| Wed, 28 Apr 2021 09:47:25 +0200 |
heinrichs weikamp |
Update build file for testing
|
| Tue, 27 Apr 2021 21:29:26 +0200 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
| Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
| Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
| Sun, 25 Apr 2021 20:42:56 +0200 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| Sun, 25 Apr 2021 20:36:18 +0200 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
| Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
| Mon, 19 Apr 2021 20:20:38 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
| Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
| Mon, 19 Apr 2021 20:16:24 +0200 |
Ideenmodellierer |
Bugfix consider checkbox in calculation of right aligned and centered position:
|
| Mon, 19 Apr 2021 20:14:20 +0200 |
Ideenmodellierer |
Motion detection: Enable focus after focus calibration:
|
| Tue, 13 Apr 2021 19:25:41 +0200 |
Ideenmodellierer |
Integrated selection of bailout in the diluent selection page:
|
| Tue, 13 Apr 2021 19:21:14 +0200 |
Ideenmodellierer |
Remove battery charge counter from information menu:
|
| Tue, 13 Apr 2021 19:18:32 +0200 |
Ideenmodellierer |
Small changes in charger state handling:
|
| Tue, 30 Mar 2021 10:34:12 +0200 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
| Wed, 24 Mar 2021 22:06:00 +0100 |
Ideenmodellierer |
Reimplemented charger status generation (deactivated):
|
| Wed, 24 Mar 2021 21:28:41 +0100 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
| Thu, 11 Mar 2021 21:45:22 +0100 |
Ideenmodellierer |
Development Bugfix Deco bars not shown after last deco stop passed:
|
| Thu, 11 Mar 2021 21:43:43 +0100 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
| Thu, 25 Feb 2021 12:20:43 +0100 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
| Wed, 24 Feb 2021 21:45:35 +0100 |
Ideenmodellierer |
Added last measured PPO2 value to sensor selection dialog:
|
| Wed, 24 Feb 2021 21:04:07 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
| Wed, 24 Feb 2021 21:03:54 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
| Wed, 24 Feb 2021 21:03:22 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
| Wed, 24 Feb 2021 19:18:26 +0100 |
Ideenmodellierer |
Enable sensor check for Analog PPO2 mode:
|
| Tue, 23 Feb 2021 21:58:18 +0100 |
Ideenmodellierer |
Added menu structure to allow ppo2 modification in simulator mode:
|
| Tue, 23 Feb 2021 21:55:52 +0100 |
Ideenmodellierer |
Warnings:
|
| Tue, 23 Feb 2021 21:55:26 +0100 |
Ideenmodellierer |
Warnings:
|
| Tue, 23 Feb 2021 21:54:56 +0100 |
Ideenmodellierer |
Warnings:
|
| Tue, 23 Feb 2021 21:53:24 +0100 |
Ideenmodellierer |
Added functionality to add ppo2 mV offset:
|
| Fri, 12 Feb 2021 21:46:36 +0100 |
Ideenmodellierer |
Added compile switch for T3_PROFILE menu operation option
|
| Fri, 12 Feb 2021 21:43:27 +0100 |
Ideenmodellierer |
Improve in / out of focus transitions:
|
| Fri, 12 Feb 2021 21:37:50 +0100 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
| Mon, 08 Feb 2021 21:35:46 +0100 |
Ideenmodellierer |
Switch Sector / Scroll detection to vector implementation:
|
| Sun, 07 Feb 2021 22:05:32 +0100 |
Ideenmodellierer |
Development bugfix: Marker in standard t3 view drawn in wrong direction
|
| Sun, 07 Feb 2021 22:04:43 +0100 |
Ideenmodellierer |
Improvment frame Handling:
|
| Wed, 03 Feb 2021 21:45:48 +0100 |
Ideenmodellierer |
Adjustments for flipped display view:
|
| Wed, 03 Feb 2021 21:44:22 +0100 |
Ideenmodellierer |
Use roll and pitch agles in 0-360 format:
|
| Wed, 27 Jan 2021 22:12:44 +0100 |
Ideenmodellierer |
Added minilog functions to allow marker synchronisation:
|
| Wed, 27 Jan 2021 22:10:11 +0100 |
Ideenmodellierer |
Added t3 quick menu for marker synchronisation:
|
| Wed, 27 Jan 2021 22:04:45 +0100 |
Ideenmodellierer |
