# HG changeset patch
# User Ideenmodellierer
# Date 1736797344 -3600
# Node ID 90edc237d60f42ec66251ff3d4547ebc8eb5690d
# Parent  58cc980ee8483ecc86c9cee580d1e9bc72e0b323
Bluetooth commands for new module:
The new Bluetooth module has a slightly different protocol then the previous => Some configuration steps needs to be skip because parameter is not supported and command structures need to be adapted. In the first step this is done for the Bootloader only.

diff -r 58cc980ee848 -r 90edc237d60f Discovery/Src/tComm.c
--- a/Discovery/Src/tComm.c	Mon Jan 13 18:36:04 2025 +0100
+++ b/Discovery/Src/tComm.c	Mon Jan 13 20:42:24 2025 +0100
@@ -388,10 +388,15 @@
 
 //	char aTxFactoryDefaults[50] = "AT&F1\r";
 
-    char aTxBufferEscapeSequence[50] = "+++";
+    char aTxBufferEscapeSequence[50] = "+++";	/* factory default */
     // limit is 19 chars, with 7 chars shown in BLE advertising mode
     //________________________123456789012345678901
+
+#ifndef BOOTLOADER_STANDALONE
     char aTxBufferName[50] = "AT+BNAME=OSTC4-12345\r";
+#else
+    char aTxBufferName[50] = "AT+UBTLN=OSTC4-12345\r";
+#endif
     char answerOkay[6] = "\r\nOK\r\n";
 
     gfx_number_to_string(5,1,&aTxBufferName[15],serial);
@@ -2187,17 +2192,36 @@
 	{
 		case BM_CONFIG_ECHO: 			sprintf(TxBuffer,"ATE0\r");
 			break;
-		case BM_CONFIG_SILENCE:			sprintf(TxBuffer,"ATS30=0\r");
+		case BM_CONFIG_SILENCE:
+#ifndef BOOTLOADER_STANDALONE
+										sprintf(TxBuffer,"ATS30=0\r");
+#else
+										BmTmpConfig++;
+#endif
 			break;
-		case BM_CONFIG_ESCAPE_DELAY:	sprintf(TxBuffer,"ATS12=10\r");
+		case BM_CONFIG_ESCAPE_DELAY:
+#ifndef BOOTLOADER_STANDALONE
+			sprintf(TxBuffer,"ATS12=10\r");
+#else
+										BmTmpConfig++;
+#endif
 			break;
-		case BM_CONFIG_SIGNAL_POLL:		sprintf(TxBuffer,"AT+BSTPOLL=100\r");
+		case BM_CONFIG_SIGNAL_POLL:
+#ifndef BOOTLOADER_STANDALONE
+										sprintf(TxBuffer,"AT+BSTPOLL=100\r");
+#else
+										BmTmpConfig++;
+#endif
 			break;
 		case BM_CONFIG_BAUD:
 #ifdef ENABLE_FAST_COMM
+ 	#ifndef BOOTLOADER_STANDALONE
 										sprintf(TxBuffer,"AT%%B22\r");
+	#else
+										sprintf(TxBuffer,"AT+UMRS=460800,1,8,1,1,1\r");
+	#endif
 #else
-										BmTmpConfig++;
+										BmTmpConfig = BM_CONFIG_DONE;
 #endif
 			break;
 		case BM_CONFIG_RETRY:			ConfigRetryCnt--;
@@ -2267,7 +2291,11 @@
 			}
 			else if((BmTmpConfig == BM_CONFIG_BAUD) && (result == HAL_OK) && (UartHandle.Init.BaudRate == 460800)) /* This shut not happen because default speed is 115200 => update module configuration */
 			{
+#ifndef BOOTLOADER_STANDALONE
 				sprintf(TxBuffer,"AT%%B8\r");	/* set default baudrate */
+#else
+				sprintf(TxBuffer,"AT+UMRS=115200,1,8,1,1,1\r");
+#endif
 				CmdSize = strlen(TxBuffer);
 				HAL_UART_Transmit(&UartHandle, (uint8_t*)TxBuffer,CmdSize, 2000);
 				HAL_UART_DeInit(&UartHandle);
@@ -2281,6 +2309,10 @@
 			if(result == HAL_OK)
 			{
 				BmTmpConfig++;
+				if(BmTmpConfig == BM_CONFIG_RETRY)
+				{
+					BmTmpConfig = BM_CONFIG_DONE;
+				}
 			}
 			if(BmTmpConfig == BM_CONFIG_ECHO)
 			{