log

age author description
Fri, 05 Aug 2022 15:10:10 +0200 Ideenmodellierer Increased version numbers: Betatest
Fri, 05 Aug 2022 14:56:17 +0200 Ideenmodellierer Bugfix Battery charge complete event: Betatest
Wed, 03 Aug 2022 18:19:03 +0200 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
Thu, 02 Jun 2022 20:24:59 +0200 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
Mon, 16 May 2022 20:50:26 +0200 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 25 Apr 2022 21:15:01 +0200 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:10:10 +0200 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:07:28 +0200 Ideenmodellierer Bugfix visualization better setpoint: Betatest
Fri, 22 Apr 2022 18:24:43 +0200 Jan Mulder cleanup: Use correct "per" symbol Betatest
Thu, 21 Apr 2022 21:02:50 +0200 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
Wed, 20 Apr 2022 20:25:04 +0200 Jan Mulder Move include file to common to ... Betatest
Mon, 22 Nov 2021 19:39:11 +0100 Jan Mulder Allow longer scrubber time Betatest
Wed, 30 Mar 2022 18:07:21 +0200 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:01:29 +0200 heinrichsweikamp Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:00:21 +0200 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
Sat, 12 Mar 2022 23:01:11 +0100 Ideenmodellierer Added Charging view: Betatest
Sat, 12 Mar 2022 22:58:22 +0100 Ideenmodellierer Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:54:26 +0100 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:49:09 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:42:56 +0100 Ideenmodellierer Increased version number Betatest
Sat, 12 Mar 2022 14:57:54 +0100 heinrichsweikamp increase version numbers for upcomming release Betatest
Fri, 24 Dec 2021 13:40:47 +0100 heinrichsweikamp update test build Betatest
Tue, 21 Dec 2021 19:36:41 +0100 Ideenmodellierer Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:32:29 +0100 Ideenmodellierer Revert Setbluetooh name changes Betatest
Tue, 14 Dec 2021 15:36:10 +0100 heinrichs weikamp PSCR Mode Betatest
Mon, 01 Nov 2021 12:39:34 +0100 heinrichs weikamp Undo Rev. 660
Sun, 08 Aug 2021 09:36:23 +0200 heinrichsweikamp Add option to reset bluetooth name
Wed, 28 Apr 2021 09:47:25 +0200 heinrichs weikamp Update build file for testing
Tue, 27 Apr 2021 21:29:26 +0200 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
Mon, 26 Apr 2021 15:03:04 +0200 heinrichs weikamp Update release date
Sun, 25 Apr 2021 20:47:01 +0200 Ideenmodellierer Added visualization of scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200 Ideenmodellierer Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:41:19 +0200 Ideenmodellierer Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:36:18 +0200 Ideenmodellierer Bugfix temperature display Logpage2:
Mon, 19 Apr 2021 20:34:53 +0200 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:20:38 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:16:24 +0200 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:14:20 +0200 Ideenmodellierer Motion detection: Enable focus after focus calibration:
Tue, 13 Apr 2021 19:25:41 +0200 Ideenmodellierer Integrated selection of bailout in the diluent selection page:
Tue, 13 Apr 2021 19:21:14 +0200 Ideenmodellierer Remove battery charge counter from information menu:
Tue, 13 Apr 2021 19:18:32 +0200 Ideenmodellierer Small changes in charger state handling:
Tue, 30 Mar 2021 10:34:12 +0200 heinrichs weikamp Compile with ENABLE_CHARGER_STATUS_V2
Wed, 24 Mar 2021 22:06:00 +0100 Ideenmodellierer Reimplemented charger status generation (deactivated):
Wed, 24 Mar 2021 21:28:41 +0100 Ideenmodellierer Do not show focus indicator in case motion detection is suspended:
Thu, 11 Mar 2021 21:45:22 +0100 Ideenmodellierer Development Bugfix Deco bars not shown after last deco stop passed:
Thu, 11 Mar 2021 21:43:43 +0100 Ideenmodellierer Development bugfix Viewport settings:
Thu, 25 Feb 2021 12:20:43 +0100 heinrichsweikamp add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
Wed, 24 Feb 2021 21:45:35 +0100 Ideenmodellierer Added last measured PPO2 value to sensor selection dialog:
Wed, 24 Feb 2021 21:04:07 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:54 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 21:03:22 +0100 Ideenmodellierer Debounce fallback warning:
Wed, 24 Feb 2021 19:18:26 +0100 Ideenmodellierer Enable sensor check for Analog PPO2 mode:
Tue, 23 Feb 2021 21:58:18 +0100 Ideenmodellierer Added menu structure to allow ppo2 modification in simulator mode:
Tue, 23 Feb 2021 21:55:52 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:55:26 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:54:56 +0100 Ideenmodellierer Warnings:
Tue, 23 Feb 2021 21:53:24 +0100 Ideenmodellierer Added functionality to add ppo2 mV offset:
Fri, 12 Feb 2021 21:46:36 +0100 Ideenmodellierer Added compile switch for T3_PROFILE menu operation option
Fri, 12 Feb 2021 21:43:27 +0100 Ideenmodellierer Improve in / out of focus transitions:
Fri, 12 Feb 2021 21:37:50 +0100 Ideenmodellierer Added option to select sensitivity of focus detection:
Mon, 08 Feb 2021 21:35:46 +0100 Ideenmodellierer Switch Sector / Scroll detection to vector implementation:
Sun, 07 Feb 2021 22:05:32 +0100 Ideenmodellierer Development bugfix: Marker in standard t3 view drawn in wrong direction
Sun, 07 Feb 2021 22:04:43 +0100 Ideenmodellierer Improvment frame Handling:
Wed, 03 Feb 2021 21:45:48 +0100 Ideenmodellierer Adjustments for flipped display view:
Wed, 03 Feb 2021 21:44:22 +0100 Ideenmodellierer Use roll and pitch agles in 0-360 format:
Wed, 27 Jan 2021 22:12:44 +0100 Ideenmodellierer Added minilog functions to allow marker synchronisation:
Wed, 27 Jan 2021 22:10:11 +0100 Ideenmodellierer Added t3 quick menu for marker synchronisation:
Wed, 27 Jan 2021 22:04:45 +0100 Ideenmodellierer Development bugfix: focus state not remembered:
Wed, 27 Jan 2021 22:03:11 +0100 Ideenmodellierer Development bugfix: Low battery warning was interpretated as marker:
Wed, 27 Jan 2021 21:58:46 +0100 Ideenmodellierer Development bugfix: show replay symbol only for the selected dive:
Wed, 27 Jan 2021 21:56:48 +0100 Ideenmodellierer Moved non critical functions from timer interrupt to main loop:
Wed, 20 Jan 2021 20:05:05 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:33:07 +0100 Ideenmodellierer Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:20:29 +0100 Ideenmodellierer Bugfix inverted whitspace:
Thu, 14 Jan 2021 21:25:15 +0100 Ideenmodellierer Suspend MotionDetection events while diver is operationg the OSTC:
Thu, 14 Jan 2021 20:38:28 +0100 Ideenmodellierer Added access to logbook marker data:
Thu, 14 Jan 2021 19:17:28 +0100 Ideenmodellierer Bugfix: CalibViewport were shown even in case the compile switch had not been set:
Fri, 05 Feb 2021 14:53:50 +0100 heinrichsweikamp Update RTE required value for release
Fri, 05 Feb 2021 14:50:18 +0100 heinrichsweikamp Added tag v1.5.6 release for changeset 06ec1da5e105
Fri, 05 Feb 2021 14:50:05 +0100 heinrichsweikamp 1.5.6 release v1.5.6 release
Thu, 07 Jan 2021 09:53:04 +0100 heinrichsweikamp change O2_CALIB_FRACTION_O2 to 0.98
Wed, 06 Jan 2021 21:01:00 +0100 Ideenmodellierer Merged menu items of viewport and motion control:
Wed, 06 Jan 2021 19:41:43 +0100 Ideenmodellierer T3 profile view: Added visualization of deco data
Tue, 05 Jan 2021 20:35:01 +0100 Ideenmodellierer Added replay data scaling in case life data is longer than replay block
Mon, 04 Jan 2021 22:49:07 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 22:45:37 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:48:31 +0100 Ideenmodellierer Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 21:41:51 +0100 Ideenmodellierer New replay block for T3 profile:
Mon, 04 Jan 2021 21:38:28 +0100 Ideenmodellierer MotionControl-Sector: Map sectors during switch T7 <=> T3:
Mon, 04 Jan 2021 21:35:38 +0100 Ideenmodellierer Added functionality to select a dive to be shown in the T3 profile view:
Mon, 04 Jan 2021 21:32:39 +0100 Ideenmodellierer Bugfix Selection of primary view:
Mon, 04 Jan 2021 21:30:04 +0100 Ideenmodellierer Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:24:24 +0100 Ideenmodellierer Added PrintGraph option to skip invalid data entries:
Sun, 03 Jan 2021 14:43:16 +0100 Ideenmodellierer MotionCtrl - Sectorview Map sectors directly to custom views:
Wed, 06 Jan 2021 22:02:49 +0100 heinrichsweikamp Minor: Comment translation into English
Tue, 22 Dec 2020 22:23:11 +0100 Ideenmodellierer Align VPM tag in log list to be at same position as GF tag:
Thu, 17 Dec 2020 10:58:28 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Thu, 17 Dec 2020 09:52:12 +0100 heinrichsweikamp Update current build, "RTErequired" value and release date
Wed, 16 Dec 2020 09:43:11 +0100 heinrichsweikamp update ostc4pack sample files
Sun, 13 Dec 2020 18:31:40 +0100 Ideenmodellierer Motion control: Jump back to primary view if focus is lost:
Sun, 13 Dec 2020 18:29:12 +0100 Ideenmodellierer Reduced view angle and number of vusiualized custom views in setor mode:
Sat, 12 Dec 2020 21:05:11 +0100 Ideenmodellierer Added option for 100% o2 calibration:
Sat, 12 Dec 2020 20:54:31 +0100 Ideenmodellierer Solved minor warnings
Sat, 12 Dec 2020 20:52:58 +0100 Ideenmodellierer Show Fallback if no valid sensor value is available:
Sat, 12 Dec 2020 19:18:57 +0100 Ideenmodellierer Added ex Interface measurement restart in case of i2c disturbance:
Sat, 12 Dec 2020 19:16:37 +0100 Ideenmodellierer Bugfix bad resolution of compass LSM303AGR:
Thu, 03 Dec 2020 13:17:32 +0100 heinrichsweikamp Minor: Functional inert cleanup of some unused variables
Sun, 29 Nov 2020 23:02:11 +0100 Ideenmodellierer Rework pitch detection:
Sun, 29 Nov 2020 22:58:11 +0100 Ideenmodellierer Handle o2 voltage values < 0.5mV as invalid:
Sun, 29 Nov 2020 22:55:31 +0100 Ideenmodellierer Return to o2 values:
Sun, 29 Nov 2020 22:53:33 +0100 Ideenmodellierer Change style of viewport calibration menu:
Wed, 25 Nov 2020 20:26:01 +0100 Ideenmodellierer Improved focus detection:
Wed, 25 Nov 2020 20:19:50 +0100 Ideenmodellierer Update String "Blickwinkel":
Wed, 25 Nov 2020 20:18:22 +0100 Ideenmodellierer Added debug view to viewport calibration:
Wed, 25 Nov 2020 20:16:20 +0100 Ideenmodellierer Reactivate compass parameter stored in NVM:
Mon, 30 Nov 2020 20:55:23 +0100 Ideenmodellierer Try to reduce legth of log entry string:
Mon, 30 Nov 2020 20:52:49 +0100 Ideenmodellierer Added new section "lower.font":
Sun, 29 Nov 2020 11:41:03 +0100 heinrichsweikamp Minor: Update the documentation for building the code
Tue, 24 Nov 2020 13:22:23 -0600 izzni -Add 12HR Time Support
Sat, 21 Nov 2020 17:41:59 +0100 heinrichsweikamp add current build
Sun, 15 Nov 2020 20:12:19 +0100 Ideenmodellierer Bugfix center / right alignment if dualfont is used:
Sun, 15 Nov 2020 20:09:31 +0100 Ideenmodellierer Bugfix One or more deactivated sensors hide sensor display:
Sun, 15 Nov 2020 20:01:56 +0100 Ideenmodellierer Refine o2 sensor diagnostic functions:
Sun, 15 Nov 2020 19:58:14 +0100 Ideenmodellierer Added ADC sensor interface to O2 sensore menu structure:
Sun, 15 Nov 2020 19:54:36 +0100 Ideenmodellierer Solved minor warnings
Sun, 15 Nov 2020 19:53:09 +0100 Ideenmodellierer Added O2 sensor source and calibration parameters to setting structure
Sun, 15 Nov 2020 19:52:03 +0100 Ideenmodellierer Check if HW evaluation was performed:
Thu, 12 Nov 2020 20:06:04 +0100 Ideenmodellierer Changed operation mode of RecoverSampleIndex:
Thu, 12 Nov 2020 20:03:00 +0100 Ideenmodellierer Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
Thu, 12 Nov 2020 19:54:58 +0100 Ideenmodellierer Switch source of o2 sensor data depending on availability of external ADC:
Thu, 12 Nov 2020 19:48:28 +0100 Ideenmodellierer Added HW_Info to Discovery <=> RTE data exchange:
Thu, 12 Nov 2020 19:46:03 +0100 Ideenmodellierer Added external ADC interface functionality (MCP3424):
Sun, 08 Nov 2020 18:49:54 +0100 Ideenmodellierer Added color indicator for focus state:
Sun, 08 Nov 2020 18:46:46 +0100 Ideenmodellierer Added menu structure to acces viewport calibration:
Sun, 08 Nov 2020 18:43:19 +0100 Ideenmodellierer Added viewport functionality:
Sun, 08 Nov 2020 18:38:53 +0100 Ideenmodellierer Make sure motion detection settings are set to default values:
Sun, 08 Nov 2020 18:36:02 +0100 Ideenmodellierer Only execute motion detection functions if features is enabled:
Sun, 08 Nov 2020 16:38:43 +0100 Ideenmodellierer Update roll and pitch value in simulation mode:
Mon, 02 Nov 2020 21:17:45 +0100 Ideenmodellierer Added viewport calibration to dive menu:
Mon, 02 Nov 2020 21:15:42 +0100 Ideenmodellierer Added new settings for Viewport:
Tue, 03 Nov 2020 12:47:51 +0100 heinrichsweikamp Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
Mon, 02 Nov 2020 12:13:02 +0100 heinrichsweikamp add current build
Sun, 11 Oct 2020 18:33:19 +0200 Ideenmodellierer Shortend t3 view names:
Sat, 10 Oct 2020 21:02:05 +0200 Ideenmodellierer Added new t3 view showing first deco stop and tts in parallel:
Sat, 10 Oct 2020 18:34:10 +0200 Ideenmodellierer Added default view selection and auto return to view to t3 visualization:
Sat, 10 Oct 2020 18:30:13 +0200 Ideenmodellierer Bugfix return from submenu in t3 view:
Sat, 10 Oct 2020 16:59:18 +0200 Ideenmodellierer Added inertia simulation for compass heading:
Sat, 10 Oct 2020 13:51:44 +0200 Ideenmodellierer BugFix firmware downgrade to version with less settings:
Wed, 07 Oct 2020 18:07:10 +0200 Ideenmodellierer Added center / right alignment option to custom text display:
Wed, 07 Oct 2020 17:15:27 +0200 Ideenmodellierer Changed visualization of Depth / temperatur / debugview entry
Wed, 07 Oct 2020 17:12:44 +0200 Ideenmodellierer Increased max value for surface pressure:
Sun, 04 Oct 2020 15:50:43 +0200 heinrichsweikamp Added tag 1.5.5 release for changeset 02e7e11fdbe8
Fri, 25 Sep 2020 11:13:03 +0200 heinrichsweikamp increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
Wed, 16 Sep 2020 10:52:57 +0200 heinrichsweikamp add current build
Tue, 15 Sep 2020 20:57:04 +0200 Ideenmodellierer Bugfix custom view selection dialog:
Tue, 15 Sep 2020 20:54:54 +0200 Ideenmodellierer Bugfix: No need to consider surface custom view in count of enabled view:
Tue, 15 Sep 2020 20:52:39 +0200 Ideenmodellierer Added skip condition in custom view selection:
Sun, 13 Sep 2020 20:59:38 +0200 Ideenmodellierer Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:58:37 +0200 Ideenmodellierer Do not show gases in "Off" state in custom gas list:
Sun, 13 Sep 2020 20:55:54 +0200 Ideenmodellierer Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:49:58 +0200 Ideenmodellierer Change color ID used in strings for light grey:
Sun, 13 Sep 2020 20:44:50 +0200 Ideenmodellierer Minor: Removed duplicated definition of number of available gases
Thu, 10 Sep 2020 20:52:47 +0200 Ideenmodellierer Changed string for data view selections:
Thu, 10 Sep 2020 20:51:36 +0200 Ideenmodellierer Added compile switch for motion control:
Thu, 10 Sep 2020 20:47:48 +0200 Ideenmodellierer Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Tue, 08 Sep 2020 21:24:14 +0200 Ideenmodellierer Moved custom view menu to new tab:
Sun, 06 Sep 2020 22:11:51 +0200 Ideenmodellierer Reset Safety Stop display in case of a new descend:
Sun, 06 Sep 2020 21:17:59 +0200 Ideenmodellierer Added T3_gaslist:
Sun, 06 Sep 2020 21:15:34 +0200 Ideenmodellierer Added color coding for cv gas list:
Sun, 06 Sep 2020 21:13:22 +0200 Ideenmodellierer Added quick menu function to big font view:
Sun, 06 Sep 2020 21:09:37 +0200 Ideenmodellierer Added missing display of button labels in refresh function:
Wed, 16 Sep 2020 10:30:28 +0200 heinrichsweikamp Properly send compass 3 into sleepmode (end-2019 hardware)
