmann: cleanup, remove global pDecolistBuehlmann
bm-3
|
| Fri, 12 Apr 2019 10:43:52 +0200 |
Jan Mulder |
Buehlmann: cleanup, whitespace, static
bm-3
|
| Sat, 13 Apr 2019 14:36:33 +0200 |
heinrichsweikamp |
Minor: Typo fixed in bootloader screen
V1.4.7 release
|
| Fri, 12 Apr 2019 07:22:14 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-2 (pull request #17)
|
| Thu, 11 Apr 2019 17:48:48 +0200 |
Jan Mulder |
Buelmann: new implementation for ceiling
bm-2
|
| Thu, 11 Apr 2019 10:26:22 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-1 (pull request #16)
|
| Wed, 10 Apr 2019 17:55:46 +0200 |
Jan Mulder |
Fix stupid commit error
bm-1
|
| Tue, 09 Apr 2019 16:30:21 +0200 |
Jan Mulder |
feature: Relative GF to Saturation renames
bm-1
|
| Tue, 09 Apr 2019 15:38:31 +0200 |
Jan Mulder |
feature: replace Relative GF by saturation, computational only
bm-1
|
| Wed, 10 Apr 2019 11:04:56 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Tue, 09 Apr 2019 08:52:44 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
|
| Mon, 08 Apr 2019 12:35:59 +0200 |
Jan Mulder |
debug: add SPI error counter to compass calibration
div-fixes-5
|
| Mon, 08 Apr 2019 12:02:07 +0200 |
Jan Mulder |
Comply to datasheet when resetting battery gauge registers
div-fixes-5
|
| Mon, 08 Apr 2019 11:18:40 +0200 |
Jan Mulder |
cleanup: factor out I2C1_Status() and cleanup type
div-fixes-5
|
| Mon, 08 Apr 2019 11:49:13 +0200 |
Jan Mulder |
Improvement SPI stability/recoverability
div-fixes-5
|
| Mon, 08 Apr 2019 10:35:29 +0200 |
Jan Mulder |
cleanup: factor out dataSendToSlaveStopEval
div-fixes-5
|
| Mon, 08 Apr 2019 10:16:17 +0200 |
Jan Mulder |
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
div-fixes-5
|
| Sat, 06 Apr 2019 20:35:21 +0200 |
Jan Mulder |
Bugfix: do not show NDL in bigscreen mode when zero
div-fixes-5
|
| Sat, 06 Apr 2019 09:41:14 +0200 |
heinrichsweikamp |
Minor: translating some comments and variable names into english, some cleanup in tComm.c
|
| Sat, 06 Apr 2019 09:11:39 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Sat, 06 Apr 2019 07:01:21 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
|
| Fri, 05 Apr 2019 09:12:04 +0200 |
Jan Mulder |
cleanup, bugfix: do not exit simulator on 5h dive time
div-fixes-4-1
|
| Wed, 03 Apr 2019 21:11:56 +0200 |
Jan Mulder |
Bugfix: make date/time setting work over reboots
div-fixes-4-1
|
| Wed, 03 Apr 2019 14:33:12 +0200 |
Jan Mulder |
cleanup: do not re-implement a standard function
div-fixes-4-1
|
| Wed, 03 Apr 2019 14:16:59 +0200 |
Jan Mulder |
cleanup: make return void when never used
div-fixes-4-1
|
| Tue, 02 Apr 2019 15:11:42 +0200 |
Jan Mulder |
cleanup: fix recent extra compiler warnings
div-fixes-4-1
|
| Tue, 02 Apr 2019 14:53:15 +0200 |
Jan Mulder |
Bugfix: set battery percentage correctly after RTE update
div-fixes-4-1
|
| Tue, 02 Apr 2019 18:18:22 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
| Mon, 01 Apr 2019 19:19:04 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
|
| Mon, 01 Apr 2019 15:50:41 +0200 |
Jan Mulder |
