Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 456: (0) -240 +240 tip
age author description
2020-03-24 ideenmodellierer Transfer a dummy profile in case of missing sample information: minor_improvments
2020-03-24 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
2020-03-24 ideenmodellierer Reactivated samples for bottle pressure information: minor_improvments
2020-03-24 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24 ideenmodellierer Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24 ideenmodellierer Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
2020-03-24 ideenmodellierer Added new compile switches for variants: minor_improvments
2020-03-23 ideenmodellierer Added initialization of bottle sensor data age counter minor_improvments
2020-03-23 ideenmodellierer Added compile switch to show voltage parallel to charge status percantage minor_improvments
2020-03-23 ideenmodellierer Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
2020-03-05 ideenmodellierer Introduced configuration header for variant managment: minor_improvments
2020-03-05 ideenmodellierer Removed duplicated definition: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-02-29 ideenmodellierer Introduced enum for lower left corner view selection: minor_improvments
2020-03-01 heinrichsweikamp fix potential issue with >255 dives in the logbook
2020-02-27 heinrichsweikamp Added tag v1.5.3 release for changeset 5b4c78c36b04
2020-02-27 heinrichsweikamp 1.5.3 release v1.5.3 release
2020-02-24 heinrichsweikamp update the 1.5.3 for tests
2020-02-24 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
2020-02-23 ideenmodellierer Moved power on detection to RTE: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Reduced timeout for common UART communication: Improve_BatteryGasGauge
2020-02-23 ideenmodellierer Detect startup after power off: Improve_BatteryGasGauge
2020-02-18 heinrichsweikamp show battery percent and voltage and surfacemode. That gives additional
2020-02-18 heinrichsweikamp make a 1.5.3 for tests
2020-02-18 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
2020-02-17 ideenmodellierer Marked possible code improvment for future activities: ImprovmentNVM_2
2020-02-17 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-16 ideenmodellierer Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15 ideenmodellierer Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2
2020-02-10 ideenmodellierer ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2
2020-02-10 ideenmodellierer Moved Timeout handling out of 100ms callback: ImprovmentNVM_2
2020-02-10 ideenmodellierer Enable sequentionel writing of device data: ImprovmentNVM_2
2020-02-10 ideenmodellierer Optimize ef_write_block function: ImprovmentNVM_2
2020-02-10 heinrichsweikamp Merged in janlmulder/ostc4/maintain-2 (pull request #38)
2020-02-07 Jan Mulder Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
2020-01-15 heinrichsweikamp 1.5.2 beta with RTE 2.02 v1.5.2.beta release
2020-01-15 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
2020-01-14 Ideenmodellierer merged default into Improvment_NVM Improment_NVM
2020-01-14 ideenmodellierer Added compile switch for restoring of last known date after power lost: Improment_NVM
2020-01-14 ideenmodellierer Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
2020-01-14 ideenmodellierer Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
2020-01-13 ideenmodellierer Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
2020-01-12 ideenmodellierer Bugfix display compass calibration frozen: Improment_NVM
2020-01-12 ideenmodellierer Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
2020-01-12 ideenmodellierer Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
2020-01-12 ideenmodellierer Bugfix parallel call of external flash functions: Improment_NVM
2020-01-12 ideenmodellierer Bugfix Min max values for device data checks: Improment_NVM
2020-01-12 ideenmodellierer Bugfix Display of Sensor values: Improment_NVM
2020-01-12 ideenmodellierer Bugfix: display of time of minimum voltag: Improment_NVM
2020-01-08 heinrichsweikamp We got one report of false/freezd depth reading when jumping into 2m depth
2020-01-05 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
2019-12-29 Ideenmodellierer merged default into ImproveBluetooth ImproveBluetooth
2019-12-28 ideenmodellierer Added retry through power off/on cycle: ImproveBluetooth
2019-12-21 ideenmodellierer Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
2019-12-02 ideenmodellierer Bugfix: Merge / cleanup problem: ImproveBluetooth
2019-12-01 ideenmodellierer Added missing enum for configuration states ImproveBluetooth