Mon, 31 Aug 2020 20:06:59 +0200 heinrichsweikamp Merge
Sun, 30 Aug 2020 17:31:29 +0200 Ideenmodellierer Added new strings for the selection of T3 custom views
Sun, 30 Aug 2020 17:30:54 +0200 Ideenmodellierer Minor adaptions in page layout:
Sun, 30 Aug 2020 17:26:52 +0200 Ideenmodellierer Display warning in t7 using centered strings
Sun, 30 Aug 2020 17:26:00 +0200 Ideenmodellierer Show page number in small letters if more than 8 tabs are active
Sun, 30 Aug 2020 17:23:44 +0200 Ideenmodellierer Reimplementation of tMenuEdit_select:
Sun, 30 Aug 2020 17:20:16 +0200 Ideenmodellierer Added new menu tab into call structure
Sun, 30 Aug 2020 17:19:23 +0200 Ideenmodellierer Added new top level menu for customization of views
Sun, 30 Aug 2020 17:14:31 +0200 Ideenmodellierer Removed second big font profile
Mon, 24 Aug 2020 19:59:28 +0200 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:53:27 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:39:28 +0200 Ideenmodellierer Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:36:18 +0200 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:31:05 +0200 Ideenmodellierer Added compile switch to enable / disable new BigFont layout
Mon, 24 Aug 2020 19:30:15 +0200 Ideenmodellierer Added dew parameter to enable selection of customer BigFont screens to be displayed
Mon, 24 Aug 2020 19:59:28 +0200 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:53:27 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200 Ideenmodellierer Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:39:28 +0200 Ideenmodellierer Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:36:18 +0200 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Thu, 20 Aug 2020 21:25:38 +0200 Ideenmodellierer Added compiler switch for existing debug view parameter
Mon, 10 Aug 2020 15:53:45 +0200 heinrichsweikamp Added tag v1.5.4 release for changeset e9ca66ce36e5
Wed, 22 Jul 2020 11:55:53 +0200 heinrichsweikamp 1.5.4 release v1.5.4 release
Mon, 29 Jun 2020 16:18:17 +0200 heinrichsweikamp add wiki sub-directory
Sat, 27 Jun 2020 18:40:32 +0200 heinrichsweikamp Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
Tue, 26 May 2020 19:27:07 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
Tue, 26 May 2020 21:13:12 +0200 ideenmodellierer Bugfix header EEPROM layout: FixLayout_Header_LogView
Tue, 26 May 2020 21:13:00 +0200 ideenmodellierer Bugfix right alignment of string: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:46 +0200 ideenmodellierer Small corrections layout Divelog page 1: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:02 +0200 ideenmodellierer Development option only read bottledata: FixLayout_Header_LogView
Tue, 19 May 2020 07:27:18 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
Mon, 18 May 2020 21:51:08 +0200 ideenmodellierer Bugfix calculation of string center position: Improve_Button_Sleep
Wed, 13 May 2020 21:56:35 +0200 ideenmodellierer Code cleanup pressure plausibility check: Improve_Button_Sleep
Wed, 13 May 2020 21:27:30 +0200 ideenmodellierer Bugfix unintended else condition: Improve_Button_Sleep
Tue, 12 May 2020 23:03:50 +0200 ideenmodellierer Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep
Tue, 12 May 2020 23:03:29 +0200 ideenmodellierer Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep
Tue, 12 May 2020 22:54:19 +0200 ideenmodellierer Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep
Tue, 12 May 2020 22:52:05 +0200 ideenmodellierer Changed default values: Improve_Button_Sleep
Tue, 12 May 2020 22:42:52 +0200 ideenmodellierer Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep
Tue, 12 May 2020 22:39:18 +0200 ideenmodellierer Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep
Tue, 28 Apr 2020 15:37:47 +0000 heinrichsweikamp Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
Wed, 22 Apr 2020 13:08:57 +0200 Jan Mulder bugfix: implement battery charge percentage in dive header fix-bat-2
