Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 927: (0) tip
age author description
Tue, 26 Nov 2024 21:01:13 +0100 Ideenmodellierer Cleanup Internal Uart: Evo_2_23
Thu, 14 Nov 2024 20:13:18 +0100 Ideenmodellierer Bugfix sensor de-/activation handling: Evo_2_23
Wed, 13 Nov 2024 17:56:02 +0100 Ideenmodellierer Bugfix scrubber time: Evo_2_23
Wed, 13 Nov 2024 17:55:05 +0100 Ideenmodellierer Bugfix real scrubber time decreased in sim mode: Evo_2_23
Mon, 04 Nov 2024 20:21:02 +0100 Ideenmodellierer UART6 DMA handling: Evo_2_23
Sun, 03 Nov 2024 20:53:05 +0100 Ideenmodellierer Moved UART6 into a separate unit: Evo_2_23
Sun, 03 Nov 2024 18:19:51 +0100 Ideenmodellierer Improved mix mode ADC conversion: Evo_2_23
Sun, 03 Nov 2024 15:44:54 +0100 Ideenmodellierer Added view for position data: Evo_2_23
Sun, 03 Nov 2024 15:43:04 +0100 Ideenmodellierer GNSS support for external UART interface: Evo_2_23
Sun, 03 Nov 2024 15:40:55 +0100 Ideenmodellierer Switch external interface tx communication to DMA: Evo_2_23
Sun, 03 Nov 2024 15:37:00 +0100 Ideenmodellierer Bugfix external interface power up after sleep: Evo_2_23
Mon, 28 Oct 2024 20:34:58 +0100 Ideenmodellierer External sensor UART: Switch to DMA TX transfers: Evo_2_23
Sat, 19 Oct 2024 20:10:56 +0200 Ideenmodellierer SlowExitTimer: Evo_2_23
Sat, 19 Oct 2024 20:06:55 +0200 Ideenmodellierer Devbugfix SlowExit depth: Evo_2_23
Tue, 15 Oct 2024 21:10:45 +0200 Ideenmodellierer Adapted limit for better gas warning: Evo_2_23
Tue, 15 Oct 2024 21:07:07 +0200 Ideenmodellierer Ascent speed visualization: Evo_2_23
Tue, 15 Oct 2024 20:00:37 +0200 Ideenmodellierer VPMTable deco stop visualization: Evo_2_23
Tue, 15 Oct 2024 19:12:05 +0200 Ideenmodellierer Devbugfix Sample time resolution for longer dives: Evo_2_23
Tue, 15 Oct 2024 19:07:19 +0200 Ideenmodellierer Define state of new GPIO out pins: Evo_2_23
Sun, 13 Oct 2024 18:13:56 +0200 ideenmodellierer Deactivated GNSS per default Evo_2_23
Sun, 13 Oct 2024 18:13:35 +0200 ideenmodellierer Adaptation custom view deco plan for VPM: Evo_2_23
Sun, 13 Oct 2024 18:07:23 +0200 ideenmodellierer Bugfix de-/activation of deco stop consideration in simulator: Evo_2_23
Sun, 13 Oct 2024 17:38:16 +0200 ideenmodellierer DevBugfix SlowExit edit display: Evo_2_23
Sun, 13 Oct 2024 17:36:32 +0200 ideenmodellierer Ascent speed display: Evo_2_23
Thu, 03 Oct 2024 20:25:49 +0200 Ideenmodellierer Disable GNSS operations using compile switch: Evo_2_23
Wed, 02 Oct 2024 22:18:19 +0200 Ideenmodellierer VPM table mode: Evo_2_23
Wed, 02 Oct 2024 22:07:13 +0200 Ideenmodellierer Bugfix simulator/planer: Evo_2_23
Tue, 01 Oct 2024 14:18:21 +0200 heinrichsweikamp minor: LED/Vibration behavior on wake-up Evo_2_23
Mon, 30 Sep 2024 21:56:05 +0200 Ideenmodellierer Added data path and visualization for position data: Evo_2_23
Thu, 26 Sep 2024 18:40:41 +0200 ideenmodellierer Disabled debug features Evo_2_23
Thu, 26 Sep 2024 18:36:05 +0200 ideenmodellierer Use dive profile as source for simulator: Evo_2_23
Thu, 26 Sep 2024 18:32:36 +0200 ideenmodellierer Development Feature Runtime in Debugview: Evo_2_23
Wed, 18 Sep 2024 14:31:06 +0200 heinrichsweikamp Zusammenf?hren Evo_2_23
Wed, 18 Sep 2024 14:30:45 +0200 heinrichsweikamp GNSS UART DMA test Evo_2_23
Wed, 11 Sep 2024 22:32:05 +0200 Ideenmodellierer Reenabled fast communication: Evo_2_23
Tue, 10 Sep 2024 21:18:36 +0200 ideenmodellierer Smal modification slow exit counter: Evo_2_23
Tue, 10 Sep 2024 21:16:32 +0200 ideenmodellierer Added hysteresis for ascent speed coloring: Evo_2_23
Fri, 06 Sep 2024 18:43:30 +0200 heinrichsweikamp cleanup and disable function for GNSS uart and DMA Evo_2_23
Fri, 06 Sep 2024 16:46:22 +0200 heinrichsweikamp GNSS work in progress Evo_2_23
Tue, 03 Sep 2024 20:46:42 +0200 Ideenmodellierer Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_23
Tue, 03 Sep 2024 15:30:53 +0200 heinrichsweikamp adding GNSS code Evo_2_23
Sun, 01 Sep 2024 21:38:06 +0200 Ideenmodellierer Improve communication stability: Evo_2_23
Sun, 01 Sep 2024 21:35:50 +0200 Ideenmodellierer Replaced global hardwareDisplay with unit access: Evo_2_23
Sun, 01 Sep 2024 20:31:01 +0200 Ideenmodellierer Minor screen cleanup: Evo_2_23
Sat, 31 Aug 2024 18:14:40 +0200 Ideenmodellierer Added compile switch for predive check menu: Evo_2_23
Sat, 31 Aug 2024 17:35:52 +0200 Ideenmodellierer Added slow exit timer function: Evo_2_23
Sat, 31 Aug 2024 17:28:37 +0200 Ideenmodellierer Added filtering of ascent speed: Evo_2_23
Thu, 29 Aug 2024 15:01:30 +0200 heinrichsweikamp support for led and vibration Evo_2_23
Thu, 29 Aug 2024 12:03:10 +0200 heinrichsweikamp new bluetooth work, bootloader work Evo_2_23
Sun, 25 Aug 2024 18:55:43 +0200 heinrichsweikamp brightness settings and proper power down for new screen Evo_2_23
Tue, 20 Aug 2024 15:18:43 +0200 Ideenmodellierer DevBugfix: Exit condition deco_stop_depth Evo_2_23
Fri, 16 Aug 2024 16:17:51 +0200 heinrichsweikamp Minor: Enable CO2-Sensor as default now Evo_2_23
Thu, 15 Aug 2024 20:44:35 +0200 Ideenmodellierer DevBugfix: Added missing default language value Evo_2_23
Wed, 14 Aug 2024 16:50:55 +0200 heinrichsweikamp minor Evo_2_23
Wed, 14 Aug 2024 16:44:46 +0200 heinrichsweikamp merge new screen stuff Evo_2_23
Wed, 14 Aug 2024 14:41:04 +0200 Ideenmodellierer Added first time initialization for new bluetooth module: Evo_2_23
Tue, 13 Aug 2024 13:24:54 +0200 heinrichsweikamp support for new screen default
Mon, 12 Aug 2024 22:25:46 +0200 Ideenmodellierer Instrument code for Bootloader: Evo_2_23
Mon, 12 Aug 2024 22:23:03 +0200 Ideenmodellierer Reactivate Bootloader: Evo_2_23
Mon, 12 Aug 2024 15:14:19 +0200 Ideenmodellierer Introduce speed dependend coloring of depth: Evo_2_23
Mon, 12 Aug 2024 14:30:22 +0200 Ideenmodellierer Decrease calculation interval for ascend speed: Evo_2_23
Mon, 22 Jul 2024 16:40:14 +0200 heinrichsweikamp Zusammenf?hren
Mon, 22 Jul 2024 16:39:48 +0200 heinrichsweikamp When opening the logbook, or scrolling inside a logbook page,
Mon, 22 Jul 2024 16:38:36 +0200 heinrichsweikamp Fix incorrect logging of bailout to Open Circuit when using the best gas.
Tue, 02 Jul 2024 20:05:08 +0200 Ideenmodellierer Bugfix empty line in deco plan (VPM only): Evo_2_23
Tue, 02 Jul 2024 19:24:03 +0200 Ideenmodellierer Only use deco gas for calculation if option is enabled: Evo_2_23
Tue, 07 May 2024 21:25:25 +0200 Ideenmodellierer Synchronize ADC and UART activities: Evo_2_23
Tue, 07 May 2024 21:20:56 +0200 Ideenmodellierer Code cleanup Evo_2_23
Tue, 07 May 2024 21:20:33 +0200 Ideenmodellierer Improvment battery charger visualization: Evo_2_23
Tue, 07 May 2024 21:12:37 +0200 Ideenmodellierer Bugfix initialisation of surface pressure: Evo_2_23
Sun, 05 May 2024 17:27:28 +0200 Ideenmodellierer Developer feature debug warning: Evo_2_23
Sun, 05 May 2024 17:20:56 +0200 Ideenmodellierer Do not show SP tab if PSCR mode is active: Evo_2_23
Mon, 18 Mar 2024 21:52:25 +0100 Ideenmodellierer Redefine Deco gas creation function: Evo_2_23
Sat, 09 Mar 2024 20:05:33 +0100 Ideenmodellierer Development bugfix menu id handling: Evo_2_23
Thu, 07 Mar 2024 21:51:18 +0100 Ideenmodellierer Potential Bugfix Selection MenuEdit lifecycle: Evo_2_23
Thu, 07 Mar 2024 21:46:49 +0100 Ideenmodellierer Bugfix Selection of custom views: Evo_2_23
Thu, 07 Mar 2024 21:42:23 +0100 Ideenmodellierer Added line checks for System Menu: Evo_2_23
Fri, 01 Mar 2024 19:30:29 +0100 Ideenmodellierer Check line enable/disable state when a new page is selected: Evo_2_23
Thu, 29 Feb 2024 18:49:55 +0100 Ideenmodellierer Consider flipped screen for Predive menu: Evo_2_23
Thu, 15 Feb 2024 21:26:28 +0100 Ideenmodellierer Bugfix tInfo_write_content_simple flip: Evo_2_23
Tue, 13 Feb 2024 17:30:24 +0100 heinrichsweikamp Minor: Remove absolute paths from the reference project files
Sun, 21 Jan 2024 22:26:37 +0100 Ideenmodellierer Consider pressure offset compensation in case of setting a default value: Evo_2_23
Sun, 21 Jan 2024 22:24:36 +0100 Ideenmodellierer Added new PreDiveCheck info page: Evo_2_23
Sun, 21 Jan 2024 22:18:51 +0100 Ideenmodellierer Added option to adjust pressure to diveO2 reference: Evo_2_23
Sat, 20 Jan 2024 19:38:52 +0100 Ideenmodellierer Update version number and set beta state Evo_2_23
Mon, 15 Jan 2024 21:44:18 +0100 Ideenmodellierer Migrated Sentinel protocol to new UART structure: Evo_2_23
Sun, 07 Jan 2024 21:25:34 +0100 Ideenmodellierer Added autofocus for T3_DecoTTS view: Evo_2_23
Sun, 07 Jan 2024 21:21:58 +0100 Ideenmodellierer Development bugfix CO2 LLC: Evo_2_23
Sun, 07 Jan 2024 21:20:15 +0100 Ideenmodellierer Code cleanup: UART protocol definitions Evo_2_23
Fri, 05 Jan 2024 16:01:22 +0100 Ideenmodellierer Added T3 autofocus for Gas list: Evo_2_23
Wed, 27 Dec 2023 19:37:17 +0100 ideenmodellierer Bugfixes and code cleanup for BF views: Evo_2_23
Wed, 27 Dec 2023 19:24:44 +0100 ideenmodellierer Bugfix BF temperatur display and cv switching: Evo_2_23
Sun, 17 Dec 2023 21:49:02 +0100 Ideenmodellierer Added autofocus for BF Navigation view: Evo_2_23
Sun, 17 Dec 2023 21:14:17 +0100 Ideenmodellierer Added event based display changes for big font view: Evo_2_23
Sun, 17 Dec 2023 21:10:04 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Thu, 16 Nov 2023 20:37:20 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Thu, 16 Nov 2023 20:36:35 +0100 Ideenmodellierer Activated work gas for (p)scr mode: Evo_2_23
Thu, 16 Nov 2023 20:32:09 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not: Evo_2_23
Thu, 16 Nov 2023 20:25:01 +0100 Ideenmodellierer Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_23
Sun, 05 Nov 2023 20:21:42 +0100 Ideenmodellierer Added CO2 display to T3 Bigfont view: Evo_2_23
Sun, 05 Nov 2023 20:19:08 +0100 Ideenmodellierer Moved CO2 Menu from Xtra to Hardware: Evo_2_23
Wed, 11 Oct 2023 17:49:19 +0200 Ideenmodellierer Bugfix Line order of info screen with flip screen active: Evo_2_23
Mon, 09 Oct 2023 16:50:11 +0200 Ideenmodellierer Bugfix Flipscreen visualization:
Mon, 09 Oct 2023 16:50:11 +0200 Ideenmodellierer Bugfix Flipscreen visualization: Evo_2_23
Mon, 09 Oct 2023 15:10:10 +0200 Ideenmodellierer Starting 'Evo_2_23' branch Evo_2_23
Mon, 09 Oct 2023 11:23:27 +0200 heinrichsweikamp User Test
Mon, 25 Sep 2023 10:56:32 +0200 heinrichsweikamp 1.6.5 release
Sun, 24 Sep 2023 18:43:12 +0200 Ideenmodellierer Split definition of custom views:
Sun, 24 Sep 2023 18:39:26 +0200 Ideenmodellierer Added debug information in case an error in the settings has been detected:
Thu, 14 Sep 2023 13:24:30 +0200 heinrichsweikamp 1.6.4 release
Tue, 12 Sep 2023 12:02:49 +0200 heinrichsweikamp Testing build
Sun, 10 Sep 2023 11:46:45 +0200 heinrichsweikamp Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
Sun, 03 Sep 2023 18:03:49 +0200 Ideenmodellierer Bugfix CustomView selection during dive mode:
Sun, 03 Sep 2023 17:58:12 +0200 Ideenmodellierer Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Sun, 03 Sep 2023 17:53:07 +0200 Ideenmodellierer Used real sensor state in simulation:
Thu, 31 Aug 2023 10:33:25 +0200 heinrichsweikamp Testing build
Sun, 27 Aug 2023 20:59:12 +0200 Ideenmodellierer Added function to skip lines which are not needed for operation:
Sun, 27 Aug 2023 20:55:57 +0200 Ideenmodellierer Only jump to Sensor view during charging if sensors are connected:
Sun, 27 Aug 2023 20:51:13 +0200 Ideenmodellierer DevBugfix CO2 sensor in streaming mode:
Sat, 26 Aug 2023 13:38:13 +0200 heinrichsweikamp Testing build
Sat, 26 Aug 2023 13:37:06 +0200 heinrichsweikamp Zusammenf?hren
Sat, 26 Aug 2023 13:35:15 +0200 heinrichsweikamp Update Firmware version number
Mon, 21 Aug 2023 17:20:07 +0200 heinrichsweikamp Adds a simple countdown timer, available as a custom view in surface and dive mode.
Thu, 10 Aug 2023 21:35:34 +0200 Ideenmodellierer Cleanup initialisation code:
Thu, 10 Aug 2023 21:30:24 +0200 Ideenmodellierer Cleanup initialisation / deinitialization:
Thu, 10 Aug 2023 21:27:58 +0200 Ideenmodellierer Removed dependency to protocol setting:
Thu, 10 Aug 2023 21:24:04 +0200 Ideenmodellierer Update RTE version number
Tue, 08 Aug 2023 17:29:03 +0200 Ideenmodellierer Cleanup warnings
Mon, 07 Aug 2023 20:32:42 +0200 Ideenmodellierer Added CO2 mirrow instance:
Mon, 07 Aug 2023 20:29:44 +0200 Ideenmodellierer Migrated CO2 protocol implementation to new format:
Mon, 31 Jul 2023 20:10:27 +0200 Ideenmodellierer Use mirror sensortype for visualization:
Mon, 31 Jul 2023 20:00:06 +0200 Ideenmodellierer Expanded Sensor map structure:
Mon, 31 Jul 2023 19:50:36 +0200 Ideenmodellierer Moved DiveO2 sensor specific funtionality into separated file:
Mon, 31 Jul 2023 19:46:29 +0200 Ideenmodellierer Restructure UART based sensor handling:
Thu, 27 Jul 2023 21:52:19 +0200 Ideenmodellierer Bugfix PSCR Settings in Simulator Mode:
Sat, 05 Aug 2023 11:52:08 +0200 heinrichsweikamp Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Wed, 02 Aug 2023 08:41:03 +0200 heinrichsweikamp update current build for testing
Tue, 25 Jul 2023 14:48:58 +0200 heinrichsweikamp Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
Wed, 12 Jul 2023 10:13:25 +0200 heinrichsweikamp When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
Tue, 04 Jul 2023 14:39:06 +0200 heinrichsweikamp Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
Sun, 04 Jun 2023 21:59:26 +0200 Ideenmodellierer Dev Bugfx Empty buffer indication and stability improvments:
Sun, 04 Jun 2023 21:54:24 +0200 Ideenmodellierer Cleanup sensor data interface:
Wed, 31 May 2023 08:44:07 +0200 heinrichsweikamp Change support from Pyroscience -> DiveO2 sensors
Tue, 30 May 2023 18:44:20 +0200 Ideenmodellierer Bugfixloop UART multiplexer integration:
Mon, 29 May 2023 20:26:38 +0200 Ideenmodellierer Update digital O2 sensor information:
Mon, 29 May 2023 20:22:15 +0200 Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
Mon, 29 May 2023 18:26:55 +0200 Ideenmodellierer Update real multiplexer implementation:
Tue, 23 May 2023 21:50:19 +0200 Ideenmodellierer Discovery<=>SmallCPU inferface update:
Tue, 23 May 2023 21:45:34 +0200 Ideenmodellierer Added UART multiplexer support for DiveO2:
Mon, 22 May 2023 09:15:09 +0200 heinrichsweikamp Zusammenf?hren
Mon, 22 May 2023 09:14:27 +0200 heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Thu, 18 May 2023 09:49:17 +0200 heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 11 May 2023 12:13:03 +0200 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:35:40 +0100 Ideenmodellierer Bugfix data synchronization after RTE start:
Sat, 07 Jan 2023 18:11:52 +0100 Ideenmodellierer Update CO2 sensor implementation:
Thu, 05 Jan 2023 18:30:06 +0100 Ideenmodellierer Development feature: external pressure sensor
Thu, 05 Jan 2023 18:27:04 +0100 Ideenmodellierer DigO2 added raw data request:
Thu, 05 Jan 2023 18:25:47 +0100 Ideenmodellierer Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:22:21 +0100 Ideenmodellierer DigO2 added raw data request:
Tue, 03 Jan 2023 19:47:12 +0100 Ideenmodellierer Bugfix set date (year):
Sun, 27 Nov 2022 15:18:00 +0100 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 20 Nov 2022 20:49:41 +0100 Ideenmodellierer Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:46:10 +0100 Ideenmodellierer Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:43:04 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:33 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:42:08 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:37:44 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:36:34 +0100 Ideenmodellierer Bugfix PSCR menu button label:
Tue, 08 Nov 2022 22:16:56 +0100 Ideenmodellierer Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 21:16:17 +0100 Ideenmodellierer Extension scrubber time:
Tue, 08 Nov 2022 21:13:14 +0100 Ideenmodellierer Bugfix compass bearing:
Thu, 03 Nov 2022 20:44:51 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:37:06 +0100 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
Tue, 01 Nov 2022 09:55:45 +0100 Ideenmodellierer Bugfix release frame:
Fri, 28 Oct 2022 20:49:21 +0200 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:32:24 +0200 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:29:37 +0200 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 19:39:20 +0200 Ideenmodellierer Bugfix display of deactivated sensors:
Tue, 18 Oct 2022 21:21:32 +0200 Ideenmodellierer Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 20:56:19 +0200 Ideenmodellierer Cleanup warnings:
Sun, 25 Sep 2022 21:13:45 +0200 Ideenmodellierer Bugfix Empty menu:
Sun, 25 Sep 2022 21:09:18 +0200 Ideenmodellierer Improvment key event detection:
Fri, 19 Aug 2022 11:30:24 +0200 heinrichsweikamp Merge
Fri, 19 Aug 2022 11:27:44 +0200 heinrichsweikamp 1.6.0 release Betatest
Sat, 06 Aug 2022 11:10:56 +0200 heinrichsweikamp Update current build for testing Betatest
Fri, 05 Aug 2022 16:04:52 +0200 Ideenmodellierer Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 15:27:01 +0200 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:26:28 +0200 Ideenmodellierer Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:22:26 +0200 Ideenmodellierer Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:15:01 +0200 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:13:29 +0200 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:10:10 +0200 Ideenmodellierer Increased version numbers: Betatest
Fri, 05 Aug 2022 14:56:17 +0200 Ideenmodellierer Bugfix Battery charge complete event: Betatest
Wed, 03 Aug 2022 18:19:03 +0200 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
Thu, 02 Jun 2022 20:24:59 +0200 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
Mon, 16 May 2022 20:50:26 +0200 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 25 Apr 2022 21:15:01 +0200 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:10:10 +0200 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:07:28 +0200 Ideenmodellierer Bugfix visualization better setpoint: Betatest
Fri, 22 Apr 2022 18:24:43 +0200 Jan Mulder cleanup: Use correct "per" symbol Betatest
Thu, 21 Apr 2022 21:02:50 +0200 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
Wed, 20 Apr 2022 20:25:04 +0200 Jan Mulder Move include file to common to ... Betatest
Mon, 22 Nov 2021 19:39:11 +0100 Jan Mulder Allow longer scrubber time Betatest
Wed, 30 Mar 2022 18:07:21 +0200 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:01:29 +0200 heinrichsweikamp Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:00:21 +0200 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
Sat, 12 Mar 2022 23:01:11 +0100 Ideenmodellierer Added Charging view: Betatest
Sat, 12 Mar 2022 22:58:22 +0100 Ideenmodellierer Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:54:26 +0100 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:49:09 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:42:56 +0100 Ideenmodellierer Increased version number Betatest
Sat, 12 Mar 2022 14:57:54 +0100 heinrichsweikamp increase version numbers for upcomming release Betatest
Fri, 24 Dec 2021 13:40:47 +0100 heinrichsweikamp update test build Betatest
Tue, 21 Dec 2021 19:36:41 +0100 Ideenmodellierer Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:32:29 +0100 Ideenmodellierer Revert Setbluetooh name changes Betatest
Tue, 14 Dec 2021 15:36:10 +0100 heinrichs weikamp PSCR Mode Betatest
Mon, 01 Nov 2021 12:39:34 +0100 heinrichs weikamp Undo Rev. 660
Sun, 08 Aug 2021 09:36:23 +0200 heinrichsweikamp Add option to reset bluetooth name
Wed, 28 Apr 2021 09:47:25 +0200 heinrichs weikamp Update build file for testing
Tue, 27 Apr 2021 21:29:26 +0200 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
Mon, 26 Apr 2021 15:03:04 +0200 heinrichs weikamp Update release date
Sun, 25 Apr 2021 20:47:01 +0200 Ideenmodellierer Added visualization of scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200 Ideenmodellierer Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:41:19 +0200 Ideenmodellierer Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:36:18 +0200 Ideenmodellierer Bugfix temperature display Logpage2:
Mon, 19 Apr 2021 20:34:53 +0200 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:20:38 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:16:24 +0200 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:14:20 +0200 Ideenmodellierer Motion detection: Enable focus after focus calibration:
Tue, 13 Apr 2021 19:25:41 +0200 Ideenmodellierer Integrated selection of bailout in the diluent selection page:
Tue, 13 Apr 2021 19:21:14 +0200 Ideenmodellierer Remove battery charge counter from information menu:
Tue, 13 Apr 2021 19:18:32 +0200 Ideenmodellierer Small changes in charger state handling:
Tue, 30 Mar 2021 10:34:12 +0200 heinrichs weikamp Compile with ENABLE_CHARGER_STATUS_V2
Wed, 24 Mar 2021 22:06:00 +0100 Ideenmodellierer Reimplemented charger status generation (deactivated):
Wed, 24 Mar 2021 21:28:41 +0100 Ideenmodellierer Do not show focus indicator in case motion detection is suspended:
Thu, 11 Mar 2021 21:45:22 +0100 Ideenmodellierer Development Bugfix Deco bars not shown after last deco stop passed:
Thu, 11 Mar 2021 21:43:43 +0100 Ideenmodellierer Development bugfix Viewport settings:
Thu, 25 Feb 2021 12:20:43 +0100 heinrichsweikamp add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
Wed, 24 Feb 2021 21:45:35 +0100 Ideenmodellierer Added last measured PPO2 value to sensor selection dialog:
Wed, 24 Feb 2021 21:04:07 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:54 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:22 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 19:18:26 +0100 Ideenmodellierer Enable sensor check for Analog PPO2 mode:
Tue, 23 Feb 2021 21:58:18 +0100 Ideenmodellierer Added menu structure to allow ppo2 modification in simulator mode:
Tue, 23 Feb 2021 21:55:52 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:55:26 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:54:56 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:53:24 +0100 Ideenmodellierer Added functionality to add ppo2 mV offset:
Fri, 12 Feb 2021 21:46:36 +0100 Ideenmodellierer Added compile switch for T3_PROFILE menu operation option
Fri, 12 Feb 2021 21:43:27 +0100 Ideenmodellierer Improve in / out of focus transitions:
Fri, 12 Feb 2021 21:37:50 +0100 Ideenmodellierer Added option to select sensitivity of focus detection:
Mon, 08 Feb 2021 21:35:46 +0100 Ideenmodellierer Switch Sector / Scroll detection to vector implementation:
Sun, 07 Feb 2021 22:05:32 +0100 Ideenmodellierer Development bugfix: Marker in standard t3 view drawn in wrong direction
Sun, 07 Feb 2021 22:04:43 +0100 Ideenmodellierer Improvment frame Handling:
Wed, 03 Feb 2021 21:45:48 +0100 Ideenmodellierer Adjustments for flipped display view:
Wed, 03 Feb 2021 21:44:22 +0100 Ideenmodellierer Use roll and pitch agles in 0-360 format:
Wed, 27 Jan 2021 22:12:44 +0100 Ideenmodellierer Added minilog functions to allow marker synchronisation:
Wed, 27 Jan 2021 22:10:11 +0100 Ideenmodellierer Added t3 quick menu for marker synchronisation:
Wed, 27 Jan 2021 22:04:45 +0100 Ideenmodellierer Development bugfix: focus state not remembered:
Wed, 27 Jan 2021 22:03:11 +0100 Ideenmodellierer Development bugfix: Low battery warning was interpretated as marker:
Wed, 27 Jan 2021 21:58:46 +0100 Ideenmodellierer Development bugfix: show replay symbol only for the selected dive:
Wed, 27 Jan 2021 21:56:48 +0100 Ideenmodellierer Moved non critical functions from timer interrupt to main loop:
Wed, 20 Jan 2021 20:05:05 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:33:07 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:20:29 +0100 Ideenmodellierer Bugfix inverted whitspace:
Thu, 14 Jan 2021 21:25:15 +0100 Ideenmodellierer Suspend MotionDetection events while diver is operationg the OSTC:
Thu, 14 Jan 2021 20:38:28 +0100 Ideenmodellierer Added access to logbook marker data:
Thu, 14 Jan 2021 19:17:28 +0100 Ideenmodellierer Bugfix: CalibViewport were shown even in case the compile switch had not been set:
Fri, 05 Feb 2021 14:53:50 +0100 heinrichsweikamp Update RTE required value for release
Fri, 05 Feb 2021 14:50:18 +0100 heinrichsweikamp Added tag v1.5.6 release for changeset 06ec1da5e105
Fri, 05 Feb 2021 14:50:05 +0100 heinrichsweikamp 1.5.6 release v1.5.6 release
Thu, 07 Jan 2021 09:53:04 +0100 heinrichsweikamp change O2_CALIB_FRACTION_O2 to 0.98
Wed, 06 Jan 2021 21:01:00 +0100 Ideenmodellierer Merged menu items of viewport and motion control:
Wed, 06 Jan 2021 19:41:43 +0100 Ideenmodellierer T3 profile view: Added visualization of deco data
Tue, 05 Jan 2021 20:35:01 +0100 Ideenmodellierer Added replay data scaling in case life data is longer than replay block
Mon, 04 Jan 2021 22:49:07 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 22:45:37 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:48:31 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 21:41:51 +0100 Ideenmodellierer New replay block for T3 profile:
Mon, 04 Jan 2021 21:38:28 +0100 Ideenmodellierer MotionControl-Sector: Map sectors during switch T7 <=> T3:
Mon, 04 Jan 2021 21:35:38 +0100 Ideenmodellierer Added functionality to select a dive to be shown in the T3 profile view:
Mon, 04 Jan 2021 21:32:39 +0100 Ideenmodellierer Bugfix Selection of primary view:
Mon, 04 Jan 2021 21:30:04 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:24:24 +0100 Ideenmodellierer Added PrintGraph option to skip invalid data entries:
Sun, 03 Jan 2021 14:43:16 +0100 Ideenmodellierer MotionCtrl - Sectorview Map sectors directly to custom views:
Wed, 06 Jan 2021 22:02:49 +0100 heinrichsweikamp Minor: Comment translation into English
Tue, 22 Dec 2020 22:23:11 +0100 Ideenmodellierer Align VPM tag in log list to be at same position as GF tag:
Thu, 17 Dec 2020 10:58:28 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Thu, 17 Dec 2020 09:52:12 +0100 heinrichsweikamp Update current build, "RTErequired" value and release date
Wed, 16 Dec 2020 09:43:11 +0100 heinrichsweikamp update ostc4pack sample files
Sun, 13 Dec 2020 18:31:40 +0100 Ideenmodellierer Motion control: Jump back to primary view if focus is lost:
Sun, 13 Dec 2020 18:29:12 +0100 Ideenmodellierer Reduced view angle and number of vusiualized custom views in setor mode:
Sat, 12 Dec 2020 21:05:11 +0100 Ideenmodellierer Added option for 100% o2 calibration:
Sat, 12 Dec 2020 20:54:31 +0100 Ideenmodellierer Solved minor warnings
Sat, 12 Dec 2020 20:52:58 +0100 Ideenmodellierer Show Fallback if no valid sensor value is available:
Sat, 12 Dec 2020 19:18:57 +0100 Ideenmodellierer Added ex Interface measurement restart in case of i2c disturbance:
Sat, 12 Dec 2020 19:16:37 +0100 Ideenmodellierer Bugfix bad resolution of compass LSM303AGR:
Thu, 03 Dec 2020 13:17:32 +0100 heinrichsweikamp Minor: Functional inert cleanup of some unused variables
Sun, 29 Nov 2020 23:02:11 +0100 Ideenmodellierer Rework pitch detection:
Sun, 29 Nov 2020 22:58:11 +0100 Ideenmodellierer Handle o2 voltage values < 0.5mV as invalid:
Sun, 29 Nov 2020 22:55:31 +0100 Ideenmodellierer Return to o2 values:
Sun, 29 Nov 2020 22:53:33 +0100 Ideenmodellierer Change style of viewport calibration menu:
Wed, 25 Nov 2020 20:26:01 +0100 Ideenmodellierer Improved focus detection:
Wed, 25 Nov 2020 20:19:50 +0100 Ideenmodellierer Update String "Blickwinkel":
Wed, 25 Nov 2020 20:18:22 +0100 Ideenmodellierer Added debug view to viewport calibration:
Wed, 25 Nov 2020 20:16:20 +0100 Ideenmodellierer Reactivate compass parameter stored in NVM:
Mon, 30 Nov 2020 20:55:23 +0100 Ideenmodellierer Try to reduce legth of log entry string:
Mon, 30 Nov 2020 20:52:49 +0100 Ideenmodellierer Added new section "lower.font":
Sun, 29 Nov 2020 11:41:03 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Tue, 24 Nov 2020 13:22:23 -0600 izzni -Add 12HR Time Support
Sat, 21 Nov 2020 17:41:59 +0100 heinrichsweikamp add current build
Sun, 15 Nov 2020 20:12:19 +0100 Ideenmodellierer Bugfix center / right alignment if dualfont is used:
Sun, 15 Nov 2020 20:09:31 +0100 Ideenmodellierer Bugfix One or more deactivated sensors hide sensor display:
Sun, 15 Nov 2020 20:01:56 +0100 Ideenmodellierer Refine o2 sensor diagnostic functions:
Sun, 15 Nov 2020 19:58:14 +0100 Ideenmodellierer Added ADC sensor interface to O2 sensore menu structure:
Sun, 15 Nov 2020 19:54:36 +0100 Ideenmodellierer Solved minor warnings
Sun, 15 Nov 2020 19:53:09 +0100 Ideenmodellierer Added O2 sensor source and calibration parameters to setting structure
Sun, 15 Nov 2020 19:52:03 +0100 Ideenmodellierer Check if HW evaluation was performed:
Thu, 12 Nov 2020 20:06:04 +0100 Ideenmodellierer Changed operation mode of RecoverSampleIndex:
Thu, 12 Nov 2020 20:03:00 +0100 Ideenmodellierer Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
Thu, 12 Nov 2020 19:54:58 +0100 Ideenmodellierer Switch source of o2 sensor data depending on availability of external ADC:
Thu, 12 Nov 2020 19:48:28 +0100 Ideenmodellierer Added HW_Info to Discovery <=> RTE data exchange:
Thu, 12 Nov 2020 19:46:03 +0100 Ideenmodellierer Added external ADC interface functionality (MCP3424):
Sun, 08 Nov 2020 18:49:54 +0100 Ideenmodellierer Added color indicator for focus state:
Sun, 08 Nov 2020 18:46:46 +0100 Ideenmodellierer Added menu structure to acces viewport calibration:
Sun, 08 Nov 2020 18:43:19 +0100 Ideenmodellierer Added viewport functionality:
Sun, 08 Nov 2020 18:38:53 +0100 Ideenmodellierer Make sure motion detection settings are set to default values:
Sun, 08 Nov 2020 18:36:02 +0100 Ideenmodellierer Only execute motion detection functions if features is enabled:
Sun, 08 Nov 2020 16:38:43 +0100 Ideenmodellierer Update roll and pitch value in simulation mode:
Mon, 02 Nov 2020 21:17:45 +0100 Ideenmodellierer Added viewport calibration to dive menu:
Mon, 02 Nov 2020 21:15:42 +0100 Ideenmodellierer Added new settings for Viewport:
Tue, 03 Nov 2020 12:47:51 +0100 heinrichsweikamp Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
Mon, 02 Nov 2020 12:13:02 +0100 heinrichsweikamp add current build
Sun, 11 Oct 2020 18:33:19 +0200 Ideenmodellierer Shortend t3 view names:
Sat, 10 Oct 2020 21:02:05 +0200 Ideenmodellierer Added new t3 view showing first deco stop and tts in parallel:
Sat, 10 Oct 2020 18:34:10 +0200 Ideenmodellierer Added default view selection and auto return to view to t3 visualization:
Sat, 10 Oct 2020 18:30:13 +0200 Ideenmodellierer Bugfix return from submenu in t3 view:
Sat, 10 Oct 2020 16:59:18 +0200 Ideenmodellierer Added inertia simulation for compass heading:
Sat, 10 Oct 2020 13:51:44 +0200 Ideenmodellierer BugFix firmware downgrade to version with less settings:
Wed, 07 Oct 2020 18:07:10 +0200 Ideenmodellierer Added center / right alignment option to custom text display:
Wed, 07 Oct 2020 17:15:27 +0200 Ideenmodellierer Changed visualization of Depth / temperatur / debugview entry
Wed, 07 Oct 2020 17:12:44 +0200 Ideenmodellierer Increased max value for surface pressure:
Sun, 04 Oct 2020 15:50:43 +0200 heinrichsweikamp Added tag 1.5.5 release for changeset 02e7e11fdbe8
Fri, 25 Sep 2020 11:13:03 +0200 heinrichsweikamp increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
Wed, 16 Sep 2020 10:52:57 +0200 heinrichsweikamp add current build
Tue, 15 Sep 2020 20:57:04 +0200 Ideenmodellierer Bugfix custom view selection dialog:
Tue, 15 Sep 2020 20:54:54 +0200 Ideenmodellierer Bugfix: No need to consider surface custom view in count of enabled view:
Tue, 15 Sep 2020 20:52:39 +0200 Ideenmodellierer Added skip condition in custom view selection:
Sun, 13 Sep 2020 20:59:38 +0200 Ideenmodellierer Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:58:37 +0200 Ideenmodellierer Do not show gases in "Off" state in custom gas list:
Sun, 13 Sep 2020 20:55:54 +0200 Ideenmodellierer Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:49:58 +0200 Ideenmodellierer Change color ID used in strings for light grey:
Sun, 13 Sep 2020 20:44:50 +0200 Ideenmodellierer Minor: Removed duplicated definition of number of available gases
Thu, 10 Sep 2020 20:52:47 +0200 Ideenmodellierer Changed string for data view selections:
Thu, 10 Sep 2020 20:51:36 +0200 Ideenmodellierer Added compile switch for motion control:
Thu, 10 Sep 2020 20:47:48 +0200 Ideenmodellierer Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Tue, 08 Sep 2020 21:24:14 +0200 Ideenmodellierer Moved custom view menu to new tab:
Sun, 06 Sep 2020 22:11:51 +0200 Ideenmodellierer Reset Safety Stop display in case of a new descend:
Sun, 06 Sep 2020 21:17:59 +0200 Ideenmodellierer Added T3_gaslist:
Sun, 06 Sep 2020 21:15:34 +0200 Ideenmodellierer Added color coding for cv gas list:
Sun, 06 Sep 2020 21:13:22 +0200 Ideenmodellierer Added quick menu function to big font view:
Sun, 06 Sep 2020 21:09:37 +0200 Ideenmodellierer Added missing display of button labels in refresh function:
Wed, 16 Sep 2020 10:30:28 +0200 heinrichsweikamp Properly send compass 3 into sleepmode (end-2019 hardware)
Mon, 31 Aug 2020 20:06:59 +0200 heinrichsweikamp Merge
Sun, 30 Aug 2020 17:31:29 +0200 Ideenmodellierer Added new strings for the selection of T3 custom views
Sun, 30 Aug 2020 17:30:54 +0200 Ideenmodellierer Minor adaptions in page layout:
Sun, 30 Aug 2020 17:26:52 +0200 Ideenmodellierer Display warning in t7 using centered strings
Sun, 30 Aug 2020 17:26:00 +0200 Ideenmodellierer Show page number in small letters if more than 8 tabs are active
Sun, 30 Aug 2020 17:23:44 +0200 Ideenmodellierer Reimplementation of tMenuEdit_select:
Sun, 30 Aug 2020 17:20:16 +0200 Ideenmodellierer Added new menu tab into call structure
