Mercurial > public > ostc4
graph
-
Resume UART com with gnss after sleep: Evo_2_23Tue, 10 Dec 2024 21:03:04 +0100, by Ideenmodellierer
-
UART Gnss: Added fletcher calculation: Evo_2_23Sun, 08 Dec 2024 17:38:16 +0100, by Ideenmodellierer
-
Add a line to the compass heading dive menu that shows the currently set heading to enable the Evo_2_23Mon, 02 Dec 2024 11:16:10 +0100, by heinrichsweikamp
-
Bugfix sensor de-/activation handling: Evo_2_23Thu, 14 Nov 2024 20:13:18 +0100, by Ideenmodellierer
-
Bugfix real scrubber time decreased in sim mode: Evo_2_23Wed, 13 Nov 2024 17:55:05 +0100, by Ideenmodellierer
-
GNSS support for external UART interface: Evo_2_23Sun, 03 Nov 2024 15:43:04 +0100, by Ideenmodellierer
-
Switch external interface tx communication to DMA: Evo_2_23Sun, 03 Nov 2024 15:40:55 +0100, by Ideenmodellierer
-
Bugfix external interface power up after sleep: Evo_2_23Sun, 03 Nov 2024 15:37:00 +0100, by Ideenmodellierer
-
External sensor UART: Switch to DMA TX transfers: Evo_2_23Mon, 28 Oct 2024 20:34:58 +0100, by Ideenmodellierer
-
Devbugfix Sample time resolution for longer dives: Evo_2_23Tue, 15 Oct 2024 19:12:05 +0200, by Ideenmodellierer
-
Adaptation custom view deco plan for VPM: Evo_2_23Sun, 13 Oct 2024 18:13:35 +0200, by ideenmodellierer
-
Bugfix de-/activation of deco stop consideration in simulator: Evo_2_23Sun, 13 Oct 2024 18:07:23 +0200, by ideenmodellierer
-
Disable GNSS operations using compile switch: Evo_2_23Thu, 03 Oct 2024 20:25:49 +0200, by Ideenmodellierer
-
minor: LED/Vibration behavior on wake-up Evo_2_23Tue, 01 Oct 2024 14:18:21 +0200, by heinrichsweikamp
-
Added data path and visualization for position data: Evo_2_23Mon, 30 Sep 2024 21:56:05 +0200, by Ideenmodellierer
-
Use dive profile as source for simulator: Evo_2_23Thu, 26 Sep 2024 18:36:05 +0200, by ideenmodellierer
-
Development Feature Runtime in Debugview: Evo_2_23Thu, 26 Sep 2024 18:32:36 +0200, by ideenmodellierer
-
Added hysteresis for ascent speed coloring: Evo_2_23Tue, 10 Sep 2024 21:16:32 +0200, by ideenmodellierer
-
cleanup and disable function for GNSS uart and DMA Evo_2_23Fri, 06 Sep 2024 18:43:30 +0200, by heinrichsweikamp
-
Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_23Tue, 03 Sep 2024 20:46:42 +0200, by Ideenmodellierer
-
Replaced global hardwareDisplay with unit access: Evo_2_23Sun, 01 Sep 2024 21:35:50 +0200, by Ideenmodellierer
-
Added compile switch for predive check menu: Evo_2_23Sat, 31 Aug 2024 18:14:40 +0200, by Ideenmodellierer
-
brightness settings and proper power down for new screen Evo_2_23Sun, 25 Aug 2024 18:55:43 +0200, by heinrichsweikamp
-
DevBugfix: Exit condition deco_stop_depth Evo_2_23Tue, 20 Aug 2024 15:18:43 +0200, by Ideenmodellierer
-
Minor: Enable CO2-Sensor as default now Evo_2_23Fri, 16 Aug 2024 16:17:51 +0200, by heinrichsweikamp
-
DevBugfix: Added missing default language value Evo_2_23Thu, 15 Aug 2024 20:44:35 +0200, by Ideenmodellierer
-
Added first time initialization for new bluetooth module: Evo_2_23Wed, 14 Aug 2024 14:41:04 +0200, by Ideenmodellierer
-
Introduce speed dependend coloring of depth: Evo_2_23Mon, 12 Aug 2024 15:14:19 +0200, by Ideenmodellierer
-
Decrease calculation interval for ascend speed: Evo_2_23Mon, 12 Aug 2024 14:30:22 +0200, by Ideenmodellierer
-
Zusammenf?hrenMon, 22 Jul 2024 16:40:14 +0200, by heinrichsweikamp
-
When opening the logbook, or scrolling inside a logbook page,Mon, 22 Jul 2024 16:39:48 +0200, by heinrichsweikamp
-
Fix incorrect logging of bailout to Open Circuit when using the best gas.Mon, 22 Jul 2024 16:38:36 +0200, by heinrichsweikamp
-
Bugfix empty line in deco plan (VPM only): Evo_2_23Tue, 02 Jul 2024 20:05:08 +0200, by Ideenmodellierer
-
Only use deco gas for calculation if option is enabled: Evo_2_23Tue, 02 Jul 2024 19:24:03 +0200, by Ideenmodellierer
-
Improvment battery charger visualization: Evo_2_23Tue, 07 May 2024 21:20:33 +0200, by Ideenmodellierer
-
Bugfix initialisation of surface pressure: Evo_2_23Tue, 07 May 2024 21:12:37 +0200, by Ideenmodellierer
-
Do not show SP tab if PSCR mode is active: Evo_2_23Sun, 05 May 2024 17:20:56 +0200, by Ideenmodellierer
-
Potential Bugfix Selection MenuEdit lifecycle: Evo_2_23Thu, 07 Mar 2024 21:51:18 +0100, by Ideenmodellierer
-
Check line enable/disable state when a new page is selected: Evo_2_23Fri, 01 Mar 2024 19:30:29 +0100, by Ideenmodellierer
-
Consider flipped screen for Predive menu: Evo_2_23Thu, 29 Feb 2024 18:49:55 +0100, by Ideenmodellierer
-
Bugfix tInfo_write_content_simple flip: Evo_2_23Thu, 15 Feb 2024 21:26:28 +0100, by Ideenmodellierer
-
Minor: Remove absolute paths from the reference project filesTue, 13 Feb 2024 17:30:24 +0100, by heinrichsweikamp
-
Consider pressure offset compensation in case of setting a default value: Evo_2_23Sun, 21 Jan 2024 22:26:37 +0100, by Ideenmodellierer
-
Added option to adjust pressure to diveO2 reference: Evo_2_23Sun, 21 Jan 2024 22:18:51 +0100, by Ideenmodellierer
-
Update version number and set beta state Evo_2_23Sat, 20 Jan 2024 19:38:52 +0100, by Ideenmodellierer
-
Migrated Sentinel protocol to new UART structure: Evo_2_23Mon, 15 Jan 2024 21:44:18 +0100, by Ideenmodellierer
-
Code cleanup: UART protocol definitions Evo_2_23Sun, 07 Jan 2024 21:20:15 +0100, by Ideenmodellierer
-
Bugfixes and code cleanup for BF views: Evo_2_23Wed, 27 Dec 2023 19:37:17 +0100, by ideenmodellierer
-
Bugfix BF temperatur display and cv switching: Evo_2_23Wed, 27 Dec 2023 19:24:44 +0100, by ideenmodellierer
-
Added autofocus for BF Navigation view: Evo_2_23Sun, 17 Dec 2023 21:49:02 +0100, by Ideenmodellierer
-
