Fri, 12 Apr 2019 07:22:14 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-2 (pull request #17)
|
Thu, 11 Apr 2019 17:48:48 +0200 |
Jan Mulder |
Buelmann: new implementation for ceiling
bm-2
|
Thu, 11 Apr 2019 10:26:22 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-1 (pull request #16)
|
Wed, 10 Apr 2019 17:55:46 +0200 |
Jan Mulder |
Fix stupid commit error
bm-1
|
Tue, 09 Apr 2019 16:30:21 +0200 |
Jan Mulder |
feature: Relative GF to Saturation renames
bm-1
|
Tue, 09 Apr 2019 15:38:31 +0200 |
Jan Mulder |
feature: replace Relative GF by saturation, computational only
bm-1
|
Wed, 10 Apr 2019 11:04:56 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Tue, 09 Apr 2019 08:52:44 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
|
Mon, 08 Apr 2019 12:35:59 +0200 |
Jan Mulder |
debug: add SPI error counter to compass calibration
div-fixes-5
|
Mon, 08 Apr 2019 12:02:07 +0200 |
Jan Mulder |
Comply to datasheet when resetting battery gauge registers
div-fixes-5
|
Mon, 08 Apr 2019 11:18:40 +0200 |
Jan Mulder |
cleanup: factor out I2C1_Status() and cleanup type
div-fixes-5
|
Mon, 08 Apr 2019 11:49:13 +0200 |
Jan Mulder |
Improvement SPI stability/recoverability
div-fixes-5
|
Mon, 08 Apr 2019 10:35:29 +0200 |
Jan Mulder |
cleanup: factor out dataSendToSlaveStopEval
div-fixes-5
|
Mon, 08 Apr 2019 10:16:17 +0200 |
Jan Mulder |
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
div-fixes-5
|
Sat, 06 Apr 2019 20:35:21 +0200 |
Jan Mulder |
Bugfix: do not show NDL in bigscreen mode when zero
div-fixes-5
|
Sat, 06 Apr 2019 09:41:14 +0200 |
heinrichsweikamp |
Minor: translating some comments and variable names into english, some cleanup in tComm.c
|
Sat, 06 Apr 2019 09:11:39 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Sat, 06 Apr 2019 07:01:21 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
|
Fri, 05 Apr 2019 09:12:04 +0200 |
Jan Mulder |
cleanup, bugfix: do not exit simulator on 5h dive time
div-fixes-4-1
|
Wed, 03 Apr 2019 21:11:56 +0200 |
Jan Mulder |
Bugfix: make date/time setting work over reboots
div-fixes-4-1
|
Wed, 03 Apr 2019 14:33:12 +0200 |
Jan Mulder |
cleanup: do not re-implement a standard function
div-fixes-4-1
|
Wed, 03 Apr 2019 14:16:59 +0200 |
Jan Mulder |
cleanup: make return void when never used
div-fixes-4-1
|
Tue, 02 Apr 2019 15:11:42 +0200 |
Jan Mulder |
cleanup: fix recent extra compiler warnings
div-fixes-4-1
|
Tue, 02 Apr 2019 14:53:15 +0200 |
Jan Mulder |
Bugfix: set battery percentage correctly after RTE update
div-fixes-4-1
|
Tue, 02 Apr 2019 18:18:22 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Mon, 01 Apr 2019 19:19:04 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
|
Mon, 01 Apr 2019 15:50:41 +0200 |
Jan Mulder |
cleanup: random set of cleanups
div-fixes-3
|
Sun, 31 Mar 2019 19:35:51 +0200 |
Jan Mulder |
Bugfix, deco: fix 2 (small) problems with calculated ceiling
div-fixes-3
|
Sun, 31 Mar 2019 15:14:06 +0200 |
Jan Mulder |
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
div-fixes-3
|
Fri, 29 Mar 2019 14:00:43 +0100 |
Jan Mulder |
Bugfix: correct presentation error in tissues custom view
div-fixes-3
|
Mon, 01 Apr 2019 09:01:09 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
|
Sun, 31 Mar 2019 15:49:47 +0200 |
ideenmodellierer |
Added schedule point for functions executed once in a second
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:44:56 +0200 |
ideenmodellierer |
Resolved some minor warnings
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:44:12 +0200 |