cleanup: random set of cleanups
div-fixes-3
|
| Sun, 31 Mar 2019 19:35:51 +0200 |
Jan Mulder |
Bugfix, deco: fix 2 (small) problems with calculated ceiling
div-fixes-3
|
| Sun, 31 Mar 2019 15:14:06 +0200 |
Jan Mulder |
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
div-fixes-3
|
| Fri, 29 Mar 2019 14:00:43 +0100 |
Jan Mulder |
Bugfix: correct presentation error in tissues custom view
div-fixes-3
|
| Mon, 01 Apr 2019 09:01:09 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
|
| Sun, 31 Mar 2019 15:49:47 +0200 |
ideenmodellierer |
Added schedule point for functions executed once in a second
Improve_IPC_Sync
|
| Sun, 31 Mar 2019 15:44:56 +0200 |
ideenmodellierer |
Resolved some minor warnings
Improve_IPC_Sync
|
| Sun, 31 Mar 2019 15:44:12 +0200 |
ideenmodellierer |
Splitted 120 seconds UART timeout into chunks of 500ms
Improve_IPC_Sync
|
| Sun, 31 Mar 2019 15:39:44 +0200 |
ideenmodellierer |
Moved display refresh and button action function from tim callback to main loop
Improve_IPC_Sync
|
| Thu, 28 Mar 2019 13:05:29 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/edit-fix (pull request #11)
|
| Thu, 28 Mar 2019 09:54:29 +0100 |
Jan Mulder |
Bugfix, trivial: correctly present avg depth in overview custom
edit-fix
|
| Thu, 28 Mar 2019 08:26:17 +0100 |
Jan Mulder |
Bugfix: handle rounding of TTS and future TTS consistently
edit-fix
|
| Wed, 27 Mar 2019 15:12:26 +0100 |
Jan Mulder |
Bugfix, trivial: do not visit 9 on first digit for setpoint
edit-fix
|
| Tue, 26 Mar 2019 22:23:26 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cv-persistent (pull request #10)
|
| Tue, 26 Mar 2019 16:02:22 +0100 |
Jan Mulder |
New feature: do not show sensor customviews when no sensors attached
cv-persistent
|
| Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
| Sun, 24 Mar 2019 22:09:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
|
| Sun, 24 Mar 2019 22:57:28 +0100 |
ideenmodellierer |
Update SPI error display and handling
ImprovmentSPI
|
| Sun, 24 Mar 2019 22:53:17 +0100 |
ideenmodellierer |
Introduce scheduler function
ImprovmentSPI
|
| Sun, 24 Mar 2019 22:51:15 +0100 |
ideenmodellierer |
Moved EvaluateButton into 100ms callback
ImprovmentSPI
|
| Sun, 24 Mar 2019 22:48:49 +0100 |
ideenmodellierer |
Deleted duplicated header file (keep the one stored in common)
ImprovmentSPI
|
| Sat, 23 Mar 2019 21:35:29 +0100 |
ideenmodellierer |
Starting 'ImprovmentSPI' branch
ImprovmentSPI
|
| Sat, 23 Mar 2019 21:32:16 +0100 |
Ideenmodellierer |
merge fork
|
| Sun, 17 Mar 2019 19:16:59 +0100 |
Thorsten |
Merged heinrichsweikamp/ostc4 into default
|
| Sat, 16 Mar 2019 19:58:52 +0000 |
Thorsten |
Merged Cleanup_Compass_Wireless into default
|
| Fri, 22 Mar 2019 08:15:30 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
|
| Fri, 22 Mar 2019 08:36:39 +0100 |
Jan Mulder |
Bugfix: fix initial CNS data in the logbook header
div-fixes-cleaup-2
|
| Thu, 21 Mar 2019 15:28:47 +0100 |
Jan Mulder |
cleanup: another cleanup session (data_exchange_main.c)
div-fixes-cleaup-2
|
| Thu, 21 Mar 2019 11:41:59 +0100 |
Jan Mulder |