Added event based display changes for big font view: Evo_2_23Sun, 17 Dec 2023 21:14:17 +0100, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_23Sun, 17 Dec 2023 21:10:04 +0100, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_23Thu, 16 Nov 2023 20:37:20 +0100, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not: Evo_2_23Thu, 16 Nov 2023 20:32:09 +0100, by Ideenmodellierer
-
Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_23Thu, 16 Nov 2023 20:25:01 +0100, by Ideenmodellierer
-
Bugfix Line order of info screen with flip screen active: Evo_2_23Wed, 11 Oct 2023 17:49:19 +0200, by Ideenmodellierer
-
Bugfix Flipscreen visualization:Mon, 09 Oct 2023 16:50:11 +0200, by Ideenmodellierer
-
User TestMon, 09 Oct 2023 11:23:27 +0200, by heinrichsweikamp
-
1.6.5 releaseMon, 25 Sep 2023 10:56:32 +0200, by heinrichsweikamp
-
Split definition of custom views:Sun, 24 Sep 2023 18:43:12 +0200, by Ideenmodellierer
-
Added debug information in case an error in the settings has been detected:Sun, 24 Sep 2023 18:39:26 +0200, by Ideenmodellierer
-
1.6.4 releaseThu, 14 Sep 2023 13:24:30 +0200, by heinrichsweikamp
-
Testing buildTue, 12 Sep 2023 12:02:49 +0200, by heinrichsweikamp
-
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)Sun, 10 Sep 2023 11:46:45 +0200, by heinrichsweikamp
-
Bugfix CustomView selection during dive mode:Sun, 03 Sep 2023 18:03:49 +0200, by Ideenmodellierer
-
Dev Bugfix: O2 values of new detected sensors were shown as invalid:Sun, 03 Sep 2023 17:58:12 +0200, by Ideenmodellierer
-
Used real sensor state in simulation:Sun, 03 Sep 2023 17:53:07 +0200, by Ideenmodellierer
-
Testing buildThu, 31 Aug 2023 10:33:25 +0200, by heinrichsweikamp
-
Added function to skip lines which are not needed for operation:Sun, 27 Aug 2023 20:59:12 +0200, by Ideenmodellierer
-
Only jump to Sensor view during charging if sensors are connected:Sun, 27 Aug 2023 20:55:57 +0200, by Ideenmodellierer
-
DevBugfix CO2 sensor in streaming mode:Sun, 27 Aug 2023 20:51:13 +0200, by Ideenmodellierer
-
Testing buildSat, 26 Aug 2023 13:38:13 +0200, by heinrichsweikamp
-
Zusammenf?hrenSat, 26 Aug 2023 13:37:06 +0200, by heinrichsweikamp
-
Update Firmware version numberSat, 26 Aug 2023 13:35:15 +0200, by heinrichsweikamp
-
Adds a simple countdown timer, available as a custom view in surface and dive mode.Mon, 21 Aug 2023 17:20:07 +0200, by heinrichsweikamp
-
Cleanup initialisation code:Thu, 10 Aug 2023 21:35:34 +0200, by Ideenmodellierer
-
Cleanup initialisation / deinitialization:Thu, 10 Aug 2023 21:30:24 +0200, by Ideenmodellierer
-
Removed dependency to protocol setting:Thu, 10 Aug 2023 21:27:58 +0200, by Ideenmodellierer
-
Update RTE version numberThu, 10 Aug 2023 21:24:04 +0200, by Ideenmodellierer
-
Cleanup warningsTue, 08 Aug 2023 17:29:03 +0200, by Ideenmodellierer
-
Added CO2 mirrow instance:Mon, 07 Aug 2023 20:32:42 +0200, by Ideenmodellierer
-
Migrated CO2 protocol implementation to new format:Mon, 07 Aug 2023 20:29:44 +0200, by Ideenmodellierer
-
Use mirror sensortype for visualization:Mon, 31 Jul 2023 20:10:27 +0200, by Ideenmodellierer
-
Expanded Sensor map structure:Mon, 31 Jul 2023 20:00:06 +0200, by Ideenmodellierer
-
Moved DiveO2 sensor specific funtionality into separated file:Mon, 31 Jul 2023 19:50:36 +0200, by Ideenmodellierer
-
Restructure UART based sensor handling:Mon, 31 Jul 2023 19:46:29 +0200, by Ideenmodellierer
-
Bugfix PSCR Settings in Simulator Mode:Thu, 27 Jul 2023 21:52:19 +0200, by Ideenmodellierer
-
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;Sat, 05 Aug 2023 11:52:08 +0200, by heinrichsweikamp
-
update current build for testingWed, 02 Aug 2023 08:41:03 +0200, by heinrichsweikamp
-
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.Tue, 25 Jul 2023 14:48:58 +0200, by heinrichsweikamp
-
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.Wed, 12 Jul 2023 10:13:25 +0200, by heinrichsweikamp
-
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)Tue, 04 Jul 2023 14:39:06 +0200, by heinrichsweikamp
-
Dev Bugfx Empty buffer indication and stability improvments:Sun, 04 Jun 2023 21:59:26 +0200, by Ideenmodellierer
-
Cleanup sensor data interface:Sun, 04 Jun 2023 21:54:24 +0200, by Ideenmodellierer
-
Change support from Pyroscience -> DiveO2 sensorsWed, 31 May 2023 08:44:07 +0200, by heinrichsweikamp
-
Bugfixloop UART multiplexer integration:Tue, 30 May 2023 18:44:20 +0200, by Ideenmodellierer
-
Update digital O2 sensor information:Mon, 29 May 2023 20:26:38 +0200, by Ideenmodellierer
-
Sensor status support for multiplexed DiveO2 sensors:Mon, 29 May 2023 20:22:15 +0200, by Ideenmodellierer
-
Update real multiplexer implementation:Mon, 29 May 2023 18:26:55 +0200, by Ideenmodellierer
-
Discovery<=>SmallCPU inferface update:Tue, 23 May 2023 21:50:19 +0200, by Ideenmodellierer
-
Added UART multiplexer support for DiveO2:Tue, 23 May 2023 21:45:34 +0200, by Ideenmodellierer
-
Zusammenf?hrenMon, 22 May 2023 09:15:09 +0200, by heinrichsweikamp
-
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)Mon, 22 May 2023 09:14:27 +0200, by heinrichsweikamp
-
Add support for a configurable compass declination in a range of -99 to 99 degrees.Thu, 18 May 2023 09:49:17 +0200, by heinrichsweikamp
-
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.Thu, 11 May 2023 12:13:03 +0200, by heinrichsweikamp
-
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)Wed, 10 May 2023 16:25:39 +0200, by heinrichsweikamp
-
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)Wed, 10 May 2023 16:24:57 +0200, by heinrichsweikamp
-
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.Fri, 21 Apr 2023 09:48:23 +0200, by heinrichsweikamp
-
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.Fri, 21 Apr 2023 09:47:06 +0200, by heinrichsweikamp
-
1.6.2 releaseThu, 13 Apr 2023 09:35:43 +0200, by heinrichsweikamp
-