ideenmodellierer |
Splitted 120 seconds UART timeout into chunks of 500ms
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:39:44 +0200 |
ideenmodellierer |
Moved display refresh and button action function from tim callback to main loop
Improve_IPC_Sync
|
Thu, 28 Mar 2019 13:05:29 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/edit-fix (pull request #11)
|
Thu, 28 Mar 2019 09:54:29 +0100 |
Jan Mulder |
Bugfix, trivial: correctly present avg depth in overview custom
edit-fix
|
Thu, 28 Mar 2019 08:26:17 +0100 |
Jan Mulder |
Bugfix: handle rounding of TTS and future TTS consistently
edit-fix
|
Wed, 27 Mar 2019 15:12:26 +0100 |
Jan Mulder |
Bugfix, trivial: do not visit 9 on first digit for setpoint
edit-fix
|
Tue, 26 Mar 2019 22:23:26 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cv-persistent (pull request #10)
|
Tue, 26 Mar 2019 16:02:22 +0100 |
Jan Mulder |
New feature: do not show sensor customviews when no sensors attached
cv-persistent
|
Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
Sun, 24 Mar 2019 22:09:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
|
Sun, 24 Mar 2019 22:57:28 +0100 |
ideenmodellierer |
Update SPI error display and handling
ImprovmentSPI
|
Sun, 24 Mar 2019 22:53:17 +0100 |
ideenmodellierer |
Introduce scheduler function
ImprovmentSPI
|
Sun, 24 Mar 2019 22:51:15 +0100 |
ideenmodellierer |
Moved EvaluateButton into 100ms callback
ImprovmentSPI
|
Sun, 24 Mar 2019 22:48:49 +0100 |
ideenmodellierer |
Deleted duplicated header file (keep the one stored in common)
ImprovmentSPI
|
Sat, 23 Mar 2019 21:35:29 +0100 |
ideenmodellierer |
Starting 'ImprovmentSPI' branch
ImprovmentSPI
|
Sat, 23 Mar 2019 21:32:16 +0100 |
Ideenmodellierer |
merge fork
|
Sun, 17 Mar 2019 19:16:59 +0100 |
Thorsten |
Merged heinrichsweikamp/ostc4 into default
|
Sat, 16 Mar 2019 19:58:52 +0000 |
Thorsten |
Merged Cleanup_Compass_Wireless into default
|
Fri, 22 Mar 2019 08:15:30 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
|
Fri, 22 Mar 2019 08:36:39 +0100 |
Jan Mulder |
Bugfix: fix initial CNS data in the logbook header
div-fixes-cleaup-2
|
Thu, 21 Mar 2019 15:28:47 +0100 |
Jan Mulder |
cleanup: another cleanup session (data_exchange_main.c)
div-fixes-cleaup-2
|
Thu, 21 Mar 2019 11:41:59 +0100 |
Jan Mulder |
cleanup: fix (harmless) use before assign
div-fixes-cleaup-2
|
Wed, 20 Mar 2019 16:24:10 +0100 |
Jan Mulder |
Bugfix, minor: color the overview customview correctly
div-fixes-cleaup-2
|
Tue, 19 Mar 2019 15:43:38 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
|
Tue, 19 Mar 2019 11:42:00 +0100 |
Jan Mulder |
cleanup: more trivial cleanup (logbook.c/h)
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:52:06 +0100 |
Jan Mulder |
Bugfix: show proper dive mode
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:08:18 +0100 |
Jan Mulder |
cleanup: fix compiler warning
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:02:10 +0100 |
Jan Mulder |
cleanup: remove unused include file t9.h
div-fixes-cleanup-1
|
Fri, 15 Mar 2019 15:48:53 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/avg-temp (pull request #6)
|
Fri, 15 Mar 2019 15:04:57 +0100 |
Jan Mulder |
Bugfix: average temperature on arrival from RTE instead of display time
avg-temp
|
Fri, 15 Mar 2019 12:55:58 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
|
Fri, 15 Mar 2019 12:53:14 +0100 |
Jan Mulder |
cleanup: forgotten cleanup from 9da7dd50e2ec
cleanup-2
|
Fri, 15 Mar 2019 12:39:28 +0100 |
Jan Mulder |
cleanup: remove obsolete code, make static, etc.