cleanup: fix (harmless) use before assign
div-fixes-cleaup-2
|
| Wed, 20 Mar 2019 16:24:10 +0100 |
Jan Mulder |
Bugfix, minor: color the overview customview correctly
div-fixes-cleaup-2
|
| Tue, 19 Mar 2019 15:43:38 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
|
| Tue, 19 Mar 2019 11:42:00 +0100 |
Jan Mulder |
cleanup: more trivial cleanup (logbook.c/h)
div-fixes-cleanup-1
|
| Sat, 16 Mar 2019 21:52:06 +0100 |
Jan Mulder |
Bugfix: show proper dive mode
div-fixes-cleanup-1
|
| Sat, 16 Mar 2019 21:08:18 +0100 |
Jan Mulder |
cleanup: fix compiler warning
div-fixes-cleanup-1
|
| Sat, 16 Mar 2019 21:02:10 +0100 |
Jan Mulder |
cleanup: remove unused include file t9.h
div-fixes-cleanup-1
|
| Fri, 15 Mar 2019 15:48:53 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/avg-temp (pull request #6)
|
| Fri, 15 Mar 2019 15:04:57 +0100 |
Jan Mulder |
Bugfix: average temperature on arrival from RTE instead of display time
avg-temp
|
| Fri, 15 Mar 2019 12:55:58 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
|
| Fri, 15 Mar 2019 12:53:14 +0100 |
Jan Mulder |
cleanup: forgotten cleanup from 9da7dd50e2ec
cleanup-2
|
| Fri, 15 Mar 2019 12:39:28 +0100 |
Jan Mulder |
cleanup: remove obsolete code, make static, etc.
cleanup-2
|
| Fri, 15 Mar 2019 08:22:16 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
|
| Thu, 14 Mar 2019 20:44:23 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
| Thu, 14 Mar 2019 20:44:03 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
| Thu, 14 Mar 2019 20:43:47 +0100 |
ideenmodellierer |
Resolve fixme comments
Cleanup_Compass_Wireless
|
| Wed, 13 Mar 2019 21:51:25 +0100 |
ideenmodellierer |
Removed not suppoted wireless feature
Cleanup_Compass_Wireless
|
| Wed, 13 Mar 2019 21:49:25 +0100 |
ideenmodellierer |
Removed not used compass code
Cleanup_Compass_Wireless
|
| Wed, 13 Mar 2019 20:53:05 +0100 |
ideenmodellierer |
Starting 'Cleanup_Compass_Wireless' branch
Cleanup_Compass_Wireless
|
| Wed, 13 Mar 2019 20:51:50 +0100 |
heinrichsweikamp |
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
|
| Tue, 12 Mar 2019 15:04:19 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/max-depth (pull request #3)
|
| Mon, 11 Mar 2019 20:20:17 +0100 |
Jan Mulder |
cleanup: do not assign to same
max-depth
|
| Mon, 11 Mar 2019 19:57:51 +0100 |
Jan Mulder |
cleanup: remove unused code
max-depth
|
| Mon, 11 Mar 2019 19:54:20 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 2)
max-depth
|
| Mon, 11 Mar 2019 19:48:57 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 1)
max-depth
|
| Sun, 10 Mar 2019 20:30:42 +0100 |
heinrichsweikamp |
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
|
| Sun, 10 Mar 2019 15:39:55 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
|
| Sun, 10 Mar 2019 10:46:48 +0100 |
Jan Mulder |
Fix accidentally pushed local code
cleanup-1
|
| Sun, 10 Mar 2019 10:09:58 +0100 |
Jan Mulder |
Bugfix: highlight the menu underline correctly on selected state
cleanup-1
|
| Fri, 08 Mar 2019 19:26:36 +0000 |
Jan Mulder |
Close branch linux-build.