Sun, 30 Aug 2020 17:19:23 +0200 Ideenmodellierer Added new top level menu for customization of views
Sun, 30 Aug 2020 17:14:31 +0200 Ideenmodellierer Removed second big font profile
Mon, 24 Aug 2020 19:59:28 +0200 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:53:27 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:39:28 +0200 Ideenmodellierer Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:36:18 +0200 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:31:05 +0200 Ideenmodellierer Added compile switch to enable / disable new BigFont layout
Mon, 24 Aug 2020 19:30:15 +0200 Ideenmodellierer Added dew parameter to enable selection of customer BigFont screens to be displayed
Mon, 24 Aug 2020 19:59:28 +0200 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:53:27 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:39:28 +0200 Ideenmodellierer Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:36:18 +0200 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Thu, 20 Aug 2020 21:25:38 +0200 Ideenmodellierer Added compiler switch for existing debug view parameter
Mon, 10 Aug 2020 15:53:45 +0200 heinrichsweikamp Added tag v1.5.4 release for changeset e9ca66ce36e5
Wed, 22 Jul 2020 11:55:53 +0200 heinrichsweikamp 1.5.4 release v1.5.4 release
Mon, 29 Jun 2020 16:18:17 +0200 heinrichsweikamp add wiki sub-directory
Sat, 27 Jun 2020 18:40:32 +0200 heinrichsweikamp Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
Tue, 26 May 2020 19:27:07 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
Tue, 26 May 2020 21:13:12 +0200 ideenmodellierer Bugfix header EEPROM layout: FixLayout_Header_LogView
Tue, 26 May 2020 21:13:00 +0200 ideenmodellierer Bugfix right alignment of string: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:46 +0200 ideenmodellierer Small corrections layout Divelog page 1: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:02 +0200 ideenmodellierer Development option only read bottledata: FixLayout_Header_LogView
Tue, 19 May 2020 07:27:18 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
Mon, 18 May 2020 21:51:08 +0200 ideenmodellierer Bugfix calculation of string center position: Improve_Button_Sleep
Wed, 13 May 2020 21:56:35 +0200 ideenmodellierer Code cleanup pressure plausibility check: Improve_Button_Sleep
Wed, 13 May 2020 21:27:30 +0200 ideenmodellierer Bugfix unintended else condition: Improve_Button_Sleep
Tue, 12 May 2020 23:03:50 +0200 ideenmodellierer Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep
Tue, 12 May 2020 23:03:29 +0200 ideenmodellierer Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep
Tue, 12 May 2020 22:54:19 +0200 ideenmodellierer Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep
Tue, 12 May 2020 22:52:05 +0200 ideenmodellierer Changed default values: Improve_Button_Sleep
Tue, 12 May 2020 22:42:52 +0200 ideenmodellierer Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep
Tue, 12 May 2020 22:39:18 +0200 ideenmodellierer Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep
Tue, 28 Apr 2020 15:37:47 +0000 heinrichsweikamp Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
Wed, 22 Apr 2020 13:08:57 +0200 Jan Mulder bugfix: implement battery charge percentage in dive header fix-bat-2
Wed, 15 Apr 2020 07:01:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
Tue, 14 Apr 2020 19:45:34 +0200 ideenmodellierer Removed no longer needed reset profile function: Improve_Logtansfer
Tue, 14 Apr 2020 19:44:19 +0200 ideenmodellierer Moved and deactivated analyse sample buffer switch: Improve_Logtansfer
Tue, 14 Apr 2020 19:29:23 +0200 ideenmodellierer Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer
Tue, 14 Apr 2020 19:27:04 +0200 ideenmodellierer Removed invalidate header function because it is no lonnger needed Improve_Logtansfer
Tue, 14 Apr 2020 19:22:56 +0200 ideenmodellierer Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer
Mon, 13 Apr 2020 16:00:54 +0200 ideenmodellierer Added compile switch to handle additional data during raw header request: Improve_Logtansfer
Sun, 12 Apr 2020 21:02:34 +0200 ideenmodellierer Added function to transfer sample buffer: Improve_Logtansfer
Wed, 08 Apr 2020 16:34:54 +0200 heinrichsweikamp Power-down Bluetooth on COMM exit
Mon, 30 Mar 2020 13:16:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
Sun, 29 Mar 2020 21:55:00 +0200 Ideenmodellierer merged default into minor_improvments minor_improvments
Sun, 29 Mar 2020 21:39:57 +0200 ideenmodellierer Activated reset of sample information within header data at time of sector erasing: minor_improvments
Sat, 28 Mar 2020 21:41:47 +0100 ideenmodellierer Added ppO2 to dummy profile data: minor_improvments
Tue, 24 Mar 2020 22:32:48 +0100 ideenmodellierer Eliminated some minor warnings minor_improvments
Tue, 24 Mar 2020 22:14:16 +0100 ideenmodellierer Transfer a dummy profile in case of missing sample information: minor_improvments
Tue, 24 Mar 2020 22:12:08 +0100 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 22:08:29 +0100 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 21:59:38 +0100 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:59:11 +0100 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:49:52 +0100 ideenmodellierer Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
Tue, 24 Mar 2020 21:48:27 +0100 ideenmodellierer Added new compile switches for variants: minor_improvments
Mon, 23 Mar 2020 21:14:54 +0100 ideenmodellierer Added initialization of bottle sensor data age counter minor_improvments
Mon, 23 Mar 2020 21:13:52 +0100 ideenmodellierer Added compile switch to show voltage parallel to charge status percantage minor_improvments
Mon, 23 Mar 2020 21:10:02 +0100 ideenmodellierer Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
Thu, 05 Mar 2020 22:31:50 +0100 ideenmodellierer Introduced configuration header for variant managment: minor_improvments
Thu, 05 Mar 2020 22:27:55 +0100 ideenmodellierer Removed duplicated definition: minor_improvments
Sat, 29 Feb 2020 22:27:29 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:27:04 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:25:20 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sun, 01 Mar 2020 10:06:45 +0100 heinrichsweikamp fix potential issue with >255 dives in the logbook
Thu, 27 Feb 2020 09:13:25 +0100 heinrichsweikamp Added tag v1.5.3 release for changeset 5b4c78c36b04
Thu, 27 Feb 2020 09:13:08 +0100 heinrichsweikamp 1.5.3 release v1.5.3 release
Mon, 24 Feb 2020 15:17:54 +0100 heinrichsweikamp update the 1.5.3 for tests
Mon, 24 Feb 2020 07:58:37 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
Sun, 23 Feb 2020 21:18:49 +0100 ideenmodellierer Moved power on detection to RTE: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:17:17 +0100 ideenmodellierer Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:13:28 +0100 ideenmodellierer Reduced timeout for common UART communication: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:09:56 +0100 ideenmodellierer Detect startup after power off: Improve_BatteryGasGauge
Tue, 18 Feb 2020 12:41:45 +0100 heinrichsweikamp show battery percent and voltage and surfacemode. That gives additional
Tue, 18 Feb 2020 09:58:52 +0100 heinrichsweikamp make a 1.5.3 for tests
Tue, 18 Feb 2020 07:20:29 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
Mon, 17 Feb 2020 19:43:09 +0100 ideenmodellierer Marked possible code improvment for future activities: ImprovmentNVM_2
Mon, 17 Feb 2020 19:04:10 +0100 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
Sun, 16 Feb 2020 22:04:52 +0100 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
Sat, 15 Feb 2020 20:50:58 +0100 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
Sat, 15 Feb 2020 20:50:20 +0100 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
Sat, 15 Feb 2020 20:45:19 +0100 ideenmodellierer Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2
Mon, 10 Feb 2020 19:40:33 +0100 ideenmodellierer ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2
Mon, 10 Feb 2020 19:29:12 +0100 ideenmodellierer Moved Timeout handling out of 100ms callback: ImprovmentNVM_2
Mon, 10 Feb 2020 19:25:09 +0100 ideenmodellierer Enable sequentionel writing of device data: ImprovmentNVM_2
Mon, 10 Feb 2020 19:15:27 +0100 ideenmodellierer Optimize ef_write_block function: ImprovmentNVM_2
Mon, 10 Feb 2020 08:23:15 +0000 heinrichsweikamp Merged in janlmulder/ostc4/maintain-2 (pull request #38)
Fri, 07 Feb 2020 16:38:11 +0100 Jan Mulder Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
Wed, 15 Jan 2020 13:41:01 +0100 heinrichsweikamp 1.5.2 beta with RTE 2.02 v1.5.2.beta release
Wed, 15 Jan 2020 10:53:15 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
Tue, 14 Jan 2020 21:52:15 +0100 Ideenmodellierer merged default into Improvment_NVM Improment_NVM
Tue, 14 Jan 2020 21:38:45 +0100 ideenmodellierer Added compile switch for restoring of last known date after power lost: Improment_NVM
Tue, 14 Jan 2020 21:10:37 +0100 ideenmodellierer Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
Tue, 14 Jan 2020 21:08:45 +0100 ideenmodellierer Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
Mon, 13 Jan 2020 20:27:57 +0100 ideenmodellierer Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
Sun, 12 Jan 2020 21:33:13 +0100 ideenmodellierer Bugfix display compass calibration frozen: Improment_NVM
Sun, 12 Jan 2020 19:55:22 +0100 ideenmodellierer Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
Sun, 12 Jan 2020 19:50:14 +0100 ideenmodellierer Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
Sun, 12 Jan 2020 18:06:59 +0100 ideenmodellierer Bugfix parallel call of external flash functions: Improment_NVM
Sun, 12 Jan 2020 17:57:11 +0100 ideenmodellierer Bugfix Min max values for device data checks: Improment_NVM
Sun, 12 Jan 2020 17:47:02 +0100 ideenmodellierer Bugfix Display of Sensor values: Improment_NVM
Sun, 12 Jan 2020 17:45:36 +0100 ideenmodellierer Bugfix: display of time of minimum voltag: Improment_NVM
Wed, 08 Jan 2020 15:35:15 +0100 heinrichsweikamp We got one report of false/freezd depth reading when jumping into 2m depth
Sun, 05 Jan 2020 14:57:50 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
Sun, 29 Dec 2019 09:42:16 +0100 Ideenmodellierer merged default into ImproveBluetooth ImproveBluetooth
Sat, 28 Dec 2019 19:42:04 +0100 ideenmodellierer Added retry through power off/on cycle: ImproveBluetooth
Sat, 21 Dec 2019 20:21:26 +0100 ideenmodellierer Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
Mon, 02 Dec 2019 22:03:05 +0100 ideenmodellierer Bugfix: Merge / cleanup problem: ImproveBluetooth
Sun, 01 Dec 2019 19:55:15 +0100 ideenmodellierer Added missing enum for configuration states ImproveBluetooth
Tue, 26 Nov 2019 22:12:25 +0100 ideenmodellierer Added function for BlueMod configuration: ImproveBluetooth
Tue, 26 Nov 2019 21:17:57 +0100 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:16:36 +0100 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:14:58 +0100 ideenmodellierer Configurate FlowCntrl Pins as noPull ImproveBluetooth
Tue, 26 Nov 2019 18:13:26 +0100 ideenmodellierer Bugfix negativ ascend bar: ImproveBluetooth