Update build for testingWed, 12 Apr 2023 09:56:00 +0200, by heinrichsweikamp
-
change button default responsiveness to 100Wed, 12 Apr 2023 09:30:15 +0200, by heinrichsweikamp
-
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.Wed, 12 Apr 2023 09:24:44 +0200, by heinrichsweikamp
-
Update build for testingMon, 27 Mar 2023 10:04:53 +0200, by heinrichsweikamp
-
increase HAL_Delay to 10ms for cold-start-button resetSun, 26 Mar 2023 18:34:30 +0200, by heinrichsweikamp
-
Preparing a 1.6.2 release candidateSun, 26 Mar 2023 11:27:29 +0200, by heinrichsweikamp
-
Fix/handle negative scrubber timer valuesTue, 21 Mar 2023 12:57:37 +0100, by heinrichsweikamp
-
Quit simualted dives after the dive time set in the SIM tab.Tue, 21 Mar 2023 12:56:54 +0100, by heinrichsweikamp
-
Some compass improvements from mikellerFri, 17 Mar 2023 09:35:25 +0100, by heinrichsweikamp
-
- Colours for scrubber display when time remaining falls below a threshold valueWed, 15 Mar 2023 09:18:07 +0100, by heinrichsweikamp
-
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:Tue, 07 Mar 2023 22:14:20 +0100, by Ideenmodellierer
-
Added visualization of CO2 during dive:Tue, 07 Mar 2023 20:02:05 +0100, by Ideenmodellierer
-
Cleanup display of multiple warnings in T3 (Big font) view:Tue, 07 Mar 2023 19:59:02 +0100, by Ideenmodellierer
-
Only show autodetection in sensor menu if external interface is present:Tue, 07 Mar 2023 19:55:13 +0100, by Ideenmodellierer
-
Updated outdated commentTue, 07 Mar 2023 19:52:18 +0100, by Ideenmodellierer
-
Dev Bugfix: Alignment problem in lifedata structure:Tue, 07 Mar 2023 19:51:30 +0100, by Ideenmodellierer
-
resolv mergeMon, 13 Mar 2023 22:23:00 +0100, by Ideenmodellierer
-
Avoid blinking in customer view selection page:Sun, 05 Mar 2023 22:17:32 +0100, by Ideenmodellierer
-
Added enum for Co2 displayMon, 13 Mar 2023 22:18:28 +0100, by Ideenmodellierer
-
Added display of co2 ppm values:Sun, 05 Mar 2023 22:14:53 +0100, by Ideenmodellierer
-
Added pressure compensation to CO2 detection:Sun, 05 Mar 2023 22:06:47 +0100, by Ideenmodellierer
-
Code cleanup sensors under development:Tue, 21 Feb 2023 21:19:31 +0100, by Ideenmodellierer
-
Update Sentinel protocol:Sun, 19 Feb 2023 21:52:02 +0100, by Ideenmodellierer
-
Added DiveO2 fatal error detection:Sun, 19 Feb 2023 21:51:19 +0100, by Ideenmodellierer
-
Enable start dive in Big font display:Sun, 19 Feb 2023 21:48:47 +0100, by Ideenmodellierer
-
Update Sentinel protocol:Sun, 19 Feb 2023 21:43:24 +0100, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:Thu, 02 Feb 2023 17:35:54 +0100, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:Thu, 02 Feb 2023 17:35:38 +0100, by Ideenmodellierer
-
Enable start dive in Big font display:Thu, 02 Feb 2023 17:26:54 +0100, by Ideenmodellierer
-
Added data init function for external interface:Thu, 02 Feb 2023 17:19:24 +0100, by Ideenmodellierer
-
NEW: Add mini compass with marker declination indicationMon, 06 Mar 2023 16:03:00 +0100, by heinrichsweikamp
-
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gasFri, 03 Mar 2023 10:41:44 +0100, by heinrichsweikamp
-
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gasTue, 14 Feb 2023 10:21:56 +0100, by heinrichsweikamp
-
Removed interface selection from sensor menu:Sun, 15 Jan 2023 21:51:54 +0100, by Ideenmodellierer
-
Optical sensor as default:Sun, 15 Jan 2023 21:48:34 +0100, by Ideenmodellierer
-
Fix compiler switch:Sun, 15 Jan 2023 21:45:14 +0100, by Ideenmodellierer
-
Improvment sensor Autodetection:Sun, 15 Jan 2023 21:43:33 +0100, by Ideenmodellierer
-
Update sensor menu support for automatic sensor detection:Sat, 14 Jan 2023 20:49:40 +0100, by Ideenmodellierer
-
Added auto detection functionality for sensors connected to the external interface:Sat, 14 Jan 2023 20:46:17 +0100, by Ideenmodellierer
-
Added sensor map to Firmware <=> RTE inferface:Sat, 14 Jan 2023 20:41:36 +0100, by Ideenmodellierer
-
Enabled CO2 support for beta test phase:Sat, 14 Jan 2023 20:37:20 +0100, by Ideenmodellierer
-
Bugfix data synchronization after RTE start:Sat, 14 Jan 2023 20:35:40 +0100, by Ideenmodellierer
-
Update CO2 sensor implementation:Sat, 07 Jan 2023 18:11:52 +0100, by Ideenmodellierer
-
Development feature: external pressure sensorThu, 05 Jan 2023 18:30:06 +0100, by Ideenmodellierer
-
DigO2 added raw data request:Thu, 05 Jan 2023 18:27:04 +0100, by Ideenmodellierer
-
Show saturation in large font (T3) view:Thu, 05 Jan 2023 18:25:47 +0100, by Ideenmodellierer
-
DigO2 added raw data request:Thu, 05 Jan 2023 18:22:21 +0100, by Ideenmodellierer
-
Bugfix set date (year):Tue, 03 Jan 2023 19:47:12 +0100, by Ideenmodellierer
-
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)Sun, 27 Nov 2022 15:18:00 +0100, by heinrichsweikamp
-
Updated menu structure to support new sensor information page:Sun, 20 Nov 2022 20:49:41 +0100, by Ideenmodellierer
-
Added new info page for extended sensor data:Sun, 20 Nov 2022 20:46:10 +0100, by Ideenmodellierer
-
Added customizable data area for specific sensor data:Sun, 20 Nov 2022 20:43:04 +0100, by Ideenmodellierer
-
Increased version number and set beta labelSun, 20 Nov 2022 20:42:33 +0100, by Ideenmodellierer
-
Added customizable data area for specific sensor data:Sun, 20 Nov 2022 20:42:08 +0100, by Ideenmodellierer
-
Increased version number and set beta labelSun, 20 Nov 2022 20:37:44 +0100, by Ideenmodellierer
-
Bugfix PSCR menu button label:Sun, 20 Nov 2022 20:36:34 +0100, by Ideenmodellierer
-
Development bugfix number of spare bytes in setting structureTue, 08 Nov 2022 22:16:56 +0100, by Ideenmodellierer
-
Extension scrubber time:Tue, 08 Nov 2022 21:16:17 +0100, by Ideenmodellierer
-