linux-build
|
| Fri, 08 Mar 2019 13:47:52 +0100 |
Jan Mulder |
cleanup: local data and functions can be static (tMenu)
cleanup-1
|
| Thu, 07 Mar 2019 21:52:23 +0100 |
Jan Mulder |
cleanup: get rid of some compile warnings
cleanup-1
|
| Fri, 08 Mar 2019 10:31:32 +0100 |
heinrichsweikamp |
Minor: Some documentation for new hardware
|
| Thu, 07 Mar 2019 14:15:33 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/linux-build (pull request #1)
|
| Thu, 21 Feb 2019 16:56:08 +0100 |
Jan Mulder |
Add Linux pack script
linux-build
|
| Thu, 21 Feb 2019 10:29:26 +0100 |
Jan Mulder |
OSTC4pack_V4: do not hard code output filename for fonts
linux-build
|
| Thu, 21 Feb 2019 10:01:36 +0100 |
Jan Mulder |
Add missing file for self build pack tools
linux-build
|
| Thu, 07 Mar 2019 15:06:43 +0100 |
heinrichsweikamp |
Merge with FlipDisplay
|
| Sun, 03 Mar 2019 21:13:31 +0100 |
Ideenmodellierer |
Fix for flipped display
FlipDisplay
|
| Sun, 03 Mar 2019 21:12:06 +0100 |
Ideenmodellierer |
Bugfix button translation
FlipDisplay
|
| Sun, 03 Mar 2019 19:20:18 +0100 |
Ideenmodellierer |
Binaries for beta testing
FlipDisplay
|
| Sun, 03 Mar 2019 19:18:51 +0100 |
Ideenmodellierer |
Removed special indicator for DMA transfer error
FlipDisplay
|
| Sun, 03 Mar 2019 17:46:50 +0100 |
Ideenmodellierer |
Do hard sync after communication timeout > 1 second
FlipDisplay
|
| Sun, 03 Mar 2019 17:45:39 +0100 |
Ideenmodellierer |
Keep NSS low during SPI transfer only
FlipDisplay
|
| Sun, 03 Mar 2019 12:19:47 +0100 |
Ideenmodellierer |
Added definitions for SPI sequence counter
FlipDisplay
|
| Sun, 03 Mar 2019 12:18:44 +0100 |
Ideenmodellierer |
Moved button evaluation out of interrupt handler
FlipDisplay
|
| Sun, 03 Mar 2019 12:16:54 +0100 |
Ideenmodellierer |
Bugfix ButtonResponsiveness
FlipDisplay
|
| Sat, 02 Mar 2019 17:42:51 +0100 |
Ideenmodellierer |
Place CNS and pressure within the screen (avoid clipping)
FlipDisplay
|
| Sat, 02 Mar 2019 17:42:06 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
| Sat, 02 Mar 2019 17:01:06 +0100 |
Ideenmodellierer |
Use SPI TX callback to synchronize to main CPU
FlipDisplay
|
| Sat, 02 Mar 2019 16:57:59 +0100 |
Ideenmodellierer |
Forward compass data during calibration mode
FlipDisplay
|
| Sat, 02 Mar 2019 16:56:58 +0100 |
Ideenmodellierer |
RTE Version 1.7 needed because of protocoll and baud rate change
FlipDisplay
|
| Thu, 28 Feb 2019 20:05:51 +0100 |
Ideenmodellierer |
Adjust voltage location
FlipDisplay
|
| Thu, 28 Feb 2019 20:05:17 +0100 |
Ideenmodellierer |
Use one global structure for schedule data
FlipDisplay
|
| Thu, 28 Feb 2019 19:38:36 +0100 |
Ideenmodellierer |
Introduced Token for SPI data exchange
FlipDisplay
|
| Thu, 28 Feb 2019 19:34:08 +0100 |
Ideenmodellierer |
Use one global structure for all schedule counters
FlipDisplay
|
| Thu, 28 Feb 2019 19:07:10 +0100 |
Ideenmodellierer |
Only use data if data frame is valid
FlipDisplay
|
| Thu, 28 Feb 2019 19:03:29 +0100 |
Ideenmodellierer |
Increase prescalar => frame takes about 4ms.