Tue, 26 Nov 2019 18:02:48 +0100 ideenmodellierer Move Constants and libm to start of firmware ROM block: ImproveBluetooth
Mon, 02 Dec 2019 07:56:47 +0000 heinrichsweikamp Merged in janlmulder/ostc4/maintain-1 (pull request #35)
Sun, 01 Dec 2019 17:28:35 +0100 Jan Mulder Fix case for case sensitive OS maintain-1
Sun, 01 Dec 2019 17:12:27 +0100 Jan Mulder Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
Sun, 24 Nov 2019 15:46:58 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
Mon, 21 Oct 2019 21:16:53 +0200 ideenmodellierer Added key direction awarness to t3, t5 and t6 views: MotionDetection
Mon, 21 Oct 2019 18:37:43 +0200 ideenmodellierer Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
Thu, 17 Oct 2019 23:09:17 +0200 ideenmodellierer Consider number of available t3 views in sector handling: MotionDetection
Thu, 17 Oct 2019 21:15:42 +0200 ideenmodellierer Combine variables in a structure to improve readability of code MotionDetection
Thu, 10 Oct 2019 22:26:03 +0200 Ideenmodellierer merge default MotionDetection
Thu, 10 Oct 2019 22:11:59 +0200 ideenmodellierer Simplified pitch detection state machine: MotionDetection
Thu, 10 Oct 2019 22:09:52 +0200 ideenmodellierer Minor code cleanup MotionDetection
Mon, 16 Sep 2019 22:49:34 +0200 ideenmodellierer Added missing customerview selection MotionDetection
Mon, 16 Sep 2019 22:46:24 +0200 ideenmodellierer Incremented "idle window" for scroll detection MotionDetection
Mon, 16 Sep 2019 20:57:40 +0200 ideenmodellierer Motion events effect custom view in dive mode only MotionDetection
Mon, 16 Sep 2019 20:21:06 +0200 ideenmodellierer Added string for Empty/ Debug custom view selection MotionDetection
Tue, 10 Sep 2019 20:51:55 +0200 ideenmodellierer Use Enum values for initialization and setting check: MotionDetection
Sun, 08 Sep 2019 13:45:43 +0200 ideenmodellierer Removed some warnings MotionDetection
Sun, 08 Sep 2019 13:45:17 +0200 ideenmodellierer Add scroll event by pitch angle detection: MotionDetection
Mon, 19 Aug 2019 17:50:55 +0200 Ideenmodellierer merged default into MotionDetection MotionDetection
Mon, 19 Aug 2019 17:39:47 +0200 ideenmodellierer Added parameter for number of sectors to be defined MotionDetection
Tue, 13 Aug 2019 21:13:54 +0200 ideenmodellierer Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
Tue, 13 Aug 2019 21:12:17 +0200 ideenmodellierer Added a function to count the active custom views. MotionDetection
Tue, 13 Aug 2019 21:10:46 +0200 ideenmodellierer Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
Sat, 20 Jul 2019 21:42:45 +0200 Ideenmodellierer Merge default MotionDetection
Mon, 17 Jun 2019 19:56:38 +0200 ideenmodellierer Fix misalignment of do while loop MotionDetection
Mon, 17 Jun 2019 19:53:01 +0200 ideenmodellierer Bugfix: selection of current view not working MotionDetection
Mon, 17 Jun 2019 19:47:07 +0200 ideenmodellierer Update call of motion detection function MotionDetection
Mon, 17 Jun 2019 19:46:18 +0200 ideenmodellierer Reworked detection function MotionDetection
Tue, 11 Jun 2019 05:31:07 +0200 Ideenmodellierer Parameter update MotionDetection
Tue, 11 Jun 2019 05:30:09 +0200 Ideenmodellierer Pass action to customer vie update function. MotionDetection
Fri, 24 May 2019 22:01:46 +0200 ideenmodellierer Added trigger of middle button action in case of a detected shake MotionDetection
Fri, 24 May 2019 22:00:38 +0200 ideenmodellierer Added new files for motion detection (shaking) detection MotionDetection
Sun, 24 Nov 2019 16:08:29 +0100 heinrichsweikamp Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 18:39:50 +0100 heinrichsweikamp Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 15:36:38 +0100 heinrichsweikamp Add Support for new end-2019 hardware:
Wed, 09 Oct 2019 20:05:47 +0200 heinrichsweikamp Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
Wed, 09 Oct 2019 07:08:43 +0000 heinrichsweikamp Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
Tue, 08 Oct 2019 16:41:57 +0200 Jan Mulder Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
Tue, 08 Oct 2019 16:35:45 +0200 Jan Mulder Fix merge problem fix-merge-mess
Sun, 06 Oct 2019 14:12:41 +0200 heinrichsweikamp Merge
Sun, 06 Oct 2019 11:58:36 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
Thu, 03 Oct 2019 21:39:28 +0200 ideenmodellierer Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
Thu, 03 Oct 2019 21:34:52 +0200 ideenmodellierer Minor changes to debug view FlightMode_Improvment
Thu, 03 Oct 2019 21:33:47 +0200 ideenmodellierer Added option to manually leave dive mode to system menu FlightMode_Improvment
Thu, 03 Oct 2019 21:30:16 +0200 ideenmodellierer Added function to support manuel exit of dive mode FlightMode_Improvment
Thu, 03 Oct 2019 21:26:46 +0200 ideenmodellierer Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
Tue, 01 Oct 2019 19:58:58 +0200 ideenmodellierer Removed not used wireless menu items FlightMode_Improvment
Tue, 01 Oct 2019 19:43:30 +0200 ideenmodellierer Added compile switch to enable debug view option in system menu FlightMode_Improvment
Tue, 01 Oct 2019 19:13:41 +0200 ideenmodellierer Removed averaging of pressure and temperatur values FlightMode_Improvment
Sun, 06 Oct 2019 14:07:51 +0200 heinrichsweikamp change max. allowed surface pressure to 1030hPa (As in the small OSTC)
Mon, 19 Aug 2019 11:42:31 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
Sat, 17 Aug 2019 19:03:47 +0200 ideenmodellierer Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment
Sat, 17 Aug 2019 18:57:15 +0200 ideenmodellierer Added function to avoid divemode activation during Landing: PressureMeasure_Improvment
Sat, 17 Aug 2019 18:47:08 +0200 ideenmodellierer Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment
Sat, 17 Aug 2019 18:44:43 +0200 ideenmodellierer Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment
Tue, 13 Aug 2019 21:46:26 +0200 ideenmodellierer Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment
Sun, 04 Aug 2019 11:01:06 +0200 heinrichsweikamp building a 1.5 v1.5.0 release
Sat, 20 Jul 2019 10:44:01 +0200 heinrichsweikamp add update files for testing purposes
Thu, 18 Jul 2019 14:26:56 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
Wed, 17 Jul 2019 22:43:51 +0200 ideenmodellierer Added plausibility check for pressure values I2C_Improvment
Wed, 17 Jul 2019 22:43:16 +0200 ideenmodellierer Added check of configuration. I2C_Improvment
Wed, 17 Jul 2019 22:42:55 +0200 ideenmodellierer Improved startup robustness I2C_Improvment
Wed, 17 Jul 2019 22:42:15 +0200 ideenmodellierer Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_Improvment
Wed, 17 Jul 2019 22:41:31 +0200 ideenmodellierer Deactivated internal pullups and I2C interrupt callback I2C_Improvment
Mon, 01 Jul 2019 14:18:39 +0000 heinrichsweikamp Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
Thu, 20 Jun 2019 14:24:57 +0200 Jan Mulder bugfix: implement battery at end in dive header fix-batt-1
Sun, 30 Jun 2019 22:12:15 +0200 heinrichsweikamp increase RTE to 1.9 and Firmware to 1.4.9 beta
Sun, 30 Jun 2019 19:52:46 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
Sun, 30 Jun 2019 21:25:58 +0200 ideenmodellierer Added start of frame detection for HUD data O2_SensorSync
Sun, 30 Jun 2019 21:18:05 +0200 ideenmodellierer Moved indication variable for received HUD data to tCCR file. O2_SensorSync
Wed, 19 Jun 2019 13:12:25 +0000 heinrichsweikamp Merged in janlmulder/ostc4/fix-version (pull request #27)
Wed, 19 Jun 2019 14:31:50 +0200 Jan Mulder bugfix: correct packed main version number in dive header fix-version
Wed, 19 Jun 2019 13:12:01 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
Mon, 17 Jun 2019 21:47:54 +0200 ideenmodellierer Resolved warning Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:47:33 +0200 ideenmodellierer Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:47:19 +0200 ideenmodellierer Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:46:56 +0200 ideenmodellierer Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdate
Sat, 01 Jun 2019 10:12:15 +0200 heinrichsweikamp Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
Fri, 31 May 2019 06:22:50 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
Wed, 29 May 2019 14:02:27 +0200 Jan Mulder bugfix: make stopwatch and divetime run in sync cleanup-4
Sun, 26 May 2019 10:09:22 +0200 Jan Mulder Make dive mode detection more advanced cleanup-4
Fri, 24 May 2019 09:29:29 +0200 Jan Mulder cleanup: factor out SHelper typedef (and more) cleanup-4
Fri, 24 May 2019 09:02:46 +0200 Jan Mulder cleanup: introduce function setAvgDepth cleanup-4
Wed, 22 May 2019 22:22:15 +0200 Jan Mulder cleanup: factor out unused stopwatch code cleanup-4
Wed, 22 May 2019 14:39:04 +0200 Jan Mulder bugfix, cleanup: do not clip depth to 0 cleanup-4
Tue, 21 May 2019 11:11:05 +0200 Jan Mulder bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4
Mon, 20 May 2019 13:06:02 +0200 Jan Mulder bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4
Mon, 20 May 2019 12:57:31 +0200 Jan Mulder bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4
Mon, 20 May 2019 10:13:44 +0200 Jan Mulder bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4
Mon, 20 May 2019 10:05:27 +0200 Jan Mulder cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4
Fri, 17 May 2019 21:19:04 +0200 Jan Mulder cleanup: remove commented/unused code, make static cleanup-4
Fri, 17 May 2019 06:38:56 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
Thu, 16 May 2019 14:02:46 +0200 Jan Mulder Bugfix: fix drawing of CCR bailout profile cleanup-3
Thu, 16 May 2019 08:56:15 +0200 Jan Mulder cleanup: remove unused code, make static, remove commented code cleanup-3
Thu, 16 May 2019 08:54:33 +0200 Jan Mulder Possible bugfix: do not use bitwise and (&) cleanup-3
Mon, 13 May 2019 13:37:34 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
Sun, 12 May 2019 09:45:32 +0200 Jan Mulder Added tag v1.4.8 release for changeset ba9d99a2e310 div-fixes-6
Thu, 02 May 2019 10:05:28 +0200 Jan Mulder bugfix, consistency: show deco, NDL after 1 minute div-fixes-6
Thu, 02 May 2019 09:24:54 +0200 Jan Mulder translate: nullzeit -> ndl div-fixes-6
Thu, 02 May 2019 09:16:07 +0200 Jan Mulder Deco Models: limit NDL to 240 minutes div-fixes-6
Thu, 02 May 2019 08:43:07 +0200 Jan Mulder VPM, cleanup: 1st round div-fixes-6
Mon, 29 Apr 2019 19:45:25 +0200 Jan Mulder cleanup: remove unused code div-fixes-6
Mon, 29 Apr 2019 19:43:05 +0200 Jan Mulder cleanup: no useless checks for simulator state div-fixes-6
Mon, 06 May 2019 15:45:19 +0200 heinrichsweikamp Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 release
Mon, 06 May 2019 09:00:58 +0200 heinrichsweikamp Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
Sun, 05 May 2019 11:06:02 +0200 heinrichsweikamp add update files for testing purposes
Thu, 02 May 2019 11:12:25 +0000 heinrichsweikamp Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
Thu, 02 May 2019 13:08:17 +0200 Jan Mulder Bugfix: write NDL in logbook correctly ndl-in-logbook
Wed, 01 May 2019 14:45:47 +0200 heinrichsweikamp translate some comments into english
Wed, 01 May 2019 14:39:46 +0200 heinrichsweikamp Fix typos (There are still many...)
