| 6 weeks ago |
heinrichsweikamp |
Fix a couple of bugs in the scrubber timer:
Evo_2_23
|
| 6 weeks ago |
heinrichsweikamp |
Add proper string termination and fix space. (mikeller)
Evo_2_23
|
| 6 weeks ago |
Ideenmodellierer |
Remove sensor index for CO2 sensors:
Evo_2_23
|
| 6 weeks ago |
Ideenmodellierer |
Bugfix ppo2 display in simulator mode:
Evo_2_23
|
| 6 weeks ago |
Ideenmodellierer |
Devbugfix UART buffer cleaning:
Evo_2_23
|
| 6 weeks ago |
Ideenmodellierer |
Workaround single DiveO2 startup:
Evo_2_23
|
| 7 weeks ago |
heinrichsweikamp |
Rename "Travel" to "Work" gas as in the older/smaller OSTC (again)
Evo_2_23
|
| 7 weeks ago |
Ideenmodellierer |
Deactivate deco gas calculation option:
Evo_2_23
|
| 8 weeks ago |
Ideenmodellierer |
Disabled development debug warnings
Evo_2_23
|
| 8 weeks ago |
Ideenmodellierer |
Bootloader BT module factory reset:
Evo_2_23
|
| 8 weeks ago |
Ideenmodellierer |
Old / new BT module communication:
Evo_2_23
|
| 8 weeks ago |
heinrichsweikamp |
Zusammenf?hren
Evo_2_23
|
| 8 weeks ago |
heinrichsweikamp |
work on release candidate
Evo_2_23
|
| 2 months ago |
heinrichsweikamp |
Add a 'Reverse' action to the compass heading dive menu.
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Bluetooth commands for new module:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Set correct section name for HW Data
Evo_2_23
|
| 2 months ago |
heinrichsweikamp |
Zusammenf?hren
Evo_2_23
|
| 2 months ago |
heinrichsweikamp |
hard-coded hardwaredata for testing purposes
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Position view for flipped mode:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Bootloader: Activate Hardware data defaults:
Evo_2_23
|
| 2 months ago |
heinrichsweikamp |
Minor: fix some typos in the bootloader code
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Devbugfix: external surface pressure calibration:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Changed menu name O2 Sensors to External Sensors:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
External sensor commands: Add sensor ID to command:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Bugfix UART sensor MUX channel selection after sleep:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
GNSS backup position:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Slow exit graph draw normal ascent if slow exit is inactive:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Bugfix ascent graph in simulator:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Bugfix ppo2 high/low check in OC mode:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Added vibration warning:
Evo_2_23
|
| 2 months ago |
heinrichsweikamp |
Increase brightness for inactive gases to improve readability in the OSTC 5.
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
GNSS UTC in Date-Time menu:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
GNSS sleep mode:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
GNSS sleep mode:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
GNSS set to full power at startup:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Added slow exit graph to t3 view:
Evo_2_23
|
| 2 months ago |
Ideenmodellierer |
Restructure Date/Time menu:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Added missing compile switches
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Power down gnss module during dive:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Added gnss to logbook data:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
GNSS improvments:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Resume UART com with gnss after sleep:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Update GPIO:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Compile switch for RTE sleep debug:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
GNSS introduced power saving mode:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Added unit files for GPIO:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Position visualization:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
UART Gnss: Added fletcher calculation:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Cleanup Gnss UART implementation:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Added Sat Status Overview:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
DevBugfix Co2 sensor details:
Evo_2_23
|
| 3 months ago |
heinrichsweikamp |
Add a line to the compass heading dive menu that shows the currently set heading to enable the
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Cleanup Internal Uart:
Evo_2_23
|
| 3 months ago |
Ideenmodellierer |
Cleanup Internal Uart:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Bugfix sensor de-/activation handling:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Bugfix scrubber time:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Bugfix real scrubber time decreased in sim mode:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
UART6 DMA handling:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Moved UART6 into a separate unit:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Improved mix mode ADC conversion:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Added view for position data:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
GNSS support for external UART interface:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Switch external interface tx communication to DMA:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
Bugfix external interface power up after sleep:
Evo_2_23
|
| 4 months ago |
Ideenmodellierer |
External sensor UART: Switch to DMA TX transfers:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
SlowExitTimer:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Devbugfix SlowExit depth:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Adapted limit for better gas warning:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Ascent speed visualization:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
VPMTable deco stop visualization:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Devbugfix Sample time resolution for longer dives:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Define state of new GPIO out pins:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Deactivated GNSS per default
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Adaptation custom view deco plan for VPM:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Bugfix de-/activation of deco stop consideration in simulator:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
DevBugfix SlowExit edit display:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Ascent speed display:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Disable GNSS operations using compile switch:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
VPM table mode:
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Bugfix simulator/planer:
Evo_2_23
|
| 5 months ago |
heinrichsweikamp |
minor: LED/Vibration behavior on wake-up
Evo_2_23
|
| 5 months ago |
Ideenmodellierer |
Added data path and visualization for position data:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Disabled debug features
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Use dive profile as source for simulator:
Evo_2_23
|
| 5 months ago |
ideenmodellierer |
Development Feature Runtime in Debugview:
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
Zusammenf?hren
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
GNSS UART DMA test
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Reenabled fast communication:
Evo_2_23
|
| 6 months ago |
ideenmodellierer |
Smal modification slow exit counter:
Evo_2_23
|
| 6 months ago |
ideenmodellierer |
Added hysteresis for ascent speed coloring:
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
cleanup and disable function for GNSS uart and DMA
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
GNSS work in progress
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Dev bugfix: Consider decogas in planner independen from calculation setting:
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
adding GNSS code
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Improve communication stability:
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Replaced global hardwareDisplay with unit access:
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Minor screen cleanup:
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Added compile switch for predive check menu:
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Added slow exit timer function:
Evo_2_23
|
| 6 months ago |
Ideenmodellierer |
Added filtering of ascent speed:
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
support for led and vibration
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
new bluetooth work, bootloader work
Evo_2_23
|
| 6 months ago |
heinrichsweikamp |
brightness settings and proper power down for new screen
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
DevBugfix: Exit condition deco_stop_depth
Evo_2_23
|
| 7 months ago |
heinrichsweikamp |
Minor: Enable CO2-Sensor as default now
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
DevBugfix: Added missing default language value
Evo_2_23
|
| 7 months ago |
heinrichsweikamp |
minor
Evo_2_23
|
| 7 months ago |
heinrichsweikamp |
merge new screen stuff
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
Added first time initialization for new bluetooth module:
Evo_2_23
|
| 7 months ago |
heinrichsweikamp |
support for new screen
|
| 7 months ago |
Ideenmodellierer |
Instrument code for Bootloader:
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
Reactivate Bootloader:
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
Introduce speed dependend coloring of depth:
Evo_2_23
|
| 7 months ago |
Ideenmodellierer |
Decrease calculation interval for ascend speed:
Evo_2_23
|
| 7 months ago |
heinrichsweikamp |
Zusammenf?hren
|
| 7 months ago |
heinrichsweikamp |
When opening the logbook, or scrolling inside a logbook page,
|
| 7 months ago |
heinrichsweikamp |
Fix incorrect logging of bailout to Open Circuit when using the best gas.
