Mercurial > public > ostc4
graph
-
Merged in janlmulder/ostc4/maintain-2 (pull request #38)Mon, 10 Feb 2020 08:23:15 +0000, by heinrichsweikamp
-
Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2Fri, 07 Feb 2020 16:38:11 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)Wed, 15 Jan 2020 10:53:15 +0000, by heinrichsweikamp
-
merged default into Improvment_NVM Improment_NVMTue, 14 Jan 2020 21:52:15 +0100, by Ideenmodellierer
-
Added compile switch for restoring of last known date after power lost: Improment_NVMTue, 14 Jan 2020 21:38:45 +0100, by ideenmodellierer
-
Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVMTue, 14 Jan 2020 21:10:37 +0100, by ideenmodellierer
-
Bugfix: Warnings displayed in Gauge Mode: Improment_NVMTue, 14 Jan 2020 21:08:45 +0100, by ideenmodellierer
-
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVMMon, 13 Jan 2020 20:27:57 +0100, by ideenmodellierer
-
Bugfix display compass calibration frozen: Improment_NVMSun, 12 Jan 2020 21:33:13 +0100, by ideenmodellierer
-
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVMSun, 12 Jan 2020 19:55:22 +0100, by ideenmodellierer
-
Bugfix invalid voltage / temperatur after coldstart: Improment_NVMSun, 12 Jan 2020 19:50:14 +0100, by ideenmodellierer
-
Bugfix parallel call of external flash functions: Improment_NVMSun, 12 Jan 2020 18:06:59 +0100, by ideenmodellierer
-
Bugfix Min max values for device data checks: Improment_NVMSun, 12 Jan 2020 17:57:11 +0100, by ideenmodellierer
-
Bugfix: display of time of minimum voltag: Improment_NVMSun, 12 Jan 2020 17:45:36 +0100, by ideenmodellierer
-
We got one report of false/freezd depth reading when jumping into 2m depthWed, 08 Jan 2020 15:35:15 +0100, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)Sun, 05 Jan 2020 14:57:50 +0000, by heinrichsweikamp
-
merged default into ImproveBluetooth ImproveBluetoothSun, 29 Dec 2019 09:42:16 +0100, by Ideenmodellierer
-
Added retry through power off/on cycle: ImproveBluetoothSat, 28 Dec 2019 19:42:04 +0100, by ideenmodellierer
-
Revert change to keep connection open in case of BlueMod messages: ImproveBluetoothSat, 21 Dec 2019 20:21:26 +0100, by ideenmodellierer
-
Bugfix: Merge / cleanup problem: ImproveBluetoothMon, 02 Dec 2019 22:03:05 +0100, by ideenmodellierer
-
Added missing enum for configuration states ImproveBluetoothSun, 01 Dec 2019 19:55:15 +0100, by ideenmodellierer
-
Added function for BlueMod configuration: ImproveBluetoothTue, 26 Nov 2019 22:12:25 +0100, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetoothTue, 26 Nov 2019 21:17:57 +0100, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetoothTue, 26 Nov 2019 21:16:36 +0100, by ideenmodellierer
-
Configurate FlowCntrl Pins as noPull ImproveBluetoothTue, 26 Nov 2019 21:14:58 +0100, by ideenmodellierer
-
Move Constants and libm to start of firmware ROM block: ImproveBluetoothTue, 26 Nov 2019 18:02:48 +0100, by ideenmodellierer
-
Merged in janlmulder/ostc4/maintain-1 (pull request #35)Mon, 02 Dec 2019 07:56:47 +0000, by heinrichsweikamp
-
Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1Sun, 01 Dec 2019 17:12:27 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)Sun, 24 Nov 2019 15:46:58 +0000, by heinrichsweikamp
-
Added key direction awarness to t3, t5 and t6 views: MotionDetectionMon, 21 Oct 2019 21:16:53 +0200, by ideenmodellierer
-
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetectionMon, 21 Oct 2019 18:37:43 +0200, by ideenmodellierer
-
Consider number of available t3 views in sector handling: MotionDetectionThu, 17 Oct 2019 23:09:17 +0200, by ideenmodellierer
-
Combine variables in a structure to improve readability of code MotionDetectionThu, 17 Oct 2019 21:15:42 +0200, by ideenmodellierer
-
Simplified pitch detection state machine: MotionDetectionThu, 10 Oct 2019 22:11:59 +0200, by ideenmodellierer
-
Added missing customerview selection MotionDetectionMon, 16 Sep 2019 22:49:34 +0200, by ideenmodellierer
-
Incremented "idle window" for scroll detection MotionDetectionMon, 16 Sep 2019 22:46:24 +0200, by ideenmodellierer
-
Motion events effect custom view in dive mode only MotionDetectionMon, 16 Sep 2019 20:57:40 +0200, by ideenmodellierer
-
Added string for Empty/ Debug custom view selection MotionDetectionMon, 16 Sep 2019 20:21:06 +0200, by ideenmodellierer
-
Use Enum values for initialization and setting check: MotionDetectionTue, 10 Sep 2019 20:51:55 +0200, by ideenmodellierer
-
Add scroll event by pitch angle detection: MotionDetectionSun, 08 Sep 2019 13:45:17 +0200, by ideenmodellierer
-
merged default into MotionDetection MotionDetectionMon, 19 Aug 2019 17:50:55 +0200, by Ideenmodellierer
-
Added parameter for number of sectors to be defined MotionDetectionMon, 19 Aug 2019 17:39:47 +0200, by ideenmodellierer
-
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetectionTue, 13 Aug 2019 21:13:54 +0200, by ideenmodellierer
-
Added a function to count the active custom views. MotionDetectionTue, 13 Aug 2019 21:12:17 +0200, by ideenmodellierer
-
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetectionTue, 13 Aug 2019 21:10:46 +0200, by ideenmodellierer
-
Fix misalignment of do while loop MotionDetectionMon, 17 Jun 2019 19:56:38 +0200, by ideenmodellierer
-
Bugfix: selection of current view not working MotionDetectionMon, 17 Jun 2019 19:53:01 +0200, by ideenmodellierer
-
Update call of motion detection function MotionDetectionMon, 17 Jun 2019 19:47:07 +0200, by ideenmodellierer
-
Pass action to customer vie update function. MotionDetectionTue, 11 Jun 2019 05:30:09 +0200, by Ideenmodellierer
-
Added trigger of middle button action in case of a detected shake MotionDetectionFri, 24 May 2019 22:01:46 +0200, by ideenmodellierer
-
Added new files for motion detection (shaking) detection MotionDetectionFri, 24 May 2019 22:00:38 +0200, by ideenmodellierer
-
Add Support for new end-2019 hardware:Sun, 24 Nov 2019 16:08:29 +0100, by heinrichsweikamp
-
Add Support for new end-2019 hardware:Sat, 23 Nov 2019 18:39:50 +0100, by heinrichsweikamp
-
Add Support for new end-2019 hardware:Sat, 23 Nov 2019 15:36:38 +0100, by heinrichsweikamp
-
Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 releaseWed, 09 Oct 2019 20:05:47 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)Wed, 09 Oct 2019 07:08:43 +0000, by heinrichsweikamp
-
Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-messTue, 08 Oct 2019 16:41:57 +0200, by Jan Mulder
-
MergeSun, 06 Oct 2019 14:12:41 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)Sun, 06 Oct 2019 11:58:36 +0000, by heinrichsweikamp
-
Decrease ManualExitDiveCounter in surface mode FlightMode_ImprovmentThu, 03 Oct 2019 21:39:28 +0200, by ideenmodellierer
-
Minor changes to debug view FlightMode_ImprovmentThu, 03 Oct 2019 21:34:52 +0200, by ideenmodellierer
-
Added option to manually leave dive mode to system menu FlightMode_ImprovmentThu, 03 Oct 2019 21:33:47 +0200, by ideenmodellierer
-
Added function to support manuel exit of dive mode FlightMode_ImprovmentThu, 03 Oct 2019 21:30:16 +0200, by ideenmodellierer
-
Added function to evaluate the state of the surface pressure history memory FlightMode_ImprovmentThu, 03 Oct 2019 21:26:46 +0200, by ideenmodellierer
-