Bugfix compass bearing:Tue, 08 Nov 2022 21:13:14 +0100, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:Thu, 03 Nov 2022 20:44:51 +0100, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:Thu, 03 Nov 2022 20:44:21 +0100, by Ideenmodellierer
-
Bugfix: only reset menu if a new sub menu is created:Thu, 03 Nov 2022 20:37:06 +0100, by Ideenmodellierer
-
Bugfix release frame:Tue, 01 Nov 2022 09:55:45 +0100, by Ideenmodellierer
-
Added protocol functions for UART DiveO2 sensor:Fri, 28 Oct 2022 20:49:21 +0200, by Ideenmodellierer
-
Added selection of digital o2 sensor source to HW menu:Fri, 28 Oct 2022 20:32:24 +0200, by Ideenmodellierer
-
Added digital o2 sensor to settings and data exchange:Fri, 28 Oct 2022 20:29:37 +0200, by Ideenmodellierer
-
Bugfix display of deactivated sensors:Fri, 28 Oct 2022 19:39:20 +0200, by Ideenmodellierer
-
Bugfix motioncontrol frame deactivation:Tue, 18 Oct 2022 21:21:32 +0200, by Ideenmodellierer
-
Cleanup warnings:Tue, 18 Oct 2022 20:56:19 +0200, by Ideenmodellierer
-
Bugfix Empty menu:Sun, 25 Sep 2022 21:13:45 +0200, by Ideenmodellierer
-
Improvment key event detection:Sun, 25 Sep 2022 21:09:18 +0200, by Ideenmodellierer
-
MergeFri, 19 Aug 2022 11:30:24 +0200, by heinrichsweikamp
-
Improvment charge percent visualization: BetatestFri, 05 Aug 2022 16:04:52 +0200, by Ideenmodellierer
-
Added compile switch for Sentinel rebreather option BetatestFri, 05 Aug 2022 15:27:01 +0200, by Ideenmodellierer
-
Added sanity check for temperature and pressure values: BetatestFri, 05 Aug 2022 15:13:29 +0200, by Ideenmodellierer
-
Bugfix automatic switch to o2 sensor custom view: BetatestWed, 03 Aug 2022 18:19:03 +0200, by Ideenmodellierer
-
Ignore automatic setpoint changes during ascend: BetatestThu, 02 Jun 2022 20:24:59 +0200, by Ideenmodellierer
-
Bugfix: Set actual gas after basic dive settings were created: BetatestMon, 16 May 2022 20:50:26 +0200, by Ideenmodellierer
-
Bugfix low ppO2 warning in bailout mode: BetatestMon, 25 Apr 2022 21:15:01 +0200, by Ideenmodellierer
-
Bugfix screen clipping (Flipdisplay mode): BetatestMon, 25 Apr 2022 21:10:10 +0200, by Ideenmodellierer
-
Bugfix: deco planner did not initialize properly BetatestThu, 21 Apr 2022 21:02:50 +0200, by Jan Mulder
-
Bugfix: Missing flip screen support for charge view BetatestWed, 30 Mar 2022 18:07:21 +0200, by Ideenmodellierer
-
Show 98% in case of Oxygen as the calibrating gas BetatestWed, 30 Mar 2022 18:00:21 +0200, by heinrichsweikamp
-
Support of unknown charging counter values: BetatestSat, 12 Mar 2022 22:58:22 +0100, by Ideenmodellierer
-
Reduce display brightness in case the charger is connected: BetatestSat, 12 Mar 2022 22:54:26 +0100, by Ideenmodellierer
-
increase version numbers for upcomming release BetatestSat, 12 Mar 2022 14:57:54 +0100, by heinrichsweikamp
-
Stability improvment bluetooth startup: BetatestTue, 21 Dec 2021 19:36:41 +0100, by Ideenmodellierer
-
Undo Rev. 660Mon, 01 Nov 2021 12:39:34 +0100, by heinrichs weikamp
-
Add option to reset bluetooth nameSun, 08 Aug 2021 09:36:23 +0200, by heinrichsweikamp
-
Update build file for testingWed, 28 Apr 2021 09:47:25 +0200, by heinrichs weikamp
-
Bugfix handling of new menu tab in flipped mode:Tue, 27 Apr 2021 21:29:26 +0200, by Ideenmodellierer
-
Update release dateMon, 26 Apr 2021 15:03:04 +0200, by heinrichs weikamp
-
Added visualization of scrubber time:Sun, 25 Apr 2021 20:47:01 +0200, by Ideenmodellierer
-
Added count down timer for scrubber time:Sun, 25 Apr 2021 20:42:56 +0200, by Ideenmodellierer
-
Introduced new menu tab for addition CCR options:Sun, 25 Apr 2021 20:41:19 +0200, by Ideenmodellierer
-
Bugfix temperature display Logpage2:Sun, 25 Apr 2021 20:36:18 +0200, by Ideenmodellierer
-
Allow setpoint starting at 0.4 ppO2:Mon, 19 Apr 2021 20:34:53 +0200, by Ideenmodellierer
-
Automatik setpoint change:Mon, 19 Apr 2021 20:20:38 +0200, by Ideenmodellierer
-
Automatik setpoint change:Mon, 19 Apr 2021 20:19:32 +0200, by Ideenmodellierer
-
Bugfix consider checkbox in calculation of right aligned and centered position:Mon, 19 Apr 2021 20:16:24 +0200, by Ideenmodellierer
-
Motion detection: Enable focus after focus calibration:Mon, 19 Apr 2021 20:14:20 +0200, by Ideenmodellierer
-
Integrated selection of bailout in the diluent selection page:Tue, 13 Apr 2021 19:25:41 +0200, by Ideenmodellierer
-
Remove battery charge counter from information menu:Tue, 13 Apr 2021 19:21:14 +0200, by Ideenmodellierer
-
Small changes in charger state handling:Tue, 13 Apr 2021 19:18:32 +0200, by Ideenmodellierer
-
Compile with ENABLE_CHARGER_STATUS_V2Tue, 30 Mar 2021 10:34:12 +0200, by heinrichs weikamp
-
Reimplemented charger status generation (deactivated):Wed, 24 Mar 2021 22:06:00 +0100, by Ideenmodellierer
-
Do not show focus indicator in case motion detection is suspended:Wed, 24 Mar 2021 21:28:41 +0100, by Ideenmodellierer
-
Development Bugfix Deco bars not shown after last deco stop passed:Thu, 11 Mar 2021 21:45:22 +0100, by Ideenmodellierer
-
Development bugfix Viewport settings:Thu, 11 Mar 2021 21:43:43 +0100, by Ideenmodellierer
-
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6Thu, 25 Feb 2021 12:20:43 +0100, by heinrichsweikamp
-
Added last measured PPO2 value to sensor selection dialog:Wed, 24 Feb 2021 21:45:35 +0100, by Ideenmodellierer
-
Debounce fallback warning:Wed, 24 Feb 2021 21:04:07 +0100, by Ideenmodellierer
-
Debounce fallback warning:Wed, 24 Feb 2021 21:03:54 +0100, by Ideenmodellierer
-
Debounce fallback warning:Wed, 24 Feb 2021 21:03:22 +0100, by Ideenmodellierer
-
Enable sensor check for Analog PPO2 mode:Wed, 24 Feb 2021 19:18:26 +0100, by Ideenmodellierer
-
Added menu structure to allow ppo2 modification in simulator mode:Tue, 23 Feb 2021 21:58:18 +0100, by Ideenmodellierer
-