|
| 8 months ago |
Ideenmodellierer |
Bugfix empty line in deco plan (VPM only):
Evo_2_23
|
| 8 months ago |
Ideenmodellierer |
Only use deco gas for calculation if option is enabled:
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Synchronize ADC and UART activities:
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Code cleanup
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Improvment battery charger visualization:
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Bugfix initialisation of surface pressure:
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Developer feature debug warning:
Evo_2_23
|
| 10 months ago |
Ideenmodellierer |
Do not show SP tab if PSCR mode is active:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Redefine Deco gas creation function:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Development bugfix menu id handling:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Potential Bugfix Selection MenuEdit lifecycle:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Bugfix Selection of custom views:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Added line checks for System Menu:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Check line enable/disable state when a new page is selected:
Evo_2_23
|
| 12 months ago |
Ideenmodellierer |
Consider flipped screen for Predive menu:
Evo_2_23
|
| 13 months ago |
Ideenmodellierer |
Bugfix tInfo_write_content_simple flip:
Evo_2_23
|
| 13 months ago |
heinrichsweikamp |
Minor: Remove absolute paths from the reference project files
|
| 14 months ago |
Ideenmodellierer |
Consider pressure offset compensation in case of setting a default value:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Added new PreDiveCheck info page:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Added option to adjust pressure to diveO2 reference:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Update version number and set beta state
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Migrated Sentinel protocol to new UART structure:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Added autofocus for T3_DecoTTS view:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Development bugfix CO2 LLC:
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Code cleanup: UART protocol definitions
Evo_2_23
|
| 14 months ago |
Ideenmodellierer |
Added T3 autofocus for Gas list:
Evo_2_23
|
| 14 months ago |
ideenmodellierer |
Bugfixes and code cleanup for BF views:
Evo_2_23
|
| 14 months ago |
ideenmodellierer |
Bugfix BF temperatur display and cv switching:
Evo_2_23
|
| 15 months ago |
Ideenmodellierer |
Added autofocus for BF Navigation view:
Evo_2_23
|
| 15 months ago |
Ideenmodellierer |
Added event based display changes for big font view:
Evo_2_23
|
| 15 months ago |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Activated work gas for (p)scr mode:
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not:
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Changes wording from travel gas to work gas to use same wording as for other OSTCs
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Added CO2 display to T3 Bigfont view:
Evo_2_23
|
| 16 months ago |
Ideenmodellierer |
Moved CO2 Menu from Xtra to Hardware:
Evo_2_23
|
| 17 months ago |
Ideenmodellierer |
Bugfix Line order of info screen with flip screen active:
Evo_2_23
|
| 17 months ago |
Ideenmodellierer |
Bugfix Flipscreen visualization:
|
| 17 months ago |
Ideenmodellierer |
Bugfix Flipscreen visualization:
Evo_2_23
|
| 17 months ago |
Ideenmodellierer |
Starting 'Evo_2_23' branch
Evo_2_23
|
| 17 months ago |
heinrichsweikamp |
User Test
|
| 18 months ago |
heinrichsweikamp |
1.6.5 release
|
| 18 months ago |
Ideenmodellierer |
Split definition of custom views:
|
| 18 months ago |
Ideenmodellierer |
Added debug information in case an error in the settings has been detected:
|
| 18 months ago |
heinrichsweikamp |
1.6.4 release
|
| 18 months ago |
heinrichsweikamp |
Testing build
|
| 18 months ago |
heinrichsweikamp |
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
|
| 18 months ago |
Ideenmodellierer |
Bugfix CustomView selection during dive mode:
|
| 18 months ago |
Ideenmodellierer |
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
|
| 18 months ago |
Ideenmodellierer |
Used real sensor state in simulation:
|
| 18 months ago |
heinrichsweikamp |
Testing build
|
| 18 months ago |
Ideenmodellierer |
Added function to skip lines which are not needed for operation:
|
| 18 months ago |
Ideenmodellierer |
Only jump to Sensor view during charging if sensors are connected:
|
| 18 months ago |
Ideenmodellierer |
DevBugfix CO2 sensor in streaming mode:
|
| 19 months ago |
heinrichsweikamp |
Testing build
|
| 19 months ago |
heinrichsweikamp |
Zusammenf?hren
|
| 19 months ago |
heinrichsweikamp |
Update Firmware version number
|
| 19 months ago |
heinrichsweikamp |
Adds a simple countdown timer, available as a custom view in surface and dive mode.