Removed not used wireless menu items FlightMode_ImprovmentTue, 01 Oct 2019 19:58:58 +0200, by ideenmodellierer
-
Added compile switch to enable debug view option in system menu FlightMode_ImprovmentTue, 01 Oct 2019 19:43:30 +0200, by ideenmodellierer
-
Removed averaging of pressure and temperatur values FlightMode_ImprovmentTue, 01 Oct 2019 19:13:41 +0200, by ideenmodellierer
-
change max. allowed surface pressure to 1030hPa (As in the small OSTC)Sun, 06 Oct 2019 14:07:51 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)Mon, 19 Aug 2019 11:42:31 +0000, by heinrichsweikamp
-
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_ImprovmentSat, 17 Aug 2019 19:03:47 +0200, by ideenmodellierer
-
Added function to avoid divemode activation during Landing: PressureMeasure_ImprovmentSat, 17 Aug 2019 18:57:15 +0200, by ideenmodellierer
-
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:47:08 +0200, by ideenmodellierer
-
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:44:43 +0200, by ideenmodellierer
-
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_ImprovmentTue, 13 Aug 2019 21:46:26 +0200, by ideenmodellierer
-
add update files for testing purposesSat, 20 Jul 2019 10:44:01 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)Thu, 18 Jul 2019 14:26:56 +0000, by heinrichsweikamp
-
Added plausibility check for pressure values I2C_ImprovmentWed, 17 Jul 2019 22:43:51 +0200, by ideenmodellierer
-
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_ImprovmentWed, 17 Jul 2019 22:42:15 +0200, by ideenmodellierer
-
Deactivated internal pullups and I2C interrupt callback I2C_ImprovmentWed, 17 Jul 2019 22:41:31 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)Mon, 01 Jul 2019 14:18:39 +0000, by heinrichsweikamp
-
bugfix: implement battery at end in dive header fix-batt-1Thu, 20 Jun 2019 14:24:57 +0200, by Jan Mulder
-
increase RTE to 1.9 and Firmware to 1.4.9 betaSun, 30 Jun 2019 22:12:15 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)Sun, 30 Jun 2019 19:52:46 +0000, by heinrichsweikamp
-
Added start of frame detection for HUD data O2_SensorSyncSun, 30 Jun 2019 21:25:58 +0200, by ideenmodellierer
-
Moved indication variable for received HUD data to tCCR file. O2_SensorSyncSun, 30 Jun 2019 21:18:05 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-version (pull request #27)Wed, 19 Jun 2019 13:12:25 +0000, by heinrichsweikamp
-
bugfix: correct packed main version number in dive header fix-versionWed, 19 Jun 2019 14:31:50 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)Wed, 19 Jun 2019 13:12:01 +0000, by heinrichsweikamp
-
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:33 +0200, by ideenmodellierer
-
Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:19 +0200, by ideenmodellierer
-
Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:46:56 +0200, by ideenmodellierer
-
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.Sat, 01 Jun 2019 10:12:15 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)Fri, 31 May 2019 06:22:50 +0000, by heinrichsweikamp
-
bugfix: make stopwatch and divetime run in sync cleanup-4Wed, 29 May 2019 14:02:27 +0200, by Jan Mulder
-
cleanup: factor out SHelper typedef (and more) cleanup-4Fri, 24 May 2019 09:29:29 +0200, by Jan Mulder
-
bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4Tue, 21 May 2019 11:11:05 +0200, by Jan Mulder
-
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4Mon, 20 May 2019 13:06:02 +0200, by Jan Mulder
-
bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4Mon, 20 May 2019 12:57:31 +0200, by Jan Mulder
-
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4Mon, 20 May 2019 10:13:44 +0200, by Jan Mulder