Mon, 29 Apr 2019 19:25:24 +0200 heinrichsweikamp Make RTE show as 1.8.0 beta, add update files for testing purposes
Sun, 28 Apr 2019 17:57:39 +0200 heinrichsweikamp add update files for testing purposes
Sun, 28 Apr 2019 15:54:46 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
Sun, 28 Apr 2019 10:16:38 +0200 ideenmodellierer Rework SPI error handling. IPC_Sync_Improvment_3
Sun, 28 Apr 2019 10:06:27 +0200 ideenmodellierer Rework pressure/ temperature data aquisition IPC_Sync_Improvment_3
Sun, 28 Apr 2019 09:54:43 +0200 ideenmodellierer Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_3
Sun, 28 Apr 2019 09:41:43 +0200 heinrichsweikamp add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
Sun, 28 Apr 2019 07:05:23 +0000 heinrichsweikamp Merged in janlmulder/ostc4/write-from-sim (pull request #20)
Sat, 27 Apr 2019 12:27:46 +0200 Jan Mulder cleanup: simplify stateUsed usage write-from-sim
Sat, 27 Apr 2019 09:32:16 +0200 Jan Mulder cleanup: also write gas and setpoint changes in simulator mode write-from-sim
Wed, 24 Apr 2019 17:10:51 +0200 Jan Mulder feature, debug: make simulator write a logbook entry write-from-sim
Tue, 23 Apr 2019 21:03:24 +0200 Jan Mulder cleanup: do not pass large struct by value write-from-sim
Tue, 23 Apr 2019 17:41:20 +0200 Jan Mulder cleanup: make things static where possible. write-from-sim
Fri, 26 Apr 2019 10:36:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
Sun, 14 Apr 2019 14:27:32 +0200 ideenmodellierer Added batch to copy bins from release folder IPC_Sync_Improvment_2
Sun, 14 Apr 2019 14:22:41 +0200 ideenmodellierer Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2
Sun, 14 Apr 2019 11:43:29 +0200 ideenmodellierer Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2
Sun, 14 Apr 2019 11:38:14 +0200 ideenmodellierer Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2
Tue, 23 Apr 2019 14:21:32 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-3 (pull request #19)
Tue, 23 Apr 2019 13:05:20 +0200 Jan Mulder Bugfix: do not reset saturation on surfacing bm-3
Tue, 23 Apr 2019 09:25:18 +0200 Jan Mulder Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3
Mon, 15 Apr 2019 17:35:47 +0200 Jan Mulder feature: allow new saturation to be set in lower left corner bm-3
Fri, 12 Apr 2019 22:00:07 +0200 Jan Mulder Buehlmann: factor out another global gDecotable bm-3
Fri, 12 Apr 2019 21:04:52 +0200 Jan Mulder Buehlmann: factor out gNDL and gTTS bm-3
Fri, 12 Apr 2019 19:05:49 +0200 Jan Mulder Buehlmann: trivial performance improvement (NDL) bm-3
Fri, 12 Apr 2019 15:26:14 +0200 Jan Mulder Buehlmann: cleanup, factor out pBuDiveSettings bm-3
Fri, 12 Apr 2019 14:46:48 +0200 Jan Mulder Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3
Fri, 12 Apr 2019 10:43:52 +0200 Jan Mulder Buehlmann: cleanup, whitespace, static bm-3
Sat, 13 Apr 2019 14:36:33 +0200 heinrichsweikamp Minor: Typo fixed in bootloader screen V1.4.7 release
Fri, 12 Apr 2019 07:22:14 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-2 (pull request #17)
Thu, 11 Apr 2019 17:48:48 +0200 Jan Mulder Buelmann: new implementation for ceiling bm-2
Thu, 11 Apr 2019 10:26:22 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-1 (pull request #16)
Wed, 10 Apr 2019 17:55:46 +0200 Jan Mulder Fix stupid commit error bm-1
Tue, 09 Apr 2019 16:30:21 +0200 Jan Mulder feature: Relative GF to Saturation renames bm-1
Tue, 09 Apr 2019 15:38:31 +0200 Jan Mulder feature: replace Relative GF by saturation, computational only bm-1
Wed, 10 Apr 2019 11:04:56 +0200 heinrichsweikamp add update files for testing purposes
Tue, 09 Apr 2019 08:52:44 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
Mon, 08 Apr 2019 12:35:59 +0200 Jan Mulder debug: add SPI error counter to compass calibration div-fixes-5
Mon, 08 Apr 2019 12:02:07 +0200 Jan Mulder Comply to datasheet when resetting battery gauge registers div-fixes-5
Mon, 08 Apr 2019 11:18:40 +0200 Jan Mulder cleanup: factor out I2C1_Status() and cleanup type div-fixes-5
Mon, 08 Apr 2019 11:49:13 +0200 Jan Mulder Improvement SPI stability/recoverability div-fixes-5
Mon, 08 Apr 2019 10:35:29 +0200 Jan Mulder cleanup: factor out dataSendToSlaveStopEval div-fixes-5
Mon, 08 Apr 2019 10:16:17 +0200 Jan Mulder cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5
Sat, 06 Apr 2019 20:35:21 +0200 Jan Mulder Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5
Sat, 06 Apr 2019 09:41:14 +0200 heinrichsweikamp Minor: translating some comments and variable names into english, some cleanup in tComm.c
Sat, 06 Apr 2019 09:11:39 +0200 heinrichsweikamp add update files for testing purposes
Sat, 06 Apr 2019 07:01:21 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
Fri, 05 Apr 2019 09:12:04 +0200 Jan Mulder cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1
Wed, 03 Apr 2019 21:11:56 +0200 Jan Mulder Bugfix: make date/time setting work over reboots div-fixes-4-1
Wed, 03 Apr 2019 14:33:12 +0200 Jan Mulder cleanup: do not re-implement a standard function div-fixes-4-1
Wed, 03 Apr 2019 14:16:59 +0200 Jan Mulder cleanup: make return void when never used div-fixes-4-1
Tue, 02 Apr 2019 15:11:42 +0200 Jan Mulder cleanup: fix recent extra compiler warnings div-fixes-4-1
Tue, 02 Apr 2019 14:53:15 +0200 Jan Mulder Bugfix: set battery percentage correctly after RTE update div-fixes-4-1
Tue, 02 Apr 2019 18:18:22 +0200 heinrichsweikamp add update files for testing purposes
Mon, 01 Apr 2019 19:19:04 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
Mon, 01 Apr 2019 15:50:41 +0200 Jan Mulder cleanup: random set of cleanups div-fixes-3
Sun, 31 Mar 2019 19:35:51 +0200 Jan Mulder Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3
Sun, 31 Mar 2019 15:14:06 +0200 Jan Mulder Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3
Fri, 29 Mar 2019 14:00:43 +0100 Jan Mulder Bugfix: correct presentation error in tissues custom view div-fixes-3
Mon, 01 Apr 2019 09:01:09 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
Sun, 31 Mar 2019 15:49:47 +0200 ideenmodellierer Added schedule point for functions executed once in a second Improve_IPC_Sync
Sun, 31 Mar 2019 15:44:56 +0200 ideenmodellierer Resolved some minor warnings Improve_IPC_Sync
Sun, 31 Mar 2019 15:44:12 +0200 ideenmodellierer Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_Sync
Sun, 31 Mar 2019 15:39:44 +0200 ideenmodellierer Moved display refresh and button action function from tim callback to main loop Improve_IPC_Sync
Thu, 28 Mar 2019 13:05:29 +0000 heinrichsweikamp Merged in janlmulder/ostc4/edit-fix (pull request #11)
Thu, 28 Mar 2019 09:54:29 +0100 Jan Mulder Bugfix, trivial: correctly present avg depth in overview custom edit-fix
Thu, 28 Mar 2019 08:26:17 +0100 Jan Mulder Bugfix: handle rounding of TTS and future TTS consistently edit-fix
Wed, 27 Mar 2019 15:12:26 +0100 Jan Mulder Bugfix, trivial: do not visit 9 on first digit for setpoint edit-fix
Tue, 26 Mar 2019 22:23:26 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cv-persistent (pull request #10)
Tue, 26 Mar 2019 16:02:22 +0100 Jan Mulder New feature: do not show sensor customviews when no sensors attached cv-persistent
Tue, 26 Mar 2019 13:00:15 +0100 Jan Mulder New feature: make selected customviews persistent cv-persistent
Sun, 24 Mar 2019 22:09:37 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
Sun, 24 Mar 2019 22:57:28 +0100 ideenmodellierer Update SPI error display and handling ImprovmentSPI
Sun, 24 Mar 2019 22:53:17 +0100 ideenmodellierer Introduce scheduler function ImprovmentSPI
Sun, 24 Mar 2019 22:51:15 +0100 ideenmodellierer Moved EvaluateButton into 100ms callback ImprovmentSPI
Sun, 24 Mar 2019 22:48:49 +0100 ideenmodellierer Deleted duplicated header file (keep the one stored in common) ImprovmentSPI
Sat, 23 Mar 2019 21:35:29 +0100 ideenmodellierer Starting 'ImprovmentSPI' branch ImprovmentSPI
Sat, 23 Mar 2019 21:32:16 +0100 Ideenmodellierer merge fork
Sun, 17 Mar 2019 19:16:59 +0100 Thorsten Merged heinrichsweikamp/ostc4 into default
Sat, 16 Mar 2019 19:58:52 +0000 Thorsten Merged Cleanup_Compass_Wireless into default
Fri, 22 Mar 2019 08:15:30 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
Fri, 22 Mar 2019 08:36:39 +0100 Jan Mulder Bugfix: fix initial CNS data in the logbook header div-fixes-cleaup-2
Thu, 21 Mar 2019 15:28:47 +0100 Jan Mulder cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-2
Thu, 21 Mar 2019 11:41:59 +0100 Jan Mulder cleanup: fix (harmless) use before assign div-fixes-cleaup-2
Wed, 20 Mar 2019 16:24:10 +0100 Jan Mulder Bugfix, minor: color the overview customview correctly div-fixes-cleaup-2
Tue, 19 Mar 2019 15:43:38 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
Tue, 19 Mar 2019 11:42:00 +0100 Jan Mulder cleanup: more trivial cleanup (logbook.c/h) div-fixes-cleanup-1