Development bugfix: focus state not remembered:
|
| Wed, 27 Jan 2021 22:03:11 +0100 |
Ideenmodellierer |
Development bugfix: Low battery warning was interpretated as marker:
|
| Wed, 27 Jan 2021 21:58:46 +0100 |
Ideenmodellierer |
Development bugfix: show replay symbol only for the selected dive:
|
| Wed, 27 Jan 2021 21:56:48 +0100 |
Ideenmodellierer |
Moved non critical functions from timer interrupt to main loop:
|
| Wed, 20 Jan 2021 20:05:05 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
| Fri, 15 Jan 2021 21:33:07 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
| Fri, 15 Jan 2021 21:20:29 +0100 |
Ideenmodellierer |
Bugfix inverted whitspace:
|
| Thu, 14 Jan 2021 21:25:15 +0100 |
Ideenmodellierer |
Suspend MotionDetection events while diver is operationg the OSTC:
|
| Thu, 14 Jan 2021 20:38:28 +0100 |
Ideenmodellierer |
Added access to logbook marker data:
|
| Thu, 14 Jan 2021 19:17:28 +0100 |
Ideenmodellierer |
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
|
| Fri, 05 Feb 2021 14:53:50 +0100 |
heinrichsweikamp |
Update RTE required value for release
|
| Fri, 05 Feb 2021 14:50:18 +0100 |
heinrichsweikamp |
Added tag v1.5.6 release for changeset 06ec1da5e105
|
| Fri, 05 Feb 2021 14:50:05 +0100 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
| Thu, 07 Jan 2021 09:53:04 +0100 |
heinrichsweikamp |
change O2_CALIB_FRACTION_O2 to 0.98
|
| Wed, 06 Jan 2021 21:01:00 +0100 |
Ideenmodellierer |
Merged menu items of viewport and motion control:
|
| Wed, 06 Jan 2021 19:41:43 +0100 |
Ideenmodellierer |
T3 profile view: Added visualization of deco data
|
| Tue, 05 Jan 2021 20:35:01 +0100 |
Ideenmodellierer |
Added replay data scaling in case life data is longer than replay block
|
| Mon, 04 Jan 2021 22:49:07 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
| Mon, 04 Jan 2021 22:45:37 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
| Mon, 04 Jan 2021 21:48:31 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
| Mon, 04 Jan 2021 21:41:51 +0100 |
Ideenmodellierer |
New replay block for T3 profile:
|
| Mon, 04 Jan 2021 21:38:28 +0100 |
Ideenmodellierer |
MotionControl-Sector: Map sectors during switch T7 <=> T3:
|
| Mon, 04 Jan 2021 21:35:38 +0100 |
Ideenmodellierer |
Added functionality to select a dive to be shown in the T3 profile view:
|
| Mon, 04 Jan 2021 21:32:39 +0100 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
| Mon, 04 Jan 2021 21:30:04 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
| Mon, 04 Jan 2021 21:24:24 +0100 |
Ideenmodellierer |
Added PrintGraph option to skip invalid data entries:
|
| Sun, 03 Jan 2021 14:43:16 +0100 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
| Wed, 06 Jan 2021 22:02:49 +0100 |
heinrichsweikamp |
Minor: Comment translation into English
|
| Tue, 22 Dec 2020 22:23:11 +0100 |
Ideenmodellierer |
Align VPM tag in log list to be at same position as GF tag:
|
| Thu, 17 Dec 2020 10:58:28 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
| Thu, 17 Dec 2020 09:52:12 +0100 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
| Wed, 16 Dec 2020 09:43:11 +0100 |
heinrichsweikamp |
update ostc4pack sample files
|
| Sun, 13 Dec 2020 18:31:40 +0100 |
Ideenmodellierer |
Motion control: Jump back to primary view if focus is lost:
|
| Sun, 13 Dec 2020 18:29:12 +0100 |
Ideenmodellierer |
Reduced view angle and number of vusiualized custom views in setor mode:
|
| Sat, 12 Dec 2020 21:05:11 +0100 |
Ideenmodellierer |
Added option for 100% o2 calibration:
|
| Sat, 12 Dec 2020 20:54:31 +0100 |
Ideenmodellierer |
Solved minor warnings
|
| Sat, 12 Dec 2020 20:52:58 +0100 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
| Sat, 12 Dec 2020 19:18:57 +0100 |
Ideenmodellierer |
Added ex Interface measurement restart in case of i2c disturbance:
|
| Sat, 12 Dec 2020 19:16:37 +0100 |
Ideenmodellierer |