FlipDisplay
|
| Thu, 28 Feb 2019 19:02:34 +0100 |
Ideenmodellierer |
Get version from local memory instead from incoming data
FlipDisplay
|
| Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
| Tue, 19 Feb 2019 21:48:32 +0100 |
Ideenmodellierer |
Only copy data if data connection to RTE is valid
FlipDisplay
|
| Tue, 19 Feb 2019 18:20:45 +0100 |
Ideenmodellierer |
Introduces abort of communication in case of a out of sync DMA transfer
FlipDisplay
|
| Tue, 19 Feb 2019 18:18:37 +0100 |
Ideenmodellierer |
Restore old data copy locations
FlipDisplay
|
| Tue, 19 Feb 2019 18:16:59 +0100 |
Ideenmodellierer |
Removed cyclic (by timer) send on slave side
FlipDisplay
|
| Tue, 19 Feb 2019 18:15:35 +0100 |
Ideenmodellierer |
Intoduced transfer abort function for data exchange recovery
FlipDisplay
|
| Tue, 19 Feb 2019 18:13:18 +0100 |
Ideenmodellierer |
Add compile switch to disable optimization for specific function
FlipDisplay
|
| Sun, 17 Feb 2019 21:29:38 +0100 |
Ideenmodellierer |
Update of configuration and projectfiles to support new library folder structure
FlipDisplay
|
| Sun, 17 Feb 2019 21:22:13 +0100 |
Ideenmodellierer |
Minor changes to improved code quality and to eliminate warnings
FlipDisplay
|
| Sun, 17 Feb 2019 21:14:09 +0100 |
Ideenmodellierer |
Added function to initialise structures with the actual ambient pressure
FlipDisplay
|
| Sun, 17 Feb 2019 21:12:22 +0100 |
Ideenmodellierer |
Added current STM32 standandard libraries in version independend folder structure
FlipDisplay
|
| Sun, 17 Feb 2019 21:07:35 +0100 |
Ideenmodellierer |
Drop old STM32 standard librarey files
FlipDisplay
|
| Sun, 03 Feb 2019 10:04:27 +0100 |
heinrichsweikamp |
build files
kittz
|
| Sun, 27 Jan 2019 22:21:01 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
| Sun, 27 Jan 2019 22:17:16 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
| Sun, 27 Jan 2019 22:01:07 +0100 |
Ideenmodellierer |
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings)
FlipDisplay
|
| Sun, 13 Jan 2019 18:59:53 +0100 |
Ideenmodellierer |
Take care for display orientation if deleting lines
FlipDisplay
|
| Sun, 13 Jan 2019 18:58:23 +0100 |
Ideenmodellierer |
Use 32bit operations for buffer fills
FlipDisplay
|
| Tue, 08 Jan 2019 22:31:17 +0100 |
Ideenmodellierer |
Cleanup warning and disable printf calls
FlipDisplay
|
| Sun, 06 Jan 2019 22:33:26 +0100 |
Ideenmodellierer |
Cleanup writechar pointers
FlipDisplay
|
| Sun, 06 Jan 2019 22:31:45 +0100 |
Ideenmodellierer |
Enlarge text limits to get string displayed completly
FlipDisplay
|
| Sun, 06 Jan 2019 22:30:35 +0100 |
Ideenmodellierer |
Submenus may have 6 items
FlipDisplay
|
| Sun, 06 Jan 2019 22:27:46 +0100 |
Ideenmodellierer |
Added small helper for runtime evaluation
FlipDisplay
|
| Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
| Thu, 03 Jan 2019 18:35:11 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
| Tue, 01 Jan 2019 21:04:01 +0100 |
Ideenmodellierer |
Binaries of development snapshot
FlipDisplay
|
| Tue, 01 Jan 2019 21:03:33 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
| Tue, 01 Jan 2019 21:03:10 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
| Tue, 01 Jan 2019 21:02:17 +0100 |
Ideenmodellierer |
Added option to handled mirrored display to existing functions
FlipDisplay
|
| Tue, 01 Jan 2019 21:00:55 +0100 |
Ideenmodellierer |
Consider computer heading in case of a flipped display
FlipDisplay
|
| Tue, 01 Jan 2019 21:00:13 +0100 |
Ideenmodellierer |
Flip key assigment if needed
FlipDisplay
|
| Tue, 01 Jan 2019 20:59:36 +0100 |
Ideenmodellierer |
Next text ID for display flip
FlipDisplay
|
| Tue, 01 Jan 2019 20:57:41 +0100 |
Ideenmodellierer |
Starting 'FlipDisplay' branch
FlipDisplay
|
| Mon, 24 Dec 2018 16:19:09 +0300 |
Dmitry Romanov |
fix comments
kittz
|
| Mon, 24 Dec 2018 16:15:02 +0300 |
Dmitry Romanov |
Tested and alive.