Warnings:Tue, 23 Feb 2021 21:55:52 +0100, by Ideenmodellierer
-
Warnings:Tue, 23 Feb 2021 21:55:26 +0100, by Ideenmodellierer
-
Warnings:Tue, 23 Feb 2021 21:54:56 +0100, by Ideenmodellierer
-
Added functionality to add ppo2 mV offset:Tue, 23 Feb 2021 21:53:24 +0100, by Ideenmodellierer
-
Added compile switch for T3_PROFILE menu operation optionFri, 12 Feb 2021 21:46:36 +0100, by Ideenmodellierer
-
Improve in / out of focus transitions:Fri, 12 Feb 2021 21:43:27 +0100, by Ideenmodellierer
-
Added option to select sensitivity of focus detection:Fri, 12 Feb 2021 21:37:50 +0100, by Ideenmodellierer
-
Switch Sector / Scroll detection to vector implementation:Mon, 08 Feb 2021 21:35:46 +0100, by Ideenmodellierer
-
Development bugfix: Marker in standard t3 view drawn in wrong directionSun, 07 Feb 2021 22:05:32 +0100, by Ideenmodellierer
-
Improvment frame Handling:Sun, 07 Feb 2021 22:04:43 +0100, by Ideenmodellierer
-
Adjustments for flipped display view:Wed, 03 Feb 2021 21:45:48 +0100, by Ideenmodellierer
-
Use roll and pitch agles in 0-360 format:Wed, 03 Feb 2021 21:44:22 +0100, by Ideenmodellierer
-
Added minilog functions to allow marker synchronisation:Wed, 27 Jan 2021 22:12:44 +0100, by Ideenmodellierer
-
Added t3 quick menu for marker synchronisation:Wed, 27 Jan 2021 22:10:11 +0100, by Ideenmodellierer
-
Development bugfix: focus state not remembered:Wed, 27 Jan 2021 22:04:45 +0100, by Ideenmodellierer
-
Development bugfix: Low battery warning was interpretated as marker:Wed, 27 Jan 2021 22:03:11 +0100, by Ideenmodellierer
-
Development bugfix: show replay symbol only for the selected dive:Wed, 27 Jan 2021 21:58:46 +0100, by Ideenmodellierer
-
Moved non critical functions from timer interrupt to main loop:Wed, 27 Jan 2021 21:56:48 +0100, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:Wed, 20 Jan 2021 20:05:05 +0100, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:Fri, 15 Jan 2021 21:33:07 +0100, by Ideenmodellierer
-
Bugfix inverted whitspace:Fri, 15 Jan 2021 21:20:29 +0100, by Ideenmodellierer
-
Suspend MotionDetection events while diver is operationg the OSTC:Thu, 14 Jan 2021 21:25:15 +0100, by Ideenmodellierer
-
Added access to logbook marker data:Thu, 14 Jan 2021 20:38:28 +0100, by Ideenmodellierer
-
Bugfix: CalibViewport were shown even in case the compile switch had not been set:Thu, 14 Jan 2021 19:17:28 +0100, by Ideenmodellierer
-
Update RTE required value for releaseFri, 05 Feb 2021 14:53:50 +0100, by heinrichsweikamp
-
Added tag v1.5.6 release for changeset 06ec1da5e105Fri, 05 Feb 2021 14:50:18 +0100, by heinrichsweikamp
-
change O2_CALIB_FRACTION_O2 to 0.98Thu, 07 Jan 2021 09:53:04 +0100, by heinrichsweikamp
-
Merged menu items of viewport and motion control:Wed, 06 Jan 2021 21:01:00 +0100, by Ideenmodellierer
-
T3 profile view: Added visualization of deco dataWed, 06 Jan 2021 19:41:43 +0100, by Ideenmodellierer
-
Added replay data scaling in case life data is longer than replay blockTue, 05 Jan 2021 20:35:01 +0100, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:Mon, 04 Jan 2021 22:49:07 +0100, by Ideenmodellierer
-
Added compile switch for new T3 View ProfileMon, 04 Jan 2021 22:45:37 +0100, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:Mon, 04 Jan 2021 21:48:31 +0100, by Ideenmodellierer
-
New replay block for T3 profile:Mon, 04 Jan 2021 21:41:51 +0100, by Ideenmodellierer
-
MotionControl-Sector: Map sectors during switch T7 <=> T3:Mon, 04 Jan 2021 21:38:28 +0100, by Ideenmodellierer
-
Added functionality to select a dive to be shown in the T3 profile view:Mon, 04 Jan 2021 21:35:38 +0100, by Ideenmodellierer
-
Bugfix Selection of primary view:Mon, 04 Jan 2021 21:32:39 +0100, by Ideenmodellierer
-
Added compile switch for new T3 View ProfileMon, 04 Jan 2021 21:30:04 +0100, by Ideenmodellierer
-
Added PrintGraph option to skip invalid data entries:Mon, 04 Jan 2021 21:24:24 +0100, by Ideenmodellierer
-
MotionCtrl - Sectorview Map sectors directly to custom views:Sun, 03 Jan 2021 14:43:16 +0100, by Ideenmodellierer
-
Minor: Comment translation into EnglishWed, 06 Jan 2021 22:02:49 +0100, by heinrichsweikamp
-
Align VPM tag in log list to be at same position as GF tag:Tue, 22 Dec 2020 22:23:11 +0100, by Ideenmodellierer
-
Minor: Update the documentation for building the codeThu, 17 Dec 2020 10:58:28 +0100, by heinrichsweikamp
-
Update current build, "RTErequired" value and release dateThu, 17 Dec 2020 09:52:12 +0100, by heinrichsweikamp
-
update ostc4pack sample filesWed, 16 Dec 2020 09:43:11 +0100, by heinrichsweikamp
-
Motion control: Jump back to primary view if focus is lost:Sun, 13 Dec 2020 18:31:40 +0100, by Ideenmodellierer
-
Reduced view angle and number of vusiualized custom views in setor mode:Sun, 13 Dec 2020 18:29:12 +0100, by Ideenmodellierer
-
Added option for 100% o2 calibration:Sat, 12 Dec 2020 21:05:11 +0100, by Ideenmodellierer
-
Solved minor warningsSat, 12 Dec 2020 20:54:31 +0100, by Ideenmodellierer
-
Show Fallback if no valid sensor value is available:Sat, 12 Dec 2020 20:52:58 +0100, by Ideenmodellierer
-
Added ex Interface measurement restart in case of i2c disturbance:Sat, 12 Dec 2020 19:18:57 +0100, by Ideenmodellierer
-
Bugfix bad resolution of compass LSM303AGR:Sat, 12 Dec 2020 19:16:37 +0100, by Ideenmodellierer
-
Minor: Functional inert cleanup of some unused variablesThu, 03 Dec 2020 13:17:32 +0100, by heinrichsweikamp
-
Rework pitch detection:Sun, 29 Nov 2020 23:02:11 +0100, by Ideenmodellierer
-
Handle o2 voltage values < 0.5mV as invalid:Sun, 29 Nov 2020 22:58:11 +0100, by Ideenmodellierer
-
Return to o2 values:Sun, 29 Nov 2020 22:55:31 +0100, by Ideenmodellierer
-
Change style of viewport calibration menu:Sun, 29 Nov 2020 22:53:33 +0100, by Ideenmodellierer
-
Improved focus detection:Wed, 25 Nov 2020 20:26:01 +0100, by Ideenmodellierer
-
Update String "Blickwinkel":Wed, 25 Nov 2020 20:19:50 +0100, by Ideenmodellierer
-
Added debug view to viewport calibration:Wed, 25 Nov 2020 20:18:22 +0100, by Ideenmodellierer
-
Reactivate compass parameter stored in NVM:Wed, 25 Nov 2020 20:16:20 +0100, by Ideenmodellierer
-
Try to reduce legth of log entry string:Mon, 30 Nov 2020 20:55:23 +0100, by Ideenmodellierer
-
Added new section "lower.font":Mon, 30 Nov 2020 20:52:49 +0100, by Ideenmodellierer
-
Minor: Update the documentation for building the codeSun, 29 Nov 2020 11:41:03 +0100, by heinrichsweikamp
-
-Add 12HR Time SupportTue, 24 Nov 2020 13:22:23 -0600, by izzni
-
add current buildSat, 21 Nov 2020 17:41:59 +0100, by heinrichsweikamp
-
Bugfix center / right alignment if dualfont is used:Sun, 15 Nov 2020 20:12:19 +0100, by Ideenmodellierer
-
Bugfix One or more deactivated sensors hide sensor display:Sun, 15 Nov 2020 20:09:31 +0100, by Ideenmodellierer
-
Refine o2 sensor diagnostic functions:Sun, 15 Nov 2020 20:01:56 +0100, by Ideenmodellierer
-
Added ADC sensor interface to O2 sensore menu structure:Sun, 15 Nov 2020 19:58:14 +0100, by Ideenmodellierer
-
Solved minor warningsSun, 15 Nov 2020 19:54:36 +0100, by Ideenmodellierer
-
Added O2 sensor source and calibration parameters to setting structureSun, 15 Nov 2020 19:53:09 +0100, by Ideenmodellierer
-
Check if HW evaluation was performed:Sun, 15 Nov 2020 19:52:03 +0100, by Ideenmodellierer
-
Changed operation mode of RecoverSampleIndex:Thu, 12 Nov 2020 20:06:04 +0100, by Ideenmodellierer
-
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:Thu, 12 Nov 2020 20:03:00 +0100, by Ideenmodellierer
-
Switch source of o2 sensor data depending on availability of external ADC:Thu, 12 Nov 2020 19:54:58 +0100, by Ideenmodellierer
-
Added HW_Info to Discovery <=> RTE data exchange:Thu, 12 Nov 2020 19:48:28 +0100, by Ideenmodellierer
-
Added external ADC interface functionality (MCP3424):Thu, 12 Nov 2020 19:46:03 +0100, by Ideenmodellierer
-
Added color indicator for focus state:Sun, 08 Nov 2020 18:49:54 +0100, by Ideenmodellierer
-
Added menu structure to acces viewport calibration:Sun, 08 Nov 2020 18:46:46 +0100, by Ideenmodellierer
-
Added viewport functionality:Sun, 08 Nov 2020 18:43:19 +0100, by Ideenmodellierer
-
Make sure motion detection settings are set to default values:Sun, 08 Nov 2020 18:38:53 +0100, by Ideenmodellierer
-
Only execute motion detection functions if features is enabled:Sun, 08 Nov 2020 18:36:02 +0100, by Ideenmodellierer
-
Update roll and pitch value in simulation mode:Sun, 08 Nov 2020 16:38:43 +0100, by Ideenmodellierer
-
Added viewport calibration to dive menu:Mon, 02 Nov 2020 21:17:45 +0100, by Ideenmodellierer
-
Added new settings for Viewport:Mon, 02 Nov 2020 21:15:42 +0100, by Ideenmodellierer
-
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.hTue, 03 Nov 2020 12:47:51 +0100, by heinrichsweikamp
-
add current buildMon, 02 Nov 2020 12:13:02 +0100, by heinrichsweikamp
-
Shortend t3 view names:Sun, 11 Oct 2020 18:33:19 +0200, by Ideenmodellierer
-
Added new t3 view showing first deco stop and tts in parallel:Sat, 10 Oct 2020 21:02:05 +0200, by Ideenmodellierer
-
Added default view selection and auto return to view to t3 visualization:Sat, 10 Oct 2020 18:34:10 +0200, by Ideenmodellierer
-
Bugfix return from submenu in t3 view:Sat, 10 Oct 2020 18:30:13 +0200, by Ideenmodellierer
-
Added inertia simulation for compass heading:Sat, 10 Oct 2020 16:59:18 +0200, by Ideenmodellierer
-
BugFix firmware downgrade to version with less settings:Sat, 10 Oct 2020 13:51:44 +0200, by Ideenmodellierer
-
Added center / right alignment option to custom text display:Wed, 07 Oct 2020 18:07:10 +0200, by Ideenmodellierer
-
Changed visualization of Depth / temperatur / debugview entryWed, 07 Oct 2020 17:15:27 +0200, by Ideenmodellierer
-
Increased max value for surface pressure:Wed, 07 Oct 2020 17:12:44 +0200, by Ideenmodellierer
-
Added tag 1.5.5 release for changeset 02e7e11fdbe8Sun, 04 Oct 2020 15:50:43 +0200, by heinrichsweikamp
-
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 releaseFri, 25 Sep 2020 11:13:03 +0200, by heinrichsweikamp
-
add current buildWed, 16 Sep 2020 10:52:57 +0200, by heinrichsweikamp
-
Bugfix custom view selection dialog:Tue, 15 Sep 2020 20:57:04 +0200, by Ideenmodellierer
-
Bugfix: No need to consider surface custom view in count of enabled view:Tue, 15 Sep 2020 20:54:54 +0200, by Ideenmodellierer
-
Added skip condition in custom view selection:Tue, 15 Sep 2020 20:52:39 +0200, by Ideenmodellierer
-
Added new option to gas configuration: "Off":Sun, 13 Sep 2020 20:59:38 +0200, by Ideenmodellierer
-
Do not show gases in "Off" state in custom gas list:Sun, 13 Sep 2020 20:58:37 +0200, by Ideenmodellierer
-
Added new option to gas configuration: "Off":Sun, 13 Sep 2020 20:55:54 +0200, by Ideenmodellierer
-
Change color ID used in strings for light grey:Sun, 13 Sep 2020 20:49:58 +0200, by Ideenmodellierer
-
Minor: Removed duplicated definition of number of available gasesSun, 13 Sep 2020 20:44:50 +0200, by Ideenmodellierer
-
Changed string for data view selections:Thu, 10 Sep 2020 20:52:47 +0200, by Ideenmodellierer
-
Added compile switch for motion control:Thu, 10 Sep 2020 20:51:36 +0200, by Ideenmodellierer
-
Move Bigfont and motion Ctrl selection menu out of custom view submenu:Thu, 10 Sep 2020 20:47:48 +0200, by Ideenmodellierer
-
Moved custom view menu to new tab:Tue, 08 Sep 2020 21:24:14 +0200, by Ideenmodellierer
-
Reset Safety Stop display in case of a new descend:Sun, 06 Sep 2020 22:11:51 +0200, by Ideenmodellierer
-
Added T3_gaslist:Sun, 06 Sep 2020 21:17:59 +0200, by Ideenmodellierer
-
Added color coding for cv gas list:Sun, 06 Sep 2020 21:15:34 +0200, by Ideenmodellierer
-
Added quick menu function to big font view:Sun, 06 Sep 2020 21:13:22 +0200, by Ideenmodellierer
-
Added missing display of button labels in refresh function:Sun, 06 Sep 2020 21:09:37 +0200, by Ideenmodellierer
-
Properly send compass 3 into sleepmode (end-2019 hardware)Wed, 16 Sep 2020 10:30:28 +0200, by heinrichsweikamp
-
MergeMon, 31 Aug 2020 20:06:59 +0200, by heinrichsweikamp
-
Added new strings for the selection of T3 custom viewsSun, 30 Aug 2020 17:31:29 +0200, by Ideenmodellierer
-
Minor adaptions in page layout:Sun, 30 Aug 2020 17:30:54 +0200, by Ideenmodellierer
-
Display warning in t7 using centered stringsSun, 30 Aug 2020 17:26:52 +0200, by Ideenmodellierer
-
Show page number in small letters if more than 8 tabs are activeSun, 30 Aug 2020 17:26:00 +0200, by Ideenmodellierer
-
Reimplementation of tMenuEdit_select:Sun, 30 Aug 2020 17:23:44 +0200, by Ideenmodellierer
-
Added new menu tab into call structureSun, 30 Aug 2020 17:20:16 +0200, by Ideenmodellierer
-
Added new top level menu for customization of viewsSun, 30 Aug 2020 17:19:23 +0200, by Ideenmodellierer
-
Removed second big font profileSun, 30 Aug 2020 17:14:31 +0200, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
-
Bugfix display of disabled screen.Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
-
Bugfix display of disabled screen.Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
-
Bugfix right alignment of dualfont stringsMon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combinationMon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
-
Added compile switch to enable / disable new BigFont layoutMon, 24 Aug 2020 19:31:05 +0200, by Ideenmodellierer
-
Added dew parameter to enable selection of customer BigFont screens to be displayedMon, 24 Aug 2020 19:30:15 +0200, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
-
Bugfix display of disabled screen.Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
-
Bugfix display of disabled screen.Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
-
Bugfix right alignment of dualfont stringsMon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combinationMon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
-
Added compiler switch for existing debug view parameterThu, 20 Aug 2020 21:25:38 +0200, by Ideenmodellierer
-
Added tag v1.5.4 release for changeset e9ca66ce36e5Mon, 10 Aug 2020 15:53:45 +0200, by heinrichsweikamp
-
add wiki sub-directoryMon, 29 Jun 2020 16:18:17 +0200, by heinrichsweikamp
-
Added "I2C_DeInit();" in hardware detection routines. It's the recommended waySat, 27 Jun 2020 18:40:32 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)Tue, 26 May 2020 19:27:07 +0000, by heinrichsweikamp
-
Bugfix header EEPROM layout: FixLayout_Header_LogViewTue, 26 May 2020 21:13:12 +0200, by ideenmodellierer
-
Bugfix right alignment of string: FixLayout_Header_LogViewTue, 26 May 2020 21:13:00 +0200, by ideenmodellierer
-
Small corrections layout Divelog page 1: FixLayout_Header_LogViewTue, 26 May 2020 21:12:46 +0200, by ideenmodellierer
-
Development option only read bottledata: FixLayout_Header_LogViewTue, 26 May 2020 21:12:02 +0200, by ideenmodellierer
-
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)Tue, 19 May 2020 07:27:18 +0000, by heinrichsweikamp
-
Bugfix calculation of string center position: Improve_Button_SleepMon, 18 May 2020 21:51:08 +0200, by ideenmodellierer
-
Code cleanup pressure plausibility check: Improve_Button_SleepWed, 13 May 2020 21:56:35 +0200, by ideenmodellierer
-
Bugfix unintended else condition: Improve_Button_SleepWed, 13 May 2020 21:27:30 +0200, by ideenmodellierer
-
Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_SleepTue, 12 May 2020 23:03:50 +0200, by ideenmodellierer
-
Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_SleepTue, 12 May 2020 23:03:29 +0200, by ideenmodellierer
-
Balance value of button responsitivness were not considered during firmware startup: Improve_Button_SleepTue, 12 May 2020 22:54:19 +0200, by ideenmodellierer
-
Added error detection for reading of ADC values in sleep mode: Improve_Button_SleepTue, 12 May 2020 22:42:52 +0200, by ideenmodellierer
-
Do not signal power on reset in case of a "warm" reset: Improve_Button_SleepTue, 12 May 2020 22:39:18 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)Tue, 28 Apr 2020 15:37:47 +0000, by heinrichsweikamp
-
bugfix: implement battery charge percentage in dive header fix-bat-2Wed, 22 Apr 2020 13:08:57 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)Wed, 15 Apr 2020 07:01:11 +0000, by heinrichsweikamp
-
Removed no longer needed reset profile function: Improve_LogtansferTue, 14 Apr 2020 19:45:34 +0200, by ideenmodellierer
-
Moved and deactivated analyse sample buffer switch: Improve_LogtansferTue, 14 Apr 2020 19:44:19 +0200, by ideenmodellierer
-
Cmd Get profile: transmit dummy profile if necessary Improve_LogtansferTue, 14 Apr 2020 19:29:23 +0200, by ideenmodellierer
-
Removed invalidate header function because it is no lonnger needed Improve_LogtansferTue, 14 Apr 2020 19:27:04 +0200, by ideenmodellierer
-
Compare profile length from header and sample data to identify valid profiles Improve_LogtansferTue, 14 Apr 2020 19:22:56 +0200, by ideenmodellierer
-
Added compile switch to handle additional data during raw header request: Improve_LogtansferMon, 13 Apr 2020 16:00:54 +0200, by ideenmodellierer
-
Added function to transfer sample buffer: Improve_LogtansferSun, 12 Apr 2020 21:02:34 +0200, by ideenmodellierer
-
Power-down Bluetooth on COMM exitWed, 08 Apr 2020 16:34:54 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)Mon, 30 Mar 2020 13:16:11 +0000, by heinrichsweikamp
