19 months ago |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
19 months ago |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
19 months ago |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
19 months ago |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
20 months ago |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
20 months ago |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
20 months ago |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
20 months ago |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
20 months ago |
heinrichsweikamp |
1.6.2 release
|
20 months ago |
heinrichsweikamp |
Update build for testing
|
20 months ago |
heinrichsweikamp |
change button default responsiveness to 100
|
20 months ago |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
20 months ago |
heinrichsweikamp |
Update build for testing
|
20 months ago |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
20 months ago |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
21 months ago |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
21 months ago |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
21 months ago |
heinrichsweikamp |
Some compass improvements from mikeller
|
21 months ago |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
21 months ago |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
21 months ago |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
21 months ago |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
21 months ago |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
21 months ago |
Ideenmodellierer |
Updated outdated comment
|
21 months ago |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
21 months ago |
Ideenmodellierer |
resolv merge
|
21 months ago |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
21 months ago |
Ideenmodellierer |
Added enum for Co2 display
|
21 months ago |
Ideenmodellierer |
Added display of co2 ppm values:
|
21 months ago |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
22 months ago |
Ideenmodellierer |
Code cleanup sensors under development:
|
22 months ago |
Ideenmodellierer |
Update Sentinel protocol:
|
22 months ago |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
22 months ago |
Ideenmodellierer |
Enable start dive in Big font display:
|
22 months ago |
Ideenmodellierer |
Update Sentinel protocol:
|
22 months ago |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
22 months ago |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
22 months ago |
Ideenmodellierer |
Enable start dive in Big font display:
|
22 months ago |
Ideenmodellierer |
Added data init function for external interface:
|
21 months ago |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
21 months ago |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
22 months ago |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
23 months ago |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
23 months ago |
Ideenmodellierer |
Optical sensor as default:
|
23 months ago |
Ideenmodellierer |
Fix compiler switch:
|
23 months ago |
Ideenmodellierer |
Improvment sensor Autodetection:
|
23 months ago |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
23 months ago |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
23 months ago |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
23 months ago |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
23 months ago |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
23 months ago |
Ideenmodellierer |
Update CO2 sensor implementation:
|
23 months ago |
Ideenmodellierer |
Development feature: external pressure sensor
|
23 months ago |
Ideenmodellierer |
DigO2 added raw data request:
|
23 months ago |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
23 months ago |
Ideenmodellierer |
DigO2 added raw data request:
|
23 months ago |
Ideenmodellierer |
Bugfix set date (year):
|
2022-11-27 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
2022-11-20 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
2022-11-20 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
2022-11-20 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
2022-11-08 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
2022-11-08 |
Ideenmodellierer |
Extension scrubber time:
|
2022-11-08 |
Ideenmodellierer |
Bugfix compass bearing:
|
2022-11-03 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
2022-11-03 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
2022-11-03 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
2022-11-01 |
Ideenmodellierer |
Bugfix release frame:
|
2022-10-28 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
2022-10-28 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
2022-10-28 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
2022-10-28 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
2022-10-18 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
2022-10-18 |
Ideenmodellierer |
Cleanup warnings:
|
2022-09-25 |
Ideenmodellierer |
Bugfix Empty menu:
|
2022-09-25 |
Ideenmodellierer |
Improvment key event detection:
|
2022-08-19 |
heinrichsweikamp |
Merge
|
2022-08-19 |
heinrichsweikamp |
1.6.0 release
Betatest
|
2022-08-06 |
heinrichsweikamp |
Update current build for testing
Betatest
|
2022-08-05 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
2022-08-05 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
2022-08-05 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
2022-08-03 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
2022-06-02 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
2022-05-16 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
2022-04-25 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
2022-04-25 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
2022-04-25 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
2022-04-22 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
2022-04-21 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
2022-04-20 |
Jan Mulder |
Move include file to common to ...
Betatest
|
2021-11-22 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
2022-03-30 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
2022-03-30 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
2022-03-30 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
2022-03-12 |
Ideenmodellierer |
Added Charging view:
Betatest
|
2022-03-12 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
2022-03-12 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
2022-03-12 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
2022-03-12 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
2022-03-12 |
Ideenmodellierer |
Increased version number
Betatest
|
2022-03-12 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
2021-12-24 |
heinrichsweikamp |
update test build
Betatest
|
2021-12-21 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
2021-12-21 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
2021-12-14 |
heinrichs weikamp |
PSCR Mode
Betatest
|
2021-11-01 |
heinrichs weikamp |
Undo Rev. 660
|
2021-08-08 |
heinrichsweikamp |
Add option to reset bluetooth name
|
2021-04-28 |
heinrichs weikamp |
Update build file for testing
|
2021-04-27 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
2021-04-26 |
heinrichs weikamp |
Update release date
|
2021-04-25 |
Ideenmodellierer |
Added visualization of scrubber time:
|
2021-04-25 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
2021-04-25 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
2021-04-25 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
2021-04-19 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
2021-04-19 |
Ideenmodellierer |
Automatik setpoint change:
|
2021-04-19 |
Ideenmodellierer |
Automatik setpoint change:
|
2021-04-19 |
Ideenmodellierer |
Bugfix consider checkbox in calculation of right aligned and centered position:
|
2021-04-19 |
Ideenmodellierer |
Motion detection: Enable focus after focus calibration:
|
2021-04-13 |
Ideenmodellierer |
Integrated selection of bailout in the diluent selection page:
|
2021-04-13 |
Ideenmodellierer |
Remove battery charge counter from information menu:
|
2021-04-13 |
Ideenmodellierer |
Small changes in charger state handling:
|
2021-03-30 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
2021-03-24 |
Ideenmodellierer |
Reimplemented charger status generation (deactivated):
|
2021-03-24 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
2021-03-11 |
Ideenmodellierer |
Development Bugfix Deco bars not shown after last deco stop passed:
|
2021-03-11 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
2021-02-25 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
2021-02-24 |
Ideenmodellierer |
Added last measured PPO2 value to sensor selection dialog:
|
2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
2021-02-24 |
Ideenmodellierer |
Debounce fallback warning:
|
2021-02-24 |
Ideenmodellierer |
Enable sensor check for Analog PPO2 mode:
|
2021-02-23 |
Ideenmodellierer |
Added menu structure to allow ppo2 modification in simulator mode:
|
2021-02-23 |
Ideenmodellierer |
Warnings:
|
2021-02-23 |
Ideenmodellierer |
Warnings:
|
2021-02-23 |
Ideenmodellierer |
Warnings:
|
2021-02-23 |
Ideenmodellierer |
Added functionality to add ppo2 mV offset:
|
2021-02-12 |
Ideenmodellierer |
Added compile switch for T3_PROFILE menu operation option
|
2021-02-12 |
Ideenmodellierer |
Improve in / out of focus transitions:
|
2021-02-12 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
2021-02-08 |
Ideenmodellierer |
Switch Sector / Scroll detection to vector implementation:
|
2021-02-07 |
Ideenmodellierer |
Development bugfix: Marker in standard t3 view drawn in wrong direction
|
2021-02-07 |
Ideenmodellierer |
Improvment frame Handling:
|
2021-02-03 |
Ideenmodellierer |
Adjustments for flipped display view:
|
2021-02-03 |
Ideenmodellierer |
Use roll and pitch agles in 0-360 format:
|
2021-01-27 |
Ideenmodellierer |
Added minilog functions to allow marker synchronisation:
|
2021-01-27 |
Ideenmodellierer |
Added t3 quick menu for marker synchronisation:
|
2021-01-27 |
Ideenmodellierer |
Development bugfix: focus state not remembered:
|
2021-01-27 |
Ideenmodellierer |
Development bugfix: Low battery warning was interpretated as marker:
|
2021-01-27 |
Ideenmodellierer |
Development bugfix: show replay symbol only for the selected dive:
|
2021-01-27 |
Ideenmodellierer |
Moved non critical functions from timer interrupt to main loop:
|
2021-01-20 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
2021-01-15 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
2021-01-15 |
Ideenmodellierer |
Bugfix inverted whitspace:
|
2021-01-14 |
Ideenmodellierer |
Suspend MotionDetection events while diver is operationg the OSTC:
|
2021-01-14 |
Ideenmodellierer |
Added access to logbook marker data:
|
2021-01-14 |
Ideenmodellierer |
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
|
2021-02-05 |
heinrichsweikamp |
Update RTE required value for release
|
2021-02-05 |
heinrichsweikamp |
Added tag v1.5.6 release for changeset 06ec1da5e105
|
2021-02-05 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
2021-01-07 |
heinrichsweikamp |
change O2_CALIB_FRACTION_O2 to 0.98
|
2021-01-06 |
Ideenmodellierer |
Merged menu items of viewport and motion control:
|
2021-01-06 |
Ideenmodellierer |
T3 profile view: Added visualization of deco data
|
2021-01-05 |
Ideenmodellierer |
Added replay data scaling in case life data is longer than replay block
|
2021-01-04 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
2021-01-04 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
2021-01-04 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
2021-01-04 |
Ideenmodellierer |
New replay block for T3 profile:
|
2021-01-04 |
Ideenmodellierer |
MotionControl-Sector: Map sectors during switch T7 <=> T3:
|
2021-01-04 |
Ideenmodellierer |
Added functionality to select a dive to be shown in the T3 profile view:
|
2021-01-04 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
2021-01-04 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
2021-01-04 |
Ideenmodellierer |
Added PrintGraph option to skip invalid data entries:
|
2021-01-03 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
2021-01-06 |
heinrichsweikamp |
Minor: Comment translation into English
|
2020-12-22 |
Ideenmodellierer |
Align VPM tag in log list to be at same position as GF tag:
|
2020-12-17 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
2020-12-17 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
2020-12-16 |
heinrichsweikamp |
update ostc4pack sample files
|
2020-12-13 |
Ideenmodellierer |
Motion control: Jump back to primary view if focus is lost:
|
2020-12-13 |
Ideenmodellierer |
Reduced view angle and number of vusiualized custom views in setor mode:
|
2020-12-12 |
Ideenmodellierer |
Added option for 100% o2 calibration:
|
2020-12-12 |
Ideenmodellierer |
Solved minor warnings
|
2020-12-12 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
2020-12-12 |
Ideenmodellierer |
Added ex Interface measurement restart in case of i2c disturbance:
|
2020-12-12 |
Ideenmodellierer |
Bugfix bad resolution of compass LSM303AGR:
|
2020-12-03 |
heinrichsweikamp |
Minor: Functional inert cleanup of some unused variables
|
2020-11-29 |
Ideenmodellierer |
Rework pitch detection:
|
2020-11-29 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
2020-11-29 |
Ideenmodellierer |
Return to o2 values:
|
2020-11-29 |
Ideenmodellierer |
Change style of viewport calibration menu:
|
2020-11-25 |
Ideenmodellierer |
Improved focus detection:
|
2020-11-25 |
Ideenmodellierer |
Update String "Blickwinkel":
|
2020-11-25 |
Ideenmodellierer |
Added debug view to viewport calibration:
|
2020-11-25 |
Ideenmodellierer |
Reactivate compass parameter stored in NVM:
|
2020-11-30 |
Ideenmodellierer |
Try to reduce legth of log entry string:
|
2020-11-30 |
Ideenmodellierer |
Added new section "lower.font":
|
2020-11-29 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
2020-11-24 |
izzni |
-Add 12HR Time Support
|
2020-11-21 |
heinrichsweikamp |
add current build
|
2020-11-15 |
Ideenmodellierer |
Bugfix center / right alignment if dualfont is used:
|
2020-11-15 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
2020-11-15 |
Ideenmodellierer |
Refine o2 sensor diagnostic functions:
|
2020-11-15 |
Ideenmodellierer |
Added ADC sensor interface to O2 sensore menu structure:
|
2020-11-15 |
Ideenmodellierer |
Solved minor warnings
|
2020-11-15 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
2020-11-15 |
Ideenmodellierer |
Check if HW evaluation was performed:
|
2020-11-12 |
Ideenmodellierer |
Changed operation mode of RecoverSampleIndex:
|
2020-11-12 |
Ideenmodellierer |
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
|
2020-11-12 |
Ideenmodellierer |
Switch source of o2 sensor data depending on availability of external ADC:
|
2020-11-12 |
Ideenmodellierer |
Added HW_Info to Discovery <=> RTE data exchange:
|
2020-11-12 |
Ideenmodellierer |
Added external ADC interface functionality (MCP3424):
|
2020-11-08 |
Ideenmodellierer |
Added color indicator for focus state:
|
2020-11-08 |
Ideenmodellierer |
Added menu structure to acces viewport calibration:
|
2020-11-08 |
Ideenmodellierer |
Added viewport functionality:
|
2020-11-08 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
2020-11-08 |
Ideenmodellierer |
Only execute motion detection functions if features is enabled:
|
2020-11-08 |
Ideenmodellierer |
Update roll and pitch value in simulation mode:
|
2020-11-02 |
Ideenmodellierer |
Added viewport calibration to dive menu:
|
2020-11-02 |
Ideenmodellierer |
Added new settings for Viewport:
|
2020-11-03 |
heinrichsweikamp |
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
|
2020-11-02 |
heinrichsweikamp |
add current build
|
2020-10-11 |
Ideenmodellierer |
Shortend t3 view names:
|
2020-10-10 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
2020-10-10 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
2020-10-10 |
Ideenmodellierer |
Bugfix return from submenu in t3 view:
|
2020-10-10 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
2020-10-10 |
Ideenmodellierer |
BugFix firmware downgrade to version with less settings:
|
2020-10-07 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
2020-10-07 |
Ideenmodellierer |
Changed visualization of Depth / temperatur / debugview entry
|
2020-10-07 |
Ideenmodellierer |
Increased max value for surface pressure:
|
2020-10-04 |
heinrichsweikamp |
Added tag 1.5.5 release for changeset 02e7e11fdbe8
|
2020-09-25 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
2020-09-16 |
heinrichsweikamp |
add current build
|
2020-09-15 |
Ideenmodellierer |
Bugfix custom view selection dialog:
|
2020-09-15 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
2020-09-15 |
Ideenmodellierer |
Added skip condition in custom view selection:
|
2020-09-13 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
2020-09-13 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
2020-09-13 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
2020-09-13 |
Ideenmodellierer |
Change color ID used in strings for light grey:
|
2020-09-13 |
Ideenmodellierer |
Minor: Removed duplicated definition of number of available gases
|
2020-09-10 |
Ideenmodellierer |
Changed string for data view selections:
|
2020-09-10 |
Ideenmodellierer |
Added compile switch for motion control:
|
2020-09-10 |
Ideenmodellierer |
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
|
2020-09-08 |
Ideenmodellierer |
Moved custom view menu to new tab:
|
2020-09-06 |
Ideenmodellierer |
Reset Safety Stop display in case of a new descend:
|
2020-09-06 |
Ideenmodellierer |
Added T3_gaslist:
|
2020-09-06 |
Ideenmodellierer |
Added color coding for cv gas list:
|
2020-09-06 |
Ideenmodellierer |
Added quick menu function to big font view:
|
2020-09-06 |
Ideenmodellierer |
Added missing display of button labels in refresh function:
|
2020-09-16 |
heinrichsweikamp |
Properly send compass 3 into sleepmode (end-2019 hardware)
|
2020-08-31 |
heinrichsweikamp |
Merge
|
2020-08-30 |
Ideenmodellierer |
Added new strings for the selection of T3 custom views
|
2020-08-30 |
Ideenmodellierer |
Minor adaptions in page layout:
|
2020-08-30 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
2020-08-30 |
Ideenmodellierer |
Show page number in small letters if more than 8 tabs are active
|
2020-08-30 |
Ideenmodellierer |
Reimplementation of tMenuEdit_select:
|
2020-08-30 |
Ideenmodellierer |
Added new menu tab into call structure
|
2020-08-30 |
Ideenmodellierer |
Added new top level menu for customization of views
|
2020-08-30 |
Ideenmodellierer |
Removed second big font profile
|
2020-08-24 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
2020-08-24 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
2020-08-24 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
2020-08-24 |
Ideenmodellierer |
Added compile switch to enable / disable new BigFont layout
|
2020-08-24 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
2020-08-24 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
2020-08-24 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
2020-08-24 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
2020-08-24 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
2020-08-20 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
2020-08-10 |
heinrichsweikamp |
Added tag v1.5.4 release for changeset e9ca66ce36e5
|
2020-07-22 |
heinrichsweikamp |
1.5.4 release
v1.5.4 release
|
2020-06-29 |
heinrichsweikamp |
add wiki sub-directory
|
2020-06-27 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
2020-05-26 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
|
2020-05-26 |
ideenmodellierer |
Bugfix header EEPROM layout:
FixLayout_Header_LogView
|
2020-05-26 |
ideenmodellierer |
Bugfix right alignment of string:
FixLayout_Header_LogView
|
2020-05-26 |
ideenmodellierer |
Small corrections layout Divelog page 1:
FixLayout_Header_LogView
|
2020-05-26 |
ideenmodellierer |
Development option only read bottledata:
FixLayout_Header_LogView
|
2020-05-19 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
|
2020-05-18 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
2020-05-13 |
ideenmodellierer |
Code cleanup pressure plausibility check:
Improve_Button_Sleep
|
2020-05-13 |
ideenmodellierer |
Bugfix unintended else condition:
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Development option only: Show Pressure update for a short time in the custom field (as warning)
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Balance value of button responsitivness were not considered during firmware startup:
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Changed default values:
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Added error detection for reading of ADC values in sleep mode:
Improve_Button_Sleep
|
2020-05-12 |
ideenmodellierer |
Do not signal power on reset in case of a "warm" reset:
Improve_Button_Sleep
|
2020-04-28 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
|
2020-04-22 |
Jan Mulder |
bugfix: implement battery charge percentage in dive header
fix-bat-2
|
2020-04-15 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
|
2020-04-14 |
ideenmodellierer |
Removed no longer needed reset profile function:
Improve_Logtansfer
|
2020-04-14 |
ideenmodellierer |
Moved and deactivated analyse sample buffer switch:
Improve_Logtansfer
|
2020-04-14 |
ideenmodellierer |
Cmd Get profile: transmit dummy profile if necessary
Improve_Logtansfer
|
2020-04-14 |
ideenmodellierer |
Removed invalidate header function because it is no lonnger needed
Improve_Logtansfer
|
2020-04-14 |
ideenmodellierer |
Compare profile length from header and sample data to identify valid profiles
Improve_Logtansfer
|
2020-04-13 |
ideenmodellierer |
Added compile switch to handle additional data during raw header request:
Improve_Logtansfer
|
2020-04-12 |
ideenmodellierer |
Added function to transfer sample buffer:
Improve_Logtansfer
|
2020-04-08 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
2020-03-30 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
|
2020-03-29 |
Ideenmodellierer |
merged default into minor_improvments
minor_improvments
|
2020-03-29 |
ideenmodellierer |
Activated reset of sample information within header data at time of sector erasing:
minor_improvments
|
2020-03-28 |
ideenmodellierer |
Added ppO2 to dummy profile data:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Transfer a dummy profile in case of missing sample information:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Allocate received bar value to active gas (was static allocated to gas[1])
minor_improvments
|
2020-03-24 |
ideenmodellierer |
Added new compile switches for variants:
minor_improvments
|
2020-03-23 |
ideenmodellierer |
Added initialization of bottle sensor data age counter
minor_improvments
|
2020-03-23 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
2020-03-23 |
ideenmodellierer |
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
minor_improvments
|
2020-03-05 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
2020-03-05 |
ideenmodellierer |
Removed duplicated definition:
minor_improvments
|
2020-02-29 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
2020-02-29 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
2020-02-29 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
2020-03-01 |
heinrichsweikamp |
fix potential issue with >255 dives in the logbook
|
2020-02-27 |
heinrichsweikamp |
Added tag v1.5.3 release for changeset 5b4c78c36b04
|
2020-02-27 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
2020-02-24 |
heinrichsweikamp |
update the 1.5.3 for tests
|
2020-02-24 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
|
2020-02-23 |
ideenmodellierer |
Moved power on detection to RTE:
Improve_BatteryGasGauge
|
2020-02-23 |
ideenmodellierer |
Bugfix display battery voltage in maintainance menu:
Improve_BatteryGasGauge
|
2020-02-23 |
ideenmodellierer |
Reduced timeout for common UART communication:
Improve_BatteryGasGauge
|
2020-02-23 |
ideenmodellierer |
Detect startup after power off:
Improve_BatteryGasGauge
|
2020-02-18 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
2020-02-18 |
heinrichsweikamp |
make a 1.5.3 for tests
|
2020-02-18 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
|
2020-02-17 |
ideenmodellierer |
Marked possible code improvment for future activities:
ImprovmentNVM_2
|
2020-02-17 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
2020-02-16 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
2020-02-15 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
2020-02-15 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
2020-02-15 |
ideenmodellierer |
Added (optional) menu item to analyse log sample buffer:
ImprovmentNVM_2
|
2020-02-10 |
ideenmodellierer |
ext_Flash_write_sample erase sector optimization:
ImprovmentNVM_2
|
2020-02-10 |
ideenmodellierer |
Moved Timeout handling out of 100ms callback:
ImprovmentNVM_2
|
2020-02-10 |
ideenmodellierer |
Enable sequentionel writing of device data:
ImprovmentNVM_2
|
2020-02-10 |
ideenmodellierer |
Optimize ef_write_block function:
ImprovmentNVM_2
|
2020-02-10 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
|
2020-02-07 |
Jan Mulder |
Added tag v1.5.2.beta release for changeset 54a480c43e97
maintain-2
|
2020-01-15 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
2020-01-15 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
|
2020-01-14 |
Ideenmodellierer |
merged default into Improvment_NVM
Improment_NVM
|
2020-01-14 |
ideenmodellierer |
Added compile switch for restoring of last known date after power lost:
Improment_NVM
|
2020-01-14 |
ideenmodellierer |
Bugfix Flipdisplay Gauge and Apnoe mode:
Improment_NVM
|
2020-01-14 |
ideenmodellierer |
Bugfix: Warnings displayed in Gauge Mode:
Improment_NVM
|
2020-01-13 |
ideenmodellierer |
Bugfix: Limit log length in case of corrupted sample storage:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix display compass calibration frozen:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix invalid voltage / temperatur after coldstart:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix parallel call of external flash functions:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix Min max values for device data checks:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix Display of Sensor values:
Improment_NVM
|
2020-01-12 |
ideenmodellierer |
Bugfix: display of time of minimum voltag:
Improment_NVM
|
2020-01-08 |
heinrichsweikamp |
We got one report of false/freezd depth reading when jumping into 2m depth
|
2020-01-05 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
|
2019-12-29 |
Ideenmodellierer |
merged default into ImproveBluetooth
ImproveBluetooth
|
2019-12-28 |
ideenmodellierer |
Added retry through power off/on cycle:
ImproveBluetooth
|
2019-12-21 |
ideenmodellierer |
Revert change to keep connection open in case of BlueMod messages:
ImproveBluetooth
|
2019-12-02 |
ideenmodellierer |
Bugfix: Merge / cleanup problem:
ImproveBluetooth
|
2019-12-01 |
ideenmodellierer |
Added missing enum for configuration states
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Added function for BlueMod configuration:
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Configurate FlowCntrl Pins as noPull
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Bugfix negativ ascend bar:
ImproveBluetooth
|
2019-11-26 |
ideenmodellierer |
Move Constants and libm to start of firmware ROM block:
ImproveBluetooth
|
2019-12-02 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
|
2019-12-01 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
2019-12-01 |
Jan Mulder |
Added tag v1.5.1 release for changeset afa55a50cc72
maintain-1
|
2019-11-24 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
|
2019-10-21 |
ideenmodellierer |
Added key direction awarness to t3, t5 and t6 views:
MotionDetection
|
2019-10-21 |
ideenmodellierer |
Finetune parameter for detection of small sectors as used for the pitch detection
MotionDetection
|
2019-10-17 |
ideenmodellierer |
Consider number of available t3 views in sector handling:
MotionDetection
|
2019-10-17 |
ideenmodellierer |
Combine variables in a structure to improve readability of code
MotionDetection
|
2019-10-10 |
Ideenmodellierer |
merge default
MotionDetection
|
2019-10-10 |
ideenmodellierer |
Simplified pitch detection state machine:
MotionDetection
|
2019-10-10 |
ideenmodellierer |
Minor code cleanup
MotionDetection
|
2019-09-16 |
ideenmodellierer |
Added missing customerview selection
MotionDetection
|
2019-09-16 |
ideenmodellierer |
Incremented "idle window" for scroll detection
MotionDetection
|
2019-09-16 |
ideenmodellierer |
Motion events effect custom view in dive mode only
MotionDetection
|
2019-09-16 |
ideenmodellierer |
Added string for Empty/ Debug custom view selection
MotionDetection
|
2019-09-10 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
2019-09-08 |
ideenmodellierer |
Removed some warnings
MotionDetection
|
2019-09-08 |
ideenmodellierer |
Add scroll event by pitch angle detection:
MotionDetection
|
2019-08-19 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
2019-08-19 |
ideenmodellierer |
Added parameter for number of sectors to be defined
MotionDetection
|
2019-08-13 |
ideenmodellierer |
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent
MotionDetection
|
2019-08-13 |
ideenmodellierer |
Added a function to count the active custom views.
MotionDetection
|
2019-08-13 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
2019-07-20 |
Ideenmodellierer |
Merge default
MotionDetection
|
2019-06-17 |
ideenmodellierer |
Fix misalignment of do while loop
MotionDetection
|
2019-06-17 |
ideenmodellierer |
Bugfix: selection of current view not working
MotionDetection
|
2019-06-17 |
ideenmodellierer |
Update call of motion detection function
MotionDetection
|
2019-06-17 |
ideenmodellierer |
Reworked detection function
MotionDetection
|
2019-06-11 |
Ideenmodellierer |
Parameter update
MotionDetection
|
2019-06-11 |
Ideenmodellierer |
Pass action to customer vie update function.
MotionDetection
|
2019-05-24 |
ideenmodellierer |
Added trigger of middle button action in case of a detected shake
MotionDetection
|
2019-05-24 |
ideenmodellierer |
Added new files for motion detection (shaking) detection
MotionDetection
|
2019-11-24 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
2019-11-23 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
2019-11-23 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
2019-10-09 |
heinrichsweikamp |
Make a FW 1.5.1 / RTE 2.0 binary for testing
v1.5.1 release
|
2019-10-09 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
|
2019-10-08 |
Jan Mulder |
Added tag v1.5.0 release for changeset 143fe85f82a2
fix-merge-mess
|
2019-10-08 |
Jan Mulder |
Fix merge problem
fix-merge-mess
|
2019-10-06 |
heinrichsweikamp |
Merge
|
2019-10-06 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
|
2019-10-03 |
ideenmodellierer |
Decrease ManualExitDiveCounter in surface mode
FlightMode_Improvment
|
2019-10-03 |
ideenmodellierer |
Minor changes to debug view
FlightMode_Improvment
|
2019-10-03 |
ideenmodellierer |
Added option to manually leave dive mode to system menu
FlightMode_Improvment
|
2019-10-03 |
ideenmodellierer |
Added function to support manuel exit of dive mode
FlightMode_Improvment
|
2019-10-03 |
ideenmodellierer |
Added function to evaluate the state of the surface pressure history memory
FlightMode_Improvment
|
2019-10-01 |
ideenmodellierer |
Removed not used wireless menu items
FlightMode_Improvment
|
2019-10-01 |
ideenmodellierer |
Added compile switch to enable debug view option in system menu
FlightMode_Improvment
|
2019-10-01 |
ideenmodellierer |
Removed averaging of pressure and temperatur values
FlightMode_Improvment
|
2019-10-06 |
heinrichsweikamp |
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
|
2019-08-19 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
|
2019-08-17 |
ideenmodellierer |
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
PressureMeasure_Improvment
|
2019-08-17 |
ideenmodellierer |
Added function to avoid divemode activation during Landing:
PressureMeasure_Improvment
|
2019-08-17 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
2019-08-17 |
ideenmodellierer |
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing)
PressureMeasure_Improvment
|
2019-08-13 |
ideenmodellierer |
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
PressureMeasure_Improvment
|
2019-08-04 |
heinrichsweikamp |
building a 1.5
v1.5.0 release
|
2019-07-20 |
heinrichsweikamp |
add update files for testing purposes
|
2019-07-18 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
|
2019-07-17 |
ideenmodellierer |
Added plausibility check for pressure values
I2C_Improvment
|
2019-07-17 |
ideenmodellierer |
Added check of configuration.
I2C_Improvment
|
2019-07-17 |
ideenmodellierer |
Improved startup robustness
I2C_Improvment
|
2019-07-17 |
ideenmodellierer |
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery
I2C_Improvment
|
2019-07-17 |
ideenmodellierer |
Deactivated internal pullups and I2C interrupt callback
I2C_Improvment
|
2019-07-01 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
|
2019-06-20 |
Jan Mulder |
bugfix: implement battery at end in dive header
fix-batt-1
|
2019-06-30 |
heinrichsweikamp |
increase RTE to 1.9 and Firmware to 1.4.9 beta
|
2019-06-30 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
|
2019-06-30 |
ideenmodellierer |
Added start of frame detection for HUD data
O2_SensorSync
|
2019-06-30 |
ideenmodellierer |
Moved indication variable for received HUD data to tCCR file.
O2_SensorSync
|
2019-06-19 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-version (pull request #27)
|
2019-06-19 |
Jan Mulder |
bugfix: correct packed main version number in dive header
fix-version
|
2019-06-19 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
|
2019-06-17 |
ideenmodellierer |
Resolved warning
Bugfix_Flip_FirmwareUpdate
|
2019-06-17 |
ideenmodellierer |
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update
Bugfix_Flip_FirmwareUpdate
|
2019-06-17 |
ideenmodellierer |
Bugfix Overview, O2 values and mV in flip display mode
Bugfix_Flip_FirmwareUpdate
|
2019-06-17 |
ideenmodellierer |
Reinitialize logos after flip of display
Bugfix_Flip_FirmwareUpdate
|
2019-06-01 |
heinrichsweikamp |
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
|
2019-05-31 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
|
2019-05-29 |
Jan Mulder |
bugfix: make stopwatch and divetime run in sync
cleanup-4
|
2019-05-26 |
Jan Mulder |
Make dive mode detection more advanced
cleanup-4
|
2019-05-24 |
Jan Mulder |
cleanup: factor out SHelper typedef (and more)
cleanup-4
|
2019-05-24 |
Jan Mulder |
cleanup: introduce function setAvgDepth
cleanup-4
|
2019-05-22 |
Jan Mulder |
cleanup: factor out unused stopwatch code
cleanup-4
|
2019-05-22 |
Jan Mulder |
bugfix, cleanup: do not clip depth to 0
cleanup-4
|
2019-05-21 |
Jan Mulder |
bugfix, consistency: show deco/NDL really after 1 minute divetime
cleanup-4
|
2019-05-20 |
Jan Mulder |
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime
cleanup-4
|
2019-05-20 |
Jan Mulder |
bugfix, cleanup: simplify stopwatch logic and fix fallout
cleanup-4
|
2019-05-20 |
Jan Mulder |
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync
cleanup-4
|
2019-05-20 |
Jan Mulder |
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level
cleanup-4
|
2019-05-17 |
Jan Mulder |
cleanup: remove commented/unused code, make static
cleanup-4
|
2019-05-17 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
|
2019-05-16 |
Jan Mulder |
Bugfix: fix drawing of CCR bailout profile
cleanup-3
|
2019-05-16 |
Jan Mulder |
cleanup: remove unused code, make static, remove commented code
cleanup-3
|
2019-05-16 |
Jan Mulder |
Possible bugfix: do not use bitwise and (&)
cleanup-3
|
2019-05-13 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
|
2019-05-12 |
Jan Mulder |
Added tag v1.4.8 release for changeset ba9d99a2e310
div-fixes-6
|
2019-05-02 |
Jan Mulder |
bugfix, consistency: show deco, NDL after 1 minute
div-fixes-6
|
2019-05-02 |
Jan Mulder |
translate: nullzeit -> ndl
div-fixes-6
|
2019-05-02 |
Jan Mulder |
Deco Models: limit NDL to 240 minutes
div-fixes-6
|
2019-05-02 |
Jan Mulder |
VPM, cleanup: 1st round
div-fixes-6
|
2019-04-29 |
Jan Mulder |
cleanup: remove unused code
div-fixes-6
|
2019-04-29 |
Jan Mulder |
cleanup: no useless checks for simulator state
div-fixes-6
|
2019-05-06 |
heinrichsweikamp |
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware.
v1.4.8 release
|
2019-05-06 |
heinrichsweikamp |
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
|
2019-05-05 |
heinrichsweikamp |
add update files for testing purposes
|
2019-05-02 |
heinrichsweikamp |
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
|
2019-05-02 |
Jan Mulder |
Bugfix: write NDL in logbook correctly
ndl-in-logbook
|
2019-05-01 |
heinrichsweikamp |
translate some comments into english
|
2019-05-01 |
heinrichsweikamp |
Fix typos (There are still many...)
|
2019-04-29 |
heinrichsweikamp |
Make RTE show as 1.8.0 beta, add update files for testing purposes
|
2019-04-28 |
heinrichsweikamp |
add update files for testing purposes
|
2019-04-28 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
|
2019-04-28 |
ideenmodellierer |
Rework SPI error handling.
IPC_Sync_Improvment_3
|
2019-04-28 |
ideenmodellierer |
Rework pressure/ temperature data aquisition
IPC_Sync_Improvment_3
|
2019-04-28 |
ideenmodellierer |
Do not mark data as valid if devicedata is received.
IPC_Sync_Improvment_3
|
2019-04-28 |
heinrichsweikamp |
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
|
2019-04-28 |
heinrichsweikamp |
Merged in janlmulder/ostc4/write-from-sim (pull request #20)
|
2019-04-27 |
Jan Mulder |
cleanup: simplify stateUsed usage
write-from-sim
|
2019-04-27 |
Jan Mulder |
cleanup: also write gas and setpoint changes in simulator mode
write-from-sim
|
2019-04-24 |
Jan Mulder |
feature, debug: make simulator write a logbook entry
write-from-sim
|
2019-04-23 |
Jan Mulder |
cleanup: do not pass large struct by value
write-from-sim
|
2019-04-23 |
Jan Mulder |
cleanup: make things static where possible.
write-from-sim
|
2019-04-26 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
|
2019-04-14 |
ideenmodellierer |
Added batch to copy bins from release folder
IPC_Sync_Improvment_2
|
2019-04-14 |
ideenmodellierer |
Increase SPI com timeout for cold start and wake up
IPC_Sync_Improvment_2
|
2019-04-14 |
ideenmodellierer |
Sync to Main 100ms time stamp & added Reinitialization of globals after startup
IPC_Sync_Improvment_2
|
2019-04-14 |
ideenmodellierer |
Forward 100ms time stamp to RTE and handle logbook in main loop
IPC_Sync_Improvment_2
|
2019-04-23 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-3 (pull request #19)
|
2019-04-23 |
Jan Mulder |
Bugfix: do not reset saturation on surfacing
bm-3
|
2019-04-23 |
Jan Mulder |
Added tag V1.4.7 release for changeset 1b9be6040d82
bm-3
|
2019-04-15 |
Jan Mulder |
feature: allow new saturation to be set in lower left corner
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: factor out another global gDecotable
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: factor out gNDL and gTTS
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: trivial performance improvement (NDL)
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: cleanup, factor out pBuDiveSettings
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: cleanup, remove global pDecolistBuehlmann
bm-3
|
2019-04-12 |
Jan Mulder |
Buehlmann: cleanup, whitespace, static
bm-3
|
2019-04-13 |
heinrichsweikamp |
Minor: Typo fixed in bootloader screen
V1.4.7 release
|
2019-04-12 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-2 (pull request #17)
|
2019-04-11 |
Jan Mulder |
Buelmann: new implementation for ceiling
bm-2
|
2019-04-11 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-1 (pull request #16)
|
2019-04-10 |
Jan Mulder |
Fix stupid commit error
bm-1
|
2019-04-09 |
Jan Mulder |
feature: Relative GF to Saturation renames
bm-1
|
2019-04-09 |
Jan Mulder |
feature: replace Relative GF by saturation, computational only
bm-1
|
2019-04-10 |
heinrichsweikamp |
add update files for testing purposes
|
2019-04-09 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
|
2019-04-08 |
Jan Mulder |
debug: add SPI error counter to compass calibration
div-fixes-5
|
2019-04-08 |
Jan Mulder |
Comply to datasheet when resetting battery gauge registers
div-fixes-5
|
2019-04-08 |
Jan Mulder |
cleanup: factor out I2C1_Status() and cleanup type
div-fixes-5
|
2019-04-08 |
Jan Mulder |
Improvement SPI stability/recoverability
div-fixes-5
|
2019-04-08 |
Jan Mulder |
cleanup: factor out dataSendToSlaveStopEval
div-fixes-5
|
2019-04-08 |
Jan Mulder |
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
div-fixes-5
|
2019-04-06 |
Jan Mulder |
Bugfix: do not show NDL in bigscreen mode when zero
div-fixes-5
|
2019-04-06 |
heinrichsweikamp |
Minor: translating some comments and variable names into english, some cleanup in tComm.c
|
2019-04-06 |
heinrichsweikamp |
add update files for testing purposes
|
2019-04-06 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
|
2019-04-05 |
Jan Mulder |
cleanup, bugfix: do not exit simulator on 5h dive time
div-fixes-4-1
|
2019-04-03 |
Jan Mulder |
Bugfix: make date/time setting work over reboots
div-fixes-4-1
|
2019-04-03 |
Jan Mulder |
cleanup: do not re-implement a standard function
div-fixes-4-1
|
2019-04-03 |
Jan Mulder |
cleanup: make return void when never used
div-fixes-4-1
|
2019-04-02 |
Jan Mulder |
cleanup: fix recent extra compiler warnings
div-fixes-4-1
|
2019-04-02 |
Jan Mulder |
Bugfix: set battery percentage correctly after RTE update
div-fixes-4-1
|
2019-04-02 |
heinrichsweikamp |
add update files for testing purposes
|
2019-04-01 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
|
2019-04-01 |
Jan Mulder |
cleanup: random set of cleanups
div-fixes-3
|
2019-03-31 |
Jan Mulder |
Bugfix, deco: fix 2 (small) problems with calculated ceiling
div-fixes-3
|
2019-03-31 |
Jan Mulder |
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
div-fixes-3
|
2019-03-29 |
Jan Mulder |
Bugfix: correct presentation error in tissues custom view
div-fixes-3
|
2019-04-01 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
|
2019-03-31 |
ideenmodellierer |
Added schedule point for functions executed once in a second
Improve_IPC_Sync
|
2019-03-31 |
ideenmodellierer |
Resolved some minor warnings
Improve_IPC_Sync
|
2019-03-31 |
ideenmodellierer |
Splitted 120 seconds UART timeout into chunks of 500ms
Improve_IPC_Sync
|
2019-03-31 |
ideenmodellierer |
Moved display refresh and button action function from tim callback to main loop
Improve_IPC_Sync
|
2019-03-28 |
heinrichsweikamp |
Merged in janlmulder/ostc4/edit-fix (pull request #11)
|
2019-03-28 |
Jan Mulder |
Bugfix, trivial: correctly present avg depth in overview custom
edit-fix
|
2019-03-28 |
Jan Mulder |
Bugfix: handle rounding of TTS and future TTS consistently
edit-fix
|
2019-03-27 |
Jan Mulder |
Bugfix, trivial: do not visit 9 on first digit for setpoint
edit-fix
|
2019-03-26 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cv-persistent (pull request #10)
|
2019-03-26 |
Jan Mulder |
New feature: do not show sensor customviews when no sensors attached
cv-persistent
|
2019-03-26 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
2019-03-24 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
|
2019-03-24 |
ideenmodellierer |
Update SPI error display and handling
ImprovmentSPI
|
2019-03-24 |
ideenmodellierer |
Introduce scheduler function
ImprovmentSPI
|
2019-03-24 |
ideenmodellierer |
Moved EvaluateButton into 100ms callback
ImprovmentSPI
|
2019-03-24 |
ideenmodellierer |
Deleted duplicated header file (keep the one stored in common)
ImprovmentSPI
|
2019-03-23 |
ideenmodellierer |
Starting 'ImprovmentSPI' branch
ImprovmentSPI
|
2019-03-23 |
Ideenmodellierer |
merge fork
|
2019-03-17 |
Thorsten |
Merged heinrichsweikamp/ostc4 into default
|
2019-03-16 |
Thorsten |
Merged Cleanup_Compass_Wireless into default
|
2019-03-22 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
|
2019-03-22 |
Jan Mulder |
Bugfix: fix initial CNS data in the logbook header
div-fixes-cleaup-2
|
2019-03-21 |
Jan Mulder |
cleanup: another cleanup session (data_exchange_main.c)
div-fixes-cleaup-2
|
2019-03-21 |
Jan Mulder |
cleanup: fix (harmless) use before assign
div-fixes-cleaup-2
|
2019-03-20 |
Jan Mulder |
Bugfix, minor: color the overview customview correctly
div-fixes-cleaup-2
|
2019-03-19 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
|
2019-03-19 |
Jan Mulder |
cleanup: more trivial cleanup (logbook.c/h)
div-fixes-cleanup-1
|
2019-03-16 |
Jan Mulder |
Bugfix: show proper dive mode
div-fixes-cleanup-1
|
2019-03-16 |
Jan Mulder |
cleanup: fix compiler warning
div-fixes-cleanup-1
|
2019-03-16 |
Jan Mulder |
cleanup: remove unused include file t9.h
div-fixes-cleanup-1
|
2019-03-15 |
heinrichsweikamp |
Merged in janlmulder/ostc4/avg-temp (pull request #6)
|
2019-03-15 |
Jan Mulder |
Bugfix: average temperature on arrival from RTE instead of display time
avg-temp
|
2019-03-15 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
|
2019-03-15 |
Jan Mulder |
cleanup: forgotten cleanup from 9da7dd50e2ec
cleanup-2
|
2019-03-15 |
Jan Mulder |
cleanup: remove obsolete code, make static, etc.
cleanup-2
|
2019-03-15 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
|
2019-03-14 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
2019-03-14 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
2019-03-14 |
ideenmodellierer |
Resolve fixme comments
Cleanup_Compass_Wireless
|
2019-03-13 |
ideenmodellierer |
Removed not suppoted wireless feature
Cleanup_Compass_Wireless
|
2019-03-13 |
ideenmodellierer |
Removed not used compass code
Cleanup_Compass_Wireless
|
2019-03-13 |
ideenmodellierer |
Starting 'Cleanup_Compass_Wireless' branch
Cleanup_Compass_Wireless
|
2019-03-13 |
heinrichsweikamp |
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
|
2019-03-12 |
heinrichsweikamp |
Merged in janlmulder/ostc4/max-depth (pull request #3)
|
2019-03-11 |
Jan Mulder |
cleanup: do not assign to same
max-depth
|
2019-03-11 |
Jan Mulder |
cleanup: remove unused code
max-depth
|
2019-03-11 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 2)
max-depth
|
2019-03-11 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 1)
max-depth
|
2019-03-10 |
heinrichsweikamp |
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
|
2019-03-10 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
|
2019-03-10 |
Jan Mulder |
Fix accidentally pushed local code
cleanup-1
|
2019-03-10 |
Jan Mulder |
Bugfix: highlight the menu underline correctly on selected state
cleanup-1
|
2019-03-08 |
Jan Mulder |
Close branch linux-build.
linux-build
|
2019-03-08 |
Jan Mulder |
cleanup: local data and functions can be static (tMenu)
cleanup-1
|
2019-03-07 |
Jan Mulder |
cleanup: get rid of some compile warnings
cleanup-1
|
2019-03-08 |
heinrichsweikamp |
Minor: Some documentation for new hardware
|
2019-03-07 |
heinrichsweikamp |
Merged in janlmulder/ostc4/linux-build (pull request #1)
|
2019-02-21 |
Jan Mulder |
Add Linux pack script
linux-build
|
2019-02-21 |
Jan Mulder |
OSTC4pack_V4: do not hard code output filename for fonts
linux-build
|
2019-02-21 |
Jan Mulder |
Add missing file for self build pack tools
linux-build
|
2019-03-07 |
heinrichsweikamp |
Merge with FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Fix for flipped display
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Bugfix button translation
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Binaries for beta testing
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Removed special indicator for DMA transfer error
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Do hard sync after communication timeout > 1 second
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Keep NSS low during SPI transfer only
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Added definitions for SPI sequence counter
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Moved button evaluation out of interrupt handler
FlipDisplay
|
2019-03-03 |
Ideenmodellierer |
Bugfix ButtonResponsiveness
FlipDisplay
|
2019-03-02 |
Ideenmodellierer |
Place CNS and pressure within the screen (avoid clipping)
FlipDisplay
|
2019-03-02 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
2019-03-02 |
Ideenmodellierer |
Use SPI TX callback to synchronize to main CPU
FlipDisplay
|
2019-03-02 |
Ideenmodellierer |
Forward compass data during calibration mode
FlipDisplay
|
2019-03-02 |
Ideenmodellierer |
RTE Version 1.7 needed because of protocoll and baud rate change
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Adjust voltage location
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Use one global structure for schedule data
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Introduced Token for SPI data exchange
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Use one global structure for all schedule counters
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Only use data if data frame is valid
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Increase prescalar => frame takes about 4ms.
FlipDisplay
|
2019-02-28 |
Ideenmodellierer |
Get version from local memory instead from incoming data
FlipDisplay
|
2019-02-23 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Only copy data if data connection to RTE is valid
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Introduces abort of communication in case of a out of sync DMA transfer
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Restore old data copy locations
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Removed cyclic (by timer) send on slave side
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Intoduced transfer abort function for data exchange recovery
FlipDisplay
|
2019-02-19 |
Ideenmodellierer |
Add compile switch to disable optimization for specific function
FlipDisplay
|
2019-02-17 |
Ideenmodellierer |
Update of configuration and projectfiles to support new library folder structure
FlipDisplay
|
2019-02-17 |
Ideenmodellierer |
Minor changes to improved code quality and to eliminate warnings
FlipDisplay
|
2019-02-17 |
Ideenmodellierer |
Added function to initialise structures with the actual ambient pressure
FlipDisplay
|
2019-02-17 |
Ideenmodellierer |
Added current STM32 standandard libraries in version independend folder structure
FlipDisplay
|
2019-02-17 |
Ideenmodellierer |
Drop old STM32 standard librarey files
FlipDisplay
|
2019-02-03 |
heinrichsweikamp |
build files
kittz
|
2019-01-27 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
2019-01-27 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
2019-01-27 |
Ideenmodellierer |
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings)
FlipDisplay
|
2019-01-13 |
Ideenmodellierer |
Take care for display orientation if deleting lines
FlipDisplay
|
2019-01-13 |
Ideenmodellierer |
Use 32bit operations for buffer fills
FlipDisplay
|
2019-01-08 |
Ideenmodellierer |
Cleanup warning and disable printf calls
FlipDisplay
|
2019-01-06 |
Ideenmodellierer |
Cleanup writechar pointers
FlipDisplay
|
2019-01-06 |
Ideenmodellierer |
Enlarge text limits to get string displayed completly
FlipDisplay
|
2019-01-06 |
Ideenmodellierer |
Submenus may have 6 items
FlipDisplay
|
2019-01-06 |
Ideenmodellierer |
Added small helper for runtime evaluation
FlipDisplay
|
2019-01-03 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
2019-01-03 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Binaries of development snapshot
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Added option to handled mirrored display to existing functions
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Consider computer heading in case of a flipped display
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Flip key assigment if needed
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Next text ID for display flip
FlipDisplay
|
2019-01-01 |
Ideenmodellierer |
Starting 'FlipDisplay' branch
FlipDisplay
|
2018-12-24 |
Dmitry Romanov |
fix comments
kittz
|
2018-12-24 |
Dmitry Romanov |
Tested and alive.
kittz
|
2018-11-28 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
2018-11-27 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
2018-11-27 |
Dmitry Romanov |
globals
kittz
|
2018-11-27 |
Dmitry Romanov |
Stable.fix.
kittz
|
2018-11-26 |
Dmitry Romanov |
Config for debug data
kittz
|
2018-11-26 |
Dmitry Romanov |
+2ms delay
kittz
|
2018-11-26 |
Dmitry Romanov |
fix comments
kittz
|
2018-11-26 |
Dmitry Romanov |
Sorry. Now.
kittz
|
2018-11-26 |
Dmitry Romanov |
Debounce. Bounced buttons fixed.
kittz
|
2018-11-26 |
Dmitry Romanov |
reduce i2c speed and dutycycle for compass stability
kittz
|
2018-11-26 |
Dmitry Romanov |
a bit of
kittz
|
2018-11-26 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
2018-11-26 |
Dmitry Romanov |
First stable. With minimal button sensitivity fix(for broken buttons)
kittz
|
2018-11-23 |
Dmitry Romanov |
+- stable
kittz
|
2018-11-23 |
Dmitry Romanov |
temp! full cyclic SPI
kittz
|
2018-11-22 |
Dmitry Romanov |
revert
kittz
|
2018-11-21 |
Dmitry Romanov |
tmp
kittz
|
2018-11-21 |
Dmitry Romanov |
fix time&date after wakeup
kittz
|
2018-11-21 |
Dmitry Romanov |
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ
kittz
|
2018-11-21 |
Dmitry Romanov |
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
kittz
|
2018-11-20 |
Dmitry Romanov |
???????
kittz
|
2018-11-20 |
Dmitry Romanov |
+i2c analog noise filtering
kittz
|
2018-11-20 |
Dmitry Romanov |
Created new branch kittz
kittz
|
2018-10-06 |
heinrichsweikamp |
Added Spanish language
|
2018-10-04 |
Ideenmodellierer |
Added Fontpack reference project
|
2018-10-04 |
Ideenmodellierer |
Added script to pack FontPack
|
2018-10-04 |
Ideenmodellierer |
Starting Firmware 1.4 the fontpack version 1.0 is needed
|
2018-10-04 |
Ideenmodellierer |
Update Fontpack code to support font moved to upper memory
|
2018-10-04 |
Ideenmodellierer |
Update version info
|
2018-10-04 |
Ideenmodellierer |
Move font to upper memory
|
2018-10-04 |
Ideenmodellierer |
Add definitions for Fonts to be placed in upper flash
|
2018-09-11 |
heinrichsweikamp |
Merge
|
2018-09-05 |
heinrichsweikamp |
remove wiki files from repo
|
2018-09-11 |
heinrichsweikamp |
old (and new) compass support
|
2018-08-30 |
heinrichsweikamp |
1.3.8 forum release
|
2018-08-22 |
Ideenmodellierer |
Update image size for 'F'ahrenheit
|
2018-08-22 |
Ideenmodellierer |
Bugfix: FutureTTS and Fahrenheit not displayed correct
|
2018-08-15 |
heinrichsweikamp |
language updates
|
2018-08-14 |
heinrichsweikamp |
language updates
|
2018-08-14 |
heinrichsweikamp |
typo in info menu...
|
2018-08-13 |
Ideenmodellierer |
Replaced wait loop with delay fct
|
2018-08-12 |
Ideenmodellierer |
Bugfix font elements (ue missing)
|
2018-08-11 |
heinrichsweikamp |
rename update batch file
|
2018-08-10 |
heinrichsweikamp |
more language updates
|
2018-08-10 |
heinrichsweikamp |
language updates
|
2018-08-09 |
Ideenmodellierer |
Added UTF8 decode function
|
2018-08-09 |
Ideenmodellierer |
Resolve format warnings
|
2018-08-07 |
heinrichsweikamp |
language updates
|
2018-08-06 |
heinrichsweikamp |
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
|
2018-08-05 |
Ideenmodellierer |
Added missing ENTRY point
|
2018-08-05 |
Ideenmodellierer |
Allow RTE binaries > 64k size
|
2018-08-05 |
Ideenmodellierer |
Added reference projects
|
2018-07-31 |
Ideenmodellierer |
Resolved warnings pointing to possible invalid memory access
|
2018-07-30 |
heinrichsweikamp |
remove hgsub files
|
2018-07-30 |
heinrichsweikamp |
add o4pack files
|
2018-07-29 |
Ideenmodellierer |
Increased version number
|
2018-07-29 |
Ideenmodellierer |
Added instruction to optimize for size
|
2018-07-29 |
Ideenmodellierer |
Always include Fonts library (to have the adresses defined)
|
2018-07-29 |
Ideenmodellierer |
Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
|
2018-07-29 |
Ideenmodellierer |
Placed directory sections in firmware memory space
|
2018-07-29 |
Ideenmodellierer |
Split memory areas and reverse engineered font library
|
2018-07-29 |
Ideenmodellierer |
Force reset in case of a hard fault
|
2018-07-29 |
Ideenmodellierer |
Non functional change just to use same symbols as CPU1
|
2018-07-29 |
Ideenmodellierer |
Aligned structure with CPU1 linker file
|
2018-07-29 |
Ideenmodellierer |
Increase version number
|
2018-04-28 |
heinrichsweikamp |
include in ostc4 repository
|
2018-04-28 |
heinrichsweikamp |
init
|
2018-04-28 |
heinrichsweikamp |
Update author name for release
|
2018-03-07 |
jDG |
... more GPL License and general cleanups
|
2018-03-07 |
jDG |
... OpenOCD scripts to dump firmwares (not working)
|
2018-02-27 |
jDG |
... minor warnings
|
2018-02-10 |
heinrichsweikamp |
change author name to heinrichs weikamp gmbh
|
2018-02-06 |
jDG |
[ADD]Discovery/Src licences, plus reindentation
|
2018-01-23 |
jDG |
ADD GPL License ...
|
2018-01-23 |
jDG |
ADD script to set GPL headers
|
2018-01-10 |
JeanDo |
... Fighting with internal oscillator.
|
2018-01-10 |
JeanDo |
ADD C indentation standard
|
2018-01-09 |
jDG |
... single step in Discovery code: trying to have an oscillator.
|
2018-01-03 |
jdg |
FIX move bootloader SFirmwareData at fixed address 0x0800A000
|
2018-01-01 |
JeanDo |
ADD font check code that runs at FontPack installation.
|
2018-01-01 |
JeanDo |
ADD missing chars in FontPack
|
2018-01-01 |
JeanDo |
FIX need to link actual FirmwareData too...
|
2018-01-01 |
JeanDo |
FIX shared SFirmwareData signature at fixed address
|
2017-12-30 |
jdg |
NEW shared font directory at 0x081E0000
|
2017-12-26 |
jdg |
... more docs
|
2017-12-26 |
jdg |
... typo in subrepo ?
|
2017-12-26 |
jdg |
ADD wiki sub-repos
|
2017-12-26 |
jdg |
... FontPack CPU1 project
|
2017-12-19 |
JeanDo |
FIRST CPU2-RTE LINKING VERSION
|
2017-12-19 |
JeanDo |
FIX move fonts to UPPER ROM SECTION (above 0x8100000)
|
2017-12-19 |
JeanDo |
ADD CPU1 pin layout
|
2017-12-19 |
jDG |
FIRST CPU1-DISCOVERY LINKING VERSION
|
2017-12-19 |
jDG |
CLEANUP move driver code to Common/Drivers
|
2017-12-18 |
JeanDo |
FIX text_multilanguage shall be compiled once
|
2017-12-18 |
JeanDo |
FIX recover jeopardized fonts & images structure
|
2017-12-18 |
jDG |
... move absolute data to named sections
|
2017-12-18 |
jDG |
CLEAN retrieve original startup code. reset linker script.
|
2017-12-15 |
JeanDo |
... more clean
|
2017-12-15 |
JeanDo |
MOVE files for other applications
|
2017-12-13 |
jDG |
... debugging Discovery project compilation.
|
2017-12-13 |
jDG |
CLEANUP remove duplicated support sources
|
2017-12-13 |
jDG |
CLEANUP make svn: subdirectories windows and macos compatibles
|
2017-12-12 |
jDG |
Add chip documentations
|
2017-12-12 |
jDG |
ADD sub repositories
|