ostc4: revision graph

graph

less more | rev 815: (0) -240 tip

Bugfix CustomView selection during dive mode:
Sun, 03 Sep 2023 18:03:49 +0200, by Ideenmodellierer
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Sun, 03 Sep 2023 17:58:12 +0200, by Ideenmodellierer
Used real sensor state in simulation:
Sun, 03 Sep 2023 17:53:07 +0200, by Ideenmodellierer
Testing build
Thu, 31 Aug 2023 10:33:25 +0200, by heinrichsweikamp
Added function to skip lines which are not needed for operation:
Sun, 27 Aug 2023 20:59:12 +0200, by Ideenmodellierer
Only jump to Sensor view during charging if sensors are connected:
Sun, 27 Aug 2023 20:55:57 +0200, by Ideenmodellierer
DevBugfix CO2 sensor in streaming mode:
Sun, 27 Aug 2023 20:51:13 +0200, by Ideenmodellierer
Testing build
Sat, 26 Aug 2023 13:38:13 +0200, by heinrichsweikamp
Zusammenf?hren
Sat, 26 Aug 2023 13:37:06 +0200, by heinrichsweikamp
Update Firmware version number
Sat, 26 Aug 2023 13:35:15 +0200, by heinrichsweikamp
Adds a simple countdown timer, available as a custom view in surface and dive mode.
Mon, 21 Aug 2023 17:20:07 +0200, by heinrichsweikamp
Cleanup initialisation code:
Thu, 10 Aug 2023 21:35:34 +0200, by Ideenmodellierer
Cleanup initialisation / deinitialization:
Thu, 10 Aug 2023 21:30:24 +0200, by Ideenmodellierer
Removed dependency to protocol setting:
Thu, 10 Aug 2023 21:27:58 +0200, by Ideenmodellierer
Update RTE version number
Thu, 10 Aug 2023 21:24:04 +0200, by Ideenmodellierer
Cleanup warnings
Tue, 08 Aug 2023 17:29:03 +0200, by Ideenmodellierer
Added CO2 mirrow instance:
Mon, 07 Aug 2023 20:32:42 +0200, by Ideenmodellierer
Migrated CO2 protocol implementation to new format:
Mon, 07 Aug 2023 20:29:44 +0200, by Ideenmodellierer
Use mirror sensortype for visualization:
Mon, 31 Jul 2023 20:10:27 +0200, by Ideenmodellierer
Expanded Sensor map structure:
Mon, 31 Jul 2023 20:00:06 +0200, by Ideenmodellierer
Moved DiveO2 sensor specific funtionality into separated file:
Mon, 31 Jul 2023 19:50:36 +0200, by Ideenmodellierer
Restructure UART based sensor handling:
Mon, 31 Jul 2023 19:46:29 +0200, by Ideenmodellierer
Bugfix PSCR Settings in Simulator Mode:
Thu, 27 Jul 2023 21:52:19 +0200, by Ideenmodellierer
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
Sat, 05 Aug 2023 11:52:08 +0200, by heinrichsweikamp
update current build for testing
Wed, 02 Aug 2023 08:41:03 +0200, by heinrichsweikamp
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
Tue, 25 Jul 2023 14:48:58 +0200, by heinrichsweikamp
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
Wed, 12 Jul 2023 10:13:25 +0200, by heinrichsweikamp
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
Tue, 04 Jul 2023 14:39:06 +0200, by heinrichsweikamp
Dev Bugfx Empty buffer indication and stability improvments:
Sun, 04 Jun 2023 21:59:26 +0200, by Ideenmodellierer
Cleanup sensor data interface:
Sun, 04 Jun 2023 21:54:24 +0200, by Ideenmodellierer
Change support from Pyroscience -> DiveO2 sensors
Wed, 31 May 2023 08:44:07 +0200, by heinrichsweikamp
Bugfixloop UART multiplexer integration:
Tue, 30 May 2023 18:44:20 +0200, by Ideenmodellierer
Update digital O2 sensor information:
Mon, 29 May 2023 20:26:38 +0200, by Ideenmodellierer
Sensor status support for multiplexed DiveO2 sensors:
Mon, 29 May 2023 20:22:15 +0200, by Ideenmodellierer
Update real multiplexer implementation:
Mon, 29 May 2023 18:26:55 +0200, by Ideenmodellierer
Discovery<=>SmallCPU inferface update:
Tue, 23 May 2023 21:50:19 +0200, by Ideenmodellierer
Added UART multiplexer support for DiveO2:
Tue, 23 May 2023 21:45:34 +0200, by Ideenmodellierer
Zusammenf?hren
Mon, 22 May 2023 09:15:09 +0200, by heinrichsweikamp
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
Mon, 22 May 2023 09:14:27 +0200, by heinrichsweikamp
Add support for a configurable compass declination in a range of -99 to 99 degrees.
