log

age author description
2022-11-20 Ideenmodellierer Added new info page for extended sensor data:
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Bugfix PSCR menu button label:
2022-11-08 Ideenmodellierer Development bugfix number of spare bytes in setting structure
2022-11-08 Ideenmodellierer Extension scrubber time:
2022-11-08 Ideenmodellierer Bugfix compass bearing:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
2022-11-01 Ideenmodellierer Bugfix release frame:
2022-10-28 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
2022-10-28 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
2022-10-28 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
2022-10-28 Ideenmodellierer Bugfix display of deactivated sensors:
2022-10-18 Ideenmodellierer Bugfix motioncontrol frame deactivation:
2022-10-18 Ideenmodellierer Cleanup warnings:
2022-09-25 Ideenmodellierer Bugfix Empty menu:
2022-09-25 Ideenmodellierer Improvment key event detection:
2022-08-19 heinrichsweikamp Merge
2022-08-19 heinrichsweikamp 1.6.0 release Betatest
2022-08-06 heinrichsweikamp Update current build for testing Betatest
2022-08-05 Ideenmodellierer Improvment charge percent visualization: Betatest
2022-08-05 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
2022-08-05 Ideenmodellierer Improvment external interface usage: Betatest
2022-08-05 Ideenmodellierer Added Sentinel protocoll support: Betatest
2022-08-05 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
2022-08-05 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
2022-08-05 Ideenmodellierer Increased version numbers: Betatest
2022-08-05 Ideenmodellierer Bugfix Battery charge complete event: Betatest
2022-08-03 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
2022-06-02 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
2022-05-16 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
2022-04-25 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
2022-04-25 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
2022-04-25 Ideenmodellierer Bugfix visualization better setpoint: Betatest
2022-04-22 Jan Mulder cleanup: Use correct "per" symbol Betatest
2022-04-21 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
2022-04-20 Jan Mulder Move include file to common to ... Betatest
2021-11-22 Jan Mulder Allow longer scrubber time Betatest
2022-03-30 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
2022-03-30 heinrichsweikamp Zusammenf?hren Betatest
2022-03-30 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
2022-03-12 Ideenmodellierer Added Charging view: Betatest
2022-03-12 Ideenmodellierer Support of unknown charging counter values: Betatest
2022-03-12 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Increased version number Betatest
2022-03-12 heinrichsweikamp increase version numbers for upcomming release Betatest
2021-12-24 heinrichsweikamp update test build Betatest
2021-12-21 Ideenmodellierer Stability improvment bluetooth startup: Betatest
2021-12-21 Ideenmodellierer Revert Setbluetooh name changes Betatest
2021-12-14 heinrichs weikamp PSCR Mode Betatest
2021-11-01 heinrichs weikamp Undo Rev. 660
2021-08-08 heinrichsweikamp Add option to reset bluetooth name
2021-04-28 heinrichs weikamp Update build file for testing
2021-04-27 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
2021-04-26 heinrichs weikamp Update release date
2021-04-25 Ideenmodellierer Added visualization of scrubber time:
2021-04-25 Ideenmodellierer Added count down timer for scrubber time:
2021-04-25 Ideenmodellierer Introduced new menu tab for addition CCR options:
2021-04-25 Ideenmodellierer Bugfix temperature display Logpage2:
2021-04-19 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
2021-04-19 Ideenmodellierer Automatik setpoint change:
2021-04-19 Ideenmodellierer Automatik setpoint change:
2021-04-19 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
2021-04-19 Ideenmodellierer Motion detection: Enable focus after focus calibration:
2021-04-13 Ideenmodellierer Integrated selection of bailout in the diluent selection page:
2021-04-13 Ideenmodellierer Remove battery charge counter from information menu:
2021-04-13 Ideenmodellierer Small changes in charger state handling:
2021-03-30 heinrichs weikamp Compile with ENABLE_CHARGER_STATUS_V2
2021-03-24 Ideenmodellierer Reimplemented charger status generation (deactivated):
2021-03-24 Ideenmodellierer Do not show focus indicator in case motion detection is suspended:
2021-03-11 Ideenmodellierer Development Bugfix Deco bars not shown after last deco stop passed:
2021-03-11 Ideenmodellierer Development bugfix Viewport settings:
2021-02-25 heinrichsweikamp add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
2021-02-24 Ideenmodellierer Added last measured PPO2 value to sensor selection dialog:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Enable sensor check for Analog PPO2 mode:
2021-02-23 Ideenmodellierer Added menu structure to allow ppo2 modification in simulator mode:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Added functionality to add ppo2 mV offset:
2021-02-12 Ideenmodellierer Added compile switch for T3_PROFILE menu operation option
2021-02-12 Ideenmodellierer Improve in / out of focus transitions:
2021-02-12 Ideenmodellierer Added option to select sensitivity of focus detection:
2021-02-08 Ideenmodellierer Switch Sector / Scroll detection to vector implementation:
2021-02-07 Ideenmodellierer Development bugfix: Marker in standard t3 view drawn in wrong direction
2021-02-07 Ideenmodellierer Improvment frame Handling:
2021-02-03 Ideenmodellierer Adjustments for flipped display view:
2021-02-03 Ideenmodellierer Use roll and pitch agles in 0-360 format:
2021-01-27 Ideenmodellierer Added minilog functions to allow marker synchronisation:
2021-01-27 Ideenmodellierer Added t3 quick menu for marker synchronisation:
2021-01-27 Ideenmodellierer Development bugfix: focus state not remembered:
2021-01-27 Ideenmodellierer Development bugfix: Low battery warning was interpretated as marker:
2021-01-27 Ideenmodellierer Development bugfix: show replay symbol only for the selected dive:
2021-01-27 Ideenmodellierer Moved non critical functions from timer interrupt to main loop:
2021-01-20 Ideenmodellierer Added "Set Marker" to T3 quick menu:
2021-01-15 Ideenmodellierer Added "Set Marker" to T3 quick menu:
2021-01-15 Ideenmodellierer Bugfix inverted whitspace:
2021-01-14 Ideenmodellierer Suspend MotionDetection events while diver is operationg the OSTC:
2021-01-14 Ideenmodellierer Added access to logbook marker data:
2021-01-14 Ideenmodellierer Bugfix: CalibViewport were shown even in case the compile switch had not been set:
2021-02-05 heinrichsweikamp Update RTE required value for release
2021-02-05 heinrichsweikamp Added tag v1.5.6 release for changeset 06ec1da5e105
2021-02-05 heinrichsweikamp 1.5.6 release v1.5.6 release
2021-01-07 heinrichsweikamp change O2_CALIB_FRACTION_O2 to 0.98
2021-01-06 Ideenmodellierer Merged menu items of viewport and motion control:
2021-01-06 Ideenmodellierer T3 profile view: Added visualization of deco data
2021-01-05 Ideenmodellierer Added replay data scaling in case life data is longer than replay block
2021-01-04 Ideenmodellierer Bugfix T3 skip deactivated views:
2021-01-04 Ideenmodellierer Added compile switch for new T3 View Profile
2021-01-04 Ideenmodellierer Bugfix T3 skip deactivated views:
2021-01-04 Ideenmodellierer New replay block for T3 profile:
2021-01-04 Ideenmodellierer MotionControl-Sector: Map sectors during switch T7 <=> T3:
2021-01-04 Ideenmodellierer Added functionality to select a dive to be shown in the T3 profile view:
2021-01-04 Ideenmodellierer Bugfix Selection of primary view:
2021-01-04 Ideenmodellierer Added compile switch for new T3 View Profile
2021-01-04 Ideenmodellierer Added PrintGraph option to skip invalid data entries:
2021-01-03 Ideenmodellierer MotionCtrl - Sectorview Map sectors directly to custom views:
2021-01-06 heinrichsweikamp Minor: Comment translation into English
2020-12-22 Ideenmodellierer Align VPM tag in log list to be at same position as GF tag:
2020-12-17 heinrichsweikamp Minor: Update the documentation for building the code
2020-12-17 heinrichsweikamp Update current build, "RTErequired" value and release date
2020-12-16 heinrichsweikamp update ostc4pack sample files
2020-12-13 Ideenmodellierer Motion control: Jump back to primary view if focus is lost:
2020-12-13 Ideenmodellierer Reduced view angle and number of vusiualized custom views in setor mode:
2020-12-12 Ideenmodellierer Added option for 100% o2 calibration:
2020-12-12 Ideenmodellierer Solved minor warnings
2020-12-12 Ideenmodellierer Show Fallback if no valid sensor value is available:
2020-12-12 Ideenmodellierer Added ex Interface measurement restart in case of i2c disturbance:
2020-12-12 Ideenmodellierer Bugfix bad resolution of compass LSM303AGR:
2020-12-03 heinrichsweikamp Minor: Functional inert cleanup of some unused variables
2020-11-29 Ideenmodellierer Rework pitch detection:
2020-11-29 Ideenmodellierer Handle o2 voltage values < 0.5mV as invalid:
2020-11-29 Ideenmodellierer Return to o2 values:
2020-11-29 Ideenmodellierer Change style of viewport calibration menu:
2020-11-25 Ideenmodellierer Improved focus detection:
2020-11-25 Ideenmodellierer Update String "Blickwinkel":
2020-11-25 Ideenmodellierer Added debug view to viewport calibration:
2020-11-25 Ideenmodellierer Reactivate compass parameter stored in NVM:
2020-11-30 Ideenmodellierer Try to reduce legth of log entry string:
2020-11-30 Ideenmodellierer Added new section "lower.font":
2020-11-29 heinrichsweikamp Minor: Update the documentation for building the code
2020-11-24 izzni -Add 12HR Time Support
2020-11-21 heinrichsweikamp add current build
2020-11-15 Ideenmodellierer Bugfix center / right alignment if dualfont is used:
2020-11-15 Ideenmodellierer Bugfix One or more deactivated sensors hide sensor display:
2020-11-15 Ideenmodellierer Refine o2 sensor diagnostic functions:
2020-11-15 Ideenmodellierer Added ADC sensor interface to O2 sensore menu structure:
2020-11-15 Ideenmodellierer Solved minor warnings
2020-11-15 Ideenmodellierer Added O2 sensor source and calibration parameters to setting structure
2020-11-15 Ideenmodellierer Check if HW evaluation was performed:
2020-11-12 Ideenmodellierer Changed operation mode of RecoverSampleIndex:
2020-11-12 Ideenmodellierer Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
2020-11-12 Ideenmodellierer Switch source of o2 sensor data depending on availability of external ADC:
2020-11-12 Ideenmodellierer Added HW_Info to Discovery <=> RTE data exchange:
2020-11-12 Ideenmodellierer Added external ADC interface functionality (MCP3424):
2020-11-08 Ideenmodellierer Added color indicator for focus state:
2020-11-08 Ideenmodellierer Added menu structure to acces viewport calibration:
2020-11-08 Ideenmodellierer Added viewport functionality:
2020-11-08 Ideenmodellierer Make sure motion detection settings are set to default values:
2020-11-08 Ideenmodellierer Only execute motion detection functions if features is enabled:
2020-11-08 Ideenmodellierer Update roll and pitch value in simulation mode:
2020-11-02 Ideenmodellierer Added viewport calibration to dive menu:
2020-11-02 Ideenmodellierer Added new settings for Viewport:
2020-11-03 heinrichsweikamp Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
2020-11-02 heinrichsweikamp add current build
2020-10-11 Ideenmodellierer Shortend t3 view names:
2020-10-10 Ideenmodellierer Added new t3 view showing first deco stop and tts in parallel:
2020-10-10 Ideenmodellierer Added default view selection and auto return to view to t3 visualization:
2020-10-10 Ideenmodellierer Bugfix return from submenu in t3 view:
2020-10-10 Ideenmodellierer Added inertia simulation for compass heading:
2020-10-10 Ideenmodellierer BugFix firmware downgrade to version with less settings:
2020-10-07 Ideenmodellierer Added center / right alignment option to custom text display:
2020-10-07 Ideenmodellierer Changed visualization of Depth / temperatur / debugview entry
2020-10-07 Ideenmodellierer Increased max value for surface pressure:
2020-10-04 heinrichsweikamp Added tag 1.5.5 release for changeset 02e7e11fdbe8
2020-09-25 heinrichsweikamp increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
2020-09-16 heinrichsweikamp add current build
2020-09-15 Ideenmodellierer Bugfix custom view selection dialog:
2020-09-15 Ideenmodellierer Bugfix: No need to consider surface custom view in count of enabled view:
2020-09-15 Ideenmodellierer Added skip condition in custom view selection:
2020-09-13 Ideenmodellierer Added new option to gas configuration: "Off":
2020-09-13 Ideenmodellierer Do not show gases in "Off" state in custom gas list:
2020-09-13 Ideenmodellierer Added new option to gas configuration: "Off":
2020-09-13 Ideenmodellierer Change color ID used in strings for light grey:
2020-09-13 Ideenmodellierer Minor: Removed duplicated definition of number of available gases
2020-09-10 Ideenmodellierer Changed string for data view selections:
2020-09-10 Ideenmodellierer Added compile switch for motion control:
2020-09-10 Ideenmodellierer Move Bigfont and motion Ctrl selection menu out of custom view submenu:
2020-09-08 Ideenmodellierer Moved custom view menu to new tab:
2020-09-06 Ideenmodellierer Reset Safety Stop display in case of a new descend:
2020-09-06 Ideenmodellierer Added T3_gaslist:
2020-09-06 Ideenmodellierer Added color coding for cv gas list:
2020-09-06 Ideenmodellierer Added quick menu function to big font view:
2020-09-06 Ideenmodellierer Added missing display of button labels in refresh function:
2020-09-16 heinrichsweikamp Properly send compass 3 into sleepmode (end-2019 hardware)
2020-08-31 heinrichsweikamp Merge
2020-08-30 Ideenmodellierer Added new strings for the selection of T3 custom views
2020-08-30 Ideenmodellierer Minor adaptions in page layout:
2020-08-30 Ideenmodellierer Display warning in t7 using centered strings
2020-08-30 Ideenmodellierer Show page number in small letters if more than 8 tabs are active
2020-08-30 Ideenmodellierer Reimplementation of tMenuEdit_select:
2020-08-30 Ideenmodellierer Added new menu tab into call structure
2020-08-30 Ideenmodellierer Added new top level menu for customization of views
2020-08-30 Ideenmodellierer Removed second big font profile
2020-08-24 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix right alignment of dualfont strings
2020-08-24 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-24 Ideenmodellierer Added compile switch to enable / disable new BigFont layout
2020-08-24 Ideenmodellierer Added dew parameter to enable selection of customer BigFont screens to be displayed
2020-08-24 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix right alignment of dualfont strings
2020-08-24 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-20 Ideenmodellierer Added compiler switch for existing debug view parameter
2020-08-10 heinrichsweikamp Added tag v1.5.4 release for changeset e9ca66ce36e5
2020-07-22 heinrichsweikamp 1.5.4 release v1.5.4 release
2020-06-29 heinrichsweikamp add wiki sub-directory
2020-06-27 heinrichsweikamp Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
2020-05-26 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
2020-05-26 ideenmodellierer Bugfix header EEPROM layout: FixLayout_Header_LogView
2020-05-26 ideenmodellierer Bugfix right alignment of string: FixLayout_Header_LogView
2020-05-26 ideenmodellierer Small corrections layout Divelog page 1: FixLayout_Header_LogView
2020-05-26 ideenmodellierer Development option only read bottledata: FixLayout_Header_LogView
2020-05-19 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
2020-05-18 ideenmodellierer Bugfix calculation of string center position: Improve_Button_Sleep
2020-05-13 ideenmodellierer Code cleanup pressure plausibility check: Improve_Button_Sleep
2020-05-13 ideenmodellierer Bugfix unintended else condition: Improve_Button_Sleep
2020-05-12 ideenmodellierer Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep
2020-05-12 ideenmodellierer Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep
2020-05-12 ideenmodellierer Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep
2020-05-12 ideenmodellierer Changed default values: Improve_Button_Sleep
2020-05-12 ideenmodellierer Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep
2020-05-12 ideenmodellierer Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep
2020-04-28 heinrichsweikamp Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
2020-04-22 Jan Mulder bugfix: implement battery charge percentage in dive header fix-bat-2
2020-04-15 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
2020-04-14 ideenmodellierer Removed no longer needed reset profile function: Improve_Logtansfer
2020-04-14 ideenmodellierer Moved and deactivated analyse sample buffer switch: Improve_Logtansfer
2020-04-14 ideenmodellierer Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer
2020-04-14 ideenmodellierer Removed invalidate header function because it is no lonnger needed Improve_Logtansfer
2020-04-14 ideenmodellierer Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer
2020-04-13 ideenmodellierer Added compile switch to handle additional data during raw header request: Improve_Logtansfer
2020-04-12 ideenmodellierer Added function to transfer sample buffer: Improve_Logtansfer
2020-04-08 heinrichsweikamp Power-down Bluetooth on COMM exit
2020-03-30 heinrichsweikamp Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
2020-03-29 Ideenmodellierer merged default into minor_improvments minor_improvments
2020-03-29 ideenmodellierer Activated reset of sample information within header data at time of sector erasing: minor_improvments
2020-03-28 ideenmodellierer Added ppO2 to dummy profile data: minor_improvments
2020-03-24 ideenmodellierer Eliminated some minor warnings minor_improvments
2020-03-24 ideenmodellierer Transfer a dummy profile in case of missing sample information: minor_improvments
2020-03-24 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
2020-03-24 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
2020-03-24 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24 ideenmodellierer Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
2020-03-24 ideenmodellierer Added new compile switches for variants: minor_improvments
2020-03-23 ideenmodellierer Added initialization of bottle sensor data age counter minor_improvments
2020-03-23 ideenmodellierer Added compile switch to show voltage parallel to charge status percantage minor_improvments
2020-03-23 ideenmodellierer Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
2020-03-05 ideenmodellierer Introduced configuration header for variant managment: minor_improvments
2020-03-05 ideenmodellierer Removed duplicated definition: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-03-01 heinrichsweikamp fix potential issue with >255 dives in the logbook
2020-02-27 heinrichsweikamp Added tag v1.5.3 release for changeset 5b4c78c36b04
2020-02-27 heinrichsweikamp 1.5.3 release v1.5.3 release
2020-02-24 heinrichsweikamp update the 1.5.3 for tests
2020-02-24 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
2020-02-23 ideenmodellierer Moved power on detection to RTE: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Reduced timeout for common UART communication: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Detect startup after power off: Improve_BatteryGasGauge
2020-02-18 heinrichsweikamp show battery percent and voltage and surfacemode. That gives additional
2020-02-18 heinrichsweikamp make a 1.5.3 for tests
2020-02-18 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
2020-02-17 ideenmodellierer Marked possible code improvment for future activities: ImprovmentNVM_2
2020-02-17 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-16 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2
2020-02-10 ideenmodellierer ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2
2020-02-10 ideenmodellierer Moved Timeout handling out of 100ms callback: ImprovmentNVM_2
2020-02-10 ideenmodellierer Enable sequentionel writing of device data: ImprovmentNVM_2
2020-02-10 ideenmodellierer Optimize ef_write_block function: ImprovmentNVM_2
2020-02-10 heinrichsweikamp Merged in janlmulder/ostc4/maintain-2 (pull request #38)
2020-02-07 Jan Mulder Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
2020-01-15 heinrichsweikamp 1.5.2 beta with RTE 2.02 v1.5.2.beta release
2020-01-15 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
2020-01-14 Ideenmodellierer merged default into Improvment_NVM Improment_NVM
2020-01-14 ideenmodellierer Added compile switch for restoring of last known date after power lost: Improment_NVM
2020-01-14 ideenmodellierer Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
2020-01-14 ideenmodellierer Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
2020-01-13 ideenmodellierer Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
2020-01-12 ideenmodellierer Bugfix display compass calibration frozen: Improment_NVM
2020-01-12 ideenmodellierer Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
2020-01-12 ideenmodellierer Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
2020-01-12 ideenmodellierer Bugfix parallel call of external flash functions: Improment_NVM
2020-01-12 ideenmodellierer Bugfix Min max values for device data checks: Improment_NVM
2020-01-12 ideenmodellierer Bugfix Display of Sensor values: Improment_NVM
2020-01-12 ideenmodellierer Bugfix: display of time of minimum voltag: Improment_NVM
2020-01-08 heinrichsweikamp We got one report of false/freezd depth reading when jumping into 2m depth
2020-01-05 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
2019-12-29 Ideenmodellierer merged default into ImproveBluetooth ImproveBluetooth
2019-12-28 ideenmodellierer Added retry through power off/on cycle: ImproveBluetooth
2019-12-21 ideenmodellierer Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
2019-12-02 ideenmodellierer Bugfix: Merge / cleanup problem: ImproveBluetooth
2019-12-01 ideenmodellierer Added missing enum for configuration states ImproveBluetooth
2019-11-26 ideenmodellierer Added function for BlueMod configuration: ImproveBluetooth
2019-11-26 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26 ideenmodellierer Configurate FlowCntrl Pins as noPull ImproveBluetooth
2019-11-26 ideenmodellierer Bugfix negativ ascend bar: ImproveBluetooth
2019-11-26 ideenmodellierer Move Constants and libm to start of firmware ROM block: ImproveBluetooth
2019-12-02 heinrichsweikamp Merged in janlmulder/ostc4/maintain-1 (pull request #35)
2019-12-01 Jan Mulder Fix case for case sensitive OS maintain-1
2019-12-01 Jan Mulder Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
2019-11-24 heinrichsweikamp Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
2019-10-21 ideenmodellierer Added key direction awarness to t3, t5 and t6 views: MotionDetection
2019-10-21 ideenmodellierer Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
2019-10-17 ideenmodellierer Consider number of available t3 views in sector handling: MotionDetection
2019-10-17 ideenmodellierer Combine variables in a structure to improve readability of code MotionDetection
2019-10-10 Ideenmodellierer merge default MotionDetection
2019-10-10 ideenmodellierer Simplified pitch detection state machine: MotionDetection
2019-10-10 ideenmodellierer Minor code cleanup MotionDetection
2019-09-16 ideenmodellierer Added missing customerview selection MotionDetection
2019-09-16 ideenmodellierer Incremented "idle window" for scroll detection MotionDetection
2019-09-16 ideenmodellierer Motion events effect custom view in dive mode only MotionDetection
2019-09-16 ideenmodellierer Added string for Empty/ Debug custom view selection MotionDetection
2019-09-10 ideenmodellierer Use Enum values for initialization and setting check: MotionDetection
2019-09-08 ideenmodellierer Removed some warnings MotionDetection
2019-09-08 ideenmodellierer Add scroll event by pitch angle detection: MotionDetection
2019-08-19 Ideenmodellierer merged default into MotionDetection MotionDetection
2019-08-19 ideenmodellierer Added parameter for number of sectors to be defined MotionDetection
2019-08-13 ideenmodellierer Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
2019-08-13 ideenmodellierer Added a function to count the active custom views. MotionDetection
2019-08-13 ideenmodellierer Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
2019-07-20 Ideenmodellierer Merge default MotionDetection
2019-06-17 ideenmodellierer Fix misalignment of do while loop MotionDetection
2019-06-17 ideenmodellierer Bugfix: selection of current view not working MotionDetection
2019-06-17 ideenmodellierer Update call of motion detection function MotionDetection
2019-06-17 ideenmodellierer Reworked detection function MotionDetection
2019-06-11 Ideenmodellierer Parameter update MotionDetection
2019-06-11 Ideenmodellierer Pass action to customer vie update function. MotionDetection
2019-05-24 ideenmodellierer Added trigger of middle button action in case of a detected shake MotionDetection
2019-05-24 ideenmodellierer Added new files for motion detection (shaking) detection MotionDetection
2019-11-24 heinrichsweikamp Add Support for new end-2019 hardware:
2019-11-23 heinrichsweikamp Add Support for new end-2019 hardware:
2019-11-23 heinrichsweikamp Add Support for new end-2019 hardware:
2019-10-09 heinrichsweikamp Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
