log

age author description
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:35:40 +0100 Ideenmodellierer Bugfix data synchronization after RTE start:
Sat, 07 Jan 2023 18:11:52 +0100 Ideenmodellierer Update CO2 sensor implementation:
Thu, 05 Jan 2023 18:30:06 +0100 Ideenmodellierer Development feature: external pressure sensor
Thu, 05 Jan 2023 18:27:04 +0100 Ideenmodellierer DigO2 added raw data request:
Thu, 05 Jan 2023 18:25:47 +0100 Ideenmodellierer Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:22:21 +0100 Ideenmodellierer DigO2 added raw data request:
Tue, 03 Jan 2023 19:47:12 +0100 Ideenmodellierer Bugfix set date (year):
Sun, 27 Nov 2022 15:18:00 +0100 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 20 Nov 2022 20:49:41 +0100 Ideenmodellierer Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:46:10 +0100 Ideenmodellierer Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:43:04 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:33 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:42:08 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:37:44 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:36:34 +0100 Ideenmodellierer Bugfix PSCR menu button label:
Tue, 08 Nov 2022 22:16:56 +0100 Ideenmodellierer Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 21:16:17 +0100 Ideenmodellierer Extension scrubber time:
Tue, 08 Nov 2022 21:13:14 +0100 Ideenmodellierer Bugfix compass bearing:
Thu, 03 Nov 2022 20:44:51 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:37:06 +0100 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
Tue, 01 Nov 2022 09:55:45 +0100 Ideenmodellierer Bugfix release frame:
Fri, 28 Oct 2022 20:49:21 +0200 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:32:24 +0200 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:29:37 +0200 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 19:39:20 +0200 Ideenmodellierer Bugfix display of deactivated sensors:
Tue, 18 Oct 2022 21:21:32 +0200 Ideenmodellierer Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 20:56:19 +0200 Ideenmodellierer Cleanup warnings:
Sun, 25 Sep 2022 21:13:45 +0200 Ideenmodellierer Bugfix Empty menu:
Sun, 25 Sep 2022 21:09:18 +0200 Ideenmodellierer Improvment key event detection:
Fri, 19 Aug 2022 11:30:24 +0200 heinrichsweikamp Merge
Fri, 19 Aug 2022 11:27:44 +0200 heinrichsweikamp 1.6.0 release Betatest
Sat, 06 Aug 2022 11:10:56 +0200 heinrichsweikamp Update current build for testing Betatest
Fri, 05 Aug 2022 16:04:52 +0200 Ideenmodellierer Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 15:27:01 +0200 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:26:28 +0200 Ideenmodellierer Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:22:26 +0200 Ideenmodellierer Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:15:01 +0200 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:13:29 +0200 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:10:10 +0200 Ideenmodellierer Increased version numbers: Betatest
Fri, 05 Aug 2022 14:56:17 +0200 Ideenmodellierer Bugfix Battery charge complete event: Betatest
Wed, 03 Aug 2022 18:19:03 +0200 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
Thu, 02 Jun 2022 20:24:59 +0200 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
Mon, 16 May 2022 20:50:26 +0200 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 25 Apr 2022 21:15:01 +0200 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:10:10 +0200 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:07:28 +0200 Ideenmodellierer Bugfix visualization better setpoint: Betatest
Fri, 22 Apr 2022 18:24:43 +0200 Jan Mulder cleanup: Use correct "per" symbol Betatest
Thu, 21 Apr 2022 21:02:50 +0200 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
Wed, 20 Apr 2022 20:25:04 +0200 Jan Mulder Move include file to common to ... Betatest
Mon, 22 Nov 2021 19:39:11 +0100 Jan Mulder Allow longer scrubber time Betatest
Wed, 30 Mar 2022 18:07:21 +0200 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:01:29 +0200 heinrichsweikamp Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:00:21 +0200 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
Sat, 12 Mar 2022 23:01:11 +0100 Ideenmodellierer Added Charging view: Betatest