Bugfix bad resolution of compass LSM303AGR:
|
| Thu, 03 Dec 2020 13:17:32 +0100 |
heinrichsweikamp |
Minor: Functional inert cleanup of some unused variables
|
| Sun, 29 Nov 2020 23:02:11 +0100 |
Ideenmodellierer |
Rework pitch detection:
|
| Sun, 29 Nov 2020 22:58:11 +0100 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
| Sun, 29 Nov 2020 22:55:31 +0100 |
Ideenmodellierer |
Return to o2 values:
|
| Sun, 29 Nov 2020 22:53:33 +0100 |
Ideenmodellierer |
Change style of viewport calibration menu:
|
| Wed, 25 Nov 2020 20:26:01 +0100 |
Ideenmodellierer |
Improved focus detection:
|
| Wed, 25 Nov 2020 20:19:50 +0100 |
Ideenmodellierer |
Update String "Blickwinkel":
|
| Wed, 25 Nov 2020 20:18:22 +0100 |
Ideenmodellierer |
Added debug view to viewport calibration:
|
| Wed, 25 Nov 2020 20:16:20 +0100 |
Ideenmodellierer |
Reactivate compass parameter stored in NVM:
|
| Mon, 30 Nov 2020 20:55:23 +0100 |
Ideenmodellierer |
Try to reduce legth of log entry string:
|
| Mon, 30 Nov 2020 20:52:49 +0100 |
Ideenmodellierer |
Added new section "lower.font":
|
| Sun, 29 Nov 2020 11:41:03 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
| Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
| Sat, 21 Nov 2020 17:41:59 +0100 |
heinrichsweikamp |
add current build
|
| Sun, 15 Nov 2020 20:12:19 +0100 |
Ideenmodellierer |
Bugfix center / right alignment if dualfont is used:
|
| Sun, 15 Nov 2020 20:09:31 +0100 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
| Sun, 15 Nov 2020 20:01:56 +0100 |
Ideenmodellierer |
Refine o2 sensor diagnostic functions:
|
| Sun, 15 Nov 2020 19:58:14 +0100 |
Ideenmodellierer |
Added ADC sensor interface to O2 sensore menu structure:
|
| Sun, 15 Nov 2020 19:54:36 +0100 |
Ideenmodellierer |
Solved minor warnings
|
| Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
| Sun, 15 Nov 2020 19:52:03 +0100 |
Ideenmodellierer |
Check if HW evaluation was performed:
|
| Thu, 12 Nov 2020 20:06:04 +0100 |
Ideenmodellierer |
Changed operation mode of RecoverSampleIndex:
|
| Thu, 12 Nov 2020 20:03:00 +0100 |
Ideenmodellierer |
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
|
| Thu, 12 Nov 2020 19:54:58 +0100 |
Ideenmodellierer |
Switch source of o2 sensor data depending on availability of external ADC:
|
| Thu, 12 Nov 2020 19:48:28 +0100 |
Ideenmodellierer |
Added HW_Info to Discovery <=> RTE data exchange:
|
| Thu, 12 Nov 2020 19:46:03 +0100 |
Ideenmodellierer |
Added external ADC interface functionality (MCP3424):
|
| Sun, 08 Nov 2020 18:49:54 +0100 |
Ideenmodellierer |
Added color indicator for focus state:
|
| Sun, 08 Nov 2020 18:46:46 +0100 |
Ideenmodellierer |
Added menu structure to acces viewport calibration:
|
| Sun, 08 Nov 2020 18:43:19 +0100 |
Ideenmodellierer |
Added viewport functionality:
|
| Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
| Sun, 08 Nov 2020 18:36:02 +0100 |
Ideenmodellierer |
Only execute motion detection functions if features is enabled:
|
| Sun, 08 Nov 2020 16:38:43 +0100 |
Ideenmodellierer |
Update roll and pitch value in simulation mode:
|
| Mon, 02 Nov 2020 21:17:45 +0100 |
Ideenmodellierer |
Added viewport calibration to dive menu:
|
| Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
| Tue, 03 Nov 2020 12:47:51 +0100 |
heinrichsweikamp |
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
|
| Mon, 02 Nov 2020 12:13:02 +0100 |
heinrichsweikamp |
add current build
|
| Sun, 11 Oct 2020 18:33:19 +0200 |
Ideenmodellierer |
Shortend t3 view names:
|
| Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
| Sat, 10 Oct 2020 18:34:10 +0200 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
| Sat, 10 Oct 2020 18:30:13 +0200 |
Ideenmodellierer |
Bugfix return from submenu in t3 view:
|
| Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| Sat, 10 Oct 2020 13:51:44 +0200 |
