log

age author description
Mon, 22 May 2023 09:14:27 +0200 heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Thu, 18 May 2023 09:49:17 +0200 heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 11 May 2023 12:13:03 +0200 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:35:40 +0100 Ideenmodellierer Bugfix data synchronization after RTE start:
Sat, 07 Jan 2023 18:11:52 +0100 Ideenmodellierer Update CO2 sensor implementation:
Thu, 05 Jan 2023 18:30:06 +0100 Ideenmodellierer Development feature: external pressure sensor
Thu, 05 Jan 2023 18:27:04 +0100 Ideenmodellierer DigO2 added raw data request:
Thu, 05 Jan 2023 18:25:47 +0100 Ideenmodellierer Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:22:21 +0100 Ideenmodellierer DigO2 added raw data request:
Tue, 03 Jan 2023 19:47:12 +0100 Ideenmodellierer Bugfix set date (year):
Sun, 27 Nov 2022 15:18:00 +0100 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 20 Nov 2022 20:49:41 +0100 Ideenmodellierer Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:46:10 +0100 Ideenmodellierer Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:43:04 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:33 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:42:08 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:37:44 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:36:34 +0100 Ideenmodellierer Bugfix PSCR menu button label:
Tue, 08 Nov 2022 22:16:56 +0100 Ideenmodellierer Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 21:16:17 +0100 Ideenmodellierer Extension scrubber time:
Tue, 08 Nov 2022 21:13:14 +0100 Ideenmodellierer Bugfix compass bearing:
Thu, 03 Nov 2022 20:44:51 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:37:06 +0100 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
Tue, 01 Nov 2022 09:55:45 +0100 Ideenmodellierer Bugfix release frame:
Fri, 28 Oct 2022 20:49:21 +0200 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:32:24 +0200 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:29:37 +0200 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 19:39:20 +0200 Ideenmodellierer Bugfix display of deactivated sensors:
Tue, 18 Oct 2022 21:21:32 +0200 Ideenmodellierer Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 20:56:19 +0200 Ideenmodellierer Cleanup warnings:
Sun, 25 Sep 2022 21:13:45 +0200 Ideenmodellierer Bugfix Empty menu:
Sun, 25 Sep 2022 21:09:18 +0200 Ideenmodellierer Improvment key event detection:
Fri, 19 Aug 2022 11:30:24 +0200 heinrichsweikamp Merge
Fri, 19 Aug 2022 11:27:44 +0200 heinrichsweikamp 1.6.0 release Betatest
Sat, 06 Aug 2022 11:10:56 +0200 heinrichsweikamp Update current build for testing Betatest
Fri, 05 Aug 2022 16:04:52 +0200 Ideenmodellierer Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 15:27:01 +0200 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:26:28 +0200 Ideenmodellierer Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:22:26 +0200 Ideenmodellierer Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:15:01 +0200 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:13:29 +0200 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:10:10 +0200 Ideenmodellierer Increased version numbers: Betatest
Fri, 05 Aug 2022 14:56:17 +0200 Ideenmodellierer Bugfix Battery charge complete event: Betatest
Wed, 03 Aug 2022 18:19:03 +0200 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
Thu, 02 Jun 2022 20:24:59 +0200 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
Mon, 16 May 2022 20:50:26 +0200 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 25 Apr 2022 21:15:01 +0200 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:10:10 +0200 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:07:28 +0200 Ideenmodellierer Bugfix visualization better setpoint: Betatest
Fri, 22 Apr 2022 18:24:43 +0200 Jan Mulder cleanup: Use correct "per" symbol Betatest
Thu, 21 Apr 2022 21:02:50 +0200 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
Wed, 20 Apr 2022 20:25:04 +0200 Jan Mulder Move include file to common to ... Betatest
Mon, 22 Nov 2021 19:39:11 +0100 Jan Mulder Allow longer scrubber time Betatest
Wed, 30 Mar 2022 18:07:21 +0200 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:01:29 +0200 heinrichsweikamp Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:00:21 +0200 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
Sat, 12 Mar 2022 23:01:11 +0100 Ideenmodellierer Added Charging view: Betatest
Sat, 12 Mar 2022 22:58:22 +0100 Ideenmodellierer Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:54:26 +0100 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:49:09 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:42:56 +0100 Ideenmodellierer Increased version number Betatest
Sat, 12 Mar 2022 14:57:54 +0100 heinrichsweikamp increase version numbers for upcomming release Betatest
Fri, 24 Dec 2021 13:40:47 +0100 heinrichsweikamp update test build Betatest
Tue, 21 Dec 2021 19:36:41 +0100 Ideenmodellierer Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:32:29 +0100 Ideenmodellierer Revert Setbluetooh name changes Betatest
Tue, 14 Dec 2021 15:36:10 +0100 heinrichs weikamp PSCR Mode Betatest
Mon, 01 Nov 2021 12:39:34 +0100 heinrichs weikamp Undo Rev. 660
Sun, 08 Aug 2021 09:36:23 +0200 heinrichsweikamp Add option to reset bluetooth name
Wed, 28 Apr 2021 09:47:25 +0200 heinrichs weikamp Update build file for testing
Tue, 27 Apr 2021 21:29:26 +0200 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
Mon, 26 Apr 2021 15:03:04 +0200 heinrichs weikamp Update release date
Sun, 25 Apr 2021 20:47:01 +0200 Ideenmodellierer Added visualization of scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200 Ideenmodellierer Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:41:19 +0200 Ideenmodellierer Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:36:18 +0200 Ideenmodellierer Bugfix temperature display Logpage2:
Mon, 19 Apr 2021 20:34:53 +0200 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:20:38 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:16:24 +0200 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:14:20 +0200 Ideenmodellierer Motion detection: Enable focus after focus calibration:
Tue, 13 Apr 2021 19:25:41 +0200 Ideenmodellierer Integrated selection of bailout in the diluent selection page:
Tue, 13 Apr 2021 19:21:14 +0200 Ideenmodellierer Remove battery charge counter from information menu:
Tue, 13 Apr 2021 19:18:32 +0200 Ideenmodellierer Small changes in charger state handling:
Tue, 30 Mar 2021 10:34:12 +0200 heinrichs weikamp Compile with ENABLE_CHARGER_STATUS_V2
Wed, 24 Mar 2021 22:06:00 +0100 Ideenmodellierer Reimplemented charger status generation (deactivated):
Wed, 24 Mar 2021 21:28:41 +0100 Ideenmodellierer Do not show focus indicator in case motion detection is suspended:
Thu, 11 Mar 2021 21:45:22 +0100 Ideenmodellierer Development Bugfix Deco bars not shown after last deco stop passed:
Thu, 11 Mar 2021 21:43:43 +0100 Ideenmodellierer Development bugfix Viewport settings:
Thu, 25 Feb 2021 12:20:43 +0100 heinrichsweikamp add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
Wed, 24 Feb 2021 21:45:35 +0100 Ideenmodellierer Added last measured PPO2 value to sensor selection dialog:
Wed, 24 Feb 2021 21:04:07 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:54 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:22 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 19:18:26 +0100 Ideenmodellierer Enable sensor check for Analog PPO2 mode:
Tue, 23 Feb 2021 21:58:18 +0100 Ideenmodellierer Added menu structure to allow ppo2 modification in simulator mode:
Tue, 23 Feb 2021 21:55:52 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:55:26 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:54:56 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:53:24 +0100 Ideenmodellierer Added functionality to add ppo2 mV offset:
Fri, 12 Feb 2021 21:46:36 +0100 Ideenmodellierer Added compile switch for T3_PROFILE menu operation option
Fri, 12 Feb 2021 21:43:27 +0100 Ideenmodellierer Improve in / out of focus transitions:
Fri, 12 Feb 2021 21:37:50 +0100 Ideenmodellierer Added option to select sensitivity of focus detection:
Mon, 08 Feb 2021 21:35:46 +0100 Ideenmodellierer Switch Sector / Scroll detection to vector implementation:
Sun, 07 Feb 2021 22:05:32 +0100 Ideenmodellierer Development bugfix: Marker in standard t3 view drawn in wrong direction
Sun, 07 Feb 2021 22:04:43 +0100 Ideenmodellierer Improvment frame Handling:
Wed, 03 Feb 2021 21:45:48 +0100 Ideenmodellierer Adjustments for flipped display view:
Wed, 03 Feb 2021 21:44:22 +0100 Ideenmodellierer Use roll and pitch agles in 0-360 format:
Wed, 27 Jan 2021 22:12:44 +0100 Ideenmodellierer Added minilog functions to allow marker synchronisation:
Wed, 27 Jan 2021 22:10:11 +0100 Ideenmodellierer Added t3 quick menu for marker synchronisation:
Wed, 27 Jan 2021 22:04:45 +0100 Ideenmodellierer Development bugfix: focus state not remembered:
Wed, 27 Jan 2021 22:03:11 +0100 Ideenmodellierer Development bugfix: Low battery warning was interpretated as marker:
Wed, 27 Jan 2021 21:58:46 +0100 Ideenmodellierer Development bugfix: show replay symbol only for the selected dive:
Wed, 27 Jan 2021 21:56:48 +0100 Ideenmodellierer Moved non critical functions from timer interrupt to main loop:
Wed, 20 Jan 2021 20:05:05 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:33:07 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:20:29 +0100 Ideenmodellierer Bugfix inverted whitspace:
Thu, 14 Jan 2021 21:25:15 +0100 Ideenmodellierer Suspend MotionDetection events while diver is operationg the OSTC:
Thu, 14 Jan 2021 20:38:28 +0100 Ideenmodellierer Added access to logbook marker data:
Thu, 14 Jan 2021 19:17:28 +0100 Ideenmodellierer Bugfix: CalibViewport were shown even in case the compile switch had not been set:
Fri, 05 Feb 2021 14:53:50 +0100 heinrichsweikamp Update RTE required value for release
Fri, 05 Feb 2021 14:50:18 +0100 heinrichsweikamp Added tag v1.5.6 release for changeset 06ec1da5e105
Fri, 05 Feb 2021 14:50:05 +0100 heinrichsweikamp 1.5.6 release v1.5.6 release
Thu, 07 Jan 2021 09:53:04 +0100 heinrichsweikamp change O2_CALIB_FRACTION_O2 to 0.98
Wed, 06 Jan 2021 21:01:00 +0100 Ideenmodellierer Merged menu items of viewport and motion control:
Wed, 06 Jan 2021 19:41:43 +0100 Ideenmodellierer T3 profile view: Added visualization of deco data
Tue, 05 Jan 2021 20:35:01 +0100 Ideenmodellierer Added replay data scaling in case life data is longer than replay block
Mon, 04 Jan 2021 22:49:07 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 22:45:37 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:48:31 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 21:41:51 +0100 Ideenmodellierer New replay block for T3 profile:
Mon, 04 Jan 2021 21:38:28 +0100 Ideenmodellierer MotionControl-Sector: Map sectors during switch T7 <=> T3:
Mon, 04 Jan 2021 21:35:38 +0100 Ideenmodellierer Added functionality to select a dive to be shown in the T3 profile view:
Mon, 04 Jan 2021 21:32:39 +0100 Ideenmodellierer Bugfix Selection of primary view:
Mon, 04 Jan 2021 21:30:04 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:24:24 +0100 Ideenmodellierer Added PrintGraph option to skip invalid data entries:
Sun, 03 Jan 2021 14:43:16 +0100 Ideenmodellierer MotionCtrl - Sectorview Map sectors directly to custom views:
Wed, 06 Jan 2021 22:02:49 +0100 heinrichsweikamp Minor: Comment translation into English
Tue, 22 Dec 2020 22:23:11 +0100 Ideenmodellierer Align VPM tag in log list to be at same position as GF tag:
Thu, 17 Dec 2020 10:58:28 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Thu, 17 Dec 2020 09:52:12 +0100 heinrichsweikamp Update current build, "RTErequired" value and release date
Wed, 16 Dec 2020 09:43:11 +0100 heinrichsweikamp update ostc4pack sample files
Sun, 13 Dec 2020 18:31:40 +0100 Ideenmodellierer Motion control: Jump back to primary view if focus is lost:
Sun, 13 Dec 2020 18:29:12 +0100 Ideenmodellierer Reduced view angle and number of vusiualized custom views in setor mode:
Sat, 12 Dec 2020 21:05:11 +0100 Ideenmodellierer Added option for 100% o2 calibration:
Sat, 12 Dec 2020 20:54:31 +0100 Ideenmodellierer Solved minor warnings
Sat, 12 Dec 2020 20:52:58 +0100 Ideenmodellierer Show Fallback if no valid sensor value is available:
Sat, 12 Dec 2020 19:18:57 +0100 Ideenmodellierer Added ex Interface measurement restart in case of i2c disturbance:
Sat, 12 Dec 2020 19:16:37 +0100 Ideenmodellierer Bugfix bad resolution of compass LSM303AGR:
Thu, 03 Dec 2020 13:17:32 +0100 heinrichsweikamp Minor: Functional inert cleanup of some unused variables
Sun, 29 Nov 2020 23:02:11 +0100 Ideenmodellierer Rework pitch detection:
Sun, 29 Nov 2020 22:58:11 +0100 Ideenmodellierer Handle o2 voltage values < 0.5mV as invalid:
Sun, 29 Nov 2020 22:55:31 +0100 Ideenmodellierer Return to o2 values:
Sun, 29 Nov 2020 22:53:33 +0100 Ideenmodellierer Change style of viewport calibration menu:
Wed, 25 Nov 2020 20:26:01 +0100 Ideenmodellierer Improved focus detection:
Wed, 25 Nov 2020 20:19:50 +0100 Ideenmodellierer Update String "Blickwinkel":
Wed, 25 Nov 2020 20:18:22 +0100 Ideenmodellierer Added debug view to viewport calibration:
Wed, 25 Nov 2020 20:16:20 +0100 Ideenmodellierer Reactivate compass parameter stored in NVM:
Mon, 30 Nov 2020 20:55:23 +0100 Ideenmodellierer Try to reduce legth of log entry string:
Mon, 30 Nov 2020 20:52:49 +0100 Ideenmodellierer Added new section "lower.font":
Sun, 29 Nov 2020 11:41:03 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Tue, 24 Nov 2020 13:22:23 -0600 izzni -Add 12HR Time Support
Sat, 21 Nov 2020 17:41:59 +0100 heinrichsweikamp add current build
Sun, 15 Nov 2020 20:12:19 +0100 Ideenmodellierer Bugfix center / right alignment if dualfont is used:
Sun, 15 Nov 2020 20:09:31 +0100 Ideenmodellierer Bugfix One or more deactivated sensors hide sensor display:
Sun, 15 Nov 2020 20:01:56 +0100 Ideenmodellierer Refine o2 sensor diagnostic functions:
Sun, 15 Nov 2020 19:58:14 +0100 Ideenmodellierer Added ADC sensor interface to O2 sensore menu structure:
Sun, 15 Nov 2020 19:54:36 +0100 Ideenmodellierer Solved minor warnings
Sun, 15 Nov 2020 19:53:09 +0100 Ideenmodellierer Added O2 sensor source and calibration parameters to setting structure
Sun, 15 Nov 2020 19:52:03 +0100 Ideenmodellierer Check if HW evaluation was performed:
Thu, 12 Nov 2020 20:06:04 +0100 Ideenmodellierer Changed operation mode of RecoverSampleIndex:
Thu, 12 Nov 2020 20:03:00 +0100 Ideenmodellierer Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
Thu, 12 Nov 2020 19:54:58 +0100 Ideenmodellierer Switch source of o2 sensor data depending on availability of external ADC:
Thu, 12 Nov 2020 19:48:28 +0100 Ideenmodellierer Added HW_Info to Discovery <=> RTE data exchange:
Thu, 12 Nov 2020 19:46:03 +0100 Ideenmodellierer Added external ADC interface functionality (MCP3424):
Sun, 08 Nov 2020 18:49:54 +0100 Ideenmodellierer Added color indicator for focus state:
Sun, 08 Nov 2020 18:46:46 +0100 Ideenmodellierer Added menu structure to acces viewport calibration:
Sun, 08 Nov 2020 18:43:19 +0100 Ideenmodellierer Added viewport functionality:
Sun, 08 Nov 2020 18:38:53 +0100 Ideenmodellierer Make sure motion detection settings are set to default values:
Sun, 08 Nov 2020 18:36:02 +0100 Ideenmodellierer Only execute motion detection functions if features is enabled:
Sun, 08 Nov 2020 16:38:43 +0100 Ideenmodellierer Update roll and pitch value in simulation mode:
Mon, 02 Nov 2020 21:17:45 +0100 Ideenmodellierer Added viewport calibration to dive menu:
Mon, 02 Nov 2020 21:15:42 +0100 Ideenmodellierer Added new settings for Viewport:
Tue, 03 Nov 2020 12:47:51 +0100 heinrichsweikamp Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
Mon, 02 Nov 2020 12:13:02 +0100 heinrichsweikamp add current build
Sun, 11 Oct 2020 18:33:19 +0200 Ideenmodellierer Shortend t3 view names:
Sat, 10 Oct 2020 21:02:05 +0200 Ideenmodellierer Added new t3 view showing first deco stop and tts in parallel:
Sat, 10 Oct 2020 18:34:10 +0200 Ideenmodellierer Added default view selection and auto return to view to t3 visualization:
Sat, 10 Oct 2020 18:30:13 +0200 Ideenmodellierer Bugfix return from submenu in t3 view:
Sat, 10 Oct 2020 16:59:18 +0200 Ideenmodellierer Added inertia simulation for compass heading:
Sat, 10 Oct 2020 13:51:44 +0200 Ideenmodellierer BugFix firmware downgrade to version with less settings: