ostc4: revision graph

graph

less more | rev 556: (0) -224 +224 tip

Switch source of o2 sensor data depending on availability of external ADC:
Thu, 12 Nov 2020 19:54:58 +0100, by Ideenmodellierer
Added HW_Info to Discovery <=> RTE data exchange:
Thu, 12 Nov 2020 19:48:28 +0100, by Ideenmodellierer
Added external ADC interface functionality (MCP3424):
Thu, 12 Nov 2020 19:46:03 +0100, by Ideenmodellierer
Added color indicator for focus state:
Sun, 08 Nov 2020 18:49:54 +0100, by Ideenmodellierer
Added menu structure to acces viewport calibration:
Sun, 08 Nov 2020 18:46:46 +0100, by Ideenmodellierer
Added viewport functionality:
Sun, 08 Nov 2020 18:43:19 +0100, by Ideenmodellierer
Make sure motion detection settings are set to default values:
Sun, 08 Nov 2020 18:38:53 +0100, by Ideenmodellierer
Only execute motion detection functions if features is enabled:
Sun, 08 Nov 2020 18:36:02 +0100, by Ideenmodellierer
Update roll and pitch value in simulation mode:
Sun, 08 Nov 2020 16:38:43 +0100, by Ideenmodellierer
Added viewport calibration to dive menu:
Mon, 02 Nov 2020 21:17:45 +0100, by Ideenmodellierer
Added new settings for Viewport:
Mon, 02 Nov 2020 21:15:42 +0100, by Ideenmodellierer
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
Tue, 03 Nov 2020 12:47:51 +0100, by heinrichsweikamp
add current build
Mon, 02 Nov 2020 12:13:02 +0100, by heinrichsweikamp
Shortend t3 view names:
Sun, 11 Oct 2020 18:33:19 +0200, by Ideenmodellierer
Added new t3 view showing first deco stop and tts in parallel:
Sat, 10 Oct 2020 21:02:05 +0200, by Ideenmodellierer
Added default view selection and auto return to view to t3 visualization:
Sat, 10 Oct 2020 18:34:10 +0200, by Ideenmodellierer
Bugfix return from submenu in t3 view:
Sat, 10 Oct 2020 18:30:13 +0200, by Ideenmodellierer
Added inertia simulation for compass heading:
Sat, 10 Oct 2020 16:59:18 +0200, by Ideenmodellierer
BugFix firmware downgrade to version with less settings:
Sat, 10 Oct 2020 13:51:44 +0200, by Ideenmodellierer
Added center / right alignment option to custom text display:
Wed, 07 Oct 2020 18:07:10 +0200, by Ideenmodellierer
Changed visualization of Depth / temperatur / debugview entry
Wed, 07 Oct 2020 17:15:27 +0200, by Ideenmodellierer
Increased max value for surface pressure:
Wed, 07 Oct 2020 17:12:44 +0200, by Ideenmodellierer
Added tag 1.5.5 release for changeset 02e7e11fdbe8
Sun, 04 Oct 2020 15:50:43 +0200, by heinrichsweikamp
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
Fri, 25 Sep 2020 11:13:03 +0200, by heinrichsweikamp
add current build
Wed, 16 Sep 2020 10:52:57 +0200, by heinrichsweikamp
Bugfix custom view selection dialog:
Tue, 15 Sep 2020 20:57:04 +0200, by Ideenmodellierer
Bugfix: No need to consider surface custom view in count of enabled view:
Tue, 15 Sep 2020 20:54:54 +0200, by Ideenmodellierer
Added skip condition in custom view selection:
Tue, 15 Sep 2020 20:52:39 +0200, by Ideenmodellierer
Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:59:38 +0200, by Ideenmodellierer
Do not show gases in "Off" state in custom gas list:
Sun, 13 Sep 2020 20:58:37 +0200, by Ideenmodellierer
Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:55:54 +0200, by Ideenmodellierer
Change color ID used in strings for light grey:
Sun, 13 Sep 2020 20:49:58 +0200, by Ideenmodellierer
Minor: Removed duplicated definition of number of available gases
Sun, 13 Sep 2020 20:44:50 +0200, by Ideenmodellierer
Changed string for data view selections:
Thu, 10 Sep 2020 20:52:47 +0200, by Ideenmodellierer
Added compile switch for motion control:
Thu, 10 Sep 2020 20:51:36 +0200, by Ideenmodellierer
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Thu, 10 Sep 2020 20:47:48 +0200, by Ideenmodellierer
Moved custom view menu to new tab:
Tue, 08 Sep 2020 21:24:14 +0200, by Ideenmodellierer
Reset Safety Stop display in case of a new descend:
Sun, 06 Sep 2020 22:11:51 +0200, by Ideenmodellierer
Added T3_gaslist:
Sun, 06 Sep 2020 21:17:59 +0200, by Ideenmodellierer
Added color coding for cv gas list:
Sun, 06 Sep 2020 21:15:34 +0200, by Ideenmodellierer
Added quick menu function to big font view:
Sun, 06 Sep 2020 21:13:22 +0200, by Ideenmodellierer
Added missing display of button labels in refresh function:
Sun, 06 Sep 2020 21:09:37 +0200, by Ideenmodellierer
Properly send compass 3 into sleepmode (end-2019 hardware)
Wed, 16 Sep 2020 10:30:28 +0200, by heinrichsweikamp
Merge
Mon, 31 Aug 2020 20:06:59 +0200, by heinrichsweikamp
Added new strings for the selection of T3 custom views
Sun, 30 Aug 2020 17:31:29 +0200, by Ideenmodellierer
Minor adaptions in page layout:
Sun, 30 Aug 2020 17:30:54 +0200, by Ideenmodellierer
Display warning in t7 using centered strings
Sun, 30 Aug 2020 17:26:52 +0200, by Ideenmodellierer
Show page number in small letters if more than 8 tabs are active
Sun, 30 Aug 2020 17:26:00 +0200, by Ideenmodellierer
Reimplementation of tMenuEdit_select:
Sun, 30 Aug 2020 17:23:44 +0200, by Ideenmodellierer
Added new menu tab into call structure
Sun, 30 Aug 2020 17:20:16 +0200, by Ideenmodellierer
Added new top level menu for customization of views
Sun, 30 Aug 2020 17:19:23 +0200, by Ideenmodellierer
Removed second big font profile
Sun, 30 Aug 2020 17:14:31 +0200, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
Added compile switch to enable / disable new BigFont layout
Mon, 24 Aug 2020 19:31:05 +0200, by Ideenmodellierer
Added dew parameter to enable selection of customer BigFont screens to be displayed
Mon, 24 Aug 2020 19:30:15 +0200, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
Added compiler switch for existing debug view parameter
Thu, 20 Aug 2020 21:25:38 +0200, by Ideenmodellierer
Added tag v1.5.4 release for changeset e9ca66ce36e5
Mon, 10 Aug 2020 15:53:45 +0200, by heinrichsweikamp
1.5.4 release v1.5.4 release
Wed, 22 Jul 2020 11:55:53 +0200, by heinrichsweikamp
add wiki sub-directory
Mon, 29 Jun 2020 16:18:17 +0200, by heinrichsweikamp
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
Sat, 27 Jun 2020 18:40:32 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
Tue, 26 May 2020 19:27:07 +0000, by heinrichsweikamp
Bugfix header EEPROM layout: FixLayout_Header_LogView
Tue, 26 May 2020 21:13:12 +0200, by ideenmodellierer
Bugfix right alignment of string: FixLayout_Header_LogView
Tue, 26 May 2020 21:13:00 +0200, by ideenmodellierer
Small corrections layout Divelog page 1: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:46 +0200, by ideenmodellierer
Development option only read bottledata: FixLayout_Header_LogView
Tue, 26 May 2020 21:12:02 +0200, by ideenmodellierer
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
Tue, 19 May 2020 07:27:18 +0000, by heinrichsweikamp
Bugfix calculation of string center position: Improve_Button_Sleep
Mon, 18 May 2020 21:51:08 +0200, by ideenmodellierer
Code cleanup pressure plausibility check: Improve_Button_Sleep
Wed, 13 May 2020 21:56:35 +0200, by ideenmodellierer
Bugfix unintended else condition: Improve_Button_Sleep
Wed, 13 May 2020 21:27:30 +0200, by ideenmodellierer
Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep
Tue, 12 May 2020 23:03:50 +0200, by ideenmodellierer
Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep
Tue, 12 May 2020 23:03:29 +0200, by ideenmodellierer
Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep
Tue, 12 May 2020 22:54:19 +0200, by ideenmodellierer
Changed default values: Improve_Button_Sleep
Tue, 12 May 2020 22:52:05 +0200, by ideenmodellierer
Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep
Tue, 12 May 2020 22:42:52 +0200, by ideenmodellierer
Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep
Tue, 12 May 2020 22:39:18 +0200, by ideenmodellierer
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
Tue, 28 Apr 2020 15:37:47 +0000, by heinrichsweikamp
bugfix: implement battery charge percentage in dive header fix-bat-2
Wed, 22 Apr 2020 13:08:57 +0200, by Jan Mulder
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
Wed, 15 Apr 2020 07:01:11 +0000, by heinrichsweikamp
Removed no longer needed reset profile function: Improve_Logtansfer
Tue, 14 Apr 2020 19:45:34 +0200, by ideenmodellierer
Moved and deactivated analyse sample buffer switch: Improve_Logtansfer
Tue, 14 Apr 2020 19:44:19 +0200, by ideenmodellierer
Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer
Tue, 14 Apr 2020 19:29:23 +0200, by ideenmodellierer
Removed invalidate header function because it is no lonnger needed Improve_Logtansfer
Tue, 14 Apr 2020 19:27:04 +0200, by ideenmodellierer
Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer
Tue, 14 Apr 2020 19:22:56 +0200, by ideenmodellierer
Added compile switch to handle additional data during raw header request: Improve_Logtansfer
Mon, 13 Apr 2020 16:00:54 +0200, by ideenmodellierer
Added function to transfer sample buffer: Improve_Logtansfer
Sun, 12 Apr 2020 21:02:34 +0200, by ideenmodellierer
Power-down Bluetooth on COMM exit
Wed, 08 Apr 2020 16:34:54 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
Mon, 30 Mar 2020 13:16:11 +0000, by heinrichsweikamp
merged default into minor_improvments minor_improvments
Sun, 29 Mar 2020 21:55:00 +0200, by Ideenmodellierer
Activated reset of sample information within header data at time of sector erasing: minor_improvments
Sun, 29 Mar 2020 21:39:57 +0200, by ideenmodellierer
Added ppO2 to dummy profile data: minor_improvments
Sat, 28 Mar 2020 21:41:47 +0100, by ideenmodellierer
Eliminated some minor warnings minor_improvments
Tue, 24 Mar 2020 22:32:48 +0100, by ideenmodellierer
Transfer a dummy profile in case of missing sample information: minor_improvments
Tue, 24 Mar 2020 22:14:16 +0100, by ideenmodellierer
Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 22:12:08 +0100, by ideenmodellierer
Reactivated samples for bottle pressure information: minor_improvments
Tue, 24 Mar 2020 22:08:29 +0100, by ideenmodellierer
Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:59:38 +0100, by ideenmodellierer
Added compile variant enabling the reset of profile sample information: minor_improvments
Tue, 24 Mar 2020 21:59:11 +0100, by ideenmodellierer
Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
Tue, 24 Mar 2020 21:49:52 +0100, by ideenmodellierer
Added new compile switches for variants: minor_improvments
Tue, 24 Mar 2020 21:48:27 +0100, by ideenmodellierer
Added initialization of bottle sensor data age counter minor_improvments
Mon, 23 Mar 2020 21:14:54 +0100, by ideenmodellierer
Added compile switch to show voltage parallel to charge status percantage minor_improvments
Mon, 23 Mar 2020 21:13:52 +0100, by ideenmodellierer
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
Mon, 23 Mar 2020 21:10:02 +0100, by ideenmodellierer
Introduced configuration header for variant managment: minor_improvments
Thu, 05 Mar 2020 22:31:50 +0100, by ideenmodellierer
Removed duplicated definition: minor_improvments
Thu, 05 Mar 2020 22:27:55 +0100, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:27:29 +0100, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:27:04 +0100, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
Sat, 29 Feb 2020 22:25:20 +0100, by ideenmodellierer
fix potential issue with >255 dives in the logbook
Sun, 01 Mar 2020 10:06:45 +0100, by heinrichsweikamp
Added tag v1.5.3 release for changeset 5b4c78c36b04
Thu, 27 Feb 2020 09:13:25 +0100, by heinrichsweikamp
1.5.3 release v1.5.3 release
Thu, 27 Feb 2020 09:13:08 +0100, by heinrichsweikamp
update the 1.5.3 for tests
Mon, 24 Feb 2020 15:17:54 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
Mon, 24 Feb 2020 07:58:37 +0000, by heinrichsweikamp
Moved power on detection to RTE: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:18:49 +0100, by ideenmodellierer
Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:17:17 +0100, by ideenmodellierer
Reduced timeout for common UART communication: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:13:28 +0100, by ideenmodellierer
Detect startup after power off: Improve_BatteryGasGauge
Sun, 23 Feb 2020 21:09:56 +0100, by ideenmodellierer
show battery percent and voltage and surfacemode. That gives additional
Tue, 18 Feb 2020 12:41:45 +0100, by heinrichsweikamp
make a 1.5.3 for tests
Tue, 18 Feb 2020 09:58:52 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
Tue, 18 Feb 2020 07:20:29 +0000, by heinrichsweikamp
Marked possible code improvment for future activities: ImprovmentNVM_2
Mon, 17 Feb 2020 19:43:09 +0100, by ideenmodellierer
Activated ringbuffer for settings: ImprovmentNVM_2
Mon, 17 Feb 2020 19:04:10 +0100, by ideenmodellierer
Activated ringbuffer for settings: ImprovmentNVM_2
Sun, 16 Feb 2020 22:04:52 +0100, by ideenmodellierer
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
Sat, 15 Feb 2020 20:50:58 +0100, by ideenmodellierer
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
Sat, 15 Feb 2020 20:50:20 +0100, by ideenmodellierer
Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2
Sat, 15 Feb 2020 20:45:19 +0100, by ideenmodellierer
ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2
Mon, 10 Feb 2020 19:40:33 +0100, by ideenmodellierer
Moved Timeout handling out of 100ms callback: ImprovmentNVM_2
Mon, 10 Feb 2020 19:29:12 +0100, by ideenmodellierer
Enable sequentionel writing of device data: ImprovmentNVM_2
Mon, 10 Feb 2020 19:25:09 +0100, by ideenmodellierer
Optimize ef_write_block function: ImprovmentNVM_2
Mon, 10 Feb 2020 19:15:27 +0100, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
Mon, 10 Feb 2020 08:23:15 +0000, by heinrichsweikamp
Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
Fri, 07 Feb 2020 16:38:11 +0100, by Jan Mulder
1.5.2 beta with RTE 2.02 v1.5.2.beta release
Wed, 15 Jan 2020 13:41:01 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
Wed, 15 Jan 2020 10:53:15 +0000, by heinrichsweikamp
merged default into Improvment_NVM Improment_NVM
Tue, 14 Jan 2020 21:52:15 +0100, by Ideenmodellierer
Added compile switch for restoring of last known date after power lost: Improment_NVM
Tue, 14 Jan 2020 21:38:45 +0100, by ideenmodellierer
Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
Tue, 14 Jan 2020 21:10:37 +0100, by ideenmodellierer
Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
Tue, 14 Jan 2020 21:08:45 +0100, by ideenmodellierer
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
Mon, 13 Jan 2020 20:27:57 +0100, by ideenmodellierer
Bugfix display compass calibration frozen: Improment_NVM
Sun, 12 Jan 2020 21:33:13 +0100, by ideenmodellierer
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
Sun, 12 Jan 2020 19:55:22 +0100, by ideenmodellierer
Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
Sun, 12 Jan 2020 19:50:14 +0100, by ideenmodellierer
Bugfix parallel call of external flash functions: Improment_NVM
Sun, 12 Jan 2020 18:06:59 +0100, by ideenmodellierer
Bugfix Min max values for device data checks: Improment_NVM
Sun, 12 Jan 2020 17:57:11 +0100, by ideenmodellierer
Bugfix Display of Sensor values: Improment_NVM
Sun, 12 Jan 2020 17:47:02 +0100, by ideenmodellierer
Bugfix: display of time of minimum voltag: Improment_NVM
Sun, 12 Jan 2020 17:45:36 +0100, by ideenmodellierer
We got one report of false/freezd depth reading when jumping into 2m depth
Wed, 08 Jan 2020 15:35:15 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
Sun, 05 Jan 2020 14:57:50 +0000, by heinrichsweikamp
merged default into ImproveBluetooth ImproveBluetooth
Sun, 29 Dec 2019 09:42:16 +0100, by Ideenmodellierer
Added retry through power off/on cycle: ImproveBluetooth
Sat, 28 Dec 2019 19:42:04 +0100, by ideenmodellierer
Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
Sat, 21 Dec 2019 20:21:26 +0100, by ideenmodellierer
Bugfix: Merge / cleanup problem: ImproveBluetooth
Mon, 02 Dec 2019 22:03:05 +0100, by ideenmodellierer
Added missing enum for configuration states ImproveBluetooth
Sun, 01 Dec 2019 19:55:15 +0100, by ideenmodellierer
Added function for BlueMod configuration: ImproveBluetooth
Tue, 26 Nov 2019 22:12:25 +0100, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:17:57 +0100, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:16:36 +0100, by ideenmodellierer
Configurate FlowCntrl Pins as noPull ImproveBluetooth
Tue, 26 Nov 2019 21:14:58 +0100, by ideenmodellierer
Bugfix negativ ascend bar: ImproveBluetooth
Tue, 26 Nov 2019 18:13:26 +0100, by ideenmodellierer
Move Constants and libm to start of firmware ROM block: ImproveBluetooth
Tue, 26 Nov 2019 18:02:48 +0100, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
Mon, 02 Dec 2019 07:56:47 +0000, by heinrichsweikamp
Fix case for case sensitive OS maintain-1
Sun, 01 Dec 2019 17:28:35 +0100, by Jan Mulder
Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
Sun, 01 Dec 2019 17:12:27 +0100, by Jan Mulder
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
Sun, 24 Nov 2019 15:46:58 +0000, by heinrichsweikamp
Added key direction awarness to t3, t5 and t6 views: MotionDetection
Mon, 21 Oct 2019 21:16:53 +0200, by ideenmodellierer
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
Mon, 21 Oct 2019 18:37:43 +0200, by ideenmodellierer
Consider number of available t3 views in sector handling: MotionDetection
Thu, 17 Oct 2019 23:09:17 +0200, by ideenmodellierer
Combine variables in a structure to improve readability of code MotionDetection
Thu, 17 Oct 2019 21:15:42 +0200, by ideenmodellierer
merge default MotionDetection
Thu, 10 Oct 2019 22:26:03 +0200, by Ideenmodellierer
Simplified pitch detection state machine: MotionDetection
Thu, 10 Oct 2019 22:11:59 +0200, by ideenmodellierer
Minor code cleanup MotionDetection
Thu, 10 Oct 2019 22:09:52 +0200, by ideenmodellierer
Added missing customerview selection MotionDetection
Mon, 16 Sep 2019 22:49:34 +0200, by ideenmodellierer
Incremented "idle window" for scroll detection MotionDetection
Mon, 16 Sep 2019 22:46:24 +0200, by ideenmodellierer
Motion events effect custom view in dive mode only MotionDetection
Mon, 16 Sep 2019 20:57:40 +0200, by ideenmodellierer
Added string for Empty/ Debug custom view selection MotionDetection
Mon, 16 Sep 2019 20:21:06 +0200, by ideenmodellierer
Use Enum values for initialization and setting check: MotionDetection
Tue, 10 Sep 2019 20:51:55 +0200, by ideenmodellierer
Removed some warnings MotionDetection
Sun, 08 Sep 2019 13:45:43 +0200, by ideenmodellierer
Add scroll event by pitch angle detection: MotionDetection
Sun, 08 Sep 2019 13:45:17 +0200, by ideenmodellierer
merged default into MotionDetection MotionDetection
Mon, 19 Aug 2019 17:50:55 +0200, by Ideenmodellierer
Added parameter for number of sectors to be defined MotionDetection
Mon, 19 Aug 2019 17:39:47 +0200, by ideenmodellierer
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
Tue, 13 Aug 2019 21:13:54 +0200, by ideenmodellierer
Added a function to count the active custom views. MotionDetection
Tue, 13 Aug 2019 21:12:17 +0200, by ideenmodellierer
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
Tue, 13 Aug 2019 21:10:46 +0200, by ideenmodellierer
Merge default MotionDetection
Sat, 20 Jul 2019 21:42:45 +0200, by Ideenmodellierer
Fix misalignment of do while loop MotionDetection
Mon, 17 Jun 2019 19:56:38 +0200, by ideenmodellierer
Bugfix: selection of current view not working MotionDetection
Mon, 17 Jun 2019 19:53:01 +0200, by ideenmodellierer
Update call of motion detection function MotionDetection
Mon, 17 Jun 2019 19:47:07 +0200, by ideenmodellierer
Reworked detection function MotionDetection
Mon, 17 Jun 2019 19:46:18 +0200, by ideenmodellierer
Parameter update MotionDetection
Tue, 11 Jun 2019 05:31:07 +0200, by Ideenmodellierer
Pass action to customer vie update function. MotionDetection
Tue, 11 Jun 2019 05:30:09 +0200, by Ideenmodellierer
Added trigger of middle button action in case of a detected shake MotionDetection
Fri, 24 May 2019 22:01:46 +0200, by ideenmodellierer
Added new files for motion detection (shaking) detection MotionDetection
Fri, 24 May 2019 22:00:38 +0200, by ideenmodellierer
Add Support for new end-2019 hardware:
Sun, 24 Nov 2019 16:08:29 +0100, by heinrichsweikamp
Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 18:39:50 +0100, by heinrichsweikamp
Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 15:36:38 +0100, by heinrichsweikamp
Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
Wed, 09 Oct 2019 20:05:47 +0200, by heinrichsweikamp
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
Wed, 09 Oct 2019 07:08:43 +0000, by heinrichsweikamp
Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
Tue, 08 Oct 2019 16:41:57 +0200, by Jan Mulder
Fix merge problem fix-merge-mess
Tue, 08 Oct 2019 16:35:45 +0200, by Jan Mulder
Merge
Sun, 06 Oct 2019 14:12:41 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
Sun, 06 Oct 2019 11:58:36 +0000, by heinrichsweikamp
Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
Thu, 03 Oct 2019 21:39:28 +0200, by ideenmodellierer
Minor changes to debug view FlightMode_Improvment
Thu, 03 Oct 2019 21:34:52 +0200, by ideenmodellierer
Added option to manually leave dive mode to system menu FlightMode_Improvment
Thu, 03 Oct 2019 21:33:47 +0200, by ideenmodellierer
Added function to support manuel exit of dive mode FlightMode_Improvment
Thu, 03 Oct 2019 21:30:16 +0200, by ideenmodellierer
Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
Thu, 03 Oct 2019 21:26:46 +0200, by ideenmodellierer
Removed not used wireless menu items FlightMode_Improvment
Tue, 01 Oct 2019 19:58:58 +0200, by ideenmodellierer
Added compile switch to enable debug view option in system menu FlightMode_Improvment
Tue, 01 Oct 2019 19:43:30 +0200, by ideenmodellierer
Removed averaging of pressure and temperatur values FlightMode_Improvment
Tue, 01 Oct 2019 19:13:41 +0200, by ideenmodellierer
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
Sun, 06 Oct 2019 14:07:51 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
Mon, 19 Aug 2019 11:42:31 +0000, by heinrichsweikamp
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment
Sat, 17 Aug 2019 19:03:47 +0200, by ideenmodellierer
Added function to avoid divemode activation during Landing: PressureMeasure_Improvment
Sat, 17 Aug 2019 18:57:15 +0200, by ideenmodellierer
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment
Sat, 17 Aug 2019 18:47:08 +0200, by ideenmodellierer
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment
Sat, 17 Aug 2019 18:44:43 +0200, by ideenmodellierer
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment
Tue, 13 Aug 2019 21:46:26 +0200, by ideenmodellierer
building a 1.5 v1.5.0 release
Sun, 04 Aug 2019 11:01:06 +0200, by heinrichsweikamp
add update files for testing purposes
Sat, 20 Jul 2019 10:44:01 +0200, by heinrichsweikamp

less more | rev 556: (0) -224 +224 tip

Mercurial > public > ostc4

graph