|
| 19 months ago |
Ideenmodellierer |
Cleanup initialisation code:
|
| 19 months ago |
Ideenmodellierer |
Cleanup initialisation / deinitialization:
|
| 19 months ago |
Ideenmodellierer |
Removed dependency to protocol setting:
|
| 19 months ago |
Ideenmodellierer |
Update RTE version number
|
| 19 months ago |
Ideenmodellierer |
Cleanup warnings
|
| 19 months ago |
Ideenmodellierer |
Added CO2 mirrow instance:
|
| 19 months ago |
Ideenmodellierer |
Migrated CO2 protocol implementation to new format:
|
| 19 months ago |
Ideenmodellierer |
Use mirror sensortype for visualization:
|
| 19 months ago |
Ideenmodellierer |
Expanded Sensor map structure:
|
| 19 months ago |
Ideenmodellierer |
Moved DiveO2 sensor specific funtionality into separated file:
|
| 19 months ago |
Ideenmodellierer |
Restructure UART based sensor handling:
|
| 19 months ago |
Ideenmodellierer |
Bugfix PSCR Settings in Simulator Mode:
|
| 19 months ago |
heinrichsweikamp |
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
|
| 19 months ago |
heinrichsweikamp |
update current build for testing
|
| 20 months ago |
heinrichsweikamp |
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
|
| 20 months ago |
heinrichsweikamp |
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
|
| 20 months ago |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
| 21 months ago |
Ideenmodellierer |
Dev Bugfx Empty buffer indication and stability improvments:
|
| 21 months ago |
Ideenmodellierer |
Cleanup sensor data interface:
|
| 21 months ago |
heinrichsweikamp |
Change support from Pyroscience -> DiveO2 sensors
|
| 21 months ago |
Ideenmodellierer |
Bugfixloop UART multiplexer integration:
|
| 21 months ago |
Ideenmodellierer |
Update digital O2 sensor information:
|
| 21 months ago |
Ideenmodellierer |
Sensor status support for multiplexed DiveO2 sensors:
|
| 21 months ago |
Ideenmodellierer |
Update real multiplexer implementation:
|
| 22 months ago |
Ideenmodellierer |
Discovery<=>SmallCPU inferface update:
|
| 22 months ago |
Ideenmodellierer |
Added UART multiplexer support for DiveO2:
|
| 22 months ago |
heinrichsweikamp |
Zusammenf?hren
|
| 22 months ago |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
| 22 months ago |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| 22 months ago |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
| 22 months ago |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
| 22 months ago |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
| 23 months ago |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
| 23 months ago |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
| 23 months ago |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| 23 months ago |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
| 23 months ago |
heinrichsweikamp |
1.6.2 release
|
| 23 months ago |
heinrichsweikamp |
Update build for testing
|
| 23 months ago |
heinrichsweikamp |
change button default responsiveness to 100
|
| 23 months ago |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| 24 months ago |
heinrichsweikamp |
Update build for testing
|
| 24 months ago |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
| 24 months ago |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| 24 months ago |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| 24 months ago |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
| 2023-03-17 |
heinrichsweikamp |
Some compass improvements from mikeller
|
| 2023-03-15 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| 2023-03-07 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
| 2023-03-07 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
| 2023-03-07 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
| 2023-03-07 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
| 2023-03-07 |
Ideenmodellierer |
Updated outdated comment
|
| 2023-03-07 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
| 2023-03-13 |
Ideenmodellierer |
resolv merge
|
| 2023-03-05 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
| 2023-03-13 |
Ideenmodellierer |
Added enum for Co2 display
|
| 2023-03-05 |
Ideenmodellierer |
Added display of co2 ppm values:
|
| 2023-03-05 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
| 2023-02-21 |
Ideenmodellierer |
Code cleanup sensors under development:
|
| 2023-02-19 |
Ideenmodellierer |
Update Sentinel protocol:
|
| 2023-02-19 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
| 2023-02-19 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| 2023-02-19 |
Ideenmodellierer |
Update Sentinel protocol:
|
| 2023-02-02 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| 2023-02-02 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| 2023-02-02 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| 2023-02-02 |
Ideenmodellierer |
Added data init function for external interface:
|
| 2023-03-06 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
| 2023-03-03 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
| 2023-02-14 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
| 2023-01-15 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
| 2023-01-15 |
Ideenmodellierer |
Optical sensor as default:
|
| 2023-01-15 |
Ideenmodellierer |
Fix compiler switch:
|
| 2023-01-15 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
| 2023-01-14 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
| 2023-01-14 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
| 2023-01-14 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| 2023-01-14 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
| 2023-01-14 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
| 2023-01-07 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
| 2023-01-05 |
Ideenmodellierer |
Development feature: external pressure sensor
|
| 2023-01-05 |
Ideenmodellierer |
DigO2 added raw data request:
|
| 2023-01-05 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
| 2023-01-05 |
Ideenmodellierer |
DigO2 added raw data request:
|
| 2023-01-03 |
Ideenmodellierer |
Bugfix set date (year):
|
| 2022-11-27 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
| 2022-11-20 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
| 2022-11-20 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
| 2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
| 2022-11-20 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
| 2022-11-08 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
| 2022-11-08 |
Ideenmodellierer |
Extension scrubber time:
|
| 2022-11-08 |
Ideenmodellierer |
Bugfix compass bearing:
|
| 2022-11-03 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| 2022-11-03 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| 2022-11-03 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
| 2022-11-01 |
Ideenmodellierer |
Bugfix release frame:
|
| 2022-10-28 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
| 2022-10-28 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
| 2022-10-28 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
| 2022-10-28 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
| 2022-10-18 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
| 2022-10-18 |
Ideenmodellierer |
Cleanup warnings:
|
| 2022-09-25 |
Ideenmodellierer |
Bugfix Empty menu:
|
| 2022-09-25 |
Ideenmodellierer |
Improvment key event detection:
|
| 2022-08-19 |
heinrichsweikamp |
Merge
|
| 2022-08-19 |
heinrichsweikamp |
1.6.0 release
Betatest
|
| 2022-08-06 |
heinrichsweikamp |
Update current build for testing
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
| 2022-08-05 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
| 2022-08-03 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
| 2022-06-02 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
| 2022-05-16 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
| 2022-04-25 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
| 2022-04-25 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
| 2022-04-25 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
| 2022-04-22 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
| 2022-04-21 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
| 2022-04-20 |
Jan Mulder |
Move include file to common to ...
Betatest
|
| 2021-11-22 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
| 2022-03-30 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
| 2022-03-30 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
| 2022-03-30 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Added Charging view:
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| 2022-03-12 |
Ideenmodellierer |
Increased version number
Betatest
|
| 2022-03-12 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
| 2021-12-24 |
heinrichsweikamp |
update test build
Betatest
|
| 2021-12-21 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
| 2021-12-21 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
| 2021-12-14 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| 2021-11-01 |
heinrichs weikamp |
Undo Rev. 660
|
| 2021-08-08 |
heinrichsweikamp |
Add option to reset bluetooth name
|
| 2021-04-28 |
heinrichs weikamp |
Update build file for testing
|
| 2021-04-27 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
| 2021-04-26 |
heinrichs weikamp |
Update release date
|
| 2021-04-25 |
Ideenmodellierer |
Added visualization of scrubber time:
|
| 2021-04-25 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
| 2021-04-25 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| 2021-04-25 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
| 2021-04-19 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
| 2021-04-19 |
Ideenmodellierer |
Automatik setpoint change:
|
| 2021-04-19 |
Ideenmodellierer |
Automatik setpoint change:
|
| 2021-04-19 |
Ideenmodellierer |
Bugfix consider checkbox in calculation of right aligned and centered position:
|
| 2021-04-19 |
Ideenmodellierer |
Motion detection: Enable focus after focus calibration:
|
| 2021-04-13 |
Ideenmodellierer |
Integrated selection of bailout in the diluent selection page:
|
| 2021-04-13 |
Ideenmodellierer |
Remove battery charge counter from information menu:
|
| 2021-04-13 |
Ideenmodellierer |
Small changes in charger state handling:
|
| 2021-03-30 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
| 2021-03-24 |
Ideenmodellierer |
Reimplemented charger status generation (deactivated):
|
| 2021-03-24 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
| 2021-03-11 |
Ideenmodellierer |
Development Bugfix Deco bars not shown after last deco stop passed:
|
| 2021-03-11 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
| 2021-02-25 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
| 2021-02-24 |
Ideenmodellierer |
Added last measured PPO2 value to sensor selection dialog:
|
| 2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
| 2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
| 2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
| 2021-02-24 |
Ideenmodellierer |
Enable sensor check for Analog PPO2 mode:
|
| 2021-02-23 |
Ideenmodellierer |
Added menu structure to allow ppo2 modification in simulator mode:
|
| 2021-02-23 |
Ideenmodellierer |
Warnings:
|
| 2021-02-23 |
Ideenmodellierer |
Warnings:
|
| 2021-02-23 |
Ideenmodellierer |
Warnings:
|
| 2021-02-23 |
Ideenmodellierer |
Added functionality to add ppo2 mV offset:
|
| 2021-02-12 |
Ideenmodellierer |
Added compile switch for T3_PROFILE menu operation option
|
| 2021-02-12 |
Ideenmodellierer |
Improve in / out of focus transitions:
|
| 2021-02-12 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
| 2021-02-08 |
Ideenmodellierer |
Switch Sector / Scroll detection to vector implementation:
|
| 2021-02-07 |
Ideenmodellierer |
Development bugfix: Marker in standard t3 view drawn in wrong direction
|
| 2021-02-07 |
Ideenmodellierer |
Improvment frame Handling:
|
| 2021-02-03 |
Ideenmodellierer |
Adjustments for flipped display view:
|
| 2021-02-03 |
Ideenmodellierer |
Use roll and pitch agles in 0-360 format:
|
| 2021-01-27 |
Ideenmodellierer |
Added minilog functions to allow marker synchronisation:
|
| 2021-01-27 |
Ideenmodellierer |
Added t3 quick menu for marker synchronisation:
|
| 2021-01-27 |
Ideenmodellierer |
Development bugfix: focus state not remembered:
|
| 2021-01-27 |
Ideenmodellierer |
Development bugfix: Low battery warning was interpretated as marker:
|
| 2021-01-27 |
Ideenmodellierer |
Development bugfix: show replay symbol only for the selected dive:
|
| 2021-01-27 |
Ideenmodellierer |
Moved non critical functions from timer interrupt to main loop:
|
| 2021-01-20 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
| 2021-01-15 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
| 2021-01-15 |
Ideenmodellierer |