Ideenmodellierer |
BugFix firmware downgrade to version with less settings:
|
| Wed, 07 Oct 2020 18:07:10 +0200 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
| Wed, 07 Oct 2020 17:15:27 +0200 |
Ideenmodellierer |
Changed visualization of Depth / temperatur / debugview entry
|
| Wed, 07 Oct 2020 17:12:44 +0200 |
Ideenmodellierer |
Increased max value for surface pressure:
|
| Sun, 04 Oct 2020 15:50:43 +0200 |
heinrichsweikamp |
Added tag 1.5.5 release for changeset 02e7e11fdbe8
|
| Fri, 25 Sep 2020 11:13:03 +0200 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
| Wed, 16 Sep 2020 10:52:57 +0200 |
heinrichsweikamp |
add current build
|
| Tue, 15 Sep 2020 20:57:04 +0200 |
Ideenmodellierer |
Bugfix custom view selection dialog:
|
| Tue, 15 Sep 2020 20:54:54 +0200 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
| Tue, 15 Sep 2020 20:52:39 +0200 |
Ideenmodellierer |
Added skip condition in custom view selection:
|
| Sun, 13 Sep 2020 20:59:38 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
| Sun, 13 Sep 2020 20:58:37 +0200 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
| Sun, 13 Sep 2020 20:55:54 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
| Sun, 13 Sep 2020 20:49:58 +0200 |
Ideenmodellierer |
Change color ID used in strings for light grey:
|
| Sun, 13 Sep 2020 20:44:50 +0200 |
Ideenmodellierer |
Minor: Removed duplicated definition of number of available gases
|
| Thu, 10 Sep 2020 20:52:47 +0200 |
Ideenmodellierer |
Changed string for data view selections:
|
| Thu, 10 Sep 2020 20:51:36 +0200 |
Ideenmodellierer |
Added compile switch for motion control:
|
| Thu, 10 Sep 2020 20:47:48 +0200 |
Ideenmodellierer |
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
|
| Tue, 08 Sep 2020 21:24:14 +0200 |
Ideenmodellierer |
Moved custom view menu to new tab:
|
| Sun, 06 Sep 2020 22:11:51 +0200 |
Ideenmodellierer |
Reset Safety Stop display in case of a new descend:
|
| Sun, 06 Sep 2020 21:17:59 +0200 |
Ideenmodellierer |
Added T3_gaslist:
|
| Sun, 06 Sep 2020 21:15:34 +0200 |
Ideenmodellierer |
Added color coding for cv gas list:
|
| Sun, 06 Sep 2020 21:13:22 +0200 |
Ideenmodellierer |
Added quick menu function to big font view:
|
| Sun, 06 Sep 2020 21:09:37 +0200 |
Ideenmodellierer |
Added missing display of button labels in refresh function:
|
| Wed, 16 Sep 2020 10:30:28 +0200 |
heinrichsweikamp |
Properly send compass 3 into sleepmode (end-2019 hardware)
|
| Mon, 31 Aug 2020 20:06:59 +0200 |
heinrichsweikamp |
Merge
|
| Sun, 30 Aug 2020 17:31:29 +0200 |
Ideenmodellierer |
Added new strings for the selection of T3 custom views
|
| Sun, 30 Aug 2020 17:30:54 +0200 |
Ideenmodellierer |
Minor adaptions in page layout:
|
| Sun, 30 Aug 2020 17:26:52 +0200 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
| Sun, 30 Aug 2020 17:26:00 +0200 |
Ideenmodellierer |
Show page number in small letters if more than 8 tabs are active
|
| Sun, 30 Aug 2020 17:23:44 +0200 |
Ideenmodellierer |
Reimplementation of tMenuEdit_select:
|
| Sun, 30 Aug 2020 17:20:16 +0200 |
Ideenmodellierer |
Added new menu tab into call structure
|
| Sun, 30 Aug 2020 17:19:23 +0200 |
Ideenmodellierer |
Added new top level menu for customization of views
|
| Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
| Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
| Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
| Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
| Mon, 24 Aug 2020 19:31:05 +0200 |
Ideenmodellierer |
Added compile switch to enable / disable new BigFont layout
|
| Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
| Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
| Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
| Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
| Thu, 20 Aug 2020 21:25:38 +0200 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
