Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 774: (0) -300 -100 -48 +48 +100 tip
age author description
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
less more | rev 774: (0) -300 -100 -48 +48 +100 tip