Wed, 15 Apr 2020 07:01:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
Tue, 14 Apr 2020 19:45:34 +0200 ideenmodellierer Removed no longer needed reset profile function: Improve_Logtansfer
Tue, 14 Apr 2020 19:44:19 +0200 ideenmodellierer Moved and deactivated analyse sample buffer switch: Improve_Logtansfer
Tue, 14 Apr 2020 19:29:23 +0200 ideenmodellierer Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer
Tue, 14 Apr 2020 19:27:04 +0200 ideenmodellierer Removed invalidate header function because it is no lonnger needed Improve_Logtansfer
Tue, 14 Apr 2020 19:22:56 +0200 ideenmodellierer Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer
Mon, 13 Apr 2020 16:00:54 +0200 ideenmodellierer Added compile switch to handle additional data during raw header request: Improve_Logtansfer
Sun, 12 Apr 2020 21:02:34 +0200 ideenmodellierer Added function to transfer sample buffer: Improve_Logtansfer
Wed, 08 Apr 2020 16:34:54 +0200 heinrichsweikamp Power-down Bluetooth on COMM exit
Mon, 30 Mar 2020 13:16:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
Sun, 29 Mar 2020 21:55:00 +0200 Ideenmodellierer merged default into minor_improvments minor_improvments
Sun, 29 Mar 2020 21:39:57 +0200 ideenmodellierer Activated reset of sample information within header data at time of sector erasing: minor_improvments
Sat, 28 Mar 2020 21:41:47 +0100 ideenmodellierer Added ppO2 to dummy profile data: minor_improvments
Tue, 24 Mar 2020 22:32:48 +0100 ideenmodellierer Eliminated some minor warnings minor_improvments
Tue, 24 Mar 2020 22:14:16 +0100 ideenmodellierer Transfer a dummy profile in case of missing sample information: minor_improvments
Tue, 24 Mar 2020 22:12:08 +0100 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 22:08:29 +0100 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 21:59:38 +0100 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:59:11 +0100 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:49:52 +0100 ideenmodellierer Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
Tue, 24 Mar 2020 21:48:27 +0100 ideenmodellierer Added new compile switches for variants: minor_improvments
Mon, 23 Mar 2020 21:14:54 +0100 ideenmodellierer Added initialization of bottle sensor data age counter minor_improvments
Mon, 23 Mar 2020 21:13:52 +0100 ideenmodellierer Added compile switch to show voltage parallel to charge status percantage minor_improvments
Mon, 23 Mar 2020 21:10:02 +0100 ideenmodellierer Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
Thu, 05 Mar 2020 22:31:50 +0100 ideenmodellierer Introduced configuration header for variant managment: minor_improvments
Thu, 05 Mar 2020 22:27:55 +0100 ideenmodellierer Removed duplicated definition: minor_improvments
Sat, 29 Feb 2020 22:27:29 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:27:04 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:25:20 +0100 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
Sun, 01 Mar 2020 10:06:45 +0100 heinrichsweikamp fix potential issue with >255 dives in the logbook
Thu, 27 Feb 2020 09:13:25 +0100 heinrichsweikamp Added tag v1.5.3 release for changeset 5b4c78c36b04
Thu, 27 Feb 2020 09:13:08 +0100 heinrichsweikamp 1.5.3 release v1.5.3 release
Mon, 24 Feb 2020 15:17:54 +0100 heinrichsweikamp update the 1.5.3 for tests
Mon, 24 Feb 2020 07:58:37 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
Sun, 23 Feb 2020 21:18:49 +0100 ideenmodellierer Moved power on detection to RTE: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:17:17 +0100 ideenmodellierer Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:13:28 +0100 ideenmodellierer Reduced timeout for common UART communication: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:09:56 +0100 ideenmodellierer Detect startup after power off: Improve_BatteryGasGauge
Tue, 18 Feb 2020 12:41:45 +0100 heinrichsweikamp show battery percent and voltage and surfacemode. That gives additional