| Mon, 10 Aug 2020 15:53:45 +0200 |
heinrichsweikamp |
Added tag v1.5.4 release for changeset e9ca66ce36e5
|
| Wed, 22 Jul 2020 11:55:53 +0200 |
heinrichsweikamp |
1.5.4 release
v1.5.4 release
|
| Mon, 29 Jun 2020 16:18:17 +0200 |
heinrichsweikamp |
add wiki sub-directory
|
| Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
| Tue, 26 May 2020 19:27:07 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
|
| Tue, 26 May 2020 21:13:12 +0200 |
ideenmodellierer |
Bugfix header EEPROM layout:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:13:00 +0200 |
ideenmodellierer |
Bugfix right alignment of string:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:12:46 +0200 |
ideenmodellierer |
Small corrections layout Divelog page 1:
FixLayout_Header_LogView
|
| Tue, 26 May 2020 21:12:02 +0200 |
ideenmodellierer |
Development option only read bottledata:
FixLayout_Header_LogView
|
| Tue, 19 May 2020 07:27:18 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
|
| Mon, 18 May 2020 21:51:08 +0200 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
| Wed, 13 May 2020 21:56:35 +0200 |
ideenmodellierer |
Code cleanup pressure plausibility check:
Improve_Button_Sleep
|
| Wed, 13 May 2020 21:27:30 +0200 |
ideenmodellierer |
Bugfix unintended else condition:
Improve_Button_Sleep
|
| Tue, 12 May 2020 23:03:50 +0200 |
ideenmodellierer |
Development option only: Show Pressure update for a short time in the custom field (as warning)
Improve_Button_Sleep
|
| Tue, 12 May 2020 23:03:29 +0200 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:54:19 +0200 |
ideenmodellierer |
Balance value of button responsitivness were not considered during firmware startup:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:52:05 +0200 |
ideenmodellierer |
Changed default values:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:42:52 +0200 |
ideenmodellierer |
Added error detection for reading of ADC values in sleep mode:
Improve_Button_Sleep
|
| Tue, 12 May 2020 22:39:18 +0200 |
ideenmodellierer |
Do not signal power on reset in case of a "warm" reset:
Improve_Button_Sleep
|
| Tue, 28 Apr 2020 15:37:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
|
| Wed, 22 Apr 2020 13:08:57 +0200 |
Jan Mulder |
bugfix: implement battery charge percentage in dive header
fix-bat-2
|
| Wed, 15 Apr 2020 07:01:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
|
| Tue, 14 Apr 2020 19:45:34 +0200 |
ideenmodellierer |
Removed no longer needed reset profile function:
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:44:19 +0200 |
ideenmodellierer |
Moved and deactivated analyse sample buffer switch:
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:29:23 +0200 |
ideenmodellierer |
Cmd Get profile: transmit dummy profile if necessary
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:27:04 +0200 |
ideenmodellierer |
Removed invalidate header function because it is no lonnger needed
Improve_Logtansfer
|
| Tue, 14 Apr 2020 19:22:56 +0200 |
ideenmodellierer |
Compare profile length from header and sample data to identify valid profiles
Improve_Logtansfer
|
| Mon, 13 Apr 2020 16:00:54 +0200 |
ideenmodellierer |
Added compile switch to handle additional data during raw header request:
Improve_Logtansfer
|
| Sun, 12 Apr 2020 21:02:34 +0200 |
ideenmodellierer |
Added function to transfer sample buffer:
Improve_Logtansfer
|
| Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
| Mon, 30 Mar 2020 13:16:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
|
| Sun, 29 Mar 2020 21:55:00 +0200 |
Ideenmodellierer |
merged default into minor_improvments
minor_improvments
|
| Sun, 29 Mar 2020 21:39:57 +0200 |
ideenmodellierer |
Activated reset of sample information within header data at time of sector erasing:
minor_improvments
|
| Sat, 28 Mar 2020 21:41:47 +0100 |
