Mercurial > public > ostc4

changeset 34:01cc5959f199

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
... OpenOCD scripts to dump firmwares (not working)
author jDG@sauge
date Wed, 07 Mar 2018 17:35:35 +0100
parents 2125ad7dcad5
children 6237372f76a4
files .hgsubstate Documentations/dump-disc.cfg Documentations/dump-rte.cfg
diffstat 3 files changed, 56 insertions(+), 1 deletions(-) [+]
line wrap: on
line diff
--- a/.hgsubstate	Tue Feb 27 13:57:30 2018 +0100
+++ b/.hgsubstate	Wed Mar 07 17:35:35 2018 +0100
@@ -1,4 +1,4 @@
 d065de711f7e1f1f493d367e35c6f0811b48f0c4 Common
 9beabb7ee86d59f32faddaf856ab9eaa520dd8be Discovery
 e6486abe8bc808f0ac5a31e58a543be8f354222a Small_CPU
-675b28e8f29067bcc2e747a934b24097310daa54 wiki
+bfd25bbec1679980289cfe7eb2c6e41345b2c763 wiki
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Documentations/dump-disc.cfg	Wed Mar 07 17:35:35 2018 +0100
@@ -0,0 +1,28 @@
+#! openocd -f
+# Define the prob used:
+source [find interface/stlink-v2.cfg]
+set WORKAREASIZE 0x8000
+transport select hla_swd
+
+# Reset options
+set ENABLE_LOW_POWER 1
+set STOP_WATCHDOG 1
+reset_config srst_only srst_nogate connect_assert_srst
+
+# Seelct the right chip
+set CHIPNAME stm32f427IIT6
+set CONNECT_UNDER_RESET 1
+source [find target/stm32f4x.cfg]
+
+# Allow to continue execution after a connection:
+init_reset run
+
+puts "Flash banks:"
+flash banks
+
+#puts "Reading FIRMWARE..."
+# Requires OpenOCD 0.10.0 / released January 2017 ?
+#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000
+
+#puts "Done."
+exit
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Documentations/dump-rte.cfg	Wed Mar 07 17:35:35 2018 +0100
@@ -0,0 +1,27 @@
+#! openocd -f
+# Define the prob used:
+source [find interface/stlink-v2.cfg]
+set WORKAREASIZE 0x8000
+transport select hla_swd
+
+# Reset options
+set ENABLE_LOW_POWER 1
+set STOP_WATCHDOG 1
+reset_config srst_only srst_nogate connect_assert_srst
+
+# Seelct the right chip
+set CHIPNAME stm32f411RETx
+set CONNECT_UNDER_RESET 1
+source [find target/stm32f4x.cfg]
+
+# Allow to continue execution after a connection:
+init_reset run
+
+#puts "Flash banks:"
+#flash banks
+
+#puts "Reading..."
+#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000
+
+#puts "Done."
+#exit