kittz
|
| Wed, 28 Nov 2018 09:36:33 +0300 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
| Tue, 27 Nov 2018 18:31:21 +0100 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
| Tue, 27 Nov 2018 13:18:59 +0300 |
Dmitry Romanov |
globals
kittz
|
| Tue, 27 Nov 2018 12:59:56 +0300 |
Dmitry Romanov |
Stable.fix.
kittz
|
| Mon, 26 Nov 2018 15:25:52 +0300 |
Dmitry Romanov |
Config for debug data
kittz
|
| Mon, 26 Nov 2018 13:58:51 +0300 |
Dmitry Romanov |
+2ms delay
kittz
|
| Mon, 26 Nov 2018 13:49:02 +0300 |
Dmitry Romanov |
fix comments
kittz
|
| Mon, 26 Nov 2018 13:45:14 +0300 |
Dmitry Romanov |
Sorry. Now.
kittz
|
| Mon, 26 Nov 2018 13:42:38 +0300 |
Dmitry Romanov |
Debounce. Bounced buttons fixed.
kittz
|
| Mon, 26 Nov 2018 12:20:31 +0300 |
Dmitry Romanov |
reduce i2c speed and dutycycle for compass stability
kittz
|
| Mon, 26 Nov 2018 11:38:06 +0300 |
Dmitry Romanov |
a bit of
kittz
|
| Mon, 26 Nov 2018 10:50:39 +0300 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
| Mon, 26 Nov 2018 10:13:02 +0300 |
Dmitry Romanov |
First stable. With minimal button sensitivity fix(for broken buttons)
kittz
|
| Fri, 23 Nov 2018 18:14:56 +0300 |
Dmitry Romanov |
+- stable
kittz
|
| Fri, 23 Nov 2018 16:52:21 +0300 |
Dmitry Romanov |
temp! full cyclic SPI
kittz
|
| Thu, 22 Nov 2018 12:02:55 +0300 |
Dmitry Romanov |
revert
kittz
|
| Wed, 21 Nov 2018 13:57:58 +0300 |
Dmitry Romanov |
tmp
kittz
|
| Wed, 21 Nov 2018 13:12:44 +0300 |
Dmitry Romanov |
fix time&date after wakeup
kittz
|
| Wed, 21 Nov 2018 12:49:54 +0300 |
Dmitry Romanov |
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ
kittz
|
| Wed, 21 Nov 2018 10:25:15 +0300 |
Dmitry Romanov |
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
kittz
|
| Tue, 20 Nov 2018 12:27:40 +0300 |
Dmitry Romanov |
???????
