Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 942: (0) -240 tip
age author description
Mon, 16 Dec 2024 19:09:00 +0100 Ideenmodellierer Power down gnss module during dive: Evo_2_23
Mon, 16 Dec 2024 19:06:37 +0100 Ideenmodellierer Added gnss to logbook data: Evo_2_23
Thu, 12 Dec 2024 21:12:07 +0100 Ideenmodellierer GNSS improvments: Evo_2_23
Tue, 10 Dec 2024 21:03:04 +0100 Ideenmodellierer Resume UART com with gnss after sleep: Evo_2_23
Tue, 10 Dec 2024 21:00:55 +0100 Ideenmodellierer Update GPIO: Evo_2_23
Tue, 10 Dec 2024 20:59:37 +0100 Ideenmodellierer Compile switch for RTE sleep debug: Evo_2_23
Sun, 08 Dec 2024 22:03:07 +0100 Ideenmodellierer GNSS introduced power saving mode: Evo_2_23
Sun, 08 Dec 2024 21:59:22 +0100 Ideenmodellierer Added unit files for GPIO: Evo_2_23
Sun, 08 Dec 2024 21:56:48 +0100 Ideenmodellierer Position visualization: Evo_2_23
Sun, 08 Dec 2024 17:38:16 +0100 Ideenmodellierer UART Gnss: Added fletcher calculation: Evo_2_23
Sat, 07 Dec 2024 21:28:08 +0100 Ideenmodellierer Cleanup Gnss UART implementation: Evo_2_23
Tue, 03 Dec 2024 20:32:51 +0100 Ideenmodellierer Added Sat Status Overview: Evo_2_23
Tue, 03 Dec 2024 20:24:06 +0100 Ideenmodellierer DevBugfix Co2 sensor details: Evo_2_23
Mon, 02 Dec 2024 11:16:10 +0100 heinrichsweikamp Add a line to the compass heading dive menu that shows the currently set heading to enable the Evo_2_23
Tue, 26 Nov 2024 21:30:06 +0100 Ideenmodellierer Cleanup Internal Uart: Evo_2_23
Tue, 26 Nov 2024 21:01:13 +0100 Ideenmodellierer Cleanup Internal Uart: Evo_2_23
Thu, 14 Nov 2024 20:13:18 +0100 Ideenmodellierer Bugfix sensor de-/activation handling: Evo_2_23
Wed, 13 Nov 2024 17:56:02 +0100 Ideenmodellierer Bugfix scrubber time: Evo_2_23
Wed, 13 Nov 2024 17:55:05 +0100 Ideenmodellierer Bugfix real scrubber time decreased in sim mode: Evo_2_23
Mon, 04 Nov 2024 20:21:02 +0100 Ideenmodellierer UART6 DMA handling: Evo_2_23
Sun, 03 Nov 2024 20:53:05 +0100 Ideenmodellierer Moved UART6 into a separate unit: Evo_2_23
Sun, 03 Nov 2024 18:19:51 +0100 Ideenmodellierer Improved mix mode ADC conversion: Evo_2_23
Sun, 03 Nov 2024 15:44:54 +0100 Ideenmodellierer Added view for position data: Evo_2_23
Sun, 03 Nov 2024 15:43:04 +0100 Ideenmodellierer GNSS support for external UART interface: Evo_2_23
Sun, 03 Nov 2024 15:40:55 +0100 Ideenmodellierer Switch external interface tx communication to DMA: Evo_2_23
Sun, 03 Nov 2024 15:37:00 +0100 Ideenmodellierer Bugfix external interface power up after sleep: Evo_2_23
Mon, 28 Oct 2024 20:34:58 +0100 Ideenmodellierer External sensor UART: Switch to DMA TX transfers: Evo_2_23
Sat, 19 Oct 2024 20:10:56 +0200 Ideenmodellierer SlowExitTimer: Evo_2_23
Sat, 19 Oct 2024 20:06:55 +0200 Ideenmodellierer Devbugfix SlowExit depth: Evo_2_23
Tue, 15 Oct 2024 21:10:45 +0200 Ideenmodellierer Adapted limit for better gas warning: Evo_2_23
Tue, 15 Oct 2024 21:07:07 +0200 Ideenmodellierer Ascent speed visualization: Evo_2_23
Tue, 15 Oct 2024 20:00:37 +0200 Ideenmodellierer VPMTable deco stop visualization: Evo_2_23
Tue, 15 Oct 2024 19:12:05 +0200 Ideenmodellierer Devbugfix Sample time resolution for longer dives: Evo_2_23
Tue, 15 Oct 2024 19:07:19 +0200 Ideenmodellierer Define state of new GPIO out pins: Evo_2_23