2019-10-09 heinrichsweikamp Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
2019-10-08 Jan Mulder Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
2019-10-08 Jan Mulder Fix merge problem fix-merge-mess
2019-10-06 heinrichsweikamp Merge
2019-10-06 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
2019-10-03 ideenmodellierer Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
2019-10-03 ideenmodellierer Minor changes to debug view FlightMode_Improvment
2019-10-03 ideenmodellierer Added option to manually leave dive mode to system menu FlightMode_Improvment
2019-10-03 ideenmodellierer Added function to support manuel exit of dive mode FlightMode_Improvment
2019-10-03 ideenmodellierer Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
2019-10-01 ideenmodellierer Removed not used wireless menu items FlightMode_Improvment
2019-10-01 ideenmodellierer Added compile switch to enable debug view option in system menu FlightMode_Improvment
2019-10-01 ideenmodellierer Removed averaging of pressure and temperatur values FlightMode_Improvment
2019-10-06 heinrichsweikamp change max. allowed surface pressure to 1030hPa (As in the small OSTC)
2019-08-19 heinrichsweikamp Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
2019-08-17 ideenmodellierer Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment
2019-08-17 ideenmodellierer Added function to avoid divemode activation during Landing: PressureMeasure_Improvment
2019-08-17 ideenmodellierer Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment
2019-08-17 ideenmodellierer Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment
2019-08-13 ideenmodellierer Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment
2019-08-04 heinrichsweikamp building a 1.5 v1.5.0 release
2019-07-20 heinrichsweikamp add update files for testing purposes
2019-07-18 heinrichsweikamp Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
2019-07-17 ideenmodellierer Added plausibility check for pressure values I2C_Improvment
2019-07-17 ideenmodellierer Added check of configuration. I2C_Improvment
2019-07-17 ideenmodellierer Improved startup robustness I2C_Improvment
2019-07-17 ideenmodellierer Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_Improvment
2019-07-17 ideenmodellierer Deactivated internal pullups and I2C interrupt callback I2C_Improvment
2019-07-01 heinrichsweikamp Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
2019-06-20 Jan Mulder bugfix: implement battery at end in dive header fix-batt-1
2019-06-30 heinrichsweikamp increase RTE to 1.9 and Firmware to 1.4.9 beta
2019-06-30 heinrichsweikamp Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
2019-06-30 ideenmodellierer Added start of frame detection for HUD data O2_SensorSync
2019-06-30 ideenmodellierer Moved indication variable for received HUD data to tCCR file. O2_SensorSync
2019-06-19 heinrichsweikamp Merged in janlmulder/ostc4/fix-version (pull request #27)
2019-06-19 Jan Mulder bugfix: correct packed main version number in dive header fix-version
2019-06-19 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
2019-06-17 ideenmodellierer Resolved warning Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdate
2019-06-01 heinrichsweikamp Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
2019-05-31 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
2019-05-29 Jan Mulder bugfix: make stopwatch and divetime run in sync cleanup-4
2019-05-26 Jan Mulder Make dive mode detection more advanced cleanup-4
2019-05-24 Jan Mulder cleanup: factor out SHelper typedef (and more) cleanup-4
2019-05-24 Jan Mulder cleanup: introduce function setAvgDepth cleanup-4
2019-05-22 Jan Mulder cleanup: factor out unused stopwatch code cleanup-4
2019-05-22 Jan Mulder bugfix, cleanup: do not clip depth to 0 cleanup-4
2019-05-21 Jan Mulder bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4
2019-05-20 Jan Mulder bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4
2019-05-20 Jan Mulder bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4
2019-05-20 Jan Mulder bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4
2019-05-20 Jan Mulder cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4
2019-05-17 Jan Mulder cleanup: remove commented/unused code, make static cleanup-4
2019-05-17 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
2019-05-16 Jan Mulder Bugfix: fix drawing of CCR bailout profile cleanup-3
2019-05-16 Jan Mulder cleanup: remove unused code, make static, remove commented code cleanup-3
2019-05-16 Jan Mulder Possible bugfix: do not use bitwise and (&) cleanup-3
2019-05-13 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
2019-05-12 Jan Mulder Added tag v1.4.8 release for changeset ba9d99a2e310 div-fixes-6
2019-05-02 Jan Mulder bugfix, consistency: show deco, NDL after 1 minute div-fixes-6
2019-05-02 Jan Mulder translate: nullzeit -> ndl div-fixes-6
2019-05-02 Jan Mulder Deco Models: limit NDL to 240 minutes div-fixes-6
2019-05-02 Jan Mulder VPM, cleanup: 1st round div-fixes-6
2019-04-29 Jan Mulder cleanup: remove unused code div-fixes-6
2019-04-29 Jan Mulder cleanup: no useless checks for simulator state div-fixes-6
2019-05-06 heinrichsweikamp Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 release
2019-05-06 heinrichsweikamp Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
2019-05-05 heinrichsweikamp add update files for testing purposes
2019-05-02 heinrichsweikamp Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
2019-05-02 Jan Mulder Bugfix: write NDL in logbook correctly ndl-in-logbook
2019-05-01 heinrichsweikamp translate some comments into english
2019-05-01 heinrichsweikamp Fix typos (There are still many...)
2019-04-29 heinrichsweikamp Make RTE show as 1.8.0 beta, add update files for testing purposes
2019-04-28 heinrichsweikamp add update files for testing purposes
2019-04-28 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
2019-04-28 ideenmodellierer Rework SPI error handling. IPC_Sync_Improvment_3
2019-04-28 ideenmodellierer Rework pressure/ temperature data aquisition IPC_Sync_Improvment_3
2019-04-28 ideenmodellierer Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_3
2019-04-28 heinrichsweikamp add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
2019-04-28 heinrichsweikamp Merged in janlmulder/ostc4/write-from-sim (pull request #20)
2019-04-27 Jan Mulder cleanup: simplify stateUsed usage write-from-sim