-
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4Mon, 20 May 2019 10:05:27 +0200, by Jan Mulder
-
cleanup: remove commented/unused code, make static cleanup-4Fri, 17 May 2019 21:19:04 +0200, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)Fri, 17 May 2019 06:38:56 +0000, by heinrichsweikamp
-
cleanup: remove unused code, make static, remove commented code cleanup-3Thu, 16 May 2019 08:56:15 +0200, by Jan Mulder
-
Possible bugfix: do not use bitwise and (&) cleanup-3Thu, 16 May 2019 08:54:33 +0200, by Jan Mulder
-
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)Mon, 13 May 2019 13:37:34 +0000, by heinrichsweikamp
-
Added tag v1.4.8 release for changeset ba9d99a2e310 div-fixes-6Sun, 12 May 2019 09:45:32 +0200, by Jan Mulder
-
bugfix, consistency: show deco, NDL after 1 minute div-fixes-6Thu, 02 May 2019 10:05:28 +0200, by Jan Mulder
-
cleanup: no useless checks for simulator state div-fixes-6Mon, 29 Apr 2019 19:43:05 +0200, by Jan Mulder
-
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 releaseMon, 06 May 2019 15:45:19 +0200, by heinrichsweikamp
-
Minor: Some Texts fixed, allign RTErequired* values with RTE firmwareMon, 06 May 2019 09:00:58 +0200, by heinrichsweikamp
-
add update files for testing purposesSun, 05 May 2019 11:06:02 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)Thu, 02 May 2019 11:12:25 +0000, by heinrichsweikamp
-
Bugfix: write NDL in logbook correctly ndl-in-logbookThu, 02 May 2019 13:08:17 +0200, by Jan Mulder
-
translate some comments into englishWed, 01 May 2019 14:45:47 +0200, by heinrichsweikamp
-
Fix typos (There are still many...)Wed, 01 May 2019 14:39:46 +0200, by heinrichsweikamp
-
Make RTE show as 1.8.0 beta, add update files for testing purposesMon, 29 Apr 2019 19:25:24 +0200, by heinrichsweikamp
-
add update files for testing purposesSun, 28 Apr 2019 17:57:39 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)Sun, 28 Apr 2019 15:54:46 +0000, by heinrichsweikamp
-
Rework SPI error handling. IPC_Sync_Improvment_3Sun, 28 Apr 2019 10:16:38 +0200, by ideenmodellierer
-
Rework pressure/ temperature data aquisition IPC_Sync_Improvment_3Sun, 28 Apr 2019 10:06:27 +0200, by ideenmodellierer
-
Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_3Sun, 28 Apr 2019 09:54:43 +0200, by ideenmodellierer
-
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 betaSun, 28 Apr 2019 09:41:43 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/write-from-sim (pull request #20)Sun, 28 Apr 2019 07:05:23 +0000, by heinrichsweikamp
-
cleanup: also write gas and setpoint changes in simulator mode write-from-simSat, 27 Apr 2019 09:32:16 +0200, by Jan Mulder
-
feature, debug: make simulator write a logbook entry write-from-simWed, 24 Apr 2019 17:10:51 +0200, by Jan Mulder
-
cleanup: do not pass large struct by value write-from-simTue, 23 Apr 2019 21:03:24 +0200, by Jan Mulder
-
cleanup: make things static where possible. write-from-simTue, 23 Apr 2019 17:41:20 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)Fri, 26 Apr 2019 10:36:11 +0000, by heinrichsweikamp
-
Added batch to copy bins from release folder IPC_Sync_Improvment_2Sun, 14 Apr 2019 14:27:32 +0200, by ideenmodellierer
-
Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2Sun, 14 Apr 2019 14:22:41 +0200, by ideenmodellierer
-
Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2Sun, 14 Apr 2019 11:43:29 +0200, by ideenmodellierer
-
Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2Sun, 14 Apr 2019 11:38:14 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/bm-3 (pull request #19)Tue, 23 Apr 2019 14:21:32 +0000, by heinrichsweikamp