Sun, 13 Oct 2024 18:13:56 +0200 ideenmodellierer Deactivated GNSS per default Evo_2_23
Sun, 13 Oct 2024 18:13:35 +0200 ideenmodellierer Adaptation custom view deco plan for VPM: Evo_2_23
Sun, 13 Oct 2024 18:07:23 +0200 ideenmodellierer Bugfix de-/activation of deco stop consideration in simulator: Evo_2_23
Sun, 13 Oct 2024 17:38:16 +0200 ideenmodellierer DevBugfix SlowExit edit display: Evo_2_23
Sun, 13 Oct 2024 17:36:32 +0200 ideenmodellierer Ascent speed display: Evo_2_23
Thu, 03 Oct 2024 20:25:49 +0200 Ideenmodellierer Disable GNSS operations using compile switch: Evo_2_23
Wed, 02 Oct 2024 22:18:19 +0200 Ideenmodellierer VPM table mode: Evo_2_23
Wed, 02 Oct 2024 22:07:13 +0200 Ideenmodellierer Bugfix simulator/planer: Evo_2_23
Tue, 01 Oct 2024 14:18:21 +0200 heinrichsweikamp minor: LED/Vibration behavior on wake-up Evo_2_23
Mon, 30 Sep 2024 21:56:05 +0200 Ideenmodellierer Added data path and visualization for position data: Evo_2_23
Thu, 26 Sep 2024 18:40:41 +0200 ideenmodellierer Disabled debug features Evo_2_23
Thu, 26 Sep 2024 18:36:05 +0200 ideenmodellierer Use dive profile as source for simulator: Evo_2_23
Thu, 26 Sep 2024 18:32:36 +0200 ideenmodellierer Development Feature Runtime in Debugview: Evo_2_23
Wed, 18 Sep 2024 14:31:06 +0200 heinrichsweikamp Zusammenf?hren Evo_2_23
Wed, 18 Sep 2024 14:30:45 +0200 heinrichsweikamp GNSS UART DMA test Evo_2_23
Wed, 11 Sep 2024 22:32:05 +0200 Ideenmodellierer Reenabled fast communication: Evo_2_23
Tue, 10 Sep 2024 21:18:36 +0200 ideenmodellierer Smal modification slow exit counter: Evo_2_23
Tue, 10 Sep 2024 21:16:32 +0200 ideenmodellierer Added hysteresis for ascent speed coloring: Evo_2_23
Fri, 06 Sep 2024 18:43:30 +0200 heinrichsweikamp cleanup and disable function for GNSS uart and DMA Evo_2_23
Fri, 06 Sep 2024 16:46:22 +0200 heinrichsweikamp GNSS work in progress Evo_2_23
Tue, 03 Sep 2024 20:46:42 +0200 Ideenmodellierer Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_23
Tue, 03 Sep 2024 15:30:53 +0200 heinrichsweikamp adding GNSS code Evo_2_23
Sun, 01 Sep 2024 21:38:06 +0200 Ideenmodellierer Improve communication stability: Evo_2_23
Sun, 01 Sep 2024 21:35:50 +0200 Ideenmodellierer Replaced global hardwareDisplay with unit access: Evo_2_23
Sun, 01 Sep 2024 20:31:01 +0200 Ideenmodellierer Minor screen cleanup: Evo_2_23
Sat, 31 Aug 2024 18:14:40 +0200 Ideenmodellierer Added compile switch for predive check menu: Evo_2_23
Sat, 31 Aug 2024 17:35:52 +0200 Ideenmodellierer Added slow exit timer function: Evo_2_23
Sat, 31 Aug 2024 17:28:37 +0200 Ideenmodellierer Added filtering of ascent speed: Evo_2_23
Thu, 29 Aug 2024 15:01:30 +0200 heinrichsweikamp support for led and vibration Evo_2_23
Thu, 29 Aug 2024 12:03:10 +0200 heinrichsweikamp new bluetooth work, bootloader work Evo_2_23
Sun, 25 Aug 2024 18:55:43 +0200 heinrichsweikamp brightness settings and proper power down for new screen Evo_2_23
Tue, 20 Aug 2024 15:18:43 +0200 Ideenmodellierer DevBugfix: Exit condition deco_stop_depth Evo_2_23
Fri, 16 Aug 2024 16:17:51 +0200 heinrichsweikamp Minor: Enable CO2-Sensor as default now Evo_2_23
Thu, 15 Aug 2024 20:44:35 +0200 Ideenmodellierer DevBugfix: Added missing default language value Evo_2_23
Wed, 14 Aug 2024 16:50:55 +0200 heinrichsweikamp minor Evo_2_23
Wed, 14 Aug 2024 16:44:46 +0200 heinrichsweikamp merge new screen stuff Evo_2_23
Wed, 14 Aug 2024 14:41:04 +0200 Ideenmodellierer Added first time initialization for new bluetooth module: Evo_2_23
Tue, 13 Aug 2024 13:24:54 +0200 heinrichsweikamp support for new screen default
Mon, 12 Aug 2024 22:25:46 +0200 Ideenmodellierer Instrument code for Bootloader: Evo_2_23
Mon, 12 Aug 2024 22:23:03 +0200 Ideenmodellierer Reactivate Bootloader: Evo_2_23
Mon, 12 Aug 2024 15:14:19 +0200 Ideenmodellierer Introduce speed dependend coloring of depth: Evo_2_23
Mon, 12 Aug 2024 14:30:22 +0200 Ideenmodellierer Decrease calculation interval for ascend speed: Evo_2_23
Mon, 22 Jul 2024 16:40:14 +0200 heinrichsweikamp Zusammenf?hren
Mon, 22 Jul 2024 16:39:48 +0200 heinrichsweikamp When opening the logbook, or scrolling inside a logbook page,
Mon, 22 Jul 2024 16:38:36 +0200 heinrichsweikamp Fix incorrect logging of bailout to Open Circuit when using the best gas.
Tue, 02 Jul 2024 20:05:08 +0200 Ideenmodellierer Bugfix empty line in deco plan (VPM only): Evo_2_23
Tue, 02 Jul 2024 19:24:03 +0200 Ideenmodellierer Only use deco gas for calculation if option is enabled: Evo_2_23
Tue, 07 May 2024 21:25:25 +0200 Ideenmodellierer Synchronize ADC and UART activities: Evo_2_23
Tue, 07 May 2024 21:20:56 +0200 Ideenmodellierer Code cleanup Evo_2_23
Tue, 07 May 2024 21:20:33 +0200 Ideenmodellierer Improvment battery charger visualization: Evo_2_23
Tue, 07 May 2024 21:12:37 +0200 Ideenmodellierer Bugfix initialisation of surface pressure: Evo_2_23
Sun, 05 May 2024 17:27:28 +0200 Ideenmodellierer Developer feature debug warning: Evo_2_23
Sun, 05 May 2024 17:20:56 +0200 Ideenmodellierer Do not show SP tab if PSCR mode is active: Evo_2_23
Mon, 18 Mar 2024 21:52:25 +0100 Ideenmodellierer Redefine Deco gas creation function: Evo_2_23
Sat, 09 Mar 2024 20:05:33 +0100 Ideenmodellierer Development bugfix menu id handling: Evo_2_23
Thu, 07 Mar 2024 21:51:18 +0100 Ideenmodellierer Potential Bugfix Selection MenuEdit lifecycle: Evo_2_23
Thu, 07 Mar 2024 21:46:49 +0100 Ideenmodellierer Bugfix Selection of custom views: Evo_2_23
Thu, 07 Mar 2024 21:42:23 +0100 Ideenmodellierer Added line checks for System Menu: Evo_2_23
Fri, 01 Mar 2024 19:30:29 +0100 Ideenmodellierer Check line enable/disable state when a new page is selected: Evo_2_23
Thu, 29 Feb 2024 18:49:55 +0100 Ideenmodellierer Consider flipped screen for Predive menu: Evo_2_23
Thu, 15 Feb 2024 21:26:28 +0100 Ideenmodellierer Bugfix tInfo_write_content_simple flip: Evo_2_23
Tue, 13 Feb 2024 17:30:24 +0100 heinrichsweikamp Minor: Remove absolute paths from the reference project files
Sun, 21 Jan 2024 22:26:37 +0100 Ideenmodellierer Consider pressure offset compensation in case of setting a default value: Evo_2_23
Sun, 21 Jan 2024 22:24:36 +0100 Ideenmodellierer Added new PreDiveCheck info page: Evo_2_23
Sun, 21 Jan 2024 22:18:51 +0100 Ideenmodellierer Added option to adjust pressure to diveO2 reference: Evo_2_23
Sat, 20 Jan 2024 19:38:52 +0100 Ideenmodellierer Update version number and set beta state Evo_2_23
Mon, 15 Jan 2024 21:44:18 +0100 Ideenmodellierer Migrated Sentinel protocol to new UART structure: Evo_2_23
Sun, 07 Jan 2024 21:25:34 +0100 Ideenmodellierer Added autofocus for T3_DecoTTS view: Evo_2_23
Sun, 07 Jan 2024 21:21:58 +0100 Ideenmodellierer Development bugfix CO2 LLC: Evo_2_23
Sun, 07 Jan 2024 21:20:15 +0100 Ideenmodellierer Code cleanup: UART protocol definitions Evo_2_23
Fri, 05 Jan 2024 16:01:22 +0100 Ideenmodellierer Added T3 autofocus for Gas list: Evo_2_23
Wed, 27 Dec 2023 19:37:17 +0100 ideenmodellierer Bugfixes and code cleanup for BF views: Evo_2_23
Wed, 27 Dec 2023 19:24:44 +0100 ideenmodellierer Bugfix BF temperatur display and cv switching: Evo_2_23
Sun, 17 Dec 2023 21:49:02 +0100 Ideenmodellierer Added autofocus for BF Navigation view: Evo_2_23
Sun, 17 Dec 2023 21:14:17 +0100 Ideenmodellierer Added event based display changes for big font view: Evo_2_23
Sun, 17 Dec 2023 21:10:04 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Thu, 16 Nov 2023 20:37:20 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Thu, 16 Nov 2023 20:36:35 +0100 Ideenmodellierer Activated work gas for (p)scr mode: Evo_2_23
Thu, 16 Nov 2023 20:32:09 +0100 Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not: Evo_2_23
Thu, 16 Nov 2023 20:25:01 +0100 Ideenmodellierer Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_23
Sun, 05 Nov 2023 20:21:42 +0100 Ideenmodellierer Added CO2 display to T3 Bigfont view: Evo_2_23
Sun, 05 Nov 2023 20:19:08 +0100 Ideenmodellierer Moved CO2 Menu from Xtra to Hardware: Evo_2_23
Wed, 11 Oct 2023 17:49:19 +0200 Ideenmodellierer Bugfix Line order of info screen with flip screen active: Evo_2_23
Mon, 09 Oct 2023 16:50:11 +0200 Ideenmodellierer Bugfix Flipscreen visualization:
Mon, 09 Oct 2023 16:50:11 +0200 Ideenmodellierer Bugfix Flipscreen visualization: Evo_2_23
Mon, 09 Oct 2023 15:10:10 +0200 Ideenmodellierer Starting 'Evo_2_23' branch Evo_2_23
Mon, 09 Oct 2023 11:23:27 +0200 heinrichsweikamp User Test
Mon, 25 Sep 2023 10:56:32 +0200 heinrichsweikamp 1.6.5 release
Sun, 24 Sep 2023 18:43:12 +0200 Ideenmodellierer Split definition of custom views:
Sun, 24 Sep 2023 18:39:26 +0200 Ideenmodellierer Added debug information in case an error in the settings has been detected:
Thu, 14 Sep 2023 13:24:30 +0200 heinrichsweikamp 1.6.4 release
Tue, 12 Sep 2023 12:02:49 +0200 heinrichsweikamp Testing build
Sun, 10 Sep 2023 11:46:45 +0200 heinrichsweikamp Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
Sun, 03 Sep 2023 18:03:49 +0200 Ideenmodellierer Bugfix CustomView selection during dive mode:
Sun, 03 Sep 2023 17:58:12 +0200 Ideenmodellierer Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Sun, 03 Sep 2023 17:53:07 +0200 Ideenmodellierer Used real sensor state in simulation:
Thu, 31 Aug 2023 10:33:25 +0200 heinrichsweikamp Testing build
Sun, 27 Aug 2023 20:59:12 +0200 Ideenmodellierer Added function to skip lines which are not needed for operation:
Sun, 27 Aug 2023 20:55:57 +0200 Ideenmodellierer Only jump to Sensor view during charging if sensors are connected:
Sun, 27 Aug 2023 20:51:13 +0200 Ideenmodellierer DevBugfix CO2 sensor in streaming mode:
Sat, 26 Aug 2023 13:38:13 +0200 heinrichsweikamp Testing build
Sat, 26 Aug 2023 13:37:06 +0200 heinrichsweikamp Zusammenf?hren
Sat, 26 Aug 2023 13:35:15 +0200 heinrichsweikamp Update Firmware version number
Mon, 21 Aug 2023 17:20:07 +0200 heinrichsweikamp Adds a simple countdown timer, available as a custom view in surface and dive mode.
