| Wed, 11 Sep 2024 22:32:05 +0200 |
Ideenmodellierer |
Reenabled fast communication:
Evo_2_23
|
| Tue, 10 Sep 2024 21:18:36 +0200 |
ideenmodellierer |
Smal modification slow exit counter:
Evo_2_23
|
| Tue, 10 Sep 2024 21:16:32 +0200 |
ideenmodellierer |
Added hysteresis for ascent speed coloring:
Evo_2_23
|
| Fri, 06 Sep 2024 18:43:30 +0200 |
heinrichsweikamp |
cleanup and disable function for GNSS uart and DMA
Evo_2_23
|
| Fri, 06 Sep 2024 16:46:22 +0200 |
heinrichsweikamp |
GNSS work in progress
Evo_2_23
|
| Tue, 03 Sep 2024 20:46:42 +0200 |
Ideenmodellierer |
Dev bugfix: Consider decogas in planner independen from calculation setting:
Evo_2_23
|
| Tue, 03 Sep 2024 15:30:53 +0200 |
heinrichsweikamp |
adding GNSS code
Evo_2_23
|
| Sun, 01 Sep 2024 21:38:06 +0200 |
Ideenmodellierer |
Improve communication stability:
Evo_2_23
|
| Sun, 01 Sep 2024 21:35:50 +0200 |
Ideenmodellierer |
Replaced global hardwareDisplay with unit access:
Evo_2_23
|
| Sun, 01 Sep 2024 20:31:01 +0200 |
Ideenmodellierer |
Minor screen cleanup:
Evo_2_23
|
| Sat, 31 Aug 2024 18:14:40 +0200 |
Ideenmodellierer |
Added compile switch for predive check menu:
Evo_2_23
|
| Sat, 31 Aug 2024 17:35:52 +0200 |
Ideenmodellierer |
Added slow exit timer function:
Evo_2_23
|
| Sat, 31 Aug 2024 17:28:37 +0200 |
Ideenmodellierer |
Added filtering of ascent speed:
Evo_2_23
|
| Thu, 29 Aug 2024 15:01:30 +0200 |
heinrichsweikamp |
support for led and vibration
Evo_2_23
|
| Thu, 29 Aug 2024 12:03:10 +0200 |
heinrichsweikamp |
new bluetooth work, bootloader work
Evo_2_23
|
| Sun, 25 Aug 2024 18:55:43 +0200 |
heinrichsweikamp |
brightness settings and proper power down for new screen
Evo_2_23
|
| Tue, 20 Aug 2024 15:18:43 +0200 |
Ideenmodellierer |
DevBugfix: Exit condition deco_stop_depth
Evo_2_23
|
| Fri, 16 Aug 2024 16:17:51 +0200 |
heinrichsweikamp |
Minor: Enable CO2-Sensor as default now
Evo_2_23
|
| Thu, 15 Aug 2024 20:44:35 +0200 |
Ideenmodellierer |
DevBugfix: Added missing default language value
Evo_2_23
|
| Wed, 14 Aug 2024 16:50:55 +0200 |
heinrichsweikamp |
minor
Evo_2_23
|
| Wed, 14 Aug 2024 16:44:46 +0200 |
heinrichsweikamp |
merge new screen stuff
Evo_2_23
|
| Wed, 14 Aug 2024 14:41:04 +0200 |
Ideenmodellierer |
Added first time initialization for new bluetooth module:
Evo_2_23
|
| Tue, 13 Aug 2024 13:24:54 +0200 |
heinrichsweikamp |
support for new screen
default
|
| Mon, 12 Aug 2024 22:25:46 +0200 |
Ideenmodellierer |
Instrument code for Bootloader:
Evo_2_23
|
| Mon, 12 Aug 2024 22:23:03 +0200 |
Ideenmodellierer |
Reactivate Bootloader:
Evo_2_23
|
| Mon, 12 Aug 2024 15:14:19 +0200 |
Ideenmodellierer |
Introduce speed dependend coloring of depth:
Evo_2_23
|
| Mon, 12 Aug 2024 14:30:22 +0200 |
Ideenmodellierer |
Decrease calculation interval for ascend speed:
Evo_2_23
|
| Mon, 22 Jul 2024 16:40:14 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
| Mon, 22 Jul 2024 16:39:48 +0200 |
heinrichsweikamp |
When opening the logbook, or scrolling inside a logbook page,
|
| Mon, 22 Jul 2024 16:38:36 +0200 |
heinrichsweikamp |
Fix incorrect logging of bailout to Open Circuit when using the best gas.