cleanup-2
|
Fri, 15 Mar 2019 08:22:16 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
|
Thu, 14 Mar 2019 20:44:23 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
Thu, 14 Mar 2019 20:44:03 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
Thu, 14 Mar 2019 20:43:47 +0100 |
ideenmodellierer |
Resolve fixme comments
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 21:51:25 +0100 |
ideenmodellierer |
Removed not suppoted wireless feature
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 21:49:25 +0100 |
ideenmodellierer |
Removed not used compass code
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 20:53:05 +0100 |
ideenmodellierer |
Starting 'Cleanup_Compass_Wireless' branch
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 20:51:50 +0100 |
heinrichsweikamp |
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
|
Tue, 12 Mar 2019 15:04:19 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/max-depth (pull request #3)
|
Mon, 11 Mar 2019 20:20:17 +0100 |
Jan Mulder |
cleanup: do not assign to same
max-depth
|
Mon, 11 Mar 2019 19:57:51 +0100 |
Jan Mulder |
cleanup: remove unused code
max-depth
|
Mon, 11 Mar 2019 19:54:20 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 2)
max-depth
|
Mon, 11 Mar 2019 19:48:57 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 1)
max-depth
|
Sun, 10 Mar 2019 20:30:42 +0100 |
heinrichsweikamp |
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
|
Sun, 10 Mar 2019 15:39:55 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
|
Sun, 10 Mar 2019 10:46:48 +0100 |
Jan Mulder |
Fix accidentally pushed local code
cleanup-1
|
Sun, 10 Mar 2019 10:09:58 +0100 |
Jan Mulder |
Bugfix: highlight the menu underline correctly on selected state
cleanup-1
|
Fri, 08 Mar 2019 19:26:36 +0000 |
Jan Mulder |
Close branch linux-build.
linux-build
|
Fri, 08 Mar 2019 13:47:52 +0100 |
Jan Mulder |
cleanup: local data and functions can be static (tMenu)
cleanup-1
|
Thu, 07 Mar 2019 21:52:23 +0100 |
Jan Mulder |
cleanup: get rid of some compile warnings
cleanup-1
|
Fri, 08 Mar 2019 10:31:32 +0100 |
heinrichsweikamp |
Minor: Some documentation for new hardware
|
Thu, 07 Mar 2019 14:15:33 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/linux-build (pull request #1)
|
Thu, 21 Feb 2019 16:56:08 +0100 |
Jan Mulder |
Add Linux pack script
linux-build
|
Thu, 21 Feb 2019 10:29:26 +0100 |
Jan Mulder |
OSTC4pack_V4: do not hard code output filename for fonts
linux-build
|
Thu, 21 Feb 2019 10:01:36 +0100 |
Jan Mulder |
Add missing file for self build pack tools
linux-build
|
Thu, 07 Mar 2019 15:06:43 +0100 |
heinrichsweikamp |
Merge with FlipDisplay
|
Sun, 03 Mar 2019 21:13:31 +0100 |
Ideenmodellierer |
Fix for flipped display
FlipDisplay
|
Sun, 03 Mar 2019 21:12:06 +0100 |
Ideenmodellierer |
Bugfix button translation
FlipDisplay
|
Sun, 03 Mar 2019 19:20:18 +0100 |
Ideenmodellierer |
Binaries for beta testing
FlipDisplay
|
Sun, 03 Mar 2019 19:18:51 +0100 |
Ideenmodellierer |
Removed special indicator for DMA transfer error
FlipDisplay
|
Sun, 03 Mar 2019 17:46:50 +0100 |
Ideenmodellierer |
Do hard sync after communication timeout > 1 second
FlipDisplay
|
Sun, 03 Mar 2019 17:45:39 +0100 |
Ideenmodellierer |
Keep NSS low during SPI transfer only
FlipDisplay
|
Sun, 03 Mar 2019 12:19:47 +0100 |
Ideenmodellierer |
Added definitions for SPI sequence counter
FlipDisplay
|
Sun, 03 Mar 2019 12:18:44 +0100 |
Ideenmodellierer |
Moved button evaluation out of interrupt handler
FlipDisplay
|
Sun, 03 Mar 2019 12:16:54 +0100 |
Ideenmodellierer |
Bugfix ButtonResponsiveness
FlipDisplay
|
Sat, 02 Mar 2019 17:42:51 +0100 |
Ideenmodellierer |
Place CNS and pressure within the screen (avoid clipping)
FlipDisplay
|
Sat, 02 Mar 2019 17:42:06 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
Sat, 02 Mar 2019 17:01:06 +0100 |
Ideenmodellierer |
Use SPI TX callback to synchronize to main CPU
FlipDisplay
|
Sat, 02 Mar 2019 16:57:59 +0100 |
Ideenmodellierer |
Forward compass data during calibration mode
FlipDisplay
|
Sat, 02 Mar 2019 16:56:58 +0100 |
Ideenmodellierer |
RTE Version 1.7 needed because of protocoll and baud rate change
FlipDisplay
|
Thu, 28 Feb 2019 20:05:51 +0100 |
Ideenmodellierer |
Adjust voltage location
FlipDisplay
|
Thu, 28 Feb 2019 20:05:17 +0100 |
Ideenmodellierer |
Use one global structure for schedule data
FlipDisplay
|
Thu, 28 Feb 2019 19:38:36 +0100 |
Ideenmodellierer |
Introduced Token for SPI data exchange
FlipDisplay
|
Thu, 28 Feb 2019 19:34:08 +0100 |
Ideenmodellierer |
Use one global structure for all schedule counters
FlipDisplay
|
Thu, 28 Feb 2019 19:07:10 +0100 |
Ideenmodellierer |
Only use data if data frame is valid
FlipDisplay
|
Thu, 28 Feb 2019 19:03:29 +0100 |
Ideenmodellierer |
Increase prescalar => frame takes about 4ms.