kittz
|
| Tue, 20 Nov 2018 12:08:19 +0300 |
Dmitry Romanov |
+i2c analog noise filtering
kittz
|
| Tue, 20 Nov 2018 09:25:17 +0000 |
Dmitry Romanov |
Created new branch kittz
kittz
|
| Sat, 06 Oct 2018 15:02:11 +0200 |
heinrichsweikamp |
Added Spanish language
|
| Thu, 04 Oct 2018 20:49:47 +0200 |
Ideenmodellierer |
Added Fontpack reference project
|
| Thu, 04 Oct 2018 20:45:12 +0200 |
Ideenmodellierer |
Added script to pack FontPack
|
| Thu, 04 Oct 2018 20:44:19 +0200 |
Ideenmodellierer |
Starting Firmware 1.4 the fontpack version 1.0 is needed
|
| Thu, 04 Oct 2018 20:42:56 +0200 |
Ideenmodellierer |
Update Fontpack code to support font moved to upper memory
|
| Thu, 04 Oct 2018 20:41:21 +0200 |
Ideenmodellierer |
Update version info
|
| Thu, 04 Oct 2018 20:40:53 +0200 |
Ideenmodellierer |
Move font to upper memory
|
| Thu, 04 Oct 2018 20:40:21 +0200 |
Ideenmodellierer |
Add definitions for Fonts to be placed in upper flash
|
| Tue, 11 Sep 2018 22:16:05 +0200 |
heinrichsweikamp |
Merge
|
| Wed, 05 Sep 2018 10:41:48 +0200 |
heinrichsweikamp |
remove wiki files from repo
|
| Tue, 11 Sep 2018 19:29:58 +0200 |
heinrichsweikamp |
old (and new) compass support
|
| Thu, 30 Aug 2018 21:48:21 +0200 |
heinrichsweikamp |
1.3.8 forum release
|
| Wed, 22 Aug 2018 18:54:01 +0200 |
Ideenmodellierer |
Update image size for 'F'ahrenheit
|
| Wed, 22 Aug 2018 11:35:05 +0200 |
Ideenmodellierer |
Bugfix: FutureTTS and Fahrenheit not displayed correct
|
| Wed, 15 Aug 2018 12:16:23 +0200 |
heinrichsweikamp |
language updates
|
| Tue, 14 Aug 2018 13:53:43 +0200 |
heinrichsweikamp |
language updates
|
| Tue, 14 Aug 2018 12:43:58 +0200 |
heinrichsweikamp |
typo in info menu...
|
| Mon, 13 Aug 2018 19:11:14 +0200 |
Ideenmodellierer |
Replaced wait loop with delay fct
|
| Sun, 12 Aug 2018 23:02:13 +0200 |
Ideenmodellierer |
Bugfix font elements (ue missing)
|
| Sat, 11 Aug 2018 13:57:47 +0200 |
heinrichsweikamp |
rename update batch file
|
| Fri, 10 Aug 2018 19:40:55 +0200 |
heinrichsweikamp |
more language updates
|
| Fri, 10 Aug 2018 19:22:12 +0200 |
heinrichsweikamp |
language updates
|
| Thu, 09 Aug 2018 22:39:15 +0200 |
Ideenmodellierer |
Added UTF8 decode function
|
| Thu, 09 Aug 2018 22:38:56 +0200 |
Ideenmodellierer |
Resolve format warnings
|
| Tue, 07 Aug 2018 17:03:36 +0200 |
heinrichsweikamp |
language updates
|
| Tue, 07 Aug 2018 00:24:05 +0200 |
heinrichsweikamp |
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
|
| Sun, 05 Aug 2018 12:57:49 +0200 |
Ideenmodellierer |
Added missing ENTRY point
|
| Sun, 05 Aug 2018 12:57:23 +0200 |
Ideenmodellierer |
Allow RTE binaries > 64k size
|
| Sun, 05 Aug 2018 12:56:43 +0200 |
Ideenmodellierer |
Added reference projects
|
| Tue, 31 Jul 2018 22:28:21 +0200 |
Ideenmodellierer |
Resolved warnings pointing to possible invalid memory access
|
| Mon, 30 Jul 2018 11:37:39 +0200 |
heinrichsweikamp |
remove hgsub files
|
| Mon, 30 Jul 2018 11:31:20 +0200 |
heinrichsweikamp |
add o4pack files
|
| Sun, 29 Jul 2018 18:27:37 +0200 |
Ideenmodellierer |
Increased version number
|
| Sun, 29 Jul 2018 18:16:01 +0200 |
Ideenmodellierer |
Added instruction to optimize for size
|
| Sun, 29 Jul 2018 18:09:58 +0200 |
Ideenmodellierer |
Always include Fonts library (to have the adresses defined)
|
| Sun, 29 Jul 2018 18:07:52 +0200 |
Ideenmodellierer |
Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
|
| Sun, 29 Jul 2018 18:06:37 +0200 |
Ideenmodellierer |
Placed directory sections in firmware memory space
|