Thu, 18 May 2023 09:49:17 +0200, by heinrichsweikamp
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
Thu, 11 May 2023 12:13:03 +0200, by heinrichsweikamp
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
Wed, 10 May 2023 16:25:39 +0200, by heinrichsweikamp
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
Wed, 10 May 2023 16:24:57 +0200, by heinrichsweikamp
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
Sat, 22 Apr 2023 21:11:50 -0500, by izzni
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
Fri, 21 Apr 2023 09:48:23 +0200, by heinrichsweikamp
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
Fri, 21 Apr 2023 09:47:44 +0200, by heinrichsweikamp
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
Fri, 21 Apr 2023 09:47:06 +0200, by heinrichsweikamp
1.6.2 release
Thu, 13 Apr 2023 09:35:43 +0200, by heinrichsweikamp
Update build for testing
Wed, 12 Apr 2023 09:56:00 +0200, by heinrichsweikamp
change button default responsiveness to 100
Wed, 12 Apr 2023 09:30:15 +0200, by heinrichsweikamp
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
Wed, 12 Apr 2023 09:24:44 +0200, by heinrichsweikamp
Update build for testing
Mon, 27 Mar 2023 10:04:53 +0200, by heinrichsweikamp
increase HAL_Delay to 10ms for cold-start-button reset
Sun, 26 Mar 2023 18:34:30 +0200, by heinrichsweikamp
Preparing a 1.6.2 release candidate
Sun, 26 Mar 2023 11:27:29 +0200, by heinrichsweikamp
Fix/handle negative scrubber timer values
Tue, 21 Mar 2023 12:57:37 +0100, by heinrichsweikamp
Quit simualted dives after the dive time set in the SIM tab.
Tue, 21 Mar 2023 12:56:54 +0100, by heinrichsweikamp
Some compass improvements from mikeller
Fri, 17 Mar 2023 09:35:25 +0100, by heinrichsweikamp
- Colours for scrubber display when time remaining falls below a threshold value
Wed, 15 Mar 2023 09:18:07 +0100, by heinrichsweikamp
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
Tue, 07 Mar 2023 22:14:20 +0100, by Ideenmodellierer
Added visualization of CO2 during dive:
Tue, 07 Mar 2023 20:02:05 +0100, by Ideenmodellierer
Cleanup display of multiple warnings in T3 (Big font) view:
Tue, 07 Mar 2023 19:59:02 +0100, by Ideenmodellierer
Only show autodetection in sensor menu if external interface is present:
Tue, 07 Mar 2023 19:55:13 +0100, by Ideenmodellierer
Updated outdated comment
Tue, 07 Mar 2023 19:52:18 +0100, by Ideenmodellierer
Dev Bugfix: Alignment problem in lifedata structure:
Tue, 07 Mar 2023 19:51:30 +0100, by Ideenmodellierer
resolv merge
Mon, 13 Mar 2023 22:23:00 +0100, by Ideenmodellierer
Avoid blinking in customer view selection page:
Sun, 05 Mar 2023 22:17:32 +0100, by Ideenmodellierer
Added enum for Co2 display
Mon, 13 Mar 2023 22:18:28 +0100, by Ideenmodellierer
Added display of co2 ppm values:
Sun, 05 Mar 2023 22:14:53 +0100, by Ideenmodellierer
Added pressure compensation to CO2 detection:
Sun, 05 Mar 2023 22:06:47 +0100, by Ideenmodellierer
Code cleanup sensors under development:
Tue, 21 Feb 2023 21:19:31 +0100, by Ideenmodellierer
Update Sentinel protocol:
Sun, 19 Feb 2023 21:52:02 +0100, by Ideenmodellierer
Added DiveO2 fatal error detection:
Sun, 19 Feb 2023 21:51:19 +0100, by Ideenmodellierer
Enable start dive in Big font display:
Sun, 19 Feb 2023 21:48:47 +0100, by Ideenmodellierer
Update Sentinel protocol:
Sun, 19 Feb 2023 21:43:24 +0100, by Ideenmodellierer
Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:54 +0100, by Ideenmodellierer
Added button lock after wakeup in surface mode:
Thu, 02 Feb 2023 17:35:38 +0100, by Ideenmodellierer
Enable start dive in Big font display:
Thu, 02 Feb 2023 17:26:54 +0100, by Ideenmodellierer
Added data init function for external interface:
Thu, 02 Feb 2023 17:19:24 +0100, by Ideenmodellierer
NEW: Add mini compass with marker declination indication
Mon, 06 Mar 2023 16:03:00 +0100, by heinrichsweikamp
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
Fri, 03 Mar 2023 10:41:44 +0100, by heinrichsweikamp
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
Tue, 14 Feb 2023 10:21:56 +0100, by heinrichsweikamp
Removed interface selection from sensor menu:
Sun, 15 Jan 2023 21:51:54 +0100, by Ideenmodellierer
Optical sensor as default:
Sun, 15 Jan 2023 21:48:34 +0100, by Ideenmodellierer
Fix compiler switch:
Sun, 15 Jan 2023 21:45:14 +0100, by Ideenmodellierer
Improvment sensor Autodetection:
Sun, 15 Jan 2023 21:43:33 +0100, by Ideenmodellierer
Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:49:40 +0100, by Ideenmodellierer
Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:46:17 +0100, by Ideenmodellierer
Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:41:36 +0100, by Ideenmodellierer
Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:37:20 +0100, by Ideenmodellierer
Bugfix data synchronization after RTE start:
Sat, 14 Jan 2023 20:35:40 +0100, by Ideenmodellierer
Update CO2 sensor implementation:
Sat, 07 Jan 2023 18:11:52 +0100, by Ideenmodellierer
Development feature: external pressure sensor
Thu, 05 Jan 2023 18:30:06 +0100, by Ideenmodellierer
DigO2 added raw data request:
Thu, 05 Jan 2023 18:27:04 +0100, by Ideenmodellierer
Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:25:47 +0100, by Ideenmodellierer
DigO2 added raw data request:
Thu, 05 Jan 2023 18:22:21 +0100, by Ideenmodellierer
Bugfix set date (year):
Tue, 03 Jan 2023 19:47:12 +0100, by Ideenmodellierer
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 27 Nov 2022 15:18:00 +0100, by heinrichsweikamp
Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:49:41 +0100, by Ideenmodellierer
Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:46:10 +0100, by Ideenmodellierer
Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:43:04 +0100, by Ideenmodellierer
Increased version number and set beta label
Sun, 20 Nov 2022 20:42:33 +0100, by Ideenmodellierer
Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:08 +0100, by Ideenmodellierer
Increased version number and set beta label
Sun, 20 Nov 2022 20:37:44 +0100, by Ideenmodellierer
Bugfix PSCR menu button label:
Sun, 20 Nov 2022 20:36:34 +0100, by Ideenmodellierer
Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 22:16:56 +0100, by Ideenmodellierer
Extension scrubber time:
Tue, 08 Nov 2022 21:16:17 +0100, by Ideenmodellierer
Bugfix compass bearing:
Tue, 08 Nov 2022 21:13:14 +0100, by Ideenmodellierer
Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:51 +0100, by Ideenmodellierer
Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100, by Ideenmodellierer
Bugfix: only reset menu if a new sub menu is created:
Thu, 03 Nov 2022 20:37:06 +0100, by Ideenmodellierer
Bugfix release frame:
Tue, 01 Nov 2022 09:55:45 +0100, by Ideenmodellierer
Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:49:21 +0200, by Ideenmodellierer
Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:32:24 +0200, by Ideenmodellierer
Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 20:29:37 +0200, by Ideenmodellierer
Bugfix display of deactivated sensors:
Fri, 28 Oct 2022 19:39:20 +0200, by Ideenmodellierer
Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 21:21:32 +0200, by Ideenmodellierer
Cleanup warnings:
Tue, 18 Oct 2022 20:56:19 +0200, by Ideenmodellierer
Bugfix Empty menu:
Sun, 25 Sep 2022 21:13:45 +0200, by Ideenmodellierer
Improvment key event detection:
Sun, 25 Sep 2022 21:09:18 +0200, by Ideenmodellierer
Merge
Fri, 19 Aug 2022 11:30:24 +0200, by heinrichsweikamp
1.6.0 release Betatest
Fri, 19 Aug 2022 11:27:44 +0200, by heinrichsweikamp
Update current build for testing Betatest
Sat, 06 Aug 2022 11:10:56 +0200, by heinrichsweikamp
Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 16:04:52 +0200, by Ideenmodellierer
Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:27:01 +0200, by Ideenmodellierer
Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:26:28 +0200, by Ideenmodellierer
Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:22:26 +0200, by Ideenmodellierer
Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:15:01 +0200, by Ideenmodellierer
Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:13:29 +0200, by Ideenmodellierer
Increased version numbers: Betatest
Fri, 05 Aug 2022 15:10:10 +0200, by Ideenmodellierer
Bugfix Battery charge complete event: Betatest
Fri, 05 Aug 2022 14:56:17 +0200, by Ideenmodellierer
Bugfix automatic switch to o2 sensor custom view: Betatest
Wed, 03 Aug 2022 18:19:03 +0200, by Ideenmodellierer
Ignore automatic setpoint changes during ascend: Betatest
Thu, 02 Jun 2022 20:24:59 +0200, by Ideenmodellierer
Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 16 May 2022 20:50:26 +0200, by Ideenmodellierer
Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:15:01 +0200, by Ideenmodellierer
Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:10:10 +0200, by Ideenmodellierer
Bugfix visualization better setpoint: Betatest
Mon, 25 Apr 2022 21:07:28 +0200, by Ideenmodellierer
cleanup: Use correct "per" symbol Betatest
Fri, 22 Apr 2022 18:24:43 +0200, by Jan Mulder
Bugfix: deco planner did not initialize properly Betatest
Thu, 21 Apr 2022 21:02:50 +0200, by Jan Mulder
Move include file to common to ... Betatest
Wed, 20 Apr 2022 20:25:04 +0200, by Jan Mulder
Allow longer scrubber time Betatest
Mon, 22 Nov 2021 19:39:11 +0100, by Jan Mulder
Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:07:21 +0200, by Ideenmodellierer
Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:01:29 +0200, by heinrichsweikamp
Show 98% in case of Oxygen as the calibrating gas Betatest
Wed, 30 Mar 2022 18:00:21 +0200, by heinrichsweikamp
Added Charging view: Betatest
Sat, 12 Mar 2022 23:01:11 +0100, by Ideenmodellierer
Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:58:22 +0100, by Ideenmodellierer
Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:54:26 +0100, by Ideenmodellierer
Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:49:09 +0100, by Ideenmodellierer
Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100, by Ideenmodellierer
Increased version number Betatest
Sat, 12 Mar 2022 22:42:56 +0100, by Ideenmodellierer
increase version numbers for upcomming release Betatest
Sat, 12 Mar 2022 14:57:54 +0100, by heinrichsweikamp
update test build Betatest
Fri, 24 Dec 2021 13:40:47 +0100, by heinrichsweikamp
Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:36:41 +0100, by Ideenmodellierer
Revert Setbluetooh name changes Betatest
Tue, 21 Dec 2021 19:32:29 +0100, by Ideenmodellierer
PSCR Mode Betatest
Tue, 14 Dec 2021 15:36:10 +0100, by heinrichs weikamp
Undo Rev. 660
Mon, 01 Nov 2021 12:39:34 +0100, by heinrichs weikamp
Add option to reset bluetooth name
Sun, 08 Aug 2021 09:36:23 +0200, by heinrichsweikamp
Update build file for testing
Wed, 28 Apr 2021 09:47:25 +0200, by heinrichs weikamp
Bugfix handling of new menu tab in flipped mode:
Tue, 27 Apr 2021 21:29:26 +0200, by Ideenmodellierer
Update release date
Mon, 26 Apr 2021 15:03:04 +0200, by heinrichs weikamp
Added visualization of scrubber time:
Sun, 25 Apr 2021 20:47:01 +0200, by Ideenmodellierer
Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200, by Ideenmodellierer
Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:41:19 +0200, by Ideenmodellierer
Bugfix temperature display Logpage2:
Sun, 25 Apr 2021 20:36:18 +0200, by Ideenmodellierer
Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:34:53 +0200, by Ideenmodellierer
Automatik setpoint change:
Mon, 19 Apr 2021 20:20:38 +0200, by Ideenmodellierer
Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200, by Ideenmodellierer
Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:16:24 +0200, by Ideenmodellierer
Motion detection: Enable focus after focus calibration:
Mon, 19 Apr 2021 20:14:20 +0200, by Ideenmodellierer
Integrated selection of bailout in the diluent selection page:
Tue, 13 Apr 2021 19:25:41 +0200, by Ideenmodellierer
Remove battery charge counter from information menu:
Tue, 13 Apr 2021 19:21:14 +0200, by Ideenmodellierer
Small changes in charger state handling:
Tue, 13 Apr 2021 19:18:32 +0200, by Ideenmodellierer
Compile with ENABLE_CHARGER_STATUS_V2
Tue, 30 Mar 2021 10:34:12 +0200, by heinrichs weikamp
Reimplemented charger status generation (deactivated):
Wed, 24 Mar 2021 22:06:00 +0100, by Ideenmodellierer
Do not show focus indicator in case motion detection is suspended:
Wed, 24 Mar 2021 21:28:41 +0100, by Ideenmodellierer
Development Bugfix Deco bars not shown after last deco stop passed:
Thu, 11 Mar 2021 21:45:22 +0100, by Ideenmodellierer
Development bugfix Viewport settings:
Thu, 11 Mar 2021 21:43:43 +0100, by Ideenmodellierer
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
Thu, 25 Feb 2021 12:20:43 +0100, by heinrichsweikamp
Added last measured PPO2 value to sensor selection dialog:
Wed, 24 Feb 2021 21:45:35 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:04:07 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:03:54 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:03:22 +0100, by Ideenmodellierer
Enable sensor check for Analog PPO2 mode:
Wed, 24 Feb 2021 19:18:26 +0100, by Ideenmodellierer
Added menu structure to allow ppo2 modification in simulator mode:
Tue, 23 Feb 2021 21:58:18 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:55:52 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:55:26 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:54:56 +0100, by Ideenmodellierer
Added functionality to add ppo2 mV offset:
Tue, 23 Feb 2021 21:53:24 +0100, by Ideenmodellierer
Added compile switch for T3_PROFILE menu operation option
Fri, 12 Feb 2021 21:46:36 +0100, by Ideenmodellierer
Improve in / out of focus transitions:
Fri, 12 Feb 2021 21:43:27 +0100, by Ideenmodellierer
Added option to select sensitivity of focus detection:
Fri, 12 Feb 2021 21:37:50 +0100, by Ideenmodellierer
Switch Sector / Scroll detection to vector implementation:
Mon, 08 Feb 2021 21:35:46 +0100, by Ideenmodellierer
Development bugfix: Marker in standard t3 view drawn in wrong direction
Sun, 07 Feb 2021 22:05:32 +0100, by Ideenmodellierer
Improvment frame Handling:
Sun, 07 Feb 2021 22:04:43 +0100, by Ideenmodellierer
Adjustments for flipped display view:
Wed, 03 Feb 2021 21:45:48 +0100, by Ideenmodellierer
Use roll and pitch agles in 0-360 format:
Wed, 03 Feb 2021 21:44:22 +0100, by Ideenmodellierer
Added minilog functions to allow marker synchronisation:
Wed, 27 Jan 2021 22:12:44 +0100, by Ideenmodellierer
Added t3 quick menu for marker synchronisation:
Wed, 27 Jan 2021 22:10:11 +0100, by Ideenmodellierer
Development bugfix: focus state not remembered:
Wed, 27 Jan 2021 22:04:45 +0100, by Ideenmodellierer
Development bugfix: Low battery warning was interpretated as marker:
Wed, 27 Jan 2021 22:03:11 +0100, by Ideenmodellierer
Development bugfix: show replay symbol only for the selected dive:
Wed, 27 Jan 2021 21:58:46 +0100, by Ideenmodellierer
Moved non critical functions from timer interrupt to main loop:
Wed, 27 Jan 2021 21:56:48 +0100, by Ideenmodellierer
Added "Set Marker" to T3 quick menu:
Wed, 20 Jan 2021 20:05:05 +0100, by Ideenmodellierer
Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:33:07 +0100, by Ideenmodellierer