FlipDisplay
|
Thu, 28 Feb 2019 19:02:34 +0100 |
Ideenmodellierer |
Get version from local memory instead from incoming data
FlipDisplay
|
Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
Tue, 19 Feb 2019 21:48:32 +0100 |
Ideenmodellierer |
Only copy data if data connection to RTE is valid
FlipDisplay
|
Tue, 19 Feb 2019 18:20:45 +0100 |
Ideenmodellierer |
Introduces abort of communication in case of a out of sync DMA transfer
FlipDisplay
|
Tue, 19 Feb 2019 18:18:37 +0100 |
Ideenmodellierer |
Restore old data copy locations
FlipDisplay
|
Tue, 19 Feb 2019 18:16:59 +0100 |
Ideenmodellierer |
Removed cyclic (by timer) send on slave side
FlipDisplay
|
Tue, 19 Feb 2019 18:15:35 +0100 |
Ideenmodellierer |
Intoduced transfer abort function for data exchange recovery
FlipDisplay
|
Tue, 19 Feb 2019 18:13:18 +0100 |
Ideenmodellierer |
Add compile switch to disable optimization for specific function
FlipDisplay
|
Sun, 17 Feb 2019 21:29:38 +0100 |
Ideenmodellierer |
Update of configuration and projectfiles to support new library folder structure
FlipDisplay
|
Sun, 17 Feb 2019 21:22:13 +0100 |
Ideenmodellierer |
Minor changes to improved code quality and to eliminate warnings
FlipDisplay
|
Sun, 17 Feb 2019 21:14:09 +0100 |
Ideenmodellierer |
Added function to initialise structures with the actual ambient pressure
FlipDisplay
|
Sun, 17 Feb 2019 21:12:22 +0100 |
Ideenmodellierer |
Added current STM32 standandard libraries in version independend folder structure
FlipDisplay
|
Sun, 17 Feb 2019 21:07:35 +0100 |
Ideenmodellierer |
Drop old STM32 standard librarey files
FlipDisplay
|
Sun, 03 Feb 2019 10:04:27 +0100 |
heinrichsweikamp |
build files
kittz
|
Sun, 27 Jan 2019 22:21:01 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
Sun, 27 Jan 2019 22:17:16 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
Sun, 27 Jan 2019 22:01:07 +0100 |
Ideenmodellierer |
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings)
FlipDisplay
|
Sun, 13 Jan 2019 18:59:53 +0100 |
Ideenmodellierer |
Take care for display orientation if deleting lines
FlipDisplay
|
Sun, 13 Jan 2019 18:58:23 +0100 |
Ideenmodellierer |
Use 32bit operations for buffer fills
FlipDisplay
|
Tue, 08 Jan 2019 22:31:17 +0100 |
Ideenmodellierer |
Cleanup warning and disable printf calls
FlipDisplay
|
Sun, 06 Jan 2019 22:33:26 +0100 |
Ideenmodellierer |
Cleanup writechar pointers
FlipDisplay
|
Sun, 06 Jan 2019 22:31:45 +0100 |
Ideenmodellierer |
Enlarge text limits to get string displayed completly
FlipDisplay
|
Sun, 06 Jan 2019 22:30:35 +0100 |
Ideenmodellierer |
Submenus may have 6 items
FlipDisplay
|
Sun, 06 Jan 2019 22:27:46 +0100 |
Ideenmodellierer |
Added small helper for runtime evaluation
FlipDisplay
|
Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