2019-04-27 Jan Mulder cleanup: also write gas and setpoint changes in simulator mode write-from-sim
2019-04-24 Jan Mulder feature, debug: make simulator write a logbook entry write-from-sim
2019-04-23 Jan Mulder cleanup: do not pass large struct by value write-from-sim
2019-04-23 Jan Mulder cleanup: make things static where possible. write-from-sim
2019-04-26 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
2019-04-14 ideenmodellierer Added batch to copy bins from release folder IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2
2019-04-23 heinrichsweikamp Merged in janlmulder/ostc4/bm-3 (pull request #19)
2019-04-23 Jan Mulder Bugfix: do not reset saturation on surfacing bm-3
2019-04-23 Jan Mulder Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3
2019-04-15 Jan Mulder feature: allow new saturation to be set in lower left corner bm-3
2019-04-12 Jan Mulder Buehlmann: factor out another global gDecotable bm-3
2019-04-12 Jan Mulder Buehlmann: factor out gNDL and gTTS bm-3
2019-04-12 Jan Mulder Buehlmann: trivial performance improvement (NDL) bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, factor out pBuDiveSettings bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, whitespace, static bm-3
2019-04-13 heinrichsweikamp Minor: Typo fixed in bootloader screen V1.4.7 release
2019-04-12 heinrichsweikamp Merged in janlmulder/ostc4/bm-2 (pull request #17)
2019-04-11 Jan Mulder Buelmann: new implementation for ceiling bm-2
2019-04-11 heinrichsweikamp Merged in janlmulder/ostc4/bm-1 (pull request #16)
2019-04-10 Jan Mulder Fix stupid commit error bm-1
2019-04-09 Jan Mulder feature: Relative GF to Saturation renames bm-1
2019-04-09 Jan Mulder feature: replace Relative GF by saturation, computational only bm-1
2019-04-10 heinrichsweikamp add update files for testing purposes
2019-04-09 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
2019-04-08 Jan Mulder debug: add SPI error counter to compass calibration div-fixes-5
2019-04-08 Jan Mulder Comply to datasheet when resetting battery gauge registers div-fixes-5
2019-04-08 Jan Mulder cleanup: factor out I2C1_Status() and cleanup type div-fixes-5
2019-04-08 Jan Mulder Improvement SPI stability/recoverability div-fixes-5
2019-04-08 Jan Mulder cleanup: factor out dataSendToSlaveStopEval div-fixes-5
2019-04-08 Jan Mulder cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5
2019-04-06 Jan Mulder Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5
2019-04-06 heinrichsweikamp Minor: translating some comments and variable names into english, some cleanup in tComm.c
2019-04-06 heinrichsweikamp add update files for testing purposes
2019-04-06 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
2019-04-05 Jan Mulder cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1
2019-04-03 Jan Mulder Bugfix: make date/time setting work over reboots div-fixes-4-1
2019-04-03 Jan Mulder cleanup: do not re-implement a standard function div-fixes-4-1
2019-04-03 Jan Mulder cleanup: make return void when never used div-fixes-4-1
2019-04-02 Jan Mulder cleanup: fix recent extra compiler warnings div-fixes-4-1
2019-04-02 Jan Mulder Bugfix: set battery percentage correctly after RTE update div-fixes-4-1
2019-04-02 heinrichsweikamp add update files for testing purposes
2019-04-01 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
2019-04-01 Jan Mulder cleanup: random set of cleanups div-fixes-3
2019-03-31 Jan Mulder Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3
2019-03-31 Jan Mulder Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3
2019-03-29 Jan Mulder Bugfix: correct presentation error in tissues custom view div-fixes-3
2019-04-01 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
2019-03-31 ideenmodellierer Added schedule point for functions executed once in a second Improve_IPC_Sync
2019-03-31 ideenmodellierer Resolved some minor warnings Improve_IPC_Sync
2019-03-31 ideenmodellierer Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_Sync
2019-03-31 ideenmodellierer Moved display refresh and button action function from tim callback to main loop Improve_IPC_Sync
2019-03-28 heinrichsweikamp Merged in janlmulder/ostc4/edit-fix (pull request #11)
2019-03-28 Jan Mulder Bugfix, trivial: correctly present avg depth in overview custom edit-fix
2019-03-28 Jan Mulder Bugfix: handle rounding of TTS and future TTS consistently edit-fix
2019-03-27 Jan Mulder Bugfix, trivial: do not visit 9 on first digit for setpoint edit-fix
2019-03-26 heinrichsweikamp Merged in janlmulder/ostc4/cv-persistent (pull request #10)
2019-03-26 Jan Mulder New feature: do not show sensor customviews when no sensors attached cv-persistent
2019-03-26 Jan Mulder New feature: make selected customviews persistent cv-persistent
2019-03-24 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
2019-03-24 ideenmodellierer Update SPI error display and handling ImprovmentSPI
2019-03-24 ideenmodellierer Introduce scheduler function ImprovmentSPI
2019-03-24 ideenmodellierer Moved EvaluateButton into 100ms callback ImprovmentSPI
2019-03-24 ideenmodellierer Deleted duplicated header file (keep the one stored in common) ImprovmentSPI
2019-03-23 ideenmodellierer Starting 'ImprovmentSPI' branch ImprovmentSPI
2019-03-23 Ideenmodellierer merge fork
2019-03-17 Thorsten Merged heinrichsweikamp/ostc4 into default
2019-03-16 Thorsten Merged Cleanup_Compass_Wireless into default
2019-03-22 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
2019-03-22 Jan Mulder Bugfix: fix initial CNS data in the logbook header div-fixes-cleaup-2
2019-03-21 Jan Mulder cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-2
2019-03-21 Jan Mulder cleanup: fix (harmless) use before assign div-fixes-cleaup-2
2019-03-20 Jan Mulder Bugfix, minor: color the overview customview correctly div-fixes-cleaup-2
2019-03-19 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
2019-03-19 Jan Mulder cleanup: more trivial cleanup (logbook.c/h) div-fixes-cleanup-1
2019-03-16 Jan Mulder Bugfix: show proper dive mode div-fixes-cleanup-1
2019-03-16 Jan Mulder cleanup: fix compiler warning div-fixes-cleanup-1
2019-03-16 Jan Mulder cleanup: remove unused include file t9.h div-fixes-cleanup-1
2019-03-15 heinrichsweikamp Merged in janlmulder/ostc4/avg-temp (pull request #6)
2019-03-15 Jan Mulder Bugfix: average temperature on arrival from RTE instead of display time avg-temp
2019-03-15 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
2019-03-15 Jan Mulder cleanup: forgotten cleanup from 9da7dd50e2ec cleanup-2
2019-03-15 Jan Mulder cleanup: remove obsolete code, make static, etc. cleanup-2
2019-03-15 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
2019-03-14 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
2019-03-14 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
2019-03-14 ideenmodellierer Resolve fixme comments Cleanup_Compass_Wireless
2019-03-13 ideenmodellierer Removed not suppoted wireless feature Cleanup_Compass_Wireless
2019-03-13 ideenmodellierer Removed not used compass code Cleanup_Compass_Wireless
2019-03-13 ideenmodellierer Starting 'Cleanup_Compass_Wireless' branch Cleanup_Compass_Wireless
2019-03-13 heinrichsweikamp Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
2019-03-12 heinrichsweikamp Merged in janlmulder/ostc4/max-depth (pull request #3)
2019-03-11 Jan Mulder cleanup: do not assign to same max-depth
2019-03-11 Jan Mulder cleanup: remove unused code max-depth
2019-03-11 Jan Mulder Bugfix: make max depth move with current depth (part 2) max-depth
2019-03-11 Jan Mulder Bugfix: make max depth move with current depth (part 1) max-depth
2019-03-10 heinrichsweikamp Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
2019-03-10 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
2019-03-10 Jan Mulder Fix accidentally pushed local code cleanup-1
2019-03-10 Jan Mulder Bugfix: highlight the menu underline correctly on selected state cleanup-1
2019-03-08 Jan Mulder Close branch linux-build. linux-build
2019-03-08 Jan Mulder cleanup: local data and functions can be static (tMenu) cleanup-1
2019-03-07 Jan Mulder cleanup: get rid of some compile warnings cleanup-1
2019-03-08 heinrichsweikamp Minor: Some documentation for new hardware
2019-03-07 heinrichsweikamp Merged in janlmulder/ostc4/linux-build (pull request #1)
2019-02-21 Jan Mulder Add Linux pack script linux-build
2019-02-21 Jan Mulder OSTC4pack_V4: do not hard code output filename for fonts linux-build
2019-02-21 Jan Mulder Add missing file for self build pack tools linux-build
2019-03-07 heinrichsweikamp Merge with FlipDisplay
2019-03-03 Ideenmodellierer Fix for flipped display FlipDisplay
2019-03-03 Ideenmodellierer Bugfix button translation FlipDisplay
2019-03-03 Ideenmodellierer Binaries for beta testing FlipDisplay
2019-03-03 Ideenmodellierer Removed special indicator for DMA transfer error FlipDisplay
2019-03-03 Ideenmodellierer Do hard sync after communication timeout > 1 second FlipDisplay
2019-03-03 Ideenmodellierer Keep NSS low during SPI transfer only FlipDisplay
2019-03-03 Ideenmodellierer Added definitions for SPI sequence counter FlipDisplay
2019-03-03 Ideenmodellierer Moved button evaluation out of interrupt handler FlipDisplay
2019-03-03 Ideenmodellierer Bugfix ButtonResponsiveness FlipDisplay
2019-03-02 Ideenmodellierer Place CNS and pressure within the screen (avoid clipping) FlipDisplay
2019-03-02 Ideenmodellierer Eliminate warnings FlipDisplay
2019-03-02 Ideenmodellierer Use SPI TX callback to synchronize to main CPU FlipDisplay
2019-03-02 Ideenmodellierer Forward compass data during calibration mode FlipDisplay
2019-03-02 Ideenmodellierer RTE Version 1.7 needed because of protocoll and baud rate change FlipDisplay
2019-02-28 Ideenmodellierer Adjust voltage location FlipDisplay
2019-02-28 Ideenmodellierer Use one global structure for schedule data FlipDisplay
2019-02-28 Ideenmodellierer Introduced Token for SPI data exchange FlipDisplay
2019-02-28 Ideenmodellierer Use one global structure for all schedule counters FlipDisplay
2019-02-28 Ideenmodellierer Only use data if data frame is valid FlipDisplay
2019-02-28 Ideenmodellierer Increase prescalar => frame takes about 4ms. FlipDisplay
2019-02-28 Ideenmodellierer Get version from local memory instead from incoming data FlipDisplay
2019-02-23 Ideenmodellierer Removed no longer supported scooter code FlipDisplay
2019-02-19 Ideenmodellierer Only copy data if data connection to RTE is valid FlipDisplay
2019-02-19 Ideenmodellierer Introduces abort of communication in case of a out of sync DMA transfer FlipDisplay
2019-02-19 Ideenmodellierer Restore old data copy locations FlipDisplay
2019-02-19 Ideenmodellierer Removed cyclic (by timer) send on slave side FlipDisplay
2019-02-19 Ideenmodellierer Intoduced transfer abort function for data exchange recovery FlipDisplay
2019-02-19 Ideenmodellierer Add compile switch to disable optimization for specific function FlipDisplay
2019-02-17 Ideenmodellierer Update of configuration and projectfiles to support new library folder structure FlipDisplay
2019-02-17 Ideenmodellierer Minor changes to improved code quality and to eliminate warnings FlipDisplay
2019-02-17 Ideenmodellierer Added function to initialise structures with the actual ambient pressure FlipDisplay
2019-02-17 Ideenmodellierer Added current STM32 standandard libraries in version independend folder structure FlipDisplay
2019-02-17 Ideenmodellierer Drop old STM32 standard librarey files FlipDisplay
2019-02-03 heinrichsweikamp build files kittz
2019-01-27 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
2019-01-27 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
2019-01-27 Ideenmodellierer Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings) FlipDisplay
2019-01-13 Ideenmodellierer Take care for display orientation if deleting lines FlipDisplay
2019-01-13 Ideenmodellierer Use 32bit operations for buffer fills FlipDisplay
2019-01-08 Ideenmodellierer Cleanup warning and disable printf calls FlipDisplay
2019-01-06 Ideenmodellierer Cleanup writechar pointers FlipDisplay
2019-01-06 Ideenmodellierer Enlarge text limits to get string displayed completly FlipDisplay
2019-01-06 Ideenmodellierer Submenus may have 6 items FlipDisplay
2019-01-06 Ideenmodellierer Added small helper for runtime evaluation FlipDisplay
2019-01-03 Ideenmodellierer Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e FlipDisplay
2019-01-03 Ideenmodellierer Eliminate warnings FlipDisplay
2019-01-01 Ideenmodellierer Binaries of development snapshot FlipDisplay
2019-01-01 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
2019-01-01 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
2019-01-01 Ideenmodellierer Added option to handled mirrored display to existing functions FlipDisplay
2019-01-01 Ideenmodellierer Consider computer heading in case of a flipped display FlipDisplay