Bugfix inverted whitspace:
|
| 2021-01-14 |
Ideenmodellierer |
Suspend MotionDetection events while diver is operationg the OSTC:
|
| 2021-01-14 |
Ideenmodellierer |
Added access to logbook marker data:
|
| 2021-01-14 |
Ideenmodellierer |
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
|
| 2021-02-05 |
heinrichsweikamp |
Update RTE required value for release
|
| 2021-02-05 |
heinrichsweikamp |
Added tag v1.5.6 release for changeset 06ec1da5e105
|
| 2021-02-05 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
| 2021-01-07 |
heinrichsweikamp |
change O2_CALIB_FRACTION_O2 to 0.98
|
| 2021-01-06 |
Ideenmodellierer |
Merged menu items of viewport and motion control:
|
| 2021-01-06 |
Ideenmodellierer |
T3 profile view: Added visualization of deco data
|
| 2021-01-05 |
Ideenmodellierer |
Added replay data scaling in case life data is longer than replay block
|
| 2021-01-04 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
| 2021-01-04 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
| 2021-01-04 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
| 2021-01-04 |
Ideenmodellierer |
New replay block for T3 profile:
|
| 2021-01-04 |
Ideenmodellierer |
MotionControl-Sector: Map sectors during switch T7 <=> T3:
|
| 2021-01-04 |
Ideenmodellierer |
Added functionality to select a dive to be shown in the T3 profile view:
|
| 2021-01-04 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
| 2021-01-04 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
| 2021-01-04 |
Ideenmodellierer |
Added PrintGraph option to skip invalid data entries:
|
| 2021-01-03 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
| 2021-01-06 |
heinrichsweikamp |
Minor: Comment translation into English
|
| 2020-12-22 |
Ideenmodellierer |
Align VPM tag in log list to be at same position as GF tag:
|
| 2020-12-17 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
| 2020-12-17 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
| 2020-12-16 |
heinrichsweikamp |
update ostc4pack sample files
|
| 2020-12-13 |
Ideenmodellierer |
Motion control: Jump back to primary view if focus is lost:
|
| 2020-12-13 |
Ideenmodellierer |
Reduced view angle and number of vusiualized custom views in setor mode:
|
| 2020-12-12 |
Ideenmodellierer |
Added option for 100% o2 calibration:
|
| 2020-12-12 |
Ideenmodellierer |
Solved minor warnings
|
| 2020-12-12 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
| 2020-12-12 |
Ideenmodellierer |
Added ex Interface measurement restart in case of i2c disturbance:
|
| 2020-12-12 |
Ideenmodellierer |
Bugfix bad resolution of compass LSM303AGR:
|
| 2020-12-03 |
heinrichsweikamp |
Minor: Functional inert cleanup of some unused variables
|
| 2020-11-29 |
Ideenmodellierer |
Rework pitch detection:
|
| 2020-11-29 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
| 2020-11-29 |
Ideenmodellierer |
Return to o2 values:
|
| 2020-11-29 |
Ideenmodellierer |
Change style of viewport calibration menu:
|
| 2020-11-25 |
Ideenmodellierer |
Improved focus detection:
|
| 2020-11-25 |
Ideenmodellierer |
Update String "Blickwinkel":
|
| 2020-11-25 |
Ideenmodellierer |
Added debug view to viewport calibration:
|
| 2020-11-25 |
Ideenmodellierer |
Reactivate compass parameter stored in NVM:
|
| 2020-11-30 |
Ideenmodellierer |
Try to reduce legth of log entry string:
|
| 2020-11-30 |
Ideenmodellierer |
Added new section "lower.font":
|
| 2020-11-29 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
| 2020-11-24 |
izzni |
-Add 12HR Time Support
|
| 2020-11-21 |
heinrichsweikamp |
add current build
|
| 2020-11-15 |
Ideenmodellierer |
Bugfix center / right alignment if dualfont is used:
|
| 2020-11-15 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
| 2020-11-15 |
Ideenmodellierer |
Refine o2 sensor diagnostic functions:
|
| 2020-11-15 |
Ideenmodellierer |
Added ADC sensor interface to O2 sensore menu structure:
|
| 2020-11-15 |
Ideenmodellierer |
Solved minor warnings
|
| 2020-11-15 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
| 2020-11-15 |
Ideenmodellierer |
Check if HW evaluation was performed:
|
| 2020-11-12 |
Ideenmodellierer |
Changed operation mode of RecoverSampleIndex:
|
| 2020-11-12 |
Ideenmodellierer |
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
|
| 2020-11-12 |
