Mercurial > public > ostc4
graph
-
Add a line to the compass heading dive menu that shows the currently set heading to enable the Evo_2_232 weeks ago, by heinrichsweikamp
-
Bugfix de-/activation of deco stop consideration in simulator: Evo_2_232 months ago, by ideenmodellierer
-
Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_233 months ago, by Ideenmodellierer
-
Added first time initialization for new bluetooth module: Evo_2_234 months ago, by Ideenmodellierer
-
Zusammenf?hren5 months ago, by heinrichsweikamp
-
When opening the logbook, or scrolling inside a logbook page,5 months ago, by heinrichsweikamp
-
Fix incorrect logging of bailout to Open Circuit when using the best gas.5 months ago, by heinrichsweikamp
-
Check line enable/disable state when a new page is selected: Evo_2_239 months ago, by Ideenmodellierer
-
Minor: Remove absolute paths from the reference project files10 months ago, by heinrichsweikamp
-
Consider pressure offset compensation in case of setting a default value: Evo_2_2311 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_2312 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_2313 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not: Evo_2_2313 months ago, by Ideenmodellierer
-
Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_2313 months ago, by Ideenmodellierer
-
Bugfix Line order of info screen with flip screen active: Evo_2_2314 months ago, by Ideenmodellierer
-
Bugfix Flipscreen visualization:14 months ago, by Ideenmodellierer
-
User Test14 months ago, by heinrichsweikamp
-
1.6.5 release15 months ago, by heinrichsweikamp
-
Split definition of custom views:15 months ago, by Ideenmodellierer
-
Added debug information in case an error in the settings has been detected:15 months ago, by Ideenmodellierer
-
1.6.4 release15 months ago, by heinrichsweikamp
-
Testing build15 months ago, by heinrichsweikamp
-
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)15 months ago, by heinrichsweikamp
-
Bugfix CustomView selection during dive mode:15 months ago, by Ideenmodellierer
-
Dev Bugfix: O2 values of new detected sensors were shown as invalid:15 months ago, by Ideenmodellierer
-
Used real sensor state in simulation:15 months ago, by Ideenmodellierer
-
Testing build15 months ago, by heinrichsweikamp
-
Added function to skip lines which are not needed for operation:16 months ago, by Ideenmodellierer
-
Only jump to Sensor view during charging if sensors are connected:16 months ago, by Ideenmodellierer
-
DevBugfix CO2 sensor in streaming mode:16 months ago, by Ideenmodellierer
-
Testing build16 months ago, by heinrichsweikamp
-
Zusammenf?hren16 months ago, by heinrichsweikamp
-
Update Firmware version number16 months ago, by heinrichsweikamp
-
Adds a simple countdown timer, available as a custom view in surface and dive mode.16 months ago, by heinrichsweikamp
-
Cleanup initialisation code:16 months ago, by Ideenmodellierer
-
Cleanup initialisation / deinitialization:16 months ago, by Ideenmodellierer
-
Removed dependency to protocol setting:16 months ago, by Ideenmodellierer
-
Update RTE version number16 months ago, by Ideenmodellierer
-
Cleanup warnings16 months ago, by Ideenmodellierer
-
Added CO2 mirrow instance:16 months ago, by Ideenmodellierer
-
Migrated CO2 protocol implementation to new format:16 months ago, by Ideenmodellierer
-
Use mirror sensortype for visualization:17 months ago, by Ideenmodellierer
-
Expanded Sensor map structure:17 months ago, by Ideenmodellierer
-
Moved DiveO2 sensor specific funtionality into separated file:17 months ago, by Ideenmodellierer
-
Restructure UART based sensor handling:17 months ago, by Ideenmodellierer
-
Bugfix PSCR Settings in Simulator Mode:17 months ago, by Ideenmodellierer
-
update current build for testing16 months ago, by heinrichsweikamp
-
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.17 months ago, by heinrichsweikamp
-
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.17 months ago, by heinrichsweikamp
-
Dev Bugfx Empty buffer indication and stability improvments:18 months ago, by Ideenmodellierer
-
Cleanup sensor data interface:18 months ago, by Ideenmodellierer
-
Change support from Pyroscience -> DiveO2 sensors19 months ago, by heinrichsweikamp
-
Bugfixloop UART multiplexer integration:19 months ago, by Ideenmodellierer
-
Update digital O2 sensor information:19 months ago, by Ideenmodellierer
-
Sensor status support for multiplexed DiveO2 sensors:19 months ago, by Ideenmodellierer
-
Update real multiplexer implementation:19 months ago, by Ideenmodellierer
-
Discovery<=>SmallCPU inferface update:19 months ago, by Ideenmodellierer
-
Added UART multiplexer support for DiveO2:19 months ago, by Ideenmodellierer
-
Zusammenf?hren19 months ago, by heinrichsweikamp
-
Add support for a configurable compass declination in a range of -99 to 99 degrees.19 months ago, by heinrichsweikamp
-
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)19 months ago, by heinrichsweikamp
-
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.20 months ago, by heinrichsweikamp
-
1.6.2 release20 months ago, by heinrichsweikamp
-
Update build for testing20 months ago, by heinrichsweikamp
-
change button default responsiveness to 10020 months ago, by heinrichsweikamp
-
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.20 months ago, by heinrichsweikamp
-
Update build for testing21 months ago, by heinrichsweikamp
-
increase HAL_Delay to 10ms for cold-start-button reset21 months ago, by heinrichsweikamp
-
Preparing a 1.6.2 release candidate21 months ago, by heinrichsweikamp
-
Fix/handle negative scrubber timer values21 months ago, by heinrichsweikamp
-
Quit simualted dives after the dive time set in the SIM tab.21 months ago, by heinrichsweikamp
-
Some compass improvements from mikeller21 months ago, by heinrichsweikamp
-
- Colours for scrubber display when time remaining falls below a threshold value21 months ago, by heinrichsweikamp
-
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:21 months ago, by Ideenmodellierer
-
Added visualization of CO2 during dive:21 months ago, by Ideenmodellierer
-
Cleanup display of multiple warnings in T3 (Big font) view:21 months ago, by Ideenmodellierer
-
Only show autodetection in sensor menu if external interface is present:21 months ago, by Ideenmodellierer
-
Updated outdated comment21 months ago, by Ideenmodellierer
-
Dev Bugfix: Alignment problem in lifedata structure:21 months ago, by Ideenmodellierer
-
resolv merge21 months ago, by Ideenmodellierer
-
Avoid blinking in customer view selection page:21 months ago, by Ideenmodellierer
-
Added enum for Co2 display21 months ago, by Ideenmodellierer
-
Added display of co2 ppm values:21 months ago, by Ideenmodellierer
-
Added pressure compensation to CO2 detection:21 months ago, by Ideenmodellierer
-
Code cleanup sensors under development:22 months ago, by Ideenmodellierer
-
Update Sentinel protocol:22 months ago, by Ideenmodellierer
-
Added DiveO2 fatal error detection:22 months ago, by Ideenmodellierer
-
Enable start dive in Big font display:22 months ago, by Ideenmodellierer
-
Update Sentinel protocol:22 months ago, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:22 months ago, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:22 months ago, by Ideenmodellierer
-
Enable start dive in Big font display:22 months ago, by Ideenmodellierer
-
Added data init function for external interface:22 months ago, by Ideenmodellierer
-
NEW: Add mini compass with marker declination indication21 months ago, by heinrichsweikamp
-
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas22 months ago, by heinrichsweikamp
-
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas22 months ago, by heinrichsweikamp
-
Removed interface selection from sensor menu:23 months ago, by Ideenmodellierer
-
Optical sensor as default:23 months ago, by Ideenmodellierer
-
Fix compiler switch:23 months ago, by Ideenmodellierer
-
Improvment sensor Autodetection:23 months ago, by Ideenmodellierer
-
Update sensor menu support for automatic sensor detection:23 months ago, by Ideenmodellierer
-
Added auto detection functionality for sensors connected to the external interface:23 months ago, by Ideenmodellierer
-
Added sensor map to Firmware <=> RTE inferface:23 months ago, by Ideenmodellierer
-
Enabled CO2 support for beta test phase:23 months ago, by Ideenmodellierer
-
Bugfix data synchronization after RTE start:23 months ago, by Ideenmodellierer
-
Update CO2 sensor implementation:23 months ago, by Ideenmodellierer
-
Development feature: external pressure sensor23 months ago, by Ideenmodellierer
-
DigO2 added raw data request:23 months ago, by Ideenmodellierer
-
Show saturation in large font (T3) view:23 months ago, by Ideenmodellierer
-
DigO2 added raw data request:23 months ago, by Ideenmodellierer
-
Bugfix set date (year):23 months ago, by Ideenmodellierer
-
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)2022-11-27, by heinrichsweikamp
-
Updated menu structure to support new sensor information page:2022-11-20, by Ideenmodellierer
-
Added new info page for extended sensor data:2022-11-20, by Ideenmodellierer
-
Added customizable data area for specific sensor data:2022-11-20, by Ideenmodellierer
-
Increased version number and set beta label2022-11-20, by Ideenmodellierer
-
Added customizable data area for specific sensor data:2022-11-20, by Ideenmodellierer
-
Increased version number and set beta label2022-11-20, by Ideenmodellierer
-
Bugfix PSCR menu button label:2022-11-20, by Ideenmodellierer
-
Development bugfix number of spare bytes in setting structure2022-11-08, by Ideenmodellierer
-
Extension scrubber time:2022-11-08, by Ideenmodellierer
-
Bugfix compass bearing:2022-11-08, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:2022-11-03, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:2022-11-03, by Ideenmodellierer
-
Bugfix: only reset menu if a new sub menu is created:2022-11-03, by Ideenmodellierer
-
Bugfix release frame:2022-11-01, by Ideenmodellierer
-
Added protocol functions for UART DiveO2 sensor:2022-10-28, by Ideenmodellierer
-
Added selection of digital o2 sensor source to HW menu:2022-10-28, by Ideenmodellierer
-
Added digital o2 sensor to settings and data exchange:2022-10-28, by Ideenmodellierer
-
Bugfix display of deactivated sensors:2022-10-28, by Ideenmodellierer
-
Bugfix motioncontrol frame deactivation:2022-10-18, by Ideenmodellierer
-
Cleanup warnings:2022-10-18, by Ideenmodellierer
-
Bugfix Empty menu:2022-09-25, by Ideenmodellierer
-
Improvment key event detection:2022-09-25, by Ideenmodellierer
-
Merge2022-08-19, by heinrichsweikamp
-
Bugfix: Set actual gas after basic dive settings were created: Betatest2022-05-16, by Ideenmodellierer
-
Reduce display brightness in case the charger is connected: Betatest2022-03-12, by Ideenmodellierer
-
Undo Rev. 6602021-11-01, by heinrichs weikamp
-
Add option to reset bluetooth name2021-08-08, by heinrichsweikamp
-
Update build file for testing2021-04-28, by heinrichs weikamp
-
Bugfix handling of new menu tab in flipped mode:2021-04-27, by Ideenmodellierer
-
Update release date2021-04-26, by heinrichs weikamp
-
Added visualization of scrubber time:2021-04-25, by Ideenmodellierer
-
Added count down timer for scrubber time:2021-04-25, by Ideenmodellierer
-
Introduced new menu tab for addition CCR options:2021-04-25, by Ideenmodellierer
-
Bugfix temperature display Logpage2:2021-04-25, by Ideenmodellierer
-
Allow setpoint starting at 0.4 ppO2:2021-04-19, by Ideenmodellierer
-
Automatik setpoint change:2021-04-19, by Ideenmodellierer
-
Automatik setpoint change:2021-04-19, by Ideenmodellierer
-
Bugfix consider checkbox in calculation of right aligned and centered position:2021-04-19, by Ideenmodellierer
-
Motion detection: Enable focus after focus calibration:2021-04-19, by Ideenmodellierer
-
Integrated selection of bailout in the diluent selection page:2021-04-13, by Ideenmodellierer
-
Remove battery charge counter from information menu:2021-04-13, by Ideenmodellierer
-
Small changes in charger state handling:2021-04-13, by Ideenmodellierer
-
Compile with ENABLE_CHARGER_STATUS_V22021-03-30, by heinrichs weikamp
-
Reimplemented charger status generation (deactivated):2021-03-24, by Ideenmodellierer
-
Do not show focus indicator in case motion detection is suspended:2021-03-24, by Ideenmodellierer
-
Development Bugfix Deco bars not shown after last deco stop passed:2021-03-11, by Ideenmodellierer
-
Development bugfix Viewport settings:2021-03-11, by Ideenmodellierer
-
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.62021-02-25, by heinrichsweikamp
-
Added last measured PPO2 value to sensor selection dialog:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Enable sensor check for Analog PPO2 mode:2021-02-24, by Ideenmodellierer
-
Added menu structure to allow ppo2 modification in simulator mode:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Added functionality to add ppo2 mV offset:2021-02-23, by Ideenmodellierer
-
Added compile switch for T3_PROFILE menu operation option2021-02-12, by Ideenmodellierer
-
Improve in / out of focus transitions:2021-02-12, by Ideenmodellierer
-
Added option to select sensitivity of focus detection:2021-02-12, by Ideenmodellierer
-
Switch Sector / Scroll detection to vector implementation:2021-02-08, by Ideenmodellierer
-
Development bugfix: Marker in standard t3 view drawn in wrong direction2021-02-07, by Ideenmodellierer
-
Improvment frame Handling:2021-02-07, by Ideenmodellierer
-
Adjustments for flipped display view:2021-02-03, by Ideenmodellierer
-
Use roll and pitch agles in 0-360 format:2021-02-03, by Ideenmodellierer
-
Added minilog functions to allow marker synchronisation:2021-01-27, by Ideenmodellierer
-
Added t3 quick menu for marker synchronisation:2021-01-27, by Ideenmodellierer
-
Development bugfix: focus state not remembered:2021-01-27, by Ideenmodellierer
-
Development bugfix: Low battery warning was interpretated as marker:2021-01-27, by Ideenmodellierer
-
Development bugfix: show replay symbol only for the selected dive:2021-01-27, by Ideenmodellierer
-
Moved non critical functions from timer interrupt to main loop:2021-01-27, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:2021-01-20, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:2021-01-15, by Ideenmodellierer
-
Bugfix inverted whitspace:2021-01-15, by Ideenmodellierer
-
Suspend MotionDetection events while diver is operationg the OSTC:2021-01-14, by Ideenmodellierer
-
Added access to logbook marker data:2021-01-14, by Ideenmodellierer
-
Bugfix: CalibViewport were shown even in case the compile switch had not been set:2021-01-14, by Ideenmodellierer
-
Update RTE required value for release2021-02-05, by heinrichsweikamp
-
Added tag v1.5.6 release for changeset 06ec1da5e1052021-02-05, by heinrichsweikamp
-
change O2_CALIB_FRACTION_O2 to 0.982021-01-07, by heinrichsweikamp
-
Merged menu items of viewport and motion control:2021-01-06, by Ideenmodellierer
-
T3 profile view: Added visualization of deco data2021-01-06, by Ideenmodellierer
-
Added replay data scaling in case life data is longer than replay block2021-01-05, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:2021-01-04, by Ideenmodellierer
-
Added compile switch for new T3 View Profile2021-01-04, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:2021-01-04, by Ideenmodellierer
-
New replay block for T3 profile:2021-01-04, by Ideenmodellierer
-
MotionControl-Sector: Map sectors during switch T7 <=> T3:2021-01-04, by Ideenmodellierer
-
Added functionality to select a dive to be shown in the T3 profile view:2021-01-04, by Ideenmodellierer
-
Bugfix Selection of primary view:2021-01-04, by Ideenmodellierer
-
Added compile switch for new T3 View Profile2021-01-04, by Ideenmodellierer
-
Added PrintGraph option to skip invalid data entries:2021-01-04, by Ideenmodellierer
-
MotionCtrl - Sectorview Map sectors directly to custom views:2021-01-03, by Ideenmodellierer
-
Minor: Comment translation into English2021-01-06, by heinrichsweikamp
-
Align VPM tag in log list to be at same position as GF tag:2020-12-22, by Ideenmodellierer
-
Minor: Update the documentation for building the code2020-12-17, by heinrichsweikamp
-
Update current build, "RTErequired" value and release date2020-12-17, by heinrichsweikamp
-
update ostc4pack sample files2020-12-16, by heinrichsweikamp
-
Motion control: Jump back to primary view if focus is lost:2020-12-13, by Ideenmodellierer
-
Reduced view angle and number of vusiualized custom views in setor mode:2020-12-13, by Ideenmodellierer
-
Added option for 100% o2 calibration:2020-12-12, by Ideenmodellierer
-
Solved minor warnings2020-12-12, by Ideenmodellierer
-
Show Fallback if no valid sensor value is available:2020-12-12, by Ideenmodellierer
-
Added ex Interface measurement restart in case of i2c disturbance:2020-12-12, by Ideenmodellierer
-
Bugfix bad resolution of compass LSM303AGR:2020-12-12, by Ideenmodellierer
-
Minor: Functional inert cleanup of some unused variables2020-12-03, by heinrichsweikamp
-
Rework pitch detection:2020-11-29, by Ideenmodellierer
-
Handle o2 voltage values < 0.5mV as invalid:2020-11-29, by Ideenmodellierer
-
Return to o2 values:2020-11-29, by Ideenmodellierer
-
Change style of viewport calibration menu:2020-11-29, by Ideenmodellierer
-
Improved focus detection:2020-11-25, by Ideenmodellierer
-
Update String "Blickwinkel":2020-11-25, by Ideenmodellierer
-
Added debug view to viewport calibration:2020-11-25, by Ideenmodellierer
-
Reactivate compass parameter stored in NVM:2020-11-25, by Ideenmodellierer
-
Try to reduce legth of log entry string:2020-11-30, by Ideenmodellierer
-
Added new section "lower.font":2020-11-30, by Ideenmodellierer
-
Minor: Update the documentation for building the code2020-11-29, by heinrichsweikamp
-
-Add 12HR Time Support2020-11-24, by izzni
-
add current build2020-11-21, by heinrichsweikamp
-
Bugfix center / right alignment if dualfont is used:2020-11-15, by Ideenmodellierer
-
Bugfix One or more deactivated sensors hide sensor display:2020-11-15, by Ideenmodellierer
-
Refine o2 sensor diagnostic functions:2020-11-15, by Ideenmodellierer
-
Added ADC sensor interface to O2 sensore menu structure:2020-11-15, by Ideenmodellierer
-
Solved minor warnings2020-11-15, by Ideenmodellierer
-
Added O2 sensor source and calibration parameters to setting structure2020-11-15, by Ideenmodellierer
-
Check if HW evaluation was performed:2020-11-15, by Ideenmodellierer
-
Changed operation mode of RecoverSampleIndex:2020-11-12, by Ideenmodellierer
-
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:2020-11-12, by Ideenmodellierer
-
Switch source of o2 sensor data depending on availability of external ADC:2020-11-12, by Ideenmodellierer
-
Added HW_Info to Discovery <=> RTE data exchange:2020-11-12, by Ideenmodellierer
-
Added external ADC interface functionality (MCP3424):2020-11-12, by Ideenmodellierer
-
Added color indicator for focus state:2020-11-08, by Ideenmodellierer
-
Added menu structure to acces viewport calibration:2020-11-08, by Ideenmodellierer
-
Added viewport functionality:2020-11-08, by Ideenmodellierer
-
Make sure motion detection settings are set to default values:2020-11-08, by Ideenmodellierer
-
Only execute motion detection functions if features is enabled:2020-11-08, by Ideenmodellierer
-
Update roll and pitch value in simulation mode:2020-11-08, by Ideenmodellierer
-
Added viewport calibration to dive menu:2020-11-02, by Ideenmodellierer
-
Added new settings for Viewport:2020-11-02, by Ideenmodellierer
-
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h2020-11-03, by heinrichsweikamp
-
add current build2020-11-02, by heinrichsweikamp
-
Shortend t3 view names:2020-10-11, by Ideenmodellierer
-
Added new t3 view showing first deco stop and tts in parallel:2020-10-10, by Ideenmodellierer
-
Added default view selection and auto return to view to t3 visualization:2020-10-10, by Ideenmodellierer
-
Bugfix return from submenu in t3 view:2020-10-10, by Ideenmodellierer
-
Added inertia simulation for compass heading:2020-10-10, by Ideenmodellierer
-
BugFix firmware downgrade to version with less settings:2020-10-10, by Ideenmodellierer
-
Added center / right alignment option to custom text display:2020-10-07, by Ideenmodellierer
-
Changed visualization of Depth / temperatur / debugview entry2020-10-07, by Ideenmodellierer
-
Increased max value for surface pressure:2020-10-07, by Ideenmodellierer
-
Added tag 1.5.5 release for changeset 02e7e11fdbe82020-10-04, by heinrichsweikamp
-
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release2020-09-25, by heinrichsweikamp
-
add current build2020-09-16, by heinrichsweikamp
-
Bugfix custom view selection dialog:2020-09-15, by Ideenmodellierer
-
Bugfix: No need to consider surface custom view in count of enabled view:2020-09-15, by Ideenmodellierer
-
Added skip condition in custom view selection:2020-09-15, by Ideenmodellierer
-
Added new option to gas configuration: "Off":2020-09-13, by Ideenmodellierer
-
Do not show gases in "Off" state in custom gas list:2020-09-13, by Ideenmodellierer
-
Added new option to gas configuration: "Off":2020-09-13, by Ideenmodellierer
-
Change color ID used in strings for light grey:2020-09-13, by Ideenmodellierer
-
Minor: Removed duplicated definition of number of available gases2020-09-13, by Ideenmodellierer
-
Changed string for data view selections:2020-09-10, by Ideenmodellierer
-
Added compile switch for motion control:2020-09-10, by Ideenmodellierer
-
Move Bigfont and motion Ctrl selection menu out of custom view submenu:2020-09-10, by Ideenmodellierer