Thu, 03 Jan 2019 18:35:11 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
Tue, 01 Jan 2019 21:04:01 +0100 |
Ideenmodellierer |
Binaries of development snapshot
FlipDisplay
|
Tue, 01 Jan 2019 21:03:33 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
Tue, 01 Jan 2019 21:03:10 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
Tue, 01 Jan 2019 21:02:17 +0100 |
Ideenmodellierer |
Added option to handled mirrored display to existing functions
FlipDisplay
|
Tue, 01 Jan 2019 21:00:55 +0100 |
Ideenmodellierer |
Consider computer heading in case of a flipped display
FlipDisplay
|
Tue, 01 Jan 2019 21:00:13 +0100 |
Ideenmodellierer |
Flip key assigment if needed
FlipDisplay
|
Tue, 01 Jan 2019 20:59:36 +0100 |
Ideenmodellierer |
Next text ID for display flip
FlipDisplay
|
Tue, 01 Jan 2019 20:57:41 +0100 |
Ideenmodellierer |
Starting 'FlipDisplay' branch
FlipDisplay
|
Mon, 24 Dec 2018 16:19:09 +0300 |
Dmitry Romanov |
fix comments
kittz
|
Mon, 24 Dec 2018 16:15:02 +0300 |
Dmitry Romanov |
Tested and alive.
kittz
|
Wed, 28 Nov 2018 09:36:33 +0300 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
Tue, 27 Nov 2018 18:31:21 +0100 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
Tue, 27 Nov 2018 13:18:59 +0300 |
Dmitry Romanov |
globals
kittz
|
Tue, 27 Nov 2018 12:59:56 +0300 |
Dmitry Romanov |
Stable.fix.
kittz
|
Mon, 26 Nov 2018 15:25:52 +0300 |
Dmitry Romanov |
Config for debug data
kittz
|
Mon, 26 Nov 2018 13:58:51 +0300 |
Dmitry Romanov |
+2ms delay
kittz
|
Mon, 26 Nov 2018 13:49:02 +0300 |
Dmitry Romanov |
fix comments
kittz
|
Mon, 26 Nov 2018 13:45:14 +0300 |
Dmitry Romanov |
Sorry. Now.
kittz
|
Mon, 26 Nov 2018 13:42:38 +0300 |
Dmitry Romanov |
Debounce. Bounced buttons fixed.
kittz
|
Mon, 26 Nov 2018 12:20:31 +0300 |
Dmitry Romanov |
reduce i2c speed and dutycycle for compass stability
kittz
|
Mon, 26 Nov 2018 11:38:06 +0300 |
Dmitry Romanov |
a bit of
kittz
|
Mon, 26 Nov 2018 10:50:39 +0300 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
Mon, 26 Nov 2018 10:13:02 +0300 |
Dmitry Romanov |
First stable. With minimal button sensitivity fix(for broken buttons)
kittz
|
Fri, 23 Nov 2018 18:14:56 +0300 |
Dmitry Romanov |
+- stable
kittz
|
Fri, 23 Nov 2018 16:52:21 +0300 |
Dmitry Romanov |
temp! full cyclic SPI
kittz
|
Thu, 22 Nov 2018 12:02:55 +0300 |
Dmitry Romanov |
revert
kittz
|
Wed, 21 Nov 2018 13:57:58 +0300 |
Dmitry Romanov |
tmp
kittz
|
Wed, 21 Nov 2018 13:12:44 +0300 |
Dmitry Romanov |
fix time&date after wakeup
kittz
|
Wed, 21 Nov 2018 12:49:54 +0300 |
Dmitry Romanov |
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ
kittz
|
Wed, 21 Nov 2018 10:25:15 +0300 |
Dmitry Romanov |
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
kittz
|
Tue, 20 Nov 2018 12:27:40 +0300 |
Dmitry Romanov |
???????