2019-11-26 ideenmodellierer Added function for BlueMod configuration: ImproveBluetooth
2019-11-26 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26 ideenmodellierer Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26 ideenmodellierer Configurate FlowCntrl Pins as noPull ImproveBluetooth
2019-11-26 ideenmodellierer Bugfix negativ ascend bar: ImproveBluetooth
2019-11-26 ideenmodellierer Move Constants and libm to start of firmware ROM block: ImproveBluetooth
2019-12-02 heinrichsweikamp Merged in janlmulder/ostc4/maintain-1 (pull request #35)
2019-12-01 Jan Mulder Fix case for case sensitive OS maintain-1
2019-12-01 Jan Mulder Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
2019-11-24 heinrichsweikamp Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
2019-10-21 ideenmodellierer Added key direction awarness to t3, t5 and t6 views: MotionDetection
2019-10-21 ideenmodellierer Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
2019-10-17 ideenmodellierer Consider number of available t3 views in sector handling: MotionDetection
2019-10-17 ideenmodellierer Combine variables in a structure to improve readability of code MotionDetection
2019-10-10 Ideenmodellierer merge default MotionDetection
2019-10-10 ideenmodellierer Simplified pitch detection state machine: MotionDetection
2019-10-10 ideenmodellierer Minor code cleanup MotionDetection
2019-09-16 ideenmodellierer Added missing customerview selection MotionDetection
2019-09-16 ideenmodellierer Incremented "idle window" for scroll detection MotionDetection
2019-09-16 ideenmodellierer Motion events effect custom view in dive mode only MotionDetection
2019-09-16 ideenmodellierer Added string for Empty/ Debug custom view selection MotionDetection
2019-09-10 ideenmodellierer Use Enum values for initialization and setting check: MotionDetection
2019-09-08 ideenmodellierer Removed some warnings MotionDetection
2019-09-08 ideenmodellierer Add scroll event by pitch angle detection: MotionDetection
2019-08-19 Ideenmodellierer merged default into MotionDetection MotionDetection
2019-08-19 ideenmodellierer Added parameter for number of sectors to be defined MotionDetection
2019-08-13 ideenmodellierer Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
2019-08-13 ideenmodellierer Added a function to count the active custom views. MotionDetection
2019-08-13 ideenmodellierer Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
2019-07-20 Ideenmodellierer Merge default MotionDetection
2019-06-17 ideenmodellierer Fix misalignment of do while loop MotionDetection
2019-06-17 ideenmodellierer Bugfix: selection of current view not working MotionDetection
2019-06-17 ideenmodellierer Update call of motion detection function MotionDetection
2019-06-17 ideenmodellierer Reworked detection function MotionDetection
2019-06-11 Ideenmodellierer Parameter update MotionDetection
2019-06-11 Ideenmodellierer Pass action to customer vie update function. MotionDetection
2019-05-24 ideenmodellierer Added trigger of middle button action in case of a detected shake MotionDetection
2019-05-24 ideenmodellierer Added new files for motion detection (shaking) detection MotionDetection
2019-11-24 heinrichsweikamp Add Support for new end-2019 hardware:
2019-11-23 heinrichsweikamp Add Support for new end-2019 hardware:
2019-11-23 heinrichsweikamp Add Support for new end-2019 hardware:
2019-10-09 heinrichsweikamp Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
2019-10-09 heinrichsweikamp Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
2019-10-08 Jan Mulder Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
2019-10-08 Jan Mulder Fix merge problem fix-merge-mess
2019-10-06 heinrichsweikamp Merge
2019-10-06 heinrichsweikamp Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
2019-10-03 ideenmodellierer Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
2019-10-03 ideenmodellierer Minor changes to debug view FlightMode_Improvment
2019-10-03 ideenmodellierer Added option to manually leave dive mode to system menu FlightMode_Improvment
2019-10-03 ideenmodellierer Added function to support manuel exit of dive mode FlightMode_Improvment
2019-10-03 ideenmodellierer Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
2019-10-01 ideenmodellierer Removed not used wireless menu items FlightMode_Improvment
2019-10-01 ideenmodellierer Added compile switch to enable debug view option in system menu FlightMode_Improvment
2019-10-01 ideenmodellierer Removed averaging of pressure and temperatur values FlightMode_Improvment
2019-10-06 heinrichsweikamp change max. allowed surface pressure to 1030hPa (As in the small OSTC)