Bugfix inverted whitspace:
Fri, 15 Jan 2021 21:20:29 +0100, by Ideenmodellierer
Suspend MotionDetection events while diver is operationg the OSTC:
Thu, 14 Jan 2021 21:25:15 +0100, by Ideenmodellierer
Added access to logbook marker data:
Thu, 14 Jan 2021 20:38:28 +0100, by Ideenmodellierer
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
Thu, 14 Jan 2021 19:17:28 +0100, by Ideenmodellierer
Update RTE required value for release
Fri, 05 Feb 2021 14:53:50 +0100, by heinrichsweikamp
Added tag v1.5.6 release for changeset 06ec1da5e105
Fri, 05 Feb 2021 14:50:18 +0100, by heinrichsweikamp
1.5.6 release v1.5.6 release
Fri, 05 Feb 2021 14:50:05 +0100, by heinrichsweikamp
change O2_CALIB_FRACTION_O2 to 0.98
Thu, 07 Jan 2021 09:53:04 +0100, by heinrichsweikamp
Merged menu items of viewport and motion control:
Wed, 06 Jan 2021 21:01:00 +0100, by Ideenmodellierer
T3 profile view: Added visualization of deco data
Wed, 06 Jan 2021 19:41:43 +0100, by Ideenmodellierer
Added replay data scaling in case life data is longer than replay block
Tue, 05 Jan 2021 20:35:01 +0100, by Ideenmodellierer
Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 22:49:07 +0100, by Ideenmodellierer
Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 22:45:37 +0100, by Ideenmodellierer
Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 21:48:31 +0100, by Ideenmodellierer
New replay block for T3 profile:
Mon, 04 Jan 2021 21:41:51 +0100, by Ideenmodellierer
MotionControl-Sector: Map sectors during switch T7 <=> T3:
Mon, 04 Jan 2021 21:38:28 +0100, by Ideenmodellierer
Added functionality to select a dive to be shown in the T3 profile view:
Mon, 04 Jan 2021 21:35:38 +0100, by Ideenmodellierer
Bugfix Selection of primary view:
Mon, 04 Jan 2021 21:32:39 +0100, by Ideenmodellierer
Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:30:04 +0100, by Ideenmodellierer
Added PrintGraph option to skip invalid data entries:
Mon, 04 Jan 2021 21:24:24 +0100, by Ideenmodellierer
MotionCtrl - Sectorview Map sectors directly to custom views:
Sun, 03 Jan 2021 14:43:16 +0100, by Ideenmodellierer
Minor: Comment translation into English
Wed, 06 Jan 2021 22:02:49 +0100, by heinrichsweikamp
Align VPM tag in log list to be at same position as GF tag:
Tue, 22 Dec 2020 22:23:11 +0100, by Ideenmodellierer
Minor: Update the documentation for building the code
Thu, 17 Dec 2020 10:58:28 +0100, by heinrichsweikamp
Update current build, "RTErequired" value and release date
Thu, 17 Dec 2020 09:52:12 +0100, by heinrichsweikamp
update ostc4pack sample files
Wed, 16 Dec 2020 09:43:11 +0100, by heinrichsweikamp
Motion control: Jump back to primary view if focus is lost:
Sun, 13 Dec 2020 18:31:40 +0100, by Ideenmodellierer
Reduced view angle and number of vusiualized custom views in setor mode:
Sun, 13 Dec 2020 18:29:12 +0100, by Ideenmodellierer
Added option for 100% o2 calibration:
Sat, 12 Dec 2020 21:05:11 +0100, by Ideenmodellierer
Solved minor warnings
Sat, 12 Dec 2020 20:54:31 +0100, by Ideenmodellierer
Show Fallback if no valid sensor value is available:
Sat, 12 Dec 2020 20:52:58 +0100, by Ideenmodellierer
Added ex Interface measurement restart in case of i2c disturbance:
Sat, 12 Dec 2020 19:18:57 +0100, by Ideenmodellierer
Bugfix bad resolution of compass LSM303AGR:
Sat, 12 Dec 2020 19:16:37 +0100, by Ideenmodellierer
Minor: Functional inert cleanup of some unused variables
Thu, 03 Dec 2020 13:17:32 +0100, by heinrichsweikamp
Rework pitch detection:
Sun, 29 Nov 2020 23:02:11 +0100, by Ideenmodellierer
Handle o2 voltage values < 0.5mV as invalid:
Sun, 29 Nov 2020 22:58:11 +0100, by Ideenmodellierer
Return to o2 values:
Sun, 29 Nov 2020 22:55:31 +0100, by Ideenmodellierer

less more | rev 815: (0) -240 tip

Mercurial > public > ostc4

graph