Thu, 10 Aug 2023 21:35:34 +0200 Ideenmodellierer Cleanup initialisation code:
Thu, 10 Aug 2023 21:30:24 +0200 Ideenmodellierer Cleanup initialisation / deinitialization:
Thu, 10 Aug 2023 21:27:58 +0200 Ideenmodellierer Removed dependency to protocol setting:
Thu, 10 Aug 2023 21:24:04 +0200 Ideenmodellierer Update RTE version number
Tue, 08 Aug 2023 17:29:03 +0200 Ideenmodellierer Cleanup warnings
Mon, 07 Aug 2023 20:32:42 +0200 Ideenmodellierer Added CO2 mirrow instance:
Mon, 07 Aug 2023 20:29:44 +0200 Ideenmodellierer Migrated CO2 protocol implementation to new format:
Mon, 31 Jul 2023 20:10:27 +0200 Ideenmodellierer Use mirror sensortype for visualization:
Mon, 31 Jul 2023 20:00:06 +0200 Ideenmodellierer Expanded Sensor map structure:
Mon, 31 Jul 2023 19:50:36 +0200 Ideenmodellierer Moved DiveO2 sensor specific funtionality into separated file:
Mon, 31 Jul 2023 19:46:29 +0200 Ideenmodellierer Restructure UART based sensor handling:
Thu, 27 Jul 2023 21:52:19 +0200 Ideenmodellierer Bugfix PSCR Settings in Simulator Mode:
Sat, 05 Aug 2023 11:52:08 +0200 heinrichsweikamp Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Wed, 02 Aug 2023 08:41:03 +0200 heinrichsweikamp update current build for testing
Tue, 25 Jul 2023 14:48:58 +0200 heinrichsweikamp Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
Wed, 12 Jul 2023 10:13:25 +0200 heinrichsweikamp When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
Tue, 04 Jul 2023 14:39:06 +0200 heinrichsweikamp Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
Sun, 04 Jun 2023 21:59:26 +0200 Ideenmodellierer Dev Bugfx Empty buffer indication and stability improvments:
Sun, 04 Jun 2023 21:54:24 +0200 Ideenmodellierer Cleanup sensor data interface:
Wed, 31 May 2023 08:44:07 +0200 heinrichsweikamp Change support from Pyroscience -> DiveO2 sensors
Tue, 30 May 2023 18:44:20 +0200 Ideenmodellierer Bugfixloop UART multiplexer integration:
Mon, 29 May 2023 20:26:38 +0200 Ideenmodellierer Update digital O2 sensor information:
Mon, 29 May 2023 20:22:15 +0200 Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
Mon, 29 May 2023 18:26:55 +0200 Ideenmodellierer Update real multiplexer implementation:
Tue, 23 May 2023 21:50:19 +0200 Ideenmodellierer Discovery<=>SmallCPU inferface update:
Tue, 23 May 2023 21:45:34 +0200 Ideenmodellierer Added UART multiplexer support for DiveO2:
Mon, 22 May 2023 09:15:09 +0200 heinrichsweikamp Zusammenf?hren
Mon, 22 May 2023 09:14:27 +0200 heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Thu, 18 May 2023 09:49:17 +0200 heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 11 May 2023 12:13:03 +0200 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Wed, 10 May 2023 16:25:39 +0200 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:24:57 +0200 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Sat, 22 Apr 2023 21:11:50 -0500 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Fri, 21 Apr 2023 09:48:23 +0200 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:47:44 +0200 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:06 +0200 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Thu, 13 Apr 2023 09:35:43 +0200 heinrichsweikamp 1.6.2 release
Wed, 12 Apr 2023 09:56:00 +0200 heinrichsweikamp Update build for testing
Wed, 12 Apr 2023 09:30:15 +0200 heinrichsweikamp change button default responsiveness to 100
Wed, 12 Apr 2023 09:24:44 +0200 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Mon, 27 Mar 2023 10:04:53 +0200 heinrichsweikamp Update build for testing
Sun, 26 Mar 2023 18:34:30 +0200 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 11:27:29 +0200 heinrichsweikamp Preparing a 1.6.2 release candidate
Tue, 21 Mar 2023 12:57:37 +0100 heinrichsweikamp Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:56:54 +0100 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
Fri, 17 Mar 2023 09:35:25 +0100 heinrichsweikamp Some compass improvements from mikeller
Wed, 15 Mar 2023 09:18:07 +0100 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
Tue, 07 Mar 2023 22:14:20 +0100 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 20:02:05 +0100 Ideenmodellierer Added visualization of CO2 during dive:
Tue, 07 Mar 2023 19:59:02 +0100 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:55:13 +0100 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:52:18 +0100 Ideenmodellierer Updated outdated comment
Tue, 07 Mar 2023 19:51:30 +0100 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
Mon, 13 Mar 2023 22:23:00 +0100 Ideenmodellierer resolv merge
Sun, 05 Mar 2023 22:17:32 +0100 Ideenmodellierer Avoid blinking in customer view selection page:
Mon, 13 Mar 2023 22:18:28 +0100 Ideenmodellierer Added enum for Co2 display
Sun, 05 Mar 2023 22:14:53 +0100 Ideenmodellierer Added display of co2 ppm values:
Sun, 05 Mar 2023 22:06:47 +0100 Ideenmodellierer Added pressure compensation to CO2 detection:
Tue, 21 Feb 2023 21:19:31 +0100 Ideenmodellierer Code cleanup sensors under development:
Sun, 19 Feb 2023 21:52:02 +0100 Ideenmodellierer Update Sentinel protocol:
Sun, 19 Feb 2023 21:51:19 +0100 Ideenmodellierer Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:48:47 +0100 Ideenmodellierer Enable start dive in Big font display:
Sun, 19 Feb 2023 21:43:24 +0100 Ideenmodellierer Update Sentinel protocol:
Thu, 02 Feb 2023 17:35:54 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100 Ideenmodellierer Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:26:54 +0100 Ideenmodellierer Enable start dive in Big font display:
Thu, 02 Feb 2023 17:19:24 +0100 Ideenmodellierer Added data init function for external interface:
Mon, 06 Mar 2023 16:03:00 +0100 heinrichsweikamp NEW: Add mini compass with marker declination indication
Fri, 03 Mar 2023 10:41:44 +0100 heinrichsweikamp Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Tue, 14 Feb 2023 10:21:56 +0100 heinrichsweikamp Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Sun, 15 Jan 2023 21:51:54 +0100 Ideenmodellierer Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:48:34 +0100 Ideenmodellierer Optical sensor as default:
Sun, 15 Jan 2023 21:45:14 +0100 Ideenmodellierer Fix compiler switch:
Sun, 15 Jan 2023 21:43:33 +0100 Ideenmodellierer Improvment sensor Autodetection:
Sat, 14 Jan 2023 20:49:40 +0100 Ideenmodellierer Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:46:17 +0100 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:41:36 +0100 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:37:20 +0100 Ideenmodellierer Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:35:40 +0100 Ideenmodellierer Bugfix data synchronization after RTE start:
Sat, 07 Jan 2023 18:11:52 +0100 Ideenmodellierer Update CO2 sensor implementation:
Thu, 05 Jan 2023 18:30:06 +0100 Ideenmodellierer Development feature: external pressure sensor
Thu, 05 Jan 2023 18:27:04 +0100 Ideenmodellierer DigO2 added raw data request:
Thu, 05 Jan 2023 18:25:47 +0100 Ideenmodellierer Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:22:21 +0100 Ideenmodellierer DigO2 added raw data request:
Tue, 03 Jan 2023 19:47:12 +0100 Ideenmodellierer Bugfix set date (year):
Sun, 27 Nov 2022 15:18:00 +0100 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 20 Nov 2022 20:49:41 +0100 Ideenmodellierer Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:46:10 +0100 Ideenmodellierer Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:43:04 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:33 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:42:08 +0100 Ideenmodellierer Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:37:44 +0100 Ideenmodellierer Increased version number and set beta label
Sun, 20 Nov 2022 20:36:34 +0100 Ideenmodellierer Bugfix PSCR menu button label:
Tue, 08 Nov 2022 22:16:56 +0100 Ideenmodellierer Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 21:16:17 +0100 Ideenmodellierer Extension scrubber time:
Tue, 08 Nov 2022 21:13:14 +0100 Ideenmodellierer Bugfix compass bearing:
Thu, 03 Nov 2022 20:44:51 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100 Ideenmodellierer Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:37:06 +0100 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
Tue, 01 Nov 2022 09:55:45 +0100 Ideenmodellierer Bugfix release frame:
Fri, 28 Oct 2022 20:49:21 +0200 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:32:24 +0200 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
less more | rev 942: (0) -240 tip