2019-01-01 Ideenmodellierer Flip key assigment if needed FlipDisplay
2019-01-01 Ideenmodellierer Next text ID for display flip FlipDisplay
2019-01-01 Ideenmodellierer Starting 'FlipDisplay' branch FlipDisplay
2018-12-24 Dmitry Romanov fix comments kittz
2018-12-24 Dmitry Romanov Tested and alive. kittz
2018-11-28 Dmitry Romanov Generalize TEXT of pressure unit kittz
2018-11-27 heinrichsweikamp hPa instead of mbar, enabled Spanish language kittz
2018-11-27 Dmitry Romanov globals kittz
2018-11-27 Dmitry Romanov Stable.fix. kittz
2018-11-26 Dmitry Romanov Config for debug data kittz
2018-11-26 Dmitry Romanov +2ms delay kittz
2018-11-26 Dmitry Romanov fix comments kittz
2018-11-26 Dmitry Romanov Sorry. Now. kittz
2018-11-26 Dmitry Romanov Debounce. Bounced buttons fixed. kittz
2018-11-26 Dmitry Romanov reduce i2c speed and dutycycle for compass stability kittz
2018-11-26 Dmitry Romanov a bit of kittz
2018-11-26 Dmitry Romanov Stable to test. button sensitiveness fix. + global_constants. kittz
2018-11-26 Dmitry Romanov First stable. With minimal button sensitivity fix(for broken buttons) kittz
2018-11-23 Dmitry Romanov +- stable kittz
2018-11-23 Dmitry Romanov temp! full cyclic SPI kittz
2018-11-22 Dmitry Romanov revert kittz
2018-11-21 Dmitry Romanov tmp kittz
2018-11-21 Dmitry Romanov fix time&date after wakeup kittz
2018-11-21 Dmitry Romanov increased interCPU baudrate, cpu2: i2c in SPI1 IRQ kittz
2018-11-21 Dmitry Romanov Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!! kittz
2018-11-20 Dmitry Romanov ??????? kittz
2018-11-20 Dmitry Romanov +i2c analog noise filtering kittz
2018-11-20 Dmitry Romanov Created new branch kittz kittz
2018-10-06 heinrichsweikamp Added Spanish language
2018-10-04 Ideenmodellierer Added Fontpack reference project
2018-10-04 Ideenmodellierer Added script to pack FontPack
2018-10-04 Ideenmodellierer Starting Firmware 1.4 the fontpack version 1.0 is needed
2018-10-04 Ideenmodellierer Update Fontpack code to support font moved to upper memory
2018-10-04 Ideenmodellierer Update version info
2018-10-04 Ideenmodellierer Move font to upper memory
2018-10-04 Ideenmodellierer Add definitions for Fonts to be placed in upper flash
2018-09-11 heinrichsweikamp Merge
2018-09-05 heinrichsweikamp remove wiki files from repo
2018-09-11 heinrichsweikamp old (and new) compass support
2018-08-30 heinrichsweikamp 1.3.8 forum release
2018-08-22 Ideenmodellierer Update image size for 'F'ahrenheit
2018-08-22 Ideenmodellierer Bugfix: FutureTTS and Fahrenheit not displayed correct
2018-08-15 heinrichsweikamp language updates
2018-08-14 heinrichsweikamp language updates
2018-08-14 heinrichsweikamp typo in info menu...
2018-08-13 Ideenmodellierer Replaced wait loop with delay fct
2018-08-12 Ideenmodellierer Bugfix font elements (ue missing)
2018-08-11 heinrichsweikamp rename update batch file
2018-08-10 heinrichsweikamp more language updates
2018-08-10 heinrichsweikamp language updates
2018-08-09 Ideenmodellierer Added UTF8 decode function
2018-08-09 Ideenmodellierer Resolve format warnings
2018-08-07 heinrichsweikamp language updates
2018-08-06 heinrichsweikamp Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
2018-08-05 Ideenmodellierer Added missing ENTRY point
2018-08-05 Ideenmodellierer Allow RTE binaries > 64k size
2018-08-05 Ideenmodellierer Added reference projects
2018-07-31 Ideenmodellierer Resolved warnings pointing to possible invalid memory access
2018-07-30 heinrichsweikamp remove hgsub files
2018-07-30 heinrichsweikamp add o4pack files
2018-07-29 Ideenmodellierer Increased version number
2018-07-29 Ideenmodellierer Added instruction to optimize for size
2018-07-29 Ideenmodellierer Always include Fonts library (to have the adresses defined)
2018-07-29 Ideenmodellierer Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
2018-07-29 Ideenmodellierer Placed directory sections in firmware memory space
2018-07-29 Ideenmodellierer Split memory areas and reverse engineered font library
2018-07-29 Ideenmodellierer Force reset in case of a hard fault
2018-07-29 Ideenmodellierer Non functional change just to use same symbols as CPU1
2018-07-29 Ideenmodellierer Aligned structure with CPU1 linker file
2018-07-29 Ideenmodellierer Increase version number
2018-04-28 heinrichsweikamp include in ostc4 repository
2018-04-28 heinrichsweikamp init
2018-04-28 heinrichsweikamp Update author name for release
2018-03-07 jDG ... more GPL License and general cleanups
2018-03-07 jDG ... OpenOCD scripts to dump firmwares (not working)
2018-02-27 jDG ... minor warnings
2018-02-10 heinrichsweikamp change author name to heinrichs weikamp gmbh
2018-02-06 jDG [ADD]Discovery/Src licences, plus reindentation
2018-01-23 jDG ADD GPL License ...
2018-01-23 jDG ADD script to set GPL headers
2018-01-10 JeanDo ... Fighting with internal oscillator.
2018-01-10 JeanDo ADD C indentation standard
2018-01-09 jDG ... single step in Discovery code: trying to have an oscillator.
2018-01-03 jdg FIX move bootloader SFirmwareData at fixed address 0x0800A000
2018-01-01 JeanDo ADD font check code that runs at FontPack installation.
2018-01-01 JeanDo ADD missing chars in FontPack
2018-01-01 JeanDo FIX need to link actual FirmwareData too...
2018-01-01 JeanDo FIX shared SFirmwareData signature at fixed address
2017-12-30 jdg NEW shared font directory at 0x081E0000
2017-12-26 jdg ... more docs
2017-12-26 jdg ... typo in subrepo ?
2017-12-26 jdg ADD wiki sub-repos
2017-12-26 jdg ... FontPack CPU1 project
2017-12-19 JeanDo FIRST CPU2-RTE LINKING VERSION
2017-12-19 JeanDo FIX move fonts to UPPER ROM SECTION (above 0x8100000)
2017-12-19 JeanDo ADD CPU1 pin layout
2017-12-19 jDG FIRST CPU1-DISCOVERY LINKING VERSION
2017-12-19 jDG CLEANUP move driver code to Common/Drivers
2017-12-18 JeanDo FIX text_multilanguage shall be compiled once
2017-12-18 JeanDo FIX recover jeopardized fonts & images structure
2017-12-18 jDG ... move absolute data to named sections
2017-12-18 jDG CLEAN retrieve original startup code. reset linker script.
2017-12-15 JeanDo ... more clean
2017-12-15 JeanDo MOVE files for other applications
2017-12-13 jDG ... debugging Discovery project compilation.
2017-12-13 jDG CLEANUP remove duplicated support sources
2017-12-13 jDG CLEANUP make svn: subdirectories windows and macos compatibles
2017-12-12 jDG Add chip documentations
2017-12-12 jDG ADD sub repositories