| Mon, 22 May 2023 09:14:27 +0200 |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Thu, 11 May 2023 12:13:03 +0200 |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
| Wed, 10 May 2023 16:24:57 +0200 |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
| Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| Fri, 17 Mar 2023 09:35:25 +0100 |
heinrichsweikamp |
Some compass improvements from mikeller
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Tue, 07 Mar 2023 20:02:05 +0100 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
| Mon, 13 Mar 2023 22:18:28 +0100 |
Ideenmodellierer |
Added enum for Co2 display
|
| Sun, 05 Mar 2023 22:14:53 +0100 |
Ideenmodellierer |
Added display of co2 ppm values:
|
| Sun, 19 Feb 2023 21:48:47 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Mon, 06 Mar 2023 16:03:00 +0100 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Fri, 28 Oct 2022 19:39:20 +0200 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
| Fri, 05 Aug 2022 16:04:52 +0200 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
| Mon, 25 Apr 2022 21:07:28 +0200 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
| Wed, 30 Mar 2022 18:07:21 +0200 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
| Sat, 12 Mar 2022 23:01:11 +0100 |
Ideenmodellierer |
Added Charging view:
Betatest
|
| Tue, 21 Dec 2021 19:32:29 +0100 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Mon, 01 Nov 2021 12:39:34 +0100 |
heinrichs weikamp |
Undo Rev. 660
|
| Sun, 08 Aug 2021 09:36:23 +0200 |
heinrichsweikamp |
Add option to reset bluetooth name
|
| Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
| Wed, 24 Mar 2021 21:28:41 +0100 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
| Tue, 23 Feb 2021 21:55:26 +0100 |
Ideenmodellierer |
Warnings:
|
| Mon, 04 Jan 2021 21:32:39 +0100 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
| Sun, 03 Jan 2021 14:43:16 +0100 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
| Sat, 12 Dec 2020 20:52:58 +0100 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
| Sun, 29 Nov 2020 22:58:11 +0100 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
| Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
| Sun, 15 Nov 2020 20:09:31 +0100 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
| Sun, 08 Nov 2020 18:49:54 +0100 |
Ideenmodellierer |
Added color indicator for focus state:
|
| Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| Wed, 07 Oct 2020 18:07:10 +0200 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
| Tue, 15 Sep 2020 20:54:54 +0200 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
| Sun, 13 Sep 2020 20:58:37 +0200 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
| Sun, 06 Sep 2020 21:15:34 +0200 |
Ideenmodellierer |
Added color coding for cv gas list:
|
| Sun, 30 Aug 2020 17:26:52 +0200 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
| Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
| Mon, 18 May 2020 21:51:08 +0200 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
| Tue, 12 May 2020 23:03:29 +0200 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
| Tue, 24 Mar 2020 22:32:48 +0100 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
| Mon, 23 Mar 2020 21:13:52 +0100 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
| Thu, 05 Mar 2020 22:31:50 +0100 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
| Sat, 29 Feb 2020 22:25:20 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Tue, 18 Feb 2020 12:41:45 +0100 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
| Sun, 12 Jan 2020 17:47:02 +0100 |
ideenmodellierer |
Bugfix Display of Sensor values:
Improment_NVM
|
| Tue, 26 Nov 2019 18:13:26 +0100 |
ideenmodellierer |
Bugfix negativ ascend bar:
ImproveBluetooth
|
| Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
| Mon, 16 Sep 2019 22:49:34 +0200 |
ideenmodellierer |
Added missing customerview selection
MotionDetection
|
| Sun, 08 Sep 2019 13:45:43 +0200 |
ideenmodellierer |
Removed some warnings
MotionDetection
|
| Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
| Tue, 13 Aug 2019 21:12:17 +0200 |
ideenmodellierer |
Added a function to count the active custom views.