2019-08-19 heinrichsweikamp Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
2019-08-17 ideenmodellierer Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment
2019-08-17 ideenmodellierer Added function to avoid divemode activation during Landing: PressureMeasure_Improvment
2019-08-17 ideenmodellierer Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment
2019-08-17 ideenmodellierer Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment
2019-08-13 ideenmodellierer Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment
2019-08-04 heinrichsweikamp building a 1.5 v1.5.0 release
2019-07-20 heinrichsweikamp add update files for testing purposes
2019-07-18 heinrichsweikamp Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
2019-07-17 ideenmodellierer Added plausibility check for pressure values I2C_Improvment
2019-07-17 ideenmodellierer Added check of configuration. I2C_Improvment
2019-07-17 ideenmodellierer Improved startup robustness I2C_Improvment
2019-07-17 ideenmodellierer Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_Improvment
2019-07-17 ideenmodellierer Deactivated internal pullups and I2C interrupt callback I2C_Improvment
2019-07-01 heinrichsweikamp Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
2019-06-20 Jan Mulder bugfix: implement battery at end in dive header fix-batt-1
2019-06-30 heinrichsweikamp increase RTE to 1.9 and Firmware to 1.4.9 beta
2019-06-30 heinrichsweikamp Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
2019-06-30 ideenmodellierer Added start of frame detection for HUD data O2_SensorSync
2019-06-30 ideenmodellierer Moved indication variable for received HUD data to tCCR file. O2_SensorSync
2019-06-19 heinrichsweikamp Merged in janlmulder/ostc4/fix-version (pull request #27)
2019-06-19 Jan Mulder bugfix: correct packed main version number in dive header fix-version
2019-06-19 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
2019-06-17 ideenmodellierer Resolved warning Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdate
2019-06-17 ideenmodellierer Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdate
2019-06-01 heinrichsweikamp Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
2019-05-31 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
2019-05-29 Jan Mulder bugfix: make stopwatch and divetime run in sync cleanup-4
2019-05-26 Jan Mulder Make dive mode detection more advanced cleanup-4
2019-05-24 Jan Mulder cleanup: factor out SHelper typedef (and more) cleanup-4
2019-05-24 Jan Mulder cleanup: introduce function setAvgDepth cleanup-4
2019-05-22 Jan Mulder cleanup: factor out unused stopwatch code cleanup-4
2019-05-22 Jan Mulder bugfix, cleanup: do not clip depth to 0 cleanup-4
2019-05-21 Jan Mulder bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4
2019-05-20 Jan Mulder bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4
2019-05-20 Jan Mulder bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4
2019-05-20 Jan Mulder bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4
2019-05-20 Jan Mulder cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4
2019-05-17 Jan Mulder cleanup: remove commented/unused code, make static cleanup-4
2019-05-17 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
2019-05-16 Jan Mulder Bugfix: fix drawing of CCR bailout profile cleanup-3
2019-05-16 Jan Mulder cleanup: remove unused code, make static, remove commented code cleanup-3
2019-05-16 Jan Mulder Possible bugfix: do not use bitwise and (&) cleanup-3
2019-05-13 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
2019-05-12 Jan Mulder Added tag v1.4.8 release for changeset ba9d99a2e310 div-fixes-6
2019-05-02 Jan Mulder bugfix, consistency: show deco, NDL after 1 minute div-fixes-6
2019-05-02 Jan Mulder translate: nullzeit -> ndl div-fixes-6
2019-05-02 Jan Mulder Deco Models: limit NDL to 240 minutes div-fixes-6
2019-05-02 Jan Mulder VPM, cleanup: 1st round div-fixes-6
2019-04-29 Jan Mulder cleanup: remove unused code div-fixes-6
2019-04-29 Jan Mulder cleanup: no useless checks for simulator state div-fixes-6
2019-05-06 heinrichsweikamp Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 release
2019-05-06 heinrichsweikamp Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
2019-05-05 heinrichsweikamp add update files for testing purposes
2019-05-02 heinrichsweikamp Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
2019-05-02 Jan Mulder Bugfix: write NDL in logbook correctly ndl-in-logbook
2019-05-01 heinrichsweikamp translate some comments into english
2019-05-01 heinrichsweikamp Fix typos (There are still many...)
2019-04-29 heinrichsweikamp Make RTE show as 1.8.0 beta, add update files for testing purposes
2019-04-28 heinrichsweikamp add update files for testing purposes
2019-04-28 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
2019-04-28 ideenmodellierer Rework SPI error handling. IPC_Sync_Improvment_3
2019-04-28 ideenmodellierer Rework pressure/ temperature data aquisition IPC_Sync_Improvment_3
2019-04-28 ideenmodellierer Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_3
2019-04-28 heinrichsweikamp add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
2019-04-28 heinrichsweikamp Merged in janlmulder/ostc4/write-from-sim (pull request #20)
2019-04-27 Jan Mulder cleanup: simplify stateUsed usage write-from-sim
2019-04-27 Jan Mulder cleanup: also write gas and setpoint changes in simulator mode write-from-sim
2019-04-24 Jan Mulder feature, debug: make simulator write a logbook entry write-from-sim
2019-04-23 Jan Mulder cleanup: do not pass large struct by value write-from-sim
2019-04-23 Jan Mulder cleanup: make things static where possible. write-from-sim
2019-04-26 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
2019-04-14 ideenmodellierer Added batch to copy bins from release folder IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2
2019-04-14 ideenmodellierer Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2
2019-04-23 heinrichsweikamp Merged in janlmulder/ostc4/bm-3 (pull request #19)
2019-04-23 Jan Mulder Bugfix: do not reset saturation on surfacing bm-3
2019-04-23 Jan Mulder Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3
2019-04-15 Jan Mulder feature: allow new saturation to be set in lower left corner bm-3
2019-04-12 Jan Mulder Buehlmann: factor out another global gDecotable bm-3
2019-04-12 Jan Mulder Buehlmann: factor out gNDL and gTTS bm-3
2019-04-12 Jan Mulder Buehlmann: trivial performance improvement (NDL) bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, factor out pBuDiveSettings bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3
2019-04-12 Jan Mulder Buehlmann: cleanup, whitespace, static bm-3
2019-04-13 heinrichsweikamp Minor: Typo fixed in bootloader screen V1.4.7 release
2019-04-12 heinrichsweikamp Merged in janlmulder/ostc4/bm-2 (pull request #17)
2019-04-11 Jan Mulder Buelmann: new implementation for ceiling bm-2
2019-04-11 heinrichsweikamp Merged in janlmulder/ostc4/bm-1 (pull request #16)
2019-04-10 Jan Mulder Fix stupid commit error bm-1
2019-04-09 Jan Mulder feature: Relative GF to Saturation renames bm-1
2019-04-09 Jan Mulder feature: replace Relative GF by saturation, computational only bm-1
2019-04-10 heinrichsweikamp add update files for testing purposes
2019-04-09 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
2019-04-08 Jan Mulder debug: add SPI error counter to compass calibration div-fixes-5
2019-04-08 Jan Mulder Comply to datasheet when resetting battery gauge registers div-fixes-5
2019-04-08 Jan Mulder cleanup: factor out I2C1_Status() and cleanup type div-fixes-5
2019-04-08 Jan Mulder Improvement SPI stability/recoverability div-fixes-5
2019-04-08 Jan Mulder cleanup: factor out dataSendToSlaveStopEval div-fixes-5
2019-04-08 Jan Mulder cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5
2019-04-06 Jan Mulder Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5
2019-04-06 heinrichsweikamp Minor: translating some comments and variable names into english, some cleanup in tComm.c
2019-04-06 heinrichsweikamp add update files for testing purposes
2019-04-06 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
2019-04-05 Jan Mulder cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1
2019-04-03 Jan Mulder Bugfix: make date/time setting work over reboots div-fixes-4-1
2019-04-03 Jan Mulder cleanup: do not re-implement a standard function div-fixes-4-1
2019-04-03 Jan Mulder cleanup: make return void when never used div-fixes-4-1
2019-04-02 Jan Mulder cleanup: fix recent extra compiler warnings div-fixes-4-1
2019-04-02 Jan Mulder Bugfix: set battery percentage correctly after RTE update div-fixes-4-1
2019-04-02 heinrichsweikamp add update files for testing purposes
2019-04-01 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
2019-04-01 Jan Mulder cleanup: random set of cleanups div-fixes-3
2019-03-31 Jan Mulder Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3
2019-03-31 Jan Mulder Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3
2019-03-29 Jan Mulder Bugfix: correct presentation error in tissues custom view div-fixes-3
2019-04-01 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
2019-03-31 ideenmodellierer Added schedule point for functions executed once in a second Improve_IPC_Sync
2019-03-31 ideenmodellierer Resolved some minor warnings Improve_IPC_Sync
2019-03-31 ideenmodellierer Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_Sync
2019-03-31 ideenmodellierer Moved display refresh and button action function from tim callback to main loop Improve_IPC_Sync
less more | rev 456: (0) -240 +240 tip