-
Moved custom view menu to new tab:2020-09-08, by Ideenmodellierer
-
Reset Safety Stop display in case of a new descend:2020-09-06, by Ideenmodellierer
-
Added T3_gaslist:2020-09-06, by Ideenmodellierer
-
Added color coding for cv gas list:2020-09-06, by Ideenmodellierer
-
Added quick menu function to big font view:2020-09-06, by Ideenmodellierer
-
Added missing display of button labels in refresh function:2020-09-06, by Ideenmodellierer
-
Properly send compass 3 into sleepmode (end-2019 hardware)2020-09-16, by heinrichsweikamp
-
Merge2020-08-31, by heinrichsweikamp
-
Added new strings for the selection of T3 custom views2020-08-30, by Ideenmodellierer
-
Minor adaptions in page layout:2020-08-30, by Ideenmodellierer
-
Display warning in t7 using centered strings2020-08-30, by Ideenmodellierer
-
Show page number in small letters if more than 8 tabs are active2020-08-30, by Ideenmodellierer
-
Reimplementation of tMenuEdit_select:2020-08-30, by Ideenmodellierer
-
Added new menu tab into call structure2020-08-30, by Ideenmodellierer
-
Added new top level menu for customization of views2020-08-30, by Ideenmodellierer
-
Removed second big font profile2020-08-30, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix right alignment of dualfont strings2020-08-24, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combination2020-08-24, by Ideenmodellierer
-
Added compile switch to enable / disable new BigFont layout2020-08-24, by Ideenmodellierer
-
Added dew parameter to enable selection of customer BigFont screens to be displayed2020-08-24, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix right alignment of dualfont strings2020-08-24, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combination2020-08-24, by Ideenmodellierer
-
Added compiler switch for existing debug view parameter2020-08-20, by Ideenmodellierer
-
Added tag v1.5.4 release for changeset e9ca66ce36e52020-08-10, by heinrichsweikamp
-
add wiki sub-directory2020-06-29, by heinrichsweikamp
-
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way2020-06-27, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)2020-05-26, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)2020-05-19, by heinrichsweikamp
-
Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)2020-04-28, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)2020-04-15, by heinrichsweikamp
-
Moved and deactivated analyse sample buffer switch: Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Removed invalidate header function because it is no lonnger needed Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Added compile switch to handle additional data during raw header request: Improve_Logtansfer2020-04-13, by ideenmodellierer
-
Power-down Bluetooth on COMM exit2020-04-08, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)2020-03-30, by heinrichsweikamp
-
Activated reset of sample information within header data at time of sector erasing: minor_improvments2020-03-29, by ideenmodellierer
-
Transfer a dummy profile in case of missing sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvments2020-03-24, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvments2020-03-24, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments2020-03-24, by ideenmodellierer
-
Added initialization of bottle sensor data age counter minor_improvments2020-03-23, by ideenmodellierer
-
Added compile switch to show voltage parallel to charge status percantage minor_improvments2020-03-23, by ideenmodellierer
-
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments2020-03-23, by ideenmodellierer
-
Introduced configuration header for variant managment: minor_improvments2020-03-05, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
fix potential issue with >255 dives in the logbook2020-03-01, by heinrichsweikamp
-
Added tag v1.5.3 release for changeset 5b4c78c36b042020-02-27, by heinrichsweikamp
-
update the 1.5.3 for tests2020-02-24, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)2020-02-24, by heinrichsweikamp
-
Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge2020-02-23, by ideenmodellierer
-
Reduced timeout for common UART communication: Improve_BatteryGasGauge2020-02-23, by ideenmodellierer
-
show battery percent and voltage and surfacemode. That gives additional2020-02-18, by heinrichsweikamp