log

age author description
Thu, 11 May 2023 12:13:03 +0200 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:35:40 +0100 Ideenmodellierer Bugfix data synchronization after RTE start:
Sat, 07 Jan 2023 18:11:52 +0100 Ideenmodellierer Update CO2 sensor implementation:
Thu, 05 Jan 2023 18:30:06 +0100 Ideenmodellierer Development feature: external pressure sensor
Thu, 05 Jan 2023 18:27:04 +0100 Ideenmodellierer DigO2 added raw data request:
Thu, 05 Jan 2023 18:25:47 +0100 Ideenmodellierer Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:22:21 +0100 Ideenmodellierer DigO2 added raw data request:
Tue, 03 Jan 2023 19:47:12 +0100 Ideenmodellierer Bugfix set date (year):
Sun, 27 Nov 2022 15:18:00 +0100 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 20 Nov 2022 20:49:41 +0100 Ideenmodellierer Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:46:10 +0100 Ideenmodellierer Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:43:04 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:33 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:42:08 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:37:44 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:36:34 +0100 Ideenmodellierer Bugfix PSCR menu button label:
Tue, 08 Nov 2022 22:16:56 +0100 Ideenmodellierer Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 21:16:17 +0100 Ideenmodellierer Extension scrubber time:
Tue, 08 Nov 2022 21:13:14 +0100 Ideenmodellierer Bugfix compass bearing:
Thu, 03 Nov 2022 20:44:51 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:37:06 +0100 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
Tue, 01 Nov 2022 09:55:45 +0100 Ideenmodellierer Bugfix release frame:
Fri, 28 Oct 2022 20:49:21 +0200 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:32:24 +0200 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:29:37 +0200 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 19:39:20 +0200 Ideenmodellierer Bugfix display of deactivated sensors:
Tue, 18 Oct 2022 21:21:32 +0200 Ideenmodellierer Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 20:56:19 +0200 Ideenmodellierer Cleanup warnings:
Sun, 25 Sep 2022 21:13:45 +0200 Ideenmodellierer Bugfix Empty menu:
Sun, 25 Sep 2022 21:09:18 +0200 Ideenmodellierer Improvment key event detection:
Fri, 19 Aug 2022 11:30:24 +0200 heinrichsweikamp Merge
Fri, 19 Aug 2022 11:27:44 +0200 heinrichsweikamp 1.6.0 release Betatest
Sat, 06 Aug 2022 11:10:56 +0200 heinrichsweikamp Update current build for testing Betatest
Fri, 05 Aug 2022 16:04:52 +0200 Ideenmodellierer Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 15:27:01 +0200 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:26:28 +0200 Ideenmodellierer Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:22:26 +0200 Ideenmodellierer Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:15:01 +0200 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:13:29 +0200 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:10:10 +0200 Ideenmodellierer Increased version numbers: Betatest
Fri, 05 Aug 2022 14:56:17 +0200 Ideenmodellierer Bugfix Battery charge complete event: Betatest
Wed, 03 Aug 2022 18:19:03 +0200 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
Thu, 02 Jun 2022 20:24:59 +0200 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
Mon, 16 May 2022 20:50:26 +0200 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 25 Apr 2022 21:15:01 +0200 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:10:10 +0200 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:07:28 +0200 Ideenmodellierer Bugfix visualization better setpoint: Betatest
Fri, 22 Apr 2022 18:24:43 +0200 Jan Mulder cleanup: Use correct "per" symbol Betatest
Thu, 21 Apr 2022 21:02:50 +0200 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
Wed, 20 Apr 2022 20:25:04 +0200 Jan Mulder Move include file to common to ... Betatest
Mon, 22 Nov 2021 19:39:11 +0100 Jan Mulder Allow longer scrubber time Betatest
Wed, 30 Mar 2022 18:07:21 +0200 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:01:29 +0200 heinrichsweikamp Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:00:21 +0200 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
Sat, 12 Mar 2022 23:01:11 +0100 Ideenmodellierer Added Charging view: Betatest
Sat, 12 Mar 2022 22:58:22 +0100 Ideenmodellierer Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:54:26 +0100 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:49:09 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100 Ideenmodellierer Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:42:56 +0100 Ideenmodellierer Increased version number Betatest
Sat, 12 Mar 2022 14:57:54 +0100 heinrichsweikamp increase version numbers for upcomming release Betatest
Fri, 24 Dec 2021 13:40:47 +0100 heinrichsweikamp update test build Betatest
Tue, 21 Dec 2021 19:36:41 +0100 Ideenmodellierer Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:32:29 +0100 Ideenmodellierer Revert Setbluetooh name changes Betatest
Tue, 14 Dec 2021 15:36:10 +0100 heinrichs weikamp PSCR Mode Betatest
Mon, 01 Nov 2021 12:39:34 +0100 heinrichs weikamp Undo Rev. 660
Sun, 08 Aug 2021 09:36:23 +0200 heinrichsweikamp Add option to reset bluetooth name
Wed, 28 Apr 2021 09:47:25 +0200 heinrichs weikamp Update build file for testing
Tue, 27 Apr 2021 21:29:26 +0200 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
Mon, 26 Apr 2021 15:03:04 +0200 heinrichs weikamp Update release date
Sun, 25 Apr 2021 20:47:01 +0200 Ideenmodellierer Added visualization of scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200 Ideenmodellierer Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:41:19 +0200 Ideenmodellierer Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:36:18 +0200 Ideenmodellierer Bugfix temperature display Logpage2:
Mon, 19 Apr 2021 20:34:53 +0200 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:20:38 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200 Ideenmodellierer Automatik setpoint change:
Mon, 19 Apr 2021 20:16:24 +0200 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:14:20 +0200 Ideenmodellierer Motion detection: Enable focus after focus calibration: