Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 268: (0) -240 +240 tip
age author description
Tue, 23 Apr 2019 17:41:20 +0200 Jan Mulder cleanup: make things static where possible. write-from-sim
Fri, 26 Apr 2019 10:36:11 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
Sun, 14 Apr 2019 14:27:32 +0200 ideenmodellierer Added batch to copy bins from release folder IPC_Sync_Improvment_2
Sun, 14 Apr 2019 14:22:41 +0200 ideenmodellierer Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2
Sun, 14 Apr 2019 11:43:29 +0200 ideenmodellierer Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2
Sun, 14 Apr 2019 11:38:14 +0200 ideenmodellierer Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2
Tue, 23 Apr 2019 14:21:32 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-3 (pull request #19)
Tue, 23 Apr 2019 13:05:20 +0200 Jan Mulder Bugfix: do not reset saturation on surfacing bm-3
Tue, 23 Apr 2019 09:25:18 +0200 Jan Mulder Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3
Mon, 15 Apr 2019 17:35:47 +0200 Jan Mulder feature: allow new saturation to be set in lower left corner bm-3
Fri, 12 Apr 2019 22:00:07 +0200 Jan Mulder Buehlmann: factor out another global gDecotable bm-3
Fri, 12 Apr 2019 21:04:52 +0200 Jan Mulder Buehlmann: factor out gNDL and gTTS bm-3
Fri, 12 Apr 2019 19:05:49 +0200 Jan Mulder Buehlmann: trivial performance improvement (NDL) bm-3
Fri, 12 Apr 2019 15:26:14 +0200 Jan Mulder Buehlmann: cleanup, factor out pBuDiveSettings bm-3
Fri, 12 Apr 2019 14:46:48 +0200 Jan Mulder Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3
Fri, 12 Apr 2019 10:43:52 +0200 Jan Mulder Buehlmann: cleanup, whitespace, static bm-3
Sat, 13 Apr 2019 14:36:33 +0200 heinrichsweikamp Minor: Typo fixed in bootloader screen V1.4.7 release
Fri, 12 Apr 2019 07:22:14 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-2 (pull request #17)
Thu, 11 Apr 2019 17:48:48 +0200 Jan Mulder Buelmann: new implementation for ceiling bm-2
Thu, 11 Apr 2019 10:26:22 +0000 heinrichsweikamp Merged in janlmulder/ostc4/bm-1 (pull request #16)
Wed, 10 Apr 2019 17:55:46 +0200 Jan Mulder Fix stupid commit error bm-1
Tue, 09 Apr 2019 16:30:21 +0200 Jan Mulder feature: Relative GF to Saturation renames bm-1
Tue, 09 Apr 2019 15:38:31 +0200 Jan Mulder feature: replace Relative GF by saturation, computational only bm-1
Wed, 10 Apr 2019 11:04:56 +0200 heinrichsweikamp add update files for testing purposes
Tue, 09 Apr 2019 08:52:44 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
Mon, 08 Apr 2019 12:35:59 +0200 Jan Mulder debug: add SPI error counter to compass calibration div-fixes-5
Mon, 08 Apr 2019 12:02:07 +0200 Jan Mulder Comply to datasheet when resetting battery gauge registers div-fixes-5
Mon, 08 Apr 2019 11:18:40 +0200 Jan Mulder cleanup: factor out I2C1_Status() and cleanup type div-fixes-5
Mon, 08 Apr 2019 11:49:13 +0200 Jan Mulder Improvement SPI stability/recoverability div-fixes-5
Mon, 08 Apr 2019 10:35:29 +0200 Jan Mulder cleanup: factor out dataSendToSlaveStopEval div-fixes-5
Mon, 08 Apr 2019 10:16:17 +0200 Jan Mulder cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5
Sat, 06 Apr 2019 20:35:21 +0200 Jan Mulder Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5
Sat, 06 Apr 2019 09:41:14 +0200 heinrichsweikamp Minor: translating some comments and variable names into english, some cleanup in tComm.c
Sat, 06 Apr 2019 09:11:39 +0200 heinrichsweikamp add update files for testing purposes
Sat, 06 Apr 2019 07:01:21 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
Fri, 05 Apr 2019 09:12:04 +0200 Jan Mulder cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1
Wed, 03 Apr 2019 21:11:56 +0200 Jan Mulder Bugfix: make date/time setting work over reboots div-fixes-4-1
Wed, 03 Apr 2019 14:33:12 +0200 Jan Mulder cleanup: do not re-implement a standard function div-fixes-4-1
Wed, 03 Apr 2019 14:16:59 +0200 Jan Mulder cleanup: make return void when never used div-fixes-4-1
Tue, 02 Apr 2019 15:11:42 +0200 Jan Mulder cleanup: fix recent extra compiler warnings div-fixes-4-1
Tue, 02 Apr 2019 14:53:15 +0200 Jan Mulder Bugfix: set battery percentage correctly after RTE update div-fixes-4-1
Tue, 02 Apr 2019 18:18:22 +0200 heinrichsweikamp add update files for testing purposes
Mon, 01 Apr 2019 19:19:04 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
Mon, 01 Apr 2019 15:50:41 +0200 Jan Mulder cleanup: random set of cleanups div-fixes-3
Sun, 31 Mar 2019 19:35:51 +0200 Jan Mulder Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3
Sun, 31 Mar 2019 15:14:06 +0200 Jan Mulder Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3
Fri, 29 Mar 2019 14:00:43 +0100 Jan Mulder Bugfix: correct presentation error in tissues custom view div-fixes-3
Mon, 01 Apr 2019 09:01:09 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
Sun, 31 Mar 2019 15:49:47 +0200 ideenmodellierer Added schedule point for functions executed once in a second Improve_IPC_Sync
Sun, 31 Mar 2019 15:44:56 +0200 ideenmodellierer Resolved some minor warnings Improve_IPC_Sync
Sun, 31 Mar 2019 15:44:12 +0200 ideenmodellierer Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_Sync
Sun, 31 Mar 2019 15:39:44 +0200 ideenmodellierer Moved display refresh and button action function from tim callback to main loop Improve_IPC_Sync
Thu, 28 Mar 2019 13:05:29 +0000 heinrichsweikamp Merged in janlmulder/ostc4/edit-fix (pull request #11)
Thu, 28 Mar 2019 09:54:29 +0100 Jan Mulder Bugfix, trivial: correctly present avg depth in overview custom edit-fix
Thu, 28 Mar 2019 08:26:17 +0100 Jan Mulder Bugfix: handle rounding of TTS and future TTS consistently edit-fix
Wed, 27 Mar 2019 15:12:26 +0100 Jan Mulder Bugfix, trivial: do not visit 9 on first digit for setpoint edit-fix
Tue, 26 Mar 2019 22:23:26 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cv-persistent (pull request #10)
Tue, 26 Mar 2019 16:02:22 +0100 Jan Mulder New feature: do not show sensor customviews when no sensors attached cv-persistent
Tue, 26 Mar 2019 13:00:15 +0100 Jan Mulder New feature: make selected customviews persistent cv-persistent
Sun, 24 Mar 2019 22:09:37 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
Sun, 24 Mar 2019 22:57:28 +0100 ideenmodellierer Update SPI error display and handling ImprovmentSPI
Sun, 24 Mar 2019 22:53:17 +0100 ideenmodellierer Introduce scheduler function ImprovmentSPI
Sun, 24 Mar 2019 22:51:15 +0100 ideenmodellierer Moved EvaluateButton into 100ms callback ImprovmentSPI
Sun, 24 Mar 2019 22:48:49 +0100 ideenmodellierer Deleted duplicated header file (keep the one stored in common) ImprovmentSPI
Sat, 23 Mar 2019 21:35:29 +0100 ideenmodellierer Starting 'ImprovmentSPI' branch ImprovmentSPI
Sat, 23 Mar 2019 21:32:16 +0100 Ideenmodellierer merge fork
Sun, 17 Mar 2019 19:16:59 +0100 Thorsten Merged heinrichsweikamp/ostc4 into default
Sat, 16 Mar 2019 19:58:52 +0000 Thorsten Merged Cleanup_Compass_Wireless into default
Fri, 22 Mar 2019 08:15:30 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
Fri, 22 Mar 2019 08:36:39 +0100 Jan Mulder Bugfix: fix initial CNS data in the logbook header div-fixes-cleaup-2
Thu, 21 Mar 2019 15:28:47 +0100 Jan Mulder cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-2
Thu, 21 Mar 2019 11:41:59 +0100 Jan Mulder cleanup: fix (harmless) use before assign div-fixes-cleaup-2
Wed, 20 Mar 2019 16:24:10 +0100 Jan Mulder Bugfix, minor: color the overview customview correctly div-fixes-cleaup-2
Tue, 19 Mar 2019 15:43:38 +0000 heinrichsweikamp Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
Tue, 19 Mar 2019 11:42:00 +0100 Jan Mulder cleanup: more trivial cleanup (logbook.c/h) div-fixes-cleanup-1
Sat, 16 Mar 2019 21:52:06 +0100 Jan Mulder Bugfix: show proper dive mode div-fixes-cleanup-1
Sat, 16 Mar 2019 21:08:18 +0100 Jan Mulder cleanup: fix compiler warning div-fixes-cleanup-1
Sat, 16 Mar 2019 21:02:10 +0100 Jan Mulder cleanup: remove unused include file t9.h div-fixes-cleanup-1
Fri, 15 Mar 2019 15:48:53 +0000 heinrichsweikamp Merged in janlmulder/ostc4/avg-temp (pull request #6)
Fri, 15 Mar 2019 15:04:57 +0100 Jan Mulder Bugfix: average temperature on arrival from RTE instead of display time avg-temp
Fri, 15 Mar 2019 12:55:58 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
Fri, 15 Mar 2019 12:53:14 +0100 Jan Mulder cleanup: forgotten cleanup from 9da7dd50e2ec cleanup-2
Fri, 15 Mar 2019 12:39:28 +0100 Jan Mulder cleanup: remove obsolete code, make static, etc. cleanup-2
Fri, 15 Mar 2019 08:22:16 +0000 heinrichsweikamp Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
Thu, 14 Mar 2019 20:44:23 +0100 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
Thu, 14 Mar 2019 20:44:03 +0100 ideenmodellierer Cleanup compiler warnings Cleanup_Compass_Wireless
Thu, 14 Mar 2019 20:43:47 +0100 ideenmodellierer Resolve fixme comments Cleanup_Compass_Wireless
Wed, 13 Mar 2019 21:51:25 +0100 ideenmodellierer Removed not suppoted wireless feature Cleanup_Compass_Wireless
Wed, 13 Mar 2019 21:49:25 +0100 ideenmodellierer Removed not used compass code Cleanup_Compass_Wireless
Wed, 13 Mar 2019 20:53:05 +0100 ideenmodellierer Starting 'Cleanup_Compass_Wireless' branch Cleanup_Compass_Wireless
Wed, 13 Mar 2019 20:51:50 +0100 heinrichsweikamp Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
Tue, 12 Mar 2019 15:04:19 +0000 heinrichsweikamp Merged in janlmulder/ostc4/max-depth (pull request #3)
Mon, 11 Mar 2019 20:20:17 +0100 Jan Mulder cleanup: do not assign to same max-depth
Mon, 11 Mar 2019 19:57:51 +0100 Jan Mulder cleanup: remove unused code max-depth
Mon, 11 Mar 2019 19:54:20 +0100 Jan Mulder Bugfix: make max depth move with current depth (part 2) max-depth
Mon, 11 Mar 2019 19:48:57 +0100 Jan Mulder Bugfix: make max depth move with current depth (part 1) max-depth
Sun, 10 Mar 2019 20:30:42 +0100 heinrichsweikamp Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
Sun, 10 Mar 2019 15:39:55 +0000 heinrichsweikamp Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
Sun, 10 Mar 2019 10:46:48 +0100 Jan Mulder Fix accidentally pushed local code cleanup-1
Sun, 10 Mar 2019 10:09:58 +0100 Jan Mulder Bugfix: highlight the menu underline correctly on selected state cleanup-1
Fri, 08 Mar 2019 19:26:36 +0000 Jan Mulder Close branch linux-build. linux-build
Fri, 08 Mar 2019 13:47:52 +0100 Jan Mulder cleanup: local data and functions can be static (tMenu) cleanup-1
Thu, 07 Mar 2019 21:52:23 +0100 Jan Mulder cleanup: get rid of some compile warnings cleanup-1
Fri, 08 Mar 2019 10:31:32 +0100 heinrichsweikamp Minor: Some documentation for new hardware
Thu, 07 Mar 2019 14:15:33 +0000 heinrichsweikamp Merged in janlmulder/ostc4/linux-build (pull request #1)
Thu, 21 Feb 2019 16:56:08 +0100 Jan Mulder Add Linux pack script linux-build
Thu, 21 Feb 2019 10:29:26 +0100 Jan Mulder OSTC4pack_V4: do not hard code output filename for fonts linux-build
Thu, 21 Feb 2019 10:01:36 +0100 Jan Mulder Add missing file for self build pack tools linux-build
Thu, 07 Mar 2019 15:06:43 +0100 heinrichsweikamp Merge with FlipDisplay
Sun, 03 Mar 2019 21:13:31 +0100 Ideenmodellierer Fix for flipped display FlipDisplay
Sun, 03 Mar 2019 21:12:06 +0100 Ideenmodellierer Bugfix button translation FlipDisplay
Sun, 03 Mar 2019 19:20:18 +0100 Ideenmodellierer Binaries for beta testing FlipDisplay
Sun, 03 Mar 2019 19:18:51 +0100 Ideenmodellierer Removed special indicator for DMA transfer error FlipDisplay
Sun, 03 Mar 2019 17:46:50 +0100 Ideenmodellierer Do hard sync after communication timeout > 1 second FlipDisplay
Sun, 03 Mar 2019 17:45:39 +0100 Ideenmodellierer Keep NSS low during SPI transfer only FlipDisplay
Sun, 03 Mar 2019 12:19:47 +0100 Ideenmodellierer Added definitions for SPI sequence counter FlipDisplay
Sun, 03 Mar 2019 12:18:44 +0100 Ideenmodellierer Moved button evaluation out of interrupt handler FlipDisplay
Sun, 03 Mar 2019 12:16:54 +0100 Ideenmodellierer Bugfix ButtonResponsiveness FlipDisplay
Sat, 02 Mar 2019 17:42:51 +0100 Ideenmodellierer Place CNS and pressure within the screen (avoid clipping) FlipDisplay
Sat, 02 Mar 2019 17:42:06 +0100 Ideenmodellierer Eliminate warnings FlipDisplay
Sat, 02 Mar 2019 17:01:06 +0100 Ideenmodellierer Use SPI TX callback to synchronize to main CPU FlipDisplay
Sat, 02 Mar 2019 16:57:59 +0100 Ideenmodellierer Forward compass data during calibration mode FlipDisplay
Sat, 02 Mar 2019 16:56:58 +0100 Ideenmodellierer RTE Version 1.7 needed because of protocoll and baud rate change FlipDisplay
Thu, 28 Feb 2019 20:05:51 +0100 Ideenmodellierer Adjust voltage location FlipDisplay
Thu, 28 Feb 2019 20:05:17 +0100 Ideenmodellierer Use one global structure for schedule data FlipDisplay
Thu, 28 Feb 2019 19:38:36 +0100 Ideenmodellierer Introduced Token for SPI data exchange FlipDisplay
Thu, 28 Feb 2019 19:34:08 +0100 Ideenmodellierer Use one global structure for all schedule counters FlipDisplay
Thu, 28 Feb 2019 19:07:10 +0100 Ideenmodellierer Only use data if data frame is valid FlipDisplay
Thu, 28 Feb 2019 19:03:29 +0100 Ideenmodellierer Increase prescalar => frame takes about 4ms. FlipDisplay
Thu, 28 Feb 2019 19:02:34 +0100 Ideenmodellierer Get version from local memory instead from incoming data FlipDisplay
Sat, 23 Feb 2019 21:10:51 +0100 Ideenmodellierer Removed no longer supported scooter code FlipDisplay
Tue, 19 Feb 2019 21:48:32 +0100 Ideenmodellierer Only copy data if data connection to RTE is valid FlipDisplay
Tue, 19 Feb 2019 18:20:45 +0100 Ideenmodellierer Introduces abort of communication in case of a out of sync DMA transfer FlipDisplay
Tue, 19 Feb 2019 18:18:37 +0100 Ideenmodellierer Restore old data copy locations FlipDisplay
Tue, 19 Feb 2019 18:16:59 +0100 Ideenmodellierer Removed cyclic (by timer) send on slave side FlipDisplay
Tue, 19 Feb 2019 18:15:35 +0100 Ideenmodellierer Intoduced transfer abort function for data exchange recovery FlipDisplay
Tue, 19 Feb 2019 18:13:18 +0100 Ideenmodellierer Add compile switch to disable optimization for specific function FlipDisplay
Sun, 17 Feb 2019 21:29:38 +0100 Ideenmodellierer Update of configuration and projectfiles to support new library folder structure FlipDisplay
Sun, 17 Feb 2019 21:22:13 +0100 Ideenmodellierer Minor changes to improved code quality and to eliminate warnings FlipDisplay
Sun, 17 Feb 2019 21:14:09 +0100 Ideenmodellierer Added function to initialise structures with the actual ambient pressure FlipDisplay
Sun, 17 Feb 2019 21:12:22 +0100 Ideenmodellierer Added current STM32 standandard libraries in version independend folder structure FlipDisplay
Sun, 17 Feb 2019 21:07:35 +0100 Ideenmodellierer Drop old STM32 standard librarey files FlipDisplay
Sun, 03 Feb 2019 10:04:27 +0100 heinrichsweikamp build files kittz
Sun, 27 Jan 2019 22:21:01 +0100 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
Sun, 27 Jan 2019 22:17:16 +0100 Ideenmodellierer Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay
Sun, 27 Jan 2019 22:01:07 +0100 Ideenmodellierer Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings) FlipDisplay
Sun, 13 Jan 2019 18:59:53 +0100 Ideenmodellierer Take care for display orientation if deleting lines FlipDisplay
Sun, 13 Jan 2019 18:58:23 +0100 Ideenmodellierer Use 32bit operations for buffer fills FlipDisplay
Tue, 08 Jan 2019 22:31:17 +0100 Ideenmodellierer Cleanup warning and disable printf calls FlipDisplay
Sun, 06 Jan 2019 22:33:26 +0100 Ideenmodellierer Cleanup writechar pointers FlipDisplay
Sun, 06 Jan 2019 22:31:45 +0100 Ideenmodellierer Enlarge text limits to get string displayed completly FlipDisplay
Sun, 06 Jan 2019 22:30:35 +0100 Ideenmodellierer Submenus may have 6 items FlipDisplay
Sun, 06 Jan 2019 22:27:46 +0100 Ideenmodellierer Added small helper for runtime evaluation FlipDisplay
Thu, 03 Jan 2019 19:59:36 +0100 Ideenmodellierer Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e FlipDisplay
Thu, 03 Jan 2019 18:35:11 +0100 Ideenmodellierer Eliminate warnings FlipDisplay
Tue, 01 Jan 2019 21:04:01 +0100 Ideenmodellierer Binaries of development snapshot FlipDisplay
Tue, 01 Jan 2019 21:03:33 +0100 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
Tue, 01 Jan 2019 21:03:10 +0100 Ideenmodellierer Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay
Tue, 01 Jan 2019 21:02:17 +0100 Ideenmodellierer Added option to handled mirrored display to existing functions FlipDisplay
Tue, 01 Jan 2019 21:00:55 +0100 Ideenmodellierer Consider computer heading in case of a flipped display FlipDisplay
Tue, 01 Jan 2019 21:00:13 +0100 Ideenmodellierer Flip key assigment if needed FlipDisplay
Tue, 01 Jan 2019 20:59:36 +0100 Ideenmodellierer Next text ID for display flip FlipDisplay
Tue, 01 Jan 2019 20:57:41 +0100 Ideenmodellierer Starting 'FlipDisplay' branch FlipDisplay
Mon, 24 Dec 2018 16:19:09 +0300 Dmitry Romanov fix comments kittz
Mon, 24 Dec 2018 16:15:02 +0300 Dmitry Romanov Tested and alive. kittz
Wed, 28 Nov 2018 09:36:33 +0300 Dmitry Romanov Generalize TEXT of pressure unit kittz
Tue, 27 Nov 2018 18:31:21 +0100 heinrichsweikamp hPa instead of mbar, enabled Spanish language kittz
Tue, 27 Nov 2018 13:18:59 +0300 Dmitry Romanov globals kittz
Tue, 27 Nov 2018 12:59:56 +0300 Dmitry Romanov Stable.fix. kittz
Mon, 26 Nov 2018 15:25:52 +0300 Dmitry Romanov Config for debug data kittz
Mon, 26 Nov 2018 13:58:51 +0300 Dmitry Romanov +2ms delay kittz
Mon, 26 Nov 2018 13:49:02 +0300 Dmitry Romanov fix comments kittz
Mon, 26 Nov 2018 13:45:14 +0300 Dmitry Romanov Sorry. Now. kittz
Mon, 26 Nov 2018 13:42:38 +0300 Dmitry Romanov Debounce. Bounced buttons fixed. kittz
Mon, 26 Nov 2018 12:20:31 +0300 Dmitry Romanov reduce i2c speed and dutycycle for compass stability kittz
Mon, 26 Nov 2018 11:38:06 +0300 Dmitry Romanov a bit of kittz
Mon, 26 Nov 2018 10:50:39 +0300 Dmitry Romanov Stable to test. button sensitiveness fix. + global_constants. kittz
Mon, 26 Nov 2018 10:13:02 +0300 Dmitry Romanov First stable. With minimal button sensitivity fix(for broken buttons) kittz
Fri, 23 Nov 2018 18:14:56 +0300 Dmitry Romanov +- stable kittz
Fri, 23 Nov 2018 16:52:21 +0300 Dmitry Romanov temp! full cyclic SPI kittz
Thu, 22 Nov 2018 12:02:55 +0300 Dmitry Romanov revert kittz
Wed, 21 Nov 2018 13:57:58 +0300 Dmitry Romanov tmp kittz
Wed, 21 Nov 2018 13:12:44 +0300 Dmitry Romanov fix time&date after wakeup kittz
Wed, 21 Nov 2018 12:49:54 +0300 Dmitry Romanov increased interCPU baudrate, cpu2: i2c in SPI1 IRQ kittz
Wed, 21 Nov 2018 10:25:15 +0300 Dmitry Romanov Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!! kittz
Tue, 20 Nov 2018 12:27:40 +0300 Dmitry Romanov ??????? kittz
Tue, 20 Nov 2018 12:08:19 +0300 Dmitry Romanov +i2c analog noise filtering kittz
Tue, 20 Nov 2018 09:25:17 +0000 Dmitry Romanov Created new branch kittz kittz
Sat, 06 Oct 2018 15:02:11 +0200 heinrichsweikamp Added Spanish language
Thu, 04 Oct 2018 20:49:47 +0200 Ideenmodellierer Added Fontpack reference project
Thu, 04 Oct 2018 20:45:12 +0200 Ideenmodellierer Added script to pack FontPack
Thu, 04 Oct 2018 20:44:19 +0200 Ideenmodellierer Starting Firmware 1.4 the fontpack version 1.0 is needed
Thu, 04 Oct 2018 20:42:56 +0200 Ideenmodellierer Update Fontpack code to support font moved to upper memory
Thu, 04 Oct 2018 20:41:21 +0200 Ideenmodellierer Update version info
Thu, 04 Oct 2018 20:40:53 +0200 Ideenmodellierer Move font to upper memory
Thu, 04 Oct 2018 20:40:21 +0200 Ideenmodellierer Add definitions for Fonts to be placed in upper flash
Tue, 11 Sep 2018 22:16:05 +0200 heinrichsweikamp Merge
Wed, 05 Sep 2018 10:41:48 +0200 heinrichsweikamp remove wiki files from repo
Tue, 11 Sep 2018 19:29:58 +0200 heinrichsweikamp old (and new) compass support
Thu, 30 Aug 2018 21:48:21 +0200 heinrichsweikamp 1.3.8 forum release
Wed, 22 Aug 2018 18:54:01 +0200 Ideenmodellierer Update image size for 'F'ahrenheit
Wed, 22 Aug 2018 11:35:05 +0200 Ideenmodellierer Bugfix: FutureTTS and Fahrenheit not displayed correct
Wed, 15 Aug 2018 12:16:23 +0200 heinrichsweikamp language updates
Tue, 14 Aug 2018 13:53:43 +0200 heinrichsweikamp language updates
Tue, 14 Aug 2018 12:43:58 +0200 heinrichsweikamp typo in info menu...
Mon, 13 Aug 2018 19:11:14 +0200 Ideenmodellierer Replaced wait loop with delay fct
Sun, 12 Aug 2018 23:02:13 +0200 Ideenmodellierer Bugfix font elements (ue missing)
Sat, 11 Aug 2018 13:57:47 +0200 heinrichsweikamp rename update batch file
Fri, 10 Aug 2018 19:40:55 +0200 heinrichsweikamp more language updates
Fri, 10 Aug 2018 19:22:12 +0200 heinrichsweikamp language updates
Thu, 09 Aug 2018 22:39:15 +0200 Ideenmodellierer Added UTF8 decode function
Thu, 09 Aug 2018 22:38:56 +0200 Ideenmodellierer Resolve format warnings
Tue, 07 Aug 2018 17:03:36 +0200 heinrichsweikamp language updates
Tue, 07 Aug 2018 00:24:05 +0200 heinrichsweikamp Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
Sun, 05 Aug 2018 12:57:49 +0200 Ideenmodellierer Added missing ENTRY point
Sun, 05 Aug 2018 12:57:23 +0200 Ideenmodellierer Allow RTE binaries > 64k size
Sun, 05 Aug 2018 12:56:43 +0200 Ideenmodellierer Added reference projects
Tue, 31 Jul 2018 22:28:21 +0200 Ideenmodellierer Resolved warnings pointing to possible invalid memory access
Mon, 30 Jul 2018 11:37:39 +0200 heinrichsweikamp remove hgsub files
Mon, 30 Jul 2018 11:31:20 +0200 heinrichsweikamp add o4pack files
Sun, 29 Jul 2018 18:27:37 +0200 Ideenmodellierer Increased version number
Sun, 29 Jul 2018 18:16:01 +0200 Ideenmodellierer Added instruction to optimize for size
Sun, 29 Jul 2018 18:09:58 +0200 Ideenmodellierer Always include Fonts library (to have the adresses defined)
Sun, 29 Jul 2018 18:07:52 +0200 Ideenmodellierer Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
Sun, 29 Jul 2018 18:06:37 +0200 Ideenmodellierer Placed directory sections in firmware memory space
Sun, 29 Jul 2018 18:05:44 +0200 Ideenmodellierer Split memory areas and reverse engineered font library
Sun, 29 Jul 2018 16:46:31 +0200 Ideenmodellierer Force reset in case of a hard fault
Sun, 29 Jul 2018 16:45:37 +0200 Ideenmodellierer Non functional change just to use same symbols as CPU1
Sun, 29 Jul 2018 16:45:00 +0200 Ideenmodellierer Aligned structure with CPU1 linker file
Sun, 29 Jul 2018 16:17:25 +0200 Ideenmodellierer Increase version number
Sat, 28 Apr 2018 11:52:34 +0200 heinrichsweikamp include in ostc4 repository
Sat, 28 Apr 2018 11:48:39 +0200 heinrichsweikamp init
Sat, 28 Apr 2018 11:33:57 +0200 heinrichsweikamp Update author name for release
Wed, 07 Mar 2018 18:56:48 +0100 jDG ... more GPL License and general cleanups
Wed, 07 Mar 2018 17:35:35 +0100 jDG ... OpenOCD scripts to dump firmwares (not working)
Tue, 27 Feb 2018 13:57:30 +0100 jDG ... minor warnings
Sat, 10 Feb 2018 11:25:13 +0100 heinrichsweikamp change author name to heinrichs weikamp gmbh
Tue, 06 Feb 2018 16:13:30 +0100 jDG [ADD]Discovery/Src licences, plus reindentation
Tue, 23 Jan 2018 17:29:40 +0100 jDG ADD GPL License ...
Tue, 23 Jan 2018 13:36:25 +0100 jDG ADD script to set GPL headers
less more | rev 268: (0) -240 +240 tip