kittz
|
Tue, 20 Nov 2018 12:08:19 +0300 |
Dmitry Romanov |
+i2c analog noise filtering
kittz
|
Tue, 20 Nov 2018 09:25:17 +0000 |
Dmitry Romanov |
Created new branch kittz
kittz
|
Sat, 06 Oct 2018 15:02:11 +0200 |
heinrichsweikamp |
Added Spanish language
|
Thu, 04 Oct 2018 20:49:47 +0200 |
Ideenmodellierer |
Added Fontpack reference project
|
Thu, 04 Oct 2018 20:45:12 +0200 |
Ideenmodellierer |
Added script to pack FontPack
|
Thu, 04 Oct 2018 20:44:19 +0200 |
Ideenmodellierer |
Starting Firmware 1.4 the fontpack version 1.0 is needed
|
Thu, 04 Oct 2018 20:42:56 +0200 |
Ideenmodellierer |
Update Fontpack code to support font moved to upper memory
|
Thu, 04 Oct 2018 20:41:21 +0200 |
Ideenmodellierer |
Update version info
|
Thu, 04 Oct 2018 20:40:53 +0200 |
Ideenmodellierer |
Move font to upper memory
|
Thu, 04 Oct 2018 20:40:21 +0200 |
Ideenmodellierer |
Add definitions for Fonts to be placed in upper flash
|
Tue, 11 Sep 2018 22:16:05 +0200 |
heinrichsweikamp |
Merge
|
Wed, 05 Sep 2018 10:41:48 +0200 |
heinrichsweikamp |
remove wiki files from repo
|
Tue, 11 Sep 2018 19:29:58 +0200 |
heinrichsweikamp |
old (and new) compass support
|
Thu, 30 Aug 2018 21:48:21 +0200 |
heinrichsweikamp |
1.3.8 forum release
|
Wed, 22 Aug 2018 18:54:01 +0200 |
Ideenmodellierer |
Update image size for 'F'ahrenheit
|
Wed, 22 Aug 2018 11:35:05 +0200 |
Ideenmodellierer |
Bugfix: FutureTTS and Fahrenheit not displayed correct
|
Wed, 15 Aug 2018 12:16:23 +0200 |
heinrichsweikamp |
language updates
|
Tue, 14 Aug 2018 13:53:43 +0200 |
heinrichsweikamp |
language updates
|
Tue, 14 Aug 2018 12:43:58 +0200 |
heinrichsweikamp |
typo in info menu...
|
Mon, 13 Aug 2018 19:11:14 +0200 |
Ideenmodellierer |
Replaced wait loop with delay fct
|
Sun, 12 Aug 2018 23:02:13 +0200 |
Ideenmodellierer |
Bugfix font elements (ue missing)
|
Sat, 11 Aug 2018 13:57:47 +0200 |
heinrichsweikamp |
rename update batch file
|
Fri, 10 Aug 2018 19:40:55 +0200 |
heinrichsweikamp |
more language updates
|
Fri, 10 Aug 2018 19:22:12 +0200 |
heinrichsweikamp |
language updates
|
Thu, 09 Aug 2018 22:39:15 +0200 |
Ideenmodellierer |
Added UTF8 decode function
|
Thu, 09 Aug 2018 22:38:56 +0200 |
Ideenmodellierer |
Resolve format warnings
|
Tue, 07 Aug 2018 17:03:36 +0200 |
heinrichsweikamp |
language updates
|
Tue, 07 Aug 2018 00:24:05 +0200 |
heinrichsweikamp |
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
|
Sun, 05 Aug 2018 12:57:49 +0200 |
Ideenmodellierer |
Added missing ENTRY point
|
Sun, 05 Aug 2018 12:57:23 +0200 |
Ideenmodellierer |
Allow RTE binaries > 64k size
|
Sun, 05 Aug 2018 12:56:43 +0200 |
Ideenmodellierer |
Added reference projects
|
Tue, 31 Jul 2018 22:28:21 +0200 |
Ideenmodellierer |
Resolved warnings pointing to possible invalid memory access
|
Mon, 30 Jul 2018 11:37:39 +0200 |
heinrichsweikamp |
remove hgsub files
|
Mon, 30 Jul 2018 11:31:20 +0200 |
heinrichsweikamp |
add o4pack files
|
Sun, 29 Jul 2018 18:27:37 +0200 |
Ideenmodellierer |
Increased version number
|
Sun, 29 Jul 2018 18:16:01 +0200 |
Ideenmodellierer |
Added instruction to optimize for size
|
Sun, 29 Jul 2018 18:09:58 +0200 |
Ideenmodellierer |
Always include Fonts library (to have the adresses defined)
|
Sun, 29 Jul 2018 18:07:52 +0200 |
Ideenmodellierer |
Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
|
Sun, 29 Jul 2018 18:06:37 +0200 |
Ideenmodellierer |
Placed directory sections in firmware memory space
|
Sun, 29 Jul 2018 18:05:44 +0200 |
Ideenmodellierer |
Split memory areas and reverse engineered font library
|
Sun, 29 Jul 2018 16:46:31 +0200 |
Ideenmodellierer |
Force reset in case of a hard fault
|
Sun, 29 Jul 2018 16:45:37 +0200 |
Ideenmodellierer |
Non functional change just to use same symbols as CPU1
|
Sun, 29 Jul 2018 16:45:00 +0200 |
Ideenmodellierer |
Aligned structure with CPU1 linker file
|
Sun, 29 Jul 2018 16:17:25 +0200 |
Ideenmodellierer |
Increase version number
|
Sat, 28 Apr 2018 11:52:34 +0200 |
heinrichsweikamp |
include in ostc4 repository
|
Sat, 28 Apr 2018 11:48:39 +0200 |
heinrichsweikamp |
init
|
Sat, 28 Apr 2018 11:33:57 +0200 |
heinrichsweikamp |
Update author name for release
|
Wed, 07 Mar 2018 18:56:48 +0100 |
jDG |
... more GPL License and general cleanups
|
Wed, 07 Mar 2018 17:35:35 +0100 |
jDG |
... OpenOCD scripts to dump firmwares (not working)
|
Tue, 27 Feb 2018 13:57:30 +0100 |
jDG |
... minor warnings
|
Sat, 10 Feb 2018 11:25:13 +0100 |
heinrichsweikamp |
change author name to heinrichs weikamp gmbh
|
Tue, 06 Feb 2018 16:13:30 +0100 |
jDG |
[ADD]Discovery/Src licences, plus reindentation
|
Tue, 23 Jan 2018 17:29:40 +0100 |
jDG |
ADD GPL License ...
|
Tue, 23 Jan 2018 13:36:25 +0100 |
jDG |
ADD script to set GPL headers
|
Wed, 10 Jan 2018 19:59:50 +0100 |
JeanDo |
... Fighting with internal oscillator.
|
Wed, 10 Jan 2018 11:22:33 +0100 |
JeanDo |
ADD C indentation standard
|
Tue, 09 Jan 2018 18:34:03 +0100 |
jDG |
... single step in Discovery code: trying to have an oscillator.
|
Wed, 03 Jan 2018 01:40:59 +0100 |
jdg |
FIX move bootloader SFirmwareData at fixed address 0x0800A000
|
Mon, 01 Jan 2018 20:12:34 +0100 |
JeanDo |
ADD font check code that runs at FontPack installation.
|
Mon, 01 Jan 2018 18:56:14 +0100 |
JeanDo |
ADD missing chars in FontPack
|
Mon, 01 Jan 2018 18:55:12 +0100 |
JeanDo |
FIX need to link actual FirmwareData too...
|
Mon, 01 Jan 2018 18:24:07 +0100 |
JeanDo |
FIX shared SFirmwareData signature at fixed address
|
Sat, 30 Dec 2017 20:24:04 +0100 |
jdg |
NEW shared font directory at 0x081E0000
|
Tue, 26 Dec 2017 19:31:13 +0100 |
jdg |
... more docs
|
Tue, 26 Dec 2017 18:26:12 +0100 |
jdg |
... typo in subrepo ?
|
Tue, 26 Dec 2017 18:24:03 +0100 |
jdg |
ADD wiki sub-repos
|
Tue, 26 Dec 2017 18:22:49 +0100 |
jdg |
... FontPack CPU1 project
|
Tue, 19 Dec 2017 23:42:13 +0100 |
JeanDo |
FIRST CPU2-RTE LINKING VERSION
|
Tue, 19 Dec 2017 18:47:04 +0100 |
JeanDo |
FIX move fonts to UPPER ROM SECTION (above 0x8100000)
|
Tue, 19 Dec 2017 18:45:03 +0100 |
JeanDo |
ADD CPU1 pin layout
|
Tue, 19 Dec 2017 13:45:03 +0100 |
jDG |
FIRST CPU1-DISCOVERY LINKING VERSION
|