Ideenmodellierer |
Switch source of o2 sensor data depending on availability of external ADC:
|
| 2020-11-12 |
Ideenmodellierer |
Added HW_Info to Discovery <=> RTE data exchange:
|
| 2020-11-12 |
Ideenmodellierer |
Added external ADC interface functionality (MCP3424):
|
| 2020-11-08 |
Ideenmodellierer |
Added color indicator for focus state:
|
| 2020-11-08 |
Ideenmodellierer |
Added menu structure to acces viewport calibration:
|
| 2020-11-08 |
Ideenmodellierer |
Added viewport functionality:
|
| 2020-11-08 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
| 2020-11-08 |
Ideenmodellierer |
Only execute motion detection functions if features is enabled:
|
| 2020-11-08 |
Ideenmodellierer |
Update roll and pitch value in simulation mode:
|
| 2020-11-02 |
Ideenmodellierer |
Added viewport calibration to dive menu:
|
| 2020-11-02 |
Ideenmodellierer |
Added new settings for Viewport:
|
| 2020-11-03 |
heinrichsweikamp |
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
|
| 2020-11-02 |
heinrichsweikamp |
add current build
|
| 2020-10-11 |
Ideenmodellierer |
Shortend t3 view names:
|
| 2020-10-10 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
| 2020-10-10 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
| 2020-10-10 |
Ideenmodellierer |
Bugfix return from submenu in t3 view:
|
| 2020-10-10 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| 2020-10-10 |
Ideenmodellierer |
BugFix firmware downgrade to version with less settings:
|
| 2020-10-07 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
| 2020-10-07 |
Ideenmodellierer |
Changed visualization of Depth / temperatur / debugview entry
|
| 2020-10-07 |
Ideenmodellierer |
Increased max value for surface pressure:
|
| 2020-10-04 |
heinrichsweikamp |
Added tag 1.5.5 release for changeset 02e7e11fdbe8
|
| 2020-09-25 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
| 2020-09-16 |
heinrichsweikamp |
add current build
|
| 2020-09-15 |
Ideenmodellierer |
Bugfix custom view selection dialog:
|
| 2020-09-15 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
| 2020-09-15 |
Ideenmodellierer |
Added skip condition in custom view selection:
|
| 2020-09-13 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
| 2020-09-13 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
| 2020-09-13 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
| 2020-09-13 |
Ideenmodellierer |
Change color ID used in strings for light grey:
|
| 2020-09-13 |
Ideenmodellierer |
Minor: Removed duplicated definition of number of available gases
|
| 2020-09-10 |
Ideenmodellierer |
Changed string for data view selections:
|
| 2020-09-10 |
Ideenmodellierer |
Added compile switch for motion control:
|
| 2020-09-10 |
Ideenmodellierer |
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
|
| 2020-09-08 |
Ideenmodellierer |
Moved custom view menu to new tab:
|
| 2020-09-06 |
Ideenmodellierer |
Reset Safety Stop display in case of a new descend:
|
| 2020-09-06 |
Ideenmodellierer |
Added T3_gaslist:
|
| 2020-09-06 |
Ideenmodellierer |
Added color coding for cv gas list:
|
| 2020-09-06 |
Ideenmodellierer |
Added quick menu function to big font view:
|
| 2020-09-06 |
Ideenmodellierer |
Added missing display of button labels in refresh function:
|
| 2020-09-16 |
heinrichsweikamp |
Properly send compass 3 into sleepmode (end-2019 hardware)
|
| 2020-08-31 |
heinrichsweikamp |
Merge
|
| 2020-08-30 |
Ideenmodellierer |
Added new strings for the selection of T3 custom views
|
| 2020-08-30 |
Ideenmodellierer |
Minor adaptions in page layout:
|
| 2020-08-30 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
| 2020-08-30 |
Ideenmodellierer |
Show page number in small letters if more than 8 tabs are active
|
| 2020-08-30 |
Ideenmodellierer |
Reimplementation of tMenuEdit_select:
|
| 2020-08-30 |
Ideenmodellierer |
Added new menu tab into call structure
|
| 2020-08-30 |
Ideenmodellierer |
Added new top level menu for customization of views
|
| 2020-08-30 |
Ideenmodellierer |
Removed second big font profile
|
| 2020-08-24 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
| 2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| 2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| 2020-08-24 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
