| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
| Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
| Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
| Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
| Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
| Tue, 30 Mar 2021 10:34:12 +0200 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
| Thu, 25 Feb 2021 12:20:43 +0100 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
| Fri, 05 Feb 2021 14:53:50 +0100 |
heinrichsweikamp |
Update RTE required value for release
|
| Fri, 05 Feb 2021 14:50:05 +0100 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
| Thu, 17 Dec 2020 09:52:12 +0100 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
| Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
| Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
| Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
| Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
| Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
| Sat, 10 Oct 2020 18:34:10 +0200 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
| Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| Fri, 25 Sep 2020 11:13:03 +0200 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
| Thu, 10 Sep 2020 20:51:36 +0200 |
Ideenmodellierer |
Added compile switch for motion control:
|
| Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
| Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
| Thu, 20 Aug 2020 21:25:38 +0200 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
| Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
| Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
| Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
| Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
| Wed, 15 Jan 2020 13:41:01 +0100 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
| Sun, 01 Dec 2019 17:28:35 +0100 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
| Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
| Tue, 10 Sep 2019 20:51:55 +0200 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
| Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
| Tue, 13 Aug 2019 21:10:46 +0200 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
| Sun, 06 Oct 2019 14:07:51 +0200 |
heinrichsweikamp |
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
|
| Sat, 17 Aug 2019 18:47:08 +0200 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
| Sun, 04 Aug 2019 11:01:06 +0200 |
heinrichsweikamp |
building a 1.5
v1.5.0 release
|
| Sun, 30 Jun 2019 22:12:15 +0200 |
heinrichsweikamp |
increase RTE to 1.9 and Firmware to 1.4.9 beta
|
| Wed, 19 Jun 2019 14:31:50 +0200 |
Jan Mulder |
bugfix: correct packed main version number in dive header
fix-version
|
| Mon, 06 May 2019 09:00:58 +0200 |
heinrichsweikamp |
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
|
| Sun, 28 Apr 2019 09:41:43 +0200 |
heinrichsweikamp |
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
|
| Mon, 15 Apr 2019 17:35:47 +0200 |
Jan Mulder |
feature: allow new saturation to be set in lower left corner
bm-3
|
| Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