Sat, 16 Mar 2019 21:52:06 +0100 Jan Mulder Bugfix: show proper dive mode div-fixes-cleanup-1
Sat, 16 Mar 2019 21:08:18 +0100 Jan Mulder cleanup: fix compiler warning div-fixes-cleanup-1
Sat, 16 Mar 2019 21:02:10 +0100 Jan Mulder cleanup: remove unused include file t9.h div-fixes-cleanup-1
Fri, 15 Mar 2019 15:48:53 +0000 heinrichsweikamp Merged in janlmulder/ostc4/avg-temp (pull request #6)
Fri, 15 Mar 2019 15:04:57 +0100 Jan Mulder Bugfix: average temperature on arrival from RTE instead of display time avg-temp
Fri, 15 Mar 2019 12:55:58 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
Fri, 15 Mar 2019 12:53:14 +0100 Jan Mulder cleanup: forgotten cleanup from 9da7dd50e2ec cleanup-2
Fri, 15 Mar 2019 12:39:28 +0100 Jan Mulder cleanup: remove obsolete code, make static, etc. cleanup-2
Fri, 15 Mar 2019 08:22:16 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
Thu, 14 Mar 2019 20:44:23 +0100 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
Thu, 14 Mar 2019 20:44:03 +0100 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
Thu, 14 Mar 2019 20:43:47 +0100 ideenmodellierer Resolve fixme comments Cleanup_Compass_Wireless
Wed, 13 Mar 2019 21:51:25 +0100 ideenmodellierer Removed not suppoted wireless feature Cleanup_Compass_Wireless
Wed, 13 Mar 2019 21:49:25 +0100 ideenmodellierer Removed not used compass code Cleanup_Compass_Wireless
Wed, 13 Mar 2019 20:53:05 +0100 ideenmodellierer Starting 'Cleanup_Compass_Wireless' branch Cleanup_Compass_Wireless
Wed, 13 Mar 2019 20:51:50 +0100 heinrichsweikamp Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
Tue, 12 Mar 2019 15:04:19 +0000 heinrichsweikamp Merged in janlmulder/ostc4/max-depth (pull request #3)
Mon, 11 Mar 2019 20:20:17 +0100 Jan Mulder cleanup: do not assign to same max-depth
Mon, 11 Mar 2019 19:57:51 +0100 Jan Mulder cleanup: remove unused code max-depth
Mon, 11 Mar 2019 19:54:20 +0100 Jan Mulder Bugfix: make max depth move with current depth (part 2) max-depth
Mon, 11 Mar 2019 19:48:57 +0100 Jan Mulder Bugfix: make max depth move with current depth (part 1) max-depth
Sun, 10 Mar 2019 20:30:42 +0100 heinrichsweikamp Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
Sun, 10 Mar 2019 15:39:55 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
Sun, 10 Mar 2019 10:46:48 +0100 Jan Mulder Fix accidentally pushed local code cleanup-1
Sun, 10 Mar 2019 10:09:58 +0100 Jan Mulder Bugfix: highlight the menu underline correctly on selected state cleanup-1
Fri, 08 Mar 2019 19:26:36 +0000 Jan Mulder Close branch linux-build. linux-build
Fri, 08 Mar 2019 13:47:52 +0100 Jan Mulder cleanup: local data and functions can be static (tMenu) cleanup-1
Thu, 07 Mar 2019 21:52:23 +0100 Jan Mulder cleanup: get rid of some compile warnings cleanup-1
Fri, 08 Mar 2019 10:31:32 +0100 heinrichsweikamp Minor: Some documentation for new hardware
Thu, 07 Mar 2019 14:15:33 +0000 heinrichsweikamp Merged in janlmulder/ostc4/linux-build (pull request #1)
Thu, 21 Feb 2019 16:56:08 +0100 Jan Mulder Add Linux pack script linux-build
Thu, 21 Feb 2019 10:29:26 +0100 Jan Mulder OSTC4pack_V4: do not hard code output filename for fonts linux-build
Thu, 21 Feb 2019 10:01:36 +0100 Jan Mulder Add missing file for self build pack tools linux-build
Thu, 07 Mar 2019 15:06:43 +0100 heinrichsweikamp Merge with FlipDisplay
Sun, 03 Mar 2019 21:13:31 +0100 Ideenmodellierer Fix for flipped display FlipDisplay
Sun, 03 Mar 2019 21:12:06 +0100 Ideenmodellierer Bugfix button translation FlipDisplay
Sun, 03 Mar 2019 19:20:18 +0100 Ideenmodellierer Binaries for beta testing FlipDisplay
Sun, 03 Mar 2019 19:18:51 +0100 Ideenmodellierer Removed special indicator for DMA transfer error FlipDisplay
Sun, 03 Mar 2019 17:46:50 +0100 Ideenmodellierer Do hard sync after communication timeout > 1 second FlipDisplay
Sun, 03 Mar 2019 17:45:39 +0100 Ideenmodellierer Keep NSS low during SPI transfer only FlipDisplay
Sun, 03 Mar 2019 12:19:47 +0100 Ideenmodellierer Added definitions for SPI sequence counter FlipDisplay
Sun, 03 Mar 2019 12:18:44 +0100 Ideenmodellierer Moved button evaluation out of interrupt handler FlipDisplay
Sun, 03 Mar 2019 12:16:54 +0100 Ideenmodellierer Bugfix ButtonResponsiveness FlipDisplay
Sat, 02 Mar 2019 17:42:51 +0100 Ideenmodellierer Place CNS and pressure within the screen (avoid clipping) FlipDisplay
Sat, 02 Mar 2019 17:42:06 +0100 Ideenmodellierer Eliminate warnings FlipDisplay
Sat, 02 Mar 2019 17:01:06 +0100 Ideenmodellierer Use SPI TX callback to synchronize to main CPU FlipDisplay
Sat, 02 Mar 2019 16:57:59 +0100 Ideenmodellierer Forward compass data during calibration mode FlipDisplay
Sat, 02 Mar 2019 16:56:58 +0100 Ideenmodellierer RTE Version 1.7 needed because of protocoll and baud rate change FlipDisplay
Thu, 28 Feb 2019 20:05:51 +0100 Ideenmodellierer Adjust voltage location FlipDisplay
Thu, 28 Feb 2019 20:05:17 +0100 Ideenmodellierer Use one global structure for schedule data FlipDisplay
Thu, 28 Feb 2019 19:38:36 +0100 Ideenmodellierer Introduced Token for SPI data exchange FlipDisplay
Thu, 28 Feb 2019 19:34:08 +0100 Ideenmodellierer Use one global structure for all schedule counters FlipDisplay
Thu, 28 Feb 2019 19:07:10 +0100 Ideenmodellierer Only use data if data frame is valid FlipDisplay
Thu, 28 Feb 2019 19:03:29 +0100 Ideenmodellierer Increase prescalar => frame takes about 4ms. FlipDisplay
Thu, 28 Feb 2019 19:02:34 +0100 Ideenmodellierer Get version from local memory instead from incoming data FlipDisplay
Sat, 23 Feb 2019 21:10:51 +0100 Ideenmodellierer Removed no longer supported scooter code FlipDisplay
Tue, 19 Feb 2019 21:48:32 +0100 Ideenmodellierer Only copy data if data connection to RTE is valid FlipDisplay
Tue, 19 Feb 2019 18:20:45 +0100 Ideenmodellierer Introduces abort of communication in case of a out of sync DMA transfer FlipDisplay
Tue, 19 Feb 2019 18:18:37 +0100 Ideenmodellierer Restore old data copy locations FlipDisplay
Tue, 19 Feb 2019 18:16:59 +0100 Ideenmodellierer Removed cyclic (by timer) send on slave side FlipDisplay
Tue, 19 Feb 2019 18:15:35 +0100 Ideenmodellierer Intoduced transfer abort function for data exchange recovery FlipDisplay
Tue, 19 Feb 2019 18:13:18 +0100 Ideenmodellierer Add compile switch to disable optimization for specific function FlipDisplay
Sun, 17 Feb 2019 21:29:38 +0100 Ideenmodellierer Update of configuration and projectfiles to support new library folder structure FlipDisplay
Sun, 17 Feb 2019 21:22:13 +0100 Ideenmodellierer Minor changes to improved code quality and to eliminate warnings FlipDisplay
Sun, 17 Feb 2019 21:14:09 +0100 Ideenmodellierer Added function to initialise structures with the actual ambient pressure FlipDisplay
Sun, 17 Feb 2019 21:12:22 +0100 Ideenmodellierer Added current STM32 standandard libraries in version independend folder structure FlipDisplay
Sun, 17 Feb 2019 21:07:35 +0100 Ideenmodellierer Drop old STM32 standard librarey files FlipDisplay
Sun, 03 Feb 2019 10:04:27 +0100 heinrichsweikamp build files kittz
Sun, 27 Jan 2019 22:21:01 +0100 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
Sun, 27 Jan 2019 22:17:16 +0100 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
Sun, 27 Jan 2019 22:01:07 +0100 Ideenmodellierer Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings) FlipDisplay
Sun, 13 Jan 2019 18:59:53 +0100 Ideenmodellierer Take care for display orientation if deleting lines FlipDisplay
Sun, 13 Jan 2019 18:58:23 +0100 Ideenmodellierer Use 32bit operations for buffer fills FlipDisplay
Tue, 08 Jan 2019 22:31:17 +0100 Ideenmodellierer Cleanup warning and disable printf calls FlipDisplay
Sun, 06 Jan 2019 22:33:26 +0100 Ideenmodellierer Cleanup writechar pointers FlipDisplay
Sun, 06 Jan 2019 22:31:45 +0100 Ideenmodellierer Enlarge text limits to get string displayed completly FlipDisplay
Sun, 06 Jan 2019 22:30:35 +0100 Ideenmodellierer Submenus may have 6 items FlipDisplay
Sun, 06 Jan 2019 22:27:46 +0100 Ideenmodellierer Added small helper for runtime evaluation FlipDisplay
Thu, 03 Jan 2019 19:59:36 +0100 Ideenmodellierer Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e FlipDisplay
Thu, 03 Jan 2019 18:35:11 +0100 Ideenmodellierer Eliminate warnings FlipDisplay
Tue, 01 Jan 2019 21:04:01 +0100 Ideenmodellierer Binaries of development snapshot FlipDisplay
Tue, 01 Jan 2019 21:03:33 +0100 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
Tue, 01 Jan 2019 21:03:10 +0100 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
Tue, 01 Jan 2019 21:02:17 +0100 Ideenmodellierer Added option to handled mirrored display to existing functions FlipDisplay
Tue, 01 Jan 2019 21:00:55 +0100 Ideenmodellierer Consider computer heading in case of a flipped display FlipDisplay