|
| Tue, 02 Jul 2024 20:05:08 +0200 |
Ideenmodellierer |
Bugfix empty line in deco plan (VPM only):
Evo_2_23
|
| Tue, 02 Jul 2024 19:24:03 +0200 |
Ideenmodellierer |
Only use deco gas for calculation if option is enabled:
Evo_2_23
|
| Tue, 07 May 2024 21:25:25 +0200 |
Ideenmodellierer |
Synchronize ADC and UART activities:
Evo_2_23
|
| Tue, 07 May 2024 21:20:56 +0200 |
Ideenmodellierer |
Code cleanup
Evo_2_23
|
| Tue, 07 May 2024 21:20:33 +0200 |
Ideenmodellierer |
Improvment battery charger visualization:
Evo_2_23
|
| Tue, 07 May 2024 21:12:37 +0200 |
Ideenmodellierer |
Bugfix initialisation of surface pressure:
Evo_2_23
|
| Sun, 05 May 2024 17:27:28 +0200 |
Ideenmodellierer |
Developer feature debug warning:
Evo_2_23
|
| Sun, 05 May 2024 17:20:56 +0200 |
Ideenmodellierer |
Do not show SP tab if PSCR mode is active:
Evo_2_23
|
| Mon, 18 Mar 2024 21:52:25 +0100 |
Ideenmodellierer |
Redefine Deco gas creation function:
Evo_2_23
|
| Sat, 09 Mar 2024 20:05:33 +0100 |
Ideenmodellierer |
Development bugfix menu id handling:
Evo_2_23
|
| Thu, 07 Mar 2024 21:51:18 +0100 |
Ideenmodellierer |
Potential Bugfix Selection MenuEdit lifecycle:
Evo_2_23
|
| Thu, 07 Mar 2024 21:46:49 +0100 |
Ideenmodellierer |
Bugfix Selection of custom views:
Evo_2_23
|
| Thu, 07 Mar 2024 21:42:23 +0100 |
Ideenmodellierer |
Added line checks for System Menu:
Evo_2_23
|
| Fri, 01 Mar 2024 19:30:29 +0100 |
Ideenmodellierer |
Check line enable/disable state when a new page is selected:
Evo_2_23
|
| Thu, 29 Feb 2024 18:49:55 +0100 |
Ideenmodellierer |
Consider flipped screen for Predive menu:
Evo_2_23
|
| Thu, 15 Feb 2024 21:26:28 +0100 |
Ideenmodellierer |
Bugfix tInfo_write_content_simple flip:
Evo_2_23
|
| Tue, 13 Feb 2024 17:30:24 +0100 |
heinrichsweikamp |
Minor: Remove absolute paths from the reference project files
|
| Sun, 21 Jan 2024 22:26:37 +0100 |
Ideenmodellierer |
Consider pressure offset compensation in case of setting a default value:
Evo_2_23
|
| Sun, 21 Jan 2024 22:24:36 +0100 |
Ideenmodellierer |
Added new PreDiveCheck info page:
Evo_2_23
|
| Sun, 21 Jan 2024 22:18:51 +0100 |
Ideenmodellierer |
Added option to adjust pressure to diveO2 reference:
Evo_2_23
|
| Sat, 20 Jan 2024 19:38:52 +0100 |
Ideenmodellierer |
Update version number and set beta state
Evo_2_23
|
| Mon, 15 Jan 2024 21:44:18 +0100 |
Ideenmodellierer |
Migrated Sentinel protocol to new UART structure:
Evo_2_23
|
| Sun, 07 Jan 2024 21:25:34 +0100 |
Ideenmodellierer |
Added autofocus for T3_DecoTTS view:
Evo_2_23
|
| Sun, 07 Jan 2024 21:21:58 +0100 |
Ideenmodellierer |
Development bugfix CO2 LLC:
Evo_2_23
|
| Sun, 07 Jan 2024 21:20:15 +0100 |
Ideenmodellierer |
Code cleanup: UART protocol definitions
Evo_2_23
|
| Fri, 05 Jan 2024 16:01:22 +0100 |
Ideenmodellierer |
Added T3 autofocus for Gas list:
Evo_2_23
|
| Wed, 27 Dec 2023 19:37:17 +0100 |
ideenmodellierer |
Bugfixes and code cleanup for BF views:
Evo_2_23
|
| Wed, 27 Dec 2023 19:24:44 +0100 |
ideenmodellierer |
Bugfix BF temperatur display and cv switching:
Evo_2_23
|
| Sun, 17 Dec 2023 21:49:02 +0100 |
Ideenmodellierer |
Added autofocus for BF Navigation view:
Evo_2_23
|
| Sun, 17 Dec 2023 21:14:17 +0100 |
Ideenmodellierer |
Added event based display changes for big font view:
Evo_2_23
|
| Sun, 17 Dec 2023 21:10:04 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
| Thu, 16 Nov 2023 20:37:20 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
| Thu, 16 Nov 2023 20:36:35 +0100 |
Ideenmodellierer |
Activated work gas for (p)scr mode:
Evo_2_23
|
| Thu, 16 Nov 2023 20:32:09 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not:
Evo_2_23
|
| Thu, 16 Nov 2023 20:25:01 +0100 |
Ideenmodellierer |
Changes wording from travel gas to work gas to use same wording as for other OSTCs
Evo_2_23
|
| Sun, 05 Nov 2023 20:21:42 +0100 |
Ideenmodellierer |
Added CO2 display to T3 Bigfont view:
Evo_2_23
|
| Sun, 05 Nov 2023 20:19:08 +0100 |
Ideenmodellierer |
Moved CO2 Menu from Xtra to Hardware:
Evo_2_23
|
| Wed, 11 Oct 2023 17:49:19 +0200 |
Ideenmodellierer |
Bugfix Line order of info screen with flip screen active:
Evo_2_23
|
| Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
|
| Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
Evo_2_23
|
| Mon, 09 Oct 2023 15:10:10 +0200 |
Ideenmodellierer |
Starting 'Evo_2_23' branch
Evo_2_23
|
| Mon, 09 Oct 2023 11:23:27 +0200 |
heinrichsweikamp |
User Test
|
| Mon, 25 Sep 2023 10:56:32 +0200 |
heinrichsweikamp |
1.6.5 release
|
| Sun, 24 Sep 2023 18:43:12 +0200 |
Ideenmodellierer |
Split definition of custom views:
|
| Sun, 24 Sep 2023 18:39:26 +0200 |
Ideenmodellierer |
Added debug information in case an error in the settings has been detected:
|
| Thu, 14 Sep 2023 13:24:30 +0200 |
heinrichsweikamp |
1.6.4 release
|
| Tue, 12 Sep 2023 12:02:49 +0200 |
heinrichsweikamp |
Testing build
|
| Sun, 10 Sep 2023 11:46:45 +0200 |
heinrichsweikamp |
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
|
| Sun, 03 Sep 2023 18:03:49 +0200 |
Ideenmodellierer |
Bugfix CustomView selection during dive mode:
|
| Sun, 03 Sep 2023 17:58:12 +0200 |
Ideenmodellierer |
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
|
| Sun, 03 Sep 2023 17:53:07 +0200 |
Ideenmodellierer |
Used real sensor state in simulation:
|
| Thu, 31 Aug 2023 10:33:25 +0200 |
heinrichsweikamp |
Testing build
|
| Sun, 27 Aug 2023 20:59:12 +0200 |
Ideenmodellierer |
Added function to skip lines which are not needed for operation:
|
| Sun, 27 Aug 2023 20:55:57 +0200 |
Ideenmodellierer |
Only jump to Sensor view during charging if sensors are connected:
|
| Sun, 27 Aug 2023 20:51:13 +0200 |
Ideenmodellierer |
DevBugfix CO2 sensor in streaming mode:
|
| Sat, 26 Aug 2023 13:38:13 +0200 |
heinrichsweikamp |
Testing build
|
| Sat, 26 Aug 2023 13:37:06 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
| Sat, 26 Aug 2023 13:35:15 +0200 |
heinrichsweikamp |
Update Firmware version number
|
| Mon, 21 Aug 2023 17:20:07 +0200 |
heinrichsweikamp |
Adds a simple countdown timer, available as a custom view in surface and dive mode.
|
| Thu, 10 Aug 2023 21:35:34 +0200 |
Ideenmodellierer |
Cleanup initialisation code:
|
| Thu, 10 Aug 2023 21:30:24 +0200 |
Ideenmodellierer |
Cleanup initialisation / deinitialization:
|
| Thu, 10 Aug 2023 21:27:58 +0200 |
Ideenmodellierer |
Removed dependency to protocol setting:
|
| Thu, 10 Aug 2023 21:24:04 +0200 |
Ideenmodellierer |
Update RTE version number
|
| Tue, 08 Aug 2023 17:29:03 +0200 |
Ideenmodellierer |
Cleanup warnings
|
| Mon, 07 Aug 2023 20:32:42 +0200 |
Ideenmodellierer |
Added CO2 mirrow instance:
|
| Mon, 07 Aug 2023 20:29:44 +0200 |
Ideenmodellierer |
Migrated CO2 protocol implementation to new format:
|
| Mon, 31 Jul 2023 20:10:27 +0200 |
Ideenmodellierer |
Use mirror sensortype for visualization:
|
| Mon, 31 Jul 2023 20:00:06 +0200 |
Ideenmodellierer |
Expanded Sensor map structure:
|
| Mon, 31 Jul 2023 19:50:36 +0200 |
Ideenmodellierer |
Moved DiveO2 sensor specific funtionality into separated file:
|
| Mon, 31 Jul 2023 19:46:29 +0200 |
Ideenmodellierer |
Restructure UART based sensor handling:
|
| Thu, 27 Jul 2023 21:52:19 +0200 |
Ideenmodellierer |
Bugfix PSCR Settings in Simulator Mode:
|
| Sat, 05 Aug 2023 11:52:08 +0200 |
heinrichsweikamp |
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
|
| Wed, 02 Aug 2023 08:41:03 +0200 |
heinrichsweikamp |
update current build for testing
|
| Tue, 25 Jul 2023 14:48:58 +0200 |
heinrichsweikamp |
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
|
| Wed, 12 Jul 2023 10:13:25 +0200 |
heinrichsweikamp |
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
|
| Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
| Sun, 04 Jun 2023 21:59:26 +0200 |
Ideenmodellierer |
Dev Bugfx Empty buffer indication and stability improvments:
|
| Sun, 04 Jun 2023 21:54:24 +0200 |
Ideenmodellierer |
Cleanup sensor data interface:
|
| Wed, 31 May 2023 08:44:07 +0200 |
heinrichsweikamp |
Change support from Pyroscience -> DiveO2 sensors
|
| Tue, 30 May 2023 18:44:20 +0200 |
Ideenmodellierer |
Bugfixloop UART multiplexer integration:
|
| Mon, 29 May 2023 20:26:38 +0200 |
Ideenmodellierer |
Update digital O2 sensor information:
|
| Mon, 29 May 2023 20:22:15 +0200 |
Ideenmodellierer |
Sensor status support for multiplexed DiveO2 sensors:
|
| Mon, 29 May 2023 18:26:55 +0200 |
Ideenmodellierer |
Update real multiplexer implementation:
|
| Tue, 23 May 2023 21:50:19 +0200 |
Ideenmodellierer |
Discovery<=>SmallCPU inferface update:
|
| Tue, 23 May 2023 21:45:34 +0200 |
Ideenmodellierer |
Added UART multiplexer support for DiveO2:
|
| Mon, 22 May 2023 09:15:09 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
| Mon, 22 May 2023 09:14:27 +0200 |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Thu, 11 May 2023 12:13:03 +0200 |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
| Wed, 10 May 2023 16:25:39 +0200 |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
| Wed, 10 May 2023 16:24:57 +0200 |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
| Sat, 22 Apr 2023 21:11:50 -0500 |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
| Fri, 21 Apr 2023 09:48:23 +0200 |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
| Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| Fri, 21 Apr 2023 09:47:06 +0200 |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
| Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
| Wed, 12 Apr 2023 09:56:00 +0200 |
heinrichsweikamp |
Update build for testing
|
| Wed, 12 Apr 2023 09:30:15 +0200 |
heinrichsweikamp |
change button default responsiveness to 100
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Mon, 27 Mar 2023 10:04:53 +0200 |
heinrichsweikamp |
Update build for testing
|
| Sun, 26 Mar 2023 18:34:30 +0200 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
| Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| Tue, 21 Mar 2023 12:56:54 +0100 |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
| Fri, 17 Mar 2023 09:35:25 +0100 |
heinrichsweikamp |
Some compass improvements from mikeller
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Tue, 07 Mar 2023 22:14:20 +0100 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
| Tue, 07 Mar 2023 20:02:05 +0100 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
| Tue, 07 Mar 2023 19:59:02 +0100 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
| Tue, 07 Mar 2023 19:55:13 +0100 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
| Tue, 07 Mar 2023 19:52:18 +0100 |
Ideenmodellierer |
Updated outdated comment
|
| Tue, 07 Mar 2023 19:51:30 +0100 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
| Mon, 13 Mar 2023 22:23:00 +0100 |
Ideenmodellierer |
resolv merge
|
| Sun, 05 Mar 2023 22:17:32 +0100 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
| Mon, 13 Mar 2023 22:18:28 +0100 |
Ideenmodellierer |
Added enum for Co2 display
|
| Sun, 05 Mar 2023 22:14:53 +0100 |
Ideenmodellierer |
Added display of co2 ppm values:
|
| Sun, 05 Mar 2023 22:06:47 +0100 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
| Tue, 21 Feb 2023 21:19:31 +0100 |
Ideenmodellierer |
Code cleanup sensors under development:
|
| Sun, 19 Feb 2023 21:52:02 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
| Sun, 19 Feb 2023 21:51:19 +0100 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
| Sun, 19 Feb 2023 21:48:47 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| Sun, 19 Feb 2023 21:43:24 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
| Thu, 02 Feb 2023 17:35:54 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Thu, 02 Feb 2023 17:26:54 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| Thu, 02 Feb 2023 17:19:24 +0100 |
Ideenmodellierer |
Added data init function for external interface:
|
| Mon, 06 Mar 2023 16:03:00 +0100 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
| Fri, 03 Mar 2023 10:41:44 +0100 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
| Tue, 14 Feb 2023 10:21:56 +0100 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
| Sun, 15 Jan 2023 21:51:54 +0100 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
| Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
| Sun, 15 Jan 2023 21:45:14 +0100 |
Ideenmodellierer |
Fix compiler switch:
|
| Sun, 15 Jan 2023 21:43:33 +0100 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
| Sat, 14 Jan 2023 20:49:40 +0100 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
| Sat, 14 Jan 2023 20:46:17 +0100 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
| Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| Sat, 14 Jan 2023 20:37:20 +0100 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
| Sat, 14 Jan 2023 20:35:40 +0100 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
| Sat, 07 Jan 2023 18:11:52 +0100 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
| Thu, 05 Jan 2023 18:30:06 +0100 |
Ideenmodellierer |
Development feature: external pressure sensor
|
| Thu, 05 Jan 2023 18:27:04 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
| Thu, 05 Jan 2023 18:25:47 +0100 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
| Thu, 05 Jan 2023 18:22:21 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
| Tue, 03 Jan 2023 19:47:12 +0100 |
Ideenmodellierer |
Bugfix set date (year):
|
| Sun, 27 Nov 2022 15:18:00 +0100 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
| Sun, 20 Nov 2022 20:49:41 +0100 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
| Sun, 20 Nov 2022 20:46:10 +0100 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
| Sun, 20 Nov 2022 20:43:04 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Sun, 20 Nov 2022 20:42:08 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| Sun, 20 Nov 2022 20:37:44 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Sun, 20 Nov 2022 20:36:34 +0100 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
| Tue, 08 Nov 2022 22:16:56 +0100 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Tue, 08 Nov 2022 21:13:14 +0100 |
Ideenmodellierer |
Bugfix compass bearing:
|
| Thu, 03 Nov 2022 20:44:51 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| Thu, 03 Nov 2022 20:44:21 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
| Thu, 03 Nov 2022 20:37:06 +0100 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
| Tue, 01 Nov 2022 09:55:45 +0100 |
Ideenmodellierer |
Bugfix release frame:
|
| Fri, 28 Oct 2022 20:49:21 +0200 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
| Fri, 28 Oct 2022 20:32:24 +0200 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
| Fri, 28 Oct 2022 20:29:37 +0200 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
| Fri, 28 Oct 2022 19:39:20 +0200 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
| Tue, 18 Oct 2022 21:21:32 +0200 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
| Tue, 18 Oct 2022 20:56:19 +0200 |
Ideenmodellierer |
Cleanup warnings:
|
| Sun, 25 Sep 2022 21:13:45 +0200 |
Ideenmodellierer |
Bugfix Empty menu:
|
| Sun, 25 Sep 2022 21:09:18 +0200 |
Ideenmodellierer |
Improvment key event detection:
|
| Fri, 19 Aug 2022 11:30:24 +0200 |
heinrichsweikamp |
Merge
|
| Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
| Sat, 06 Aug 2022 11:10:56 +0200 |
heinrichsweikamp |
Update current build for testing
Betatest
|
| Fri, 05 Aug 2022 16:04:52 +0200 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
| Fri, 05 Aug 2022 15:27:01 +0200 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
| Fri, 05 Aug 2022 15:26:28 +0200 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
| Fri, 05 Aug 2022 15:22:26 +0200 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
| Fri, 05 Aug 2022 15:15:01 +0200 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
| Fri, 05 Aug 2022 15:13:29 +0200 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
| Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
| Fri, 05 Aug 2022 14:56:17 +0200 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
| Wed, 03 Aug 2022 18:19:03 +0200 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
| Thu, 02 Jun 2022 20:24:59 +0200 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
| Mon, 16 May 2022 20:50:26 +0200 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
| Mon, 25 Apr 2022 21:15:01 +0200 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
| Mon, 25 Apr 2022 21:10:10 +0200 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
| Mon, 25 Apr 2022 21:07:28 +0200 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
| Fri, 22 Apr 2022 18:24:43 +0200 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
| Thu, 21 Apr 2022 21:02:50 +0200 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
| Wed, 20 Apr 2022 20:25:04 +0200 |
Jan Mulder |
Move include file to common to ...
Betatest
|
| Mon, 22 Nov 2021 19:39:11 +0100 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
| Wed, 30 Mar 2022 18:07:21 +0200 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
| Wed, 30 Mar 2022 18:01:29 +0200 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
| Wed, 30 Mar 2022 18:00:21 +0200 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
| Sat, 12 Mar 2022 23:01:11 +0100 |
Ideenmodellierer |
Added Charging view:
Betatest
|
| Sat, 12 Mar 2022 22:58:22 +0100 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
| Sat, 12 Mar 2022 22:54:26 +0100 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
| Sat, 12 Mar 2022 22:49:09 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| Sat, 12 Mar 2022 22:48:45 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
| Sat, 12 Mar 2022 22:42:56 +0100 |
Ideenmodellierer |
Increased version number
Betatest
|
| Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
| Fri, 24 Dec 2021 13:40:47 +0100 |
heinrichsweikamp |
update test build
Betatest
|
| Tue, 21 Dec 2021 19:36:41 +0100 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
| Tue, 21 Dec 2021 19:32:29 +0100 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Mon, 01 Nov 2021 12:39:34 +0100 |
heinrichs weikamp |
Undo Rev. 660
|
| Sun, 08 Aug 2021 09:36:23 +0200 |
heinrichsweikamp |
Add option to reset bluetooth name
|
| Wed, 28 Apr 2021 09:47:25 +0200 |
heinrichs weikamp |
Update build file for testing
|
| Tue, 27 Apr 2021 21:29:26 +0200 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
| Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
| Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
| Sun, 25 Apr 2021 20:42:56 +0200 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