-
Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3Tue, 23 Apr 2019 09:25:18 +0200, by Jan Mulder
-
feature: allow new saturation to be set in lower left corner bm-3Mon, 15 Apr 2019 17:35:47 +0200, by Jan Mulder
-
Buehlmann: trivial performance improvement (NDL) bm-3Fri, 12 Apr 2019 19:05:49 +0200, by Jan Mulder
-
Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3Fri, 12 Apr 2019 14:46:48 +0200, by Jan Mulder
-
Minor: Typo fixed in bootloader screen V1.4.7 releaseSat, 13 Apr 2019 14:36:33 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-2 (pull request #17)Fri, 12 Apr 2019 07:22:14 +0000, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-1 (pull request #16)Thu, 11 Apr 2019 10:26:22 +0000, by heinrichsweikamp
-
feature: replace Relative GF by saturation, computational only bm-1Tue, 09 Apr 2019 15:38:31 +0200, by Jan Mulder
-
add update files for testing purposesWed, 10 Apr 2019 11:04:56 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)Tue, 09 Apr 2019 08:52:44 +0000, by heinrichsweikamp
-
debug: add SPI error counter to compass calibration div-fixes-5Mon, 08 Apr 2019 12:35:59 +0200, by Jan Mulder
-
Comply to datasheet when resetting battery gauge registers div-fixes-5Mon, 08 Apr 2019 12:02:07 +0200, by Jan Mulder
-
cleanup: factor out I2C1_Status() and cleanup type div-fixes-5Mon, 08 Apr 2019 11:18:40 +0200, by Jan Mulder
-
cleanup: factor out dataSendToSlaveStopEval div-fixes-5Mon, 08 Apr 2019 10:35:29 +0200, by Jan Mulder
-
cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5Mon, 08 Apr 2019 10:16:17 +0200, by Jan Mulder
-
Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5Sat, 06 Apr 2019 20:35:21 +0200, by Jan Mulder
-
Minor: translating some comments and variable names into english, some cleanup in tComm.cSat, 06 Apr 2019 09:41:14 +0200, by heinrichsweikamp
-
add update files for testing purposesSat, 06 Apr 2019 09:11:39 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)Sat, 06 Apr 2019 07:01:21 +0000, by heinrichsweikamp
-
cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1Fri, 05 Apr 2019 09:12:04 +0200, by Jan Mulder
-
Bugfix: make date/time setting work over reboots div-fixes-4-1Wed, 03 Apr 2019 21:11:56 +0200, by Jan Mulder
-
cleanup: do not re-implement a standard function div-fixes-4-1Wed, 03 Apr 2019 14:33:12 +0200, by Jan Mulder
-
cleanup: make return void when never used div-fixes-4-1Wed, 03 Apr 2019 14:16:59 +0200, by Jan Mulder
-
cleanup: fix recent extra compiler warnings div-fixes-4-1Tue, 02 Apr 2019 15:11:42 +0200, by Jan Mulder
-
Bugfix: set battery percentage correctly after RTE update div-fixes-4-1Tue, 02 Apr 2019 14:53:15 +0200, by Jan Mulder
-
add update files for testing purposesTue, 02 Apr 2019 18:18:22 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)Mon, 01 Apr 2019 19:19:04 +0000, by heinrichsweikamp
-
Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3Sun, 31 Mar 2019 19:35:51 +0200, by Jan Mulder
-
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3Sun, 31 Mar 2019 15:14:06 +0200, by Jan Mulder
-
Bugfix: correct presentation error in tissues custom view div-fixes-3Fri, 29 Mar 2019 14:00:43 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)Mon, 01 Apr 2019 09:01:09 +0000, by heinrichsweikamp
-
Added schedule point for functions executed once in a second Improve_IPC_SyncSun, 31 Mar 2019 15:49:47 +0200, by ideenmodellierer
-
Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_SyncSun, 31 Mar 2019 15:44:12 +0200, by ideenmodellierer
-
Moved display refresh and button action function from tim callback to main loop Improve_IPC_SyncSun, 31 Mar 2019 15:39:44 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/edit-fix (pull request #11)Thu, 28 Mar 2019 13:05:29 +0000, by heinrichsweikamp
-
Bugfix, trivial: correctly present avg depth in overview custom edit-fixThu, 28 Mar 2019 09:54:29 +0100, by Jan Mulder
-
Bugfix: handle rounding of TTS and future TTS consistently edit-fixThu, 28 Mar 2019 08:26:17 +0100, by Jan Mulder
-
Bugfix, trivial: do not visit 9 on first digit for setpoint edit-fixWed, 27 Mar 2019 15:12:26 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/cv-persistent (pull request #10)Tue, 26 Mar 2019 22:23:26 +0000, by heinrichsweikamp
-
New feature: do not show sensor customviews when no sensors attached cv-persistentTue, 26 Mar 2019 16:02:22 +0100, by Jan Mulder
-
New feature: make selected customviews persistent cv-persistentTue, 26 Mar 2019 13:00:15 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)Sun, 24 Mar 2019 22:09:37 +0000, by heinrichsweikamp
-
Update SPI error display and handling ImprovmentSPISun, 24 Mar 2019 22:57:28 +0100, by ideenmodellierer
-
Moved EvaluateButton into 100ms callback ImprovmentSPISun, 24 Mar 2019 22:51:15 +0100, by ideenmodellierer
-
Deleted duplicated header file (keep the one stored in common) ImprovmentSPISun, 24 Mar 2019 22:48:49 +0100, by ideenmodellierer
-
merge forkSat, 23 Mar 2019 21:32:16 +0100, by Ideenmodellierer
-
Merged heinrichsweikamp/ostc4 into defaultSun, 17 Mar 2019 19:16:59 +0100, by Thorsten
-
Merged Cleanup_Compass_Wireless into defaultSat, 16 Mar 2019 19:58:52 +0000, by Thorsten
-
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)Fri, 22 Mar 2019 08:15:30 +0000, by heinrichsweikamp
-
Bugfix: fix initial CNS data in the logbook header div-fixes-cleaup-2Fri, 22 Mar 2019 08:36:39 +0100, by Jan Mulder
-
cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-2Thu, 21 Mar 2019 15:28:47 +0100, by Jan Mulder
-
cleanup: fix (harmless) use before assign div-fixes-cleaup-2Thu, 21 Mar 2019 11:41:59 +0100, by Jan Mulder
-
Bugfix, minor: color the overview customview correctly div-fixes-cleaup-2Wed, 20 Mar 2019 16:24:10 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)Tue, 19 Mar 2019 15:43:38 +0000, by heinrichsweikamp
-
cleanup: more trivial cleanup (logbook.c/h) div-fixes-cleanup-1Tue, 19 Mar 2019 11:42:00 +0100, by Jan Mulder
-
cleanup: remove unused include file t9.h div-fixes-cleanup-1Sat, 16 Mar 2019 21:02:10 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/avg-temp (pull request #6)Fri, 15 Mar 2019 15:48:53 +0000, by heinrichsweikamp
-
Bugfix: average temperature on arrival from RTE instead of display time avg-tempFri, 15 Mar 2019 15:04:57 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)Fri, 15 Mar 2019 12:55:58 +0000, by heinrichsweikamp
-
cleanup: forgotten cleanup from 9da7dd50e2ec cleanup-2Fri, 15 Mar 2019 12:53:14 +0100, by Jan Mulder
-
cleanup: remove obsolete code, make static, etc. cleanup-2Fri, 15 Mar 2019 12:39:28 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)Fri, 15 Mar 2019 08:22:16 +0000, by heinrichsweikamp
-
Cleanup compiler warnings Cleanup_Compass_WirelessThu, 14 Mar 2019 20:44:23 +0100, by ideenmodellierer
-
Cleanup compiler warnings Cleanup_Compass_WirelessThu, 14 Mar 2019 20:44:03 +0100, by ideenmodellierer
-
Resolve fixme comments Cleanup_Compass_WirelessThu, 14 Mar 2019 20:43:47 +0100, by ideenmodellierer
-
Removed not suppoted wireless feature Cleanup_Compass_WirelessWed, 13 Mar 2019 21:51:25 +0100, by ideenmodellierer
-
Removed not used compass code Cleanup_Compass_WirelessWed, 13 Mar 2019 21:49:25 +0100, by ideenmodellierer