| Thu, 16 Nov 2023 20:32:09 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not:
Evo_2_23
|
| Sun, 24 Sep 2023 18:39:26 +0200 |
Ideenmodellierer |
Added debug information in case an error in the settings has been detected:
|
| Mon, 21 Aug 2023 17:20:07 +0200 |
heinrichsweikamp |
Adds a simple countdown timer, available as a custom view in surface and dive mode.
|
| Mon, 31 Jul 2023 20:00:06 +0200 |
Ideenmodellierer |
Expanded Sensor map structure:
|
| Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Thu, 02 Feb 2023 17:35:54 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| Tue, 08 Nov 2022 22:16:56 +0100 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Fri, 28 Oct 2022 20:29:37 +0200 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
| Fri, 05 Aug 2022 15:26:28 +0200 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
| Mon, 22 Nov 2021 19:39:11 +0100 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
| Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
| Thu, 11 Mar 2021 21:43:43 +0100 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
| Fri, 12 Feb 2021 21:37:50 +0100 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
| Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
| Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
| Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
| Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
| Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
| Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| Sun, 13 Sep 2020 20:55:54 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
| Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
| Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
| Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
| Tue, 13 Aug 2019 21:10:46 +0200 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
| Sat, 17 Aug 2019 18:47:08 +0200 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
| Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
| Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
| Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
| Tue, 01 Jan 2019 21:03:33 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
| Mon, 26 Nov 2018 10:50:39 +0300 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
| Sat, 28 Apr 2018 11:52:34 +0200 |
heinrichsweikamp |
include in ostc4 repository
|