MotionDetection
|
| Sat, 20 Jul 2019 21:42:45 +0200 |
Ideenmodellierer |
Merge default
MotionDetection
|
| Mon, 17 Jun 2019 19:56:38 +0200 |
ideenmodellierer |
Fix misalignment of do while loop
MotionDetection
|
| Mon, 17 Jun 2019 19:53:01 +0200 |
ideenmodellierer |
Bugfix: selection of current view not working
MotionDetection
|
| Tue, 11 Jun 2019 05:30:09 +0200 |
Ideenmodellierer |
Pass action to customer vie update function.
MotionDetection
|
| Thu, 03 Oct 2019 21:34:52 +0200 |
ideenmodellierer |
Minor changes to debug view
FlightMode_Improvment
|
| Sat, 17 Aug 2019 18:44:43 +0200 |
ideenmodellierer |
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing)
PressureMeasure_Improvment
|
| Mon, 17 Jun 2019 21:47:19 +0200 |
ideenmodellierer |
Bugfix Overview, O2 values and mV in flip display mode
Bugfix_Flip_FirmwareUpdate
|
| Tue, 09 Apr 2019 16:30:21 +0200 |
Jan Mulder |
feature: Relative GF to Saturation renames
bm-1
|
| Mon, 01 Apr 2019 15:50:41 +0200 |
Jan Mulder |
cleanup: random set of cleanups
div-fixes-3
|
| Fri, 29 Mar 2019 14:00:43 +0100 |
Jan Mulder |
Bugfix: correct presentation error in tissues custom view
div-fixes-3
|
| Thu, 28 Mar 2019 09:54:29 +0100 |
Jan Mulder |
Bugfix, trivial: correctly present avg depth in overview custom
edit-fix
|
| Thu, 28 Mar 2019 08:26:17 +0100 |
Jan Mulder |
Bugfix: handle rounding of TTS and future TTS consistently
edit-fix
|
| Tue, 26 Mar 2019 16:02:22 +0100 |
Jan Mulder |
New feature: do not show sensor customviews when no sensors attached
cv-persistent
|
| Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
| Thu, 21 Mar 2019 15:28:47 +0100 |
Jan Mulder |
cleanup: another cleanup session (data_exchange_main.c)
div-fixes-cleaup-2
|
| Wed, 20 Mar 2019 16:24:10 +0100 |
Jan Mulder |
Bugfix, minor: color the overview customview correctly
div-fixes-cleaup-2
|
| Sat, 16 Mar 2019 21:52:06 +0100 |
Jan Mulder |
Bugfix: show proper dive mode
div-fixes-cleanup-1
|
| Fri, 15 Mar 2019 15:04:57 +0100 |
Jan Mulder |
Bugfix: average temperature on arrival from RTE instead of display time
avg-temp
|
| Fri, 15 Mar 2019 12:53:14 +0100 |
Jan Mulder |
cleanup: forgotten cleanup from 9da7dd50e2ec
cleanup-2
|
| Wed, 13 Mar 2019 20:51:50 +0100 |
heinrichsweikamp |
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
|
| Mon, 11 Mar 2019 19:54:20 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 2)
max-depth
|
| Thu, 07 Mar 2019 21:52:23 +0100 |
Jan Mulder |
cleanup: get rid of some compile warnings
cleanup-1
|
| Sat, 02 Mar 2019 17:42:06 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
| Thu, 28 Feb 2019 20:05:51 +0100 |
Ideenmodellierer |
Adjust voltage location
FlipDisplay
|
| Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
| Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
| Tue, 01 Jan 2019 21:02:17 +0100 |
Ideenmodellierer |
Added option to handled mirrored display to existing functions
FlipDisplay
|
| Wed, 28 Nov 2018 09:36:33 +0300 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
| Tue, 27 Nov 2018 18:31:21 +0100 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
| Tue, 31 Jul 2018 22:28:21 +0200 |
Ideenmodellierer |
Resolved warnings pointing to possible invalid memory access
|
| Sat, 28 Apr 2018 11:52:34 +0200 |
heinrichsweikamp |
include in ostc4 repository
|