ideenmodellierer |
Added ppO2 to dummy profile data:
minor_improvments
|
| Tue, 24 Mar 2020 22:32:48 +0100 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
| Tue, 24 Mar 2020 22:14:16 +0100 |
ideenmodellierer |
Transfer a dummy profile in case of missing sample information:
minor_improvments
|
| Tue, 24 Mar 2020 22:12:08 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
| Tue, 24 Mar 2020 22:08:29 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
| Tue, 24 Mar 2020 21:59:38 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
| Tue, 24 Mar 2020 21:59:11 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
| Tue, 24 Mar 2020 21:49:52 +0100 |
ideenmodellierer |
Allocate received bar value to active gas (was static allocated to gas[1])
minor_improvments
|
| Tue, 24 Mar 2020 21:48:27 +0100 |
ideenmodellierer |
Added new compile switches for variants:
minor_improvments
|
| Mon, 23 Mar 2020 21:14:54 +0100 |
ideenmodellierer |
Added initialization of bottle sensor data age counter
minor_improvments
|
| Mon, 23 Mar 2020 21:13:52 +0100 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
| Mon, 23 Mar 2020 21:10:02 +0100 |
ideenmodellierer |
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
minor_improvments
|
| Thu, 05 Mar 2020 22:31:50 +0100 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
| Thu, 05 Mar 2020 22:27:55 +0100 |
ideenmodellierer |
Removed duplicated definition:
minor_improvments
|
| Sat, 29 Feb 2020 22:27:29 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sat, 29 Feb 2020 22:25:20 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Sun, 01 Mar 2020 10:06:45 +0100 |
heinrichsweikamp |
fix potential issue with >255 dives in the logbook
|
| Thu, 27 Feb 2020 09:13:25 +0100 |
heinrichsweikamp |
Added tag v1.5.3 release for changeset 5b4c78c36b04
|
| Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
| Mon, 24 Feb 2020 15:17:54 +0100 |
heinrichsweikamp |
update the 1.5.3 for tests
|
| Mon, 24 Feb 2020 07:58:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
|
| Sun, 23 Feb 2020 21:18:49 +0100 |
ideenmodellierer |
Moved power on detection to RTE:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:17:17 +0100 |
ideenmodellierer |
Bugfix display battery voltage in maintainance menu:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:13:28 +0100 |
ideenmodellierer |
Reduced timeout for common UART communication:
Improve_BatteryGasGauge
|
| Sun, 23 Feb 2020 21:09:56 +0100 |
ideenmodellierer |
Detect startup after power off:
Improve_BatteryGasGauge
|
| Tue, 18 Feb 2020 12:41:45 +0100 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
| Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
| Tue, 18 Feb 2020 07:20:29 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
|
| Mon, 17 Feb 2020 19:43:09 +0100 |
ideenmodellierer |
Marked possible code improvment for future activities:
ImprovmentNVM_2
|
| Mon, 17 Feb 2020 19:04:10 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
| Sun, 16 Feb 2020 22:04:52 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:50:58 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:50:20 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
| Sat, 15 Feb 2020 20:45:19 +0100 |
ideenmodellierer |
Added (optional) menu item to analyse log sample buffer:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:40:33 +0100 |
ideenmodellierer |
ext_Flash_write_sample erase sector optimization:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:29:12 +0100 |
ideenmodellierer |
Moved Timeout handling out of 100ms callback:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:25:09 +0100 |
ideenmodellierer |
Enable sequentionel writing of device data:
ImprovmentNVM_2
|
| Mon, 10 Feb 2020 19:15:27 +0100 |
ideenmodellierer |
Optimize ef_write_block function:
ImprovmentNVM_2
|