Tue, 01 Jan 2019 21:00:13 +0100 Ideenmodellierer Flip key assigment if needed FlipDisplay
Tue, 01 Jan 2019 20:59:36 +0100 Ideenmodellierer Next text ID for display flip FlipDisplay
Tue, 01 Jan 2019 20:57:41 +0100 Ideenmodellierer Starting 'FlipDisplay' branch FlipDisplay
Mon, 24 Dec 2018 16:19:09 +0300 Dmitry Romanov fix comments kittz
Mon, 24 Dec 2018 16:15:02 +0300 Dmitry Romanov Tested and alive. kittz
Wed, 28 Nov 2018 09:36:33 +0300 Dmitry Romanov Generalize TEXT of pressure unit kittz
Tue, 27 Nov 2018 18:31:21 +0100 heinrichsweikamp hPa instead of mbar, enabled Spanish language kittz
Tue, 27 Nov 2018 13:18:59 +0300 Dmitry Romanov globals kittz
Tue, 27 Nov 2018 12:59:56 +0300 Dmitry Romanov Stable.fix. kittz
Mon, 26 Nov 2018 15:25:52 +0300 Dmitry Romanov Config for debug data kittz
Mon, 26 Nov 2018 13:58:51 +0300 Dmitry Romanov +2ms delay kittz
Mon, 26 Nov 2018 13:49:02 +0300 Dmitry Romanov fix comments kittz
Mon, 26 Nov 2018 13:45:14 +0300 Dmitry Romanov Sorry. Now. kittz
Mon, 26 Nov 2018 13:42:38 +0300 Dmitry Romanov Debounce. Bounced buttons fixed. kittz
Mon, 26 Nov 2018 12:20:31 +0300 Dmitry Romanov reduce i2c speed and dutycycle for compass stability kittz
Mon, 26 Nov 2018 11:38:06 +0300 Dmitry Romanov a bit of kittz
Mon, 26 Nov 2018 10:50:39 +0300 Dmitry Romanov Stable to test. button sensitiveness fix. + global_constants. kittz
Mon, 26 Nov 2018 10:13:02 +0300 Dmitry Romanov First stable. With minimal button sensitivity fix(for broken buttons) kittz
Fri, 23 Nov 2018 18:14:56 +0300 Dmitry Romanov +- stable kittz
Fri, 23 Nov 2018 16:52:21 +0300 Dmitry Romanov temp! full cyclic SPI kittz
Thu, 22 Nov 2018 12:02:55 +0300 Dmitry Romanov revert kittz
Wed, 21 Nov 2018 13:57:58 +0300 Dmitry Romanov tmp kittz
Wed, 21 Nov 2018 13:12:44 +0300 Dmitry Romanov fix time&date after wakeup kittz
Wed, 21 Nov 2018 12:49:54 +0300 Dmitry Romanov increased interCPU baudrate, cpu2: i2c in SPI1 IRQ kittz
Wed, 21 Nov 2018 10:25:15 +0300 Dmitry Romanov Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!! kittz
Tue, 20 Nov 2018 12:27:40 +0300 Dmitry Romanov ??????? kittz
Tue, 20 Nov 2018 12:08:19 +0300 Dmitry Romanov +i2c analog noise filtering kittz
Tue, 20 Nov 2018 09:25:17 +0000 Dmitry Romanov Created new branch kittz kittz
Sat, 06 Oct 2018 15:02:11 +0200 heinrichsweikamp Added Spanish language
Thu, 04 Oct 2018 20:49:47 +0200 Ideenmodellierer Added Fontpack reference project
Thu, 04 Oct 2018 20:45:12 +0200 Ideenmodellierer Added script to pack FontPack
Thu, 04 Oct 2018 20:44:19 +0200 Ideenmodellierer Starting Firmware 1.4 the fontpack version 1.0 is needed
Thu, 04 Oct 2018 20:42:56 +0200 Ideenmodellierer Update Fontpack code to support font moved to upper memory
Thu, 04 Oct 2018 20:41:21 +0200 Ideenmodellierer Update version info
Thu, 04 Oct 2018 20:40:53 +0200 Ideenmodellierer Move font to upper memory
Thu, 04 Oct 2018 20:40:21 +0200 Ideenmodellierer Add definitions for Fonts to be placed in upper flash
Tue, 11 Sep 2018 22:16:05 +0200 heinrichsweikamp Merge
Wed, 05 Sep 2018 10:41:48 +0200 heinrichsweikamp remove wiki files from repo
Tue, 11 Sep 2018 19:29:58 +0200 heinrichsweikamp old (and new) compass support
Thu, 30 Aug 2018 21:48:21 +0200 heinrichsweikamp 1.3.8 forum release
Wed, 22 Aug 2018 18:54:01 +0200 Ideenmodellierer Update image size for 'F'ahrenheit
Wed, 22 Aug 2018 11:35:05 +0200 Ideenmodellierer Bugfix: FutureTTS and Fahrenheit not displayed correct
Wed, 15 Aug 2018 12:16:23 +0200 heinrichsweikamp language updates
Tue, 14 Aug 2018 13:53:43 +0200 heinrichsweikamp language updates
Tue, 14 Aug 2018 12:43:58 +0200 heinrichsweikamp typo in info menu...
Mon, 13 Aug 2018 19:11:14 +0200 Ideenmodellierer Replaced wait loop with delay fct
Sun, 12 Aug 2018 23:02:13 +0200 Ideenmodellierer Bugfix font elements (ue missing)
Sat, 11 Aug 2018 13:57:47 +0200 heinrichsweikamp rename update batch file
Fri, 10 Aug 2018 19:40:55 +0200 heinrichsweikamp more language updates
Fri, 10 Aug 2018 19:22:12 +0200 heinrichsweikamp language updates
Thu, 09 Aug 2018 22:39:15 +0200 Ideenmodellierer Added UTF8 decode function
Thu, 09 Aug 2018 22:38:56 +0200 Ideenmodellierer Resolve format warnings
Tue, 07 Aug 2018 17:03:36 +0200 heinrichsweikamp language updates
Tue, 07 Aug 2018 00:24:05 +0200 heinrichsweikamp Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
Sun, 05 Aug 2018 12:57:49 +0200 Ideenmodellierer Added missing ENTRY point
Sun, 05 Aug 2018 12:57:23 +0200 Ideenmodellierer Allow RTE binaries > 64k size
Sun, 05 Aug 2018 12:56:43 +0200 Ideenmodellierer Added reference projects
Tue, 31 Jul 2018 22:28:21 +0200 Ideenmodellierer Resolved warnings pointing to possible invalid memory access
Mon, 30 Jul 2018 11:37:39 +0200 heinrichsweikamp remove hgsub files
Mon, 30 Jul 2018 11:31:20 +0200 heinrichsweikamp add o4pack files
Sun, 29 Jul 2018 18:27:37 +0200 Ideenmodellierer Increased version number
Sun, 29 Jul 2018 18:16:01 +0200 Ideenmodellierer Added instruction to optimize for size
Sun, 29 Jul 2018 18:09:58 +0200 Ideenmodellierer Always include Fonts library (to have the adresses defined)
Sun, 29 Jul 2018 18:07:52 +0200 Ideenmodellierer Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
Sun, 29 Jul 2018 18:06:37 +0200 Ideenmodellierer Placed directory sections in firmware memory space
Sun, 29 Jul 2018 18:05:44 +0200 Ideenmodellierer Split memory areas and reverse engineered font library
Sun, 29 Jul 2018 16:46:31 +0200 Ideenmodellierer Force reset in case of a hard fault
Sun, 29 Jul 2018 16:45:37 +0200 Ideenmodellierer Non functional change just to use same symbols as CPU1
Sun, 29 Jul 2018 16:45:00 +0200 Ideenmodellierer Aligned structure with CPU1 linker file
Sun, 29 Jul 2018 16:17:25 +0200 Ideenmodellierer Increase version number
Sat, 28 Apr 2018 11:52:34 +0200 heinrichsweikamp include in ostc4 repository
Sat, 28 Apr 2018 11:48:39 +0200 heinrichsweikamp init
Sat, 28 Apr 2018 11:33:57 +0200 heinrichsweikamp Update author name for release
Wed, 07 Mar 2018 18:56:48 +0100 jDG ... more GPL License and general cleanups
Wed, 07 Mar 2018 17:35:35 +0100 jDG ... OpenOCD scripts to dump firmwares (not working)
Tue, 27 Feb 2018 13:57:30 +0100 jDG ... minor warnings
Sat, 10 Feb 2018 11:25:13 +0100 heinrichsweikamp change author name to heinrichs weikamp gmbh
Tue, 06 Feb 2018 16:13:30 +0100 jDG [ADD]Discovery/Src licences, plus reindentation
Tue, 23 Jan 2018 17:29:40 +0100 jDG ADD GPL License ...
Tue, 23 Jan 2018 13:36:25 +0100 jDG ADD script to set GPL headers
Wed, 10 Jan 2018 19:59:50 +0100 JeanDo ... Fighting with internal oscillator.
Wed, 10 Jan 2018 11:22:33 +0100 JeanDo ADD C indentation standard
Tue, 09 Jan 2018 18:34:03 +0100 jDG ... single step in Discovery code: trying to have an oscillator.
Wed, 03 Jan 2018 01:40:59 +0100 jdg FIX move bootloader SFirmwareData at fixed address 0x0800A000
Mon, 01 Jan 2018 20:12:34 +0100 JeanDo ADD font check code that runs at FontPack installation.
Mon, 01 Jan 2018 18:56:14 +0100 JeanDo ADD missing chars in FontPack
Mon, 01 Jan 2018 18:55:12 +0100 JeanDo FIX need to link actual FirmwareData too...
Mon, 01 Jan 2018 18:24:07 +0100 JeanDo FIX shared SFirmwareData signature at fixed address
Sat, 30 Dec 2017 20:24:04 +0100 jdg NEW shared font directory at 0x081E0000
Tue, 26 Dec 2017 19:31:13 +0100 jdg ... more docs
Tue, 26 Dec 2017 18:26:12 +0100 jdg ... typo in subrepo ?
Tue, 26 Dec 2017 18:24:03 +0100 jdg ADD wiki sub-repos
Tue, 26 Dec 2017 18:22:49 +0100 jdg ... FontPack CPU1 project
Tue, 19 Dec 2017 23:42:13 +0100 JeanDo FIRST CPU2-RTE LINKING VERSION
Tue, 19 Dec 2017 18:47:04 +0100 JeanDo FIX move fonts to UPPER ROM SECTION (above 0x8100000)
Tue, 19 Dec 2017 18:45:03 +0100 JeanDo ADD CPU1 pin layout
Tue, 19 Dec 2017 13:45:03 +0100 jDG FIRST CPU1-DISCOVERY LINKING VERSION
Tue, 19 Dec 2017 11:19:35 +0100 jDG CLEANUP move driver code to Common/Drivers
Mon, 18 Dec 2017 18:16:28 +0100 JeanDo FIX text_multilanguage shall be compiled once
Mon, 18 Dec 2017 17:08:23 +0100 JeanDo FIX recover jeopardized fonts & images structure
Mon, 18 Dec 2017 14:30:14 +0100 jDG ... move absolute data to named sections
Mon, 18 Dec 2017 14:03:55 +0100 jDG CLEAN retrieve original startup code. reset linker script.
Fri, 15 Dec 2017 02:06:18 +0100 JeanDo ... more clean
Fri, 15 Dec 2017 01:45:20 +0100 JeanDo MOVE files for other applications
Wed, 13 Dec 2017 18:23:00 +0100 jDG ... debugging Discovery project compilation.
Wed, 13 Dec 2017 13:30:13 +0100 jDG CLEANUP remove duplicated support sources
Wed, 13 Dec 2017 13:05:12 +0100 jDG CLEANUP make svn: subdirectories windows and macos compatibles
Tue, 12 Dec 2017 18:53:53 +0100 jDG Add chip documentations
Tue, 12 Dec 2017 17:36:20 +0100 jDG ADD sub repositories
less more | rev 927: (0) tip