ostc4: revision graph

graph

less more | rev 795: (0) -300 -100 -50 -30 +30 +50 +100 tip

Moved DiveO2 sensor specific funtionality into separated file:
Mon, 31 Jul 2023 19:50:36 +0200, by Ideenmodellierer
Restructure UART based sensor handling:
Mon, 31 Jul 2023 19:46:29 +0200, by Ideenmodellierer
Bugfix PSCR Settings in Simulator Mode:
Thu, 27 Jul 2023 21:52:19 +0200, by Ideenmodellierer
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Sat, 05 Aug 2023 11:52:08 +0200, by heinrichsweikamp
update current build for testing
Wed, 02 Aug 2023 08:41:03 +0200, by heinrichsweikamp
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
Tue, 25 Jul 2023 14:48:58 +0200, by heinrichsweikamp
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
Wed, 12 Jul 2023 10:13:25 +0200, by heinrichsweikamp
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
Tue, 04 Jul 2023 14:39:06 +0200, by heinrichsweikamp
Dev Bugfx Empty buffer indication and stability improvments:
Sun, 04 Jun 2023 21:59:26 +0200, by Ideenmodellierer
Cleanup sensor data interface:
Sun, 04 Jun 2023 21:54:24 +0200, by Ideenmodellierer
Change support from Pyroscience -> DiveO2 sensors
Wed, 31 May 2023 08:44:07 +0200, by heinrichsweikamp
Bugfixloop UART multiplexer integration:
Tue, 30 May 2023 18:44:20 +0200, by Ideenmodellierer
Update digital O2 sensor information:
Mon, 29 May 2023 20:26:38 +0200, by Ideenmodellierer
Sensor status support for multiplexed DiveO2 sensors:
Mon, 29 May 2023 20:22:15 +0200, by Ideenmodellierer
Update real multiplexer implementation:
Mon, 29 May 2023 18:26:55 +0200, by Ideenmodellierer
Discovery<=>SmallCPU inferface update:
Tue, 23 May 2023 21:50:19 +0200, by Ideenmodellierer
Added UART multiplexer support for DiveO2:
Tue, 23 May 2023 21:45:34 +0200, by Ideenmodellierer
Zusammenf?hren
Mon, 22 May 2023 09:15:09 +0200, by heinrichsweikamp
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Mon, 22 May 2023 09:14:27 +0200, by heinrichsweikamp
Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 18 May 2023 09:49:17 +0200, by heinrichsweikamp
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Thu, 11 May 2023 12:13:03 +0200, by heinrichsweikamp
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:25:39 +0200, by heinrichsweikamp
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Wed, 10 May 2023 16:24:57 +0200, by heinrichsweikamp
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Sat, 22 Apr 2023 21:11:50 -0500, by izzni
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:48:23 +0200, by heinrichsweikamp
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:44 +0200, by heinrichsweikamp
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Fri, 21 Apr 2023 09:47:06 +0200, by heinrichsweikamp
1.6.2 release
Thu, 13 Apr 2023 09:35:43 +0200, by heinrichsweikamp
Update build for testing
Wed, 12 Apr 2023 09:56:00 +0200, by heinrichsweikamp
change button default responsiveness to 100
Wed, 12 Apr 2023 09:30:15 +0200, by heinrichsweikamp

less more | rev 795: (0) -300 -100 -50 -30 +30 +50 +100 tip