-
merged default into minor_improvments minor_improvmentsSun, 29 Mar 2020 21:55:00 +0200, by Ideenmodellierer
-
Activated reset of sample information within header data at time of sector erasing: minor_improvmentsSun, 29 Mar 2020 21:39:57 +0200, by ideenmodellierer
-
Added ppO2 to dummy profile data: minor_improvmentsSat, 28 Mar 2020 21:41:47 +0100, by ideenmodellierer
-
Eliminated some minor warnings minor_improvmentsTue, 24 Mar 2020 22:32:48 +0100, by ideenmodellierer
-
Transfer a dummy profile in case of missing sample information: minor_improvmentsTue, 24 Mar 2020 22:14:16 +0100, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvmentsTue, 24 Mar 2020 22:12:08 +0100, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvmentsTue, 24 Mar 2020 22:08:29 +0100, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvmentsTue, 24 Mar 2020 21:59:38 +0100, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvmentsTue, 24 Mar 2020 21:59:11 +0100, by ideenmodellierer
-
Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvmentsTue, 24 Mar 2020 21:49:52 +0100, by ideenmodellierer
-
Added new compile switches for variants: minor_improvmentsTue, 24 Mar 2020 21:48:27 +0100, by ideenmodellierer
-
Added initialization of bottle sensor data age counter minor_improvmentsMon, 23 Mar 2020 21:14:54 +0100, by ideenmodellierer
-
Added compile switch to show voltage parallel to charge status percantage minor_improvmentsMon, 23 Mar 2020 21:13:52 +0100, by ideenmodellierer
-
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvmentsMon, 23 Mar 2020 21:10:02 +0100, by ideenmodellierer
-
Introduced configuration header for variant managment: minor_improvmentsThu, 05 Mar 2020 22:31:50 +0100, by ideenmodellierer
-
Removed duplicated definition: minor_improvmentsThu, 05 Mar 2020 22:27:55 +0100, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvmentsSat, 29 Feb 2020 22:27:29 +0100, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvmentsSat, 29 Feb 2020 22:27:04 +0100, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvmentsSat, 29 Feb 2020 22:25:20 +0100, by ideenmodellierer
-
fix potential issue with >255 dives in the logbookSun, 01 Mar 2020 10:06:45 +0100, by heinrichsweikamp
-
Added tag v1.5.3 release for changeset 5b4c78c36b04Thu, 27 Feb 2020 09:13:25 +0100, by heinrichsweikamp
-
update the 1.5.3 for testsMon, 24 Feb 2020 15:17:54 +0100, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)Mon, 24 Feb 2020 07:58:37 +0000, by heinrichsweikamp
-
Moved power on detection to RTE: Improve_BatteryGasGaugeSun, 23 Feb 2020 21:18:49 +0100, by ideenmodellierer
-
Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGaugeSun, 23 Feb 2020 21:17:17 +0100, by ideenmodellierer
-
Reduced timeout for common UART communication: Improve_BatteryGasGaugeSun, 23 Feb 2020 21:13:28 +0100, by ideenmodellierer
-
Detect startup after power off: Improve_BatteryGasGaugeSun, 23 Feb 2020 21:09:56 +0100, by ideenmodellierer
-
show battery percent and voltage and surfacemode. That gives additionalTue, 18 Feb 2020 12:41:45 +0100, by heinrichsweikamp
-
make a 1.5.3 for testsTue, 18 Feb 2020 09:58:52 +0100, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)Tue, 18 Feb 2020 07:20:29 +0000, by heinrichsweikamp
-
Marked possible code improvment for future activities: ImprovmentNVM_2Mon, 17 Feb 2020 19:43:09 +0100, by ideenmodellierer
-
Activated ringbuffer for settings: ImprovmentNVM_2Mon, 17 Feb 2020 19:04:10 +0100, by ideenmodellierer
-
Activated ringbuffer for settings: ImprovmentNVM_2Sun, 16 Feb 2020 22:04:52 +0100, by ideenmodellierer
-
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2Sat, 15 Feb 2020 20:50:58 +0100, by ideenmodellierer
-
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2Sat, 15 Feb 2020 20:50:20 +0100, by ideenmodellierer
-
Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2Sat, 15 Feb 2020 20:45:19 +0100, by ideenmodellierer
-
ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2Mon, 10 Feb 2020 19:40:33 +0100, by ideenmodellierer
-
Moved Timeout handling out of 100ms callback: ImprovmentNVM_2Mon, 10 Feb 2020 19:29:12 +0100, by ideenmodellierer
-
Enable sequentionel writing of device data: ImprovmentNVM_2Mon, 10 Feb 2020 19:25:09 +0100, by ideenmodellierer
-
Optimize ef_write_block function: ImprovmentNVM_2Mon, 10 Feb 2020 19:15:27 +0100, by ideenmodellierer
-
Merged in janlmulder/ostc4/maintain-2 (pull request #38)Mon, 10 Feb 2020 08:23:15 +0000, by heinrichsweikamp
-
Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2Fri, 07 Feb 2020 16:38:11 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)Wed, 15 Jan 2020 10:53:15 +0000, by heinrichsweikamp
-
merged default into Improvment_NVM Improment_NVMTue, 14 Jan 2020 21:52:15 +0100, by Ideenmodellierer
-
Added compile switch for restoring of last known date after power lost: Improment_NVMTue, 14 Jan 2020 21:38:45 +0100, by ideenmodellierer
-
Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVMTue, 14 Jan 2020 21:10:37 +0100, by ideenmodellierer
-
Bugfix: Warnings displayed in Gauge Mode: Improment_NVMTue, 14 Jan 2020 21:08:45 +0100, by ideenmodellierer
-
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVMMon, 13 Jan 2020 20:27:57 +0100, by ideenmodellierer
-
Bugfix display compass calibration frozen: Improment_NVMSun, 12 Jan 2020 21:33:13 +0100, by ideenmodellierer
-
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVMSun, 12 Jan 2020 19:55:22 +0100, by ideenmodellierer
-
Bugfix invalid voltage / temperatur after coldstart: Improment_NVMSun, 12 Jan 2020 19:50:14 +0100, by ideenmodellierer
-
Bugfix parallel call of external flash functions: Improment_NVMSun, 12 Jan 2020 18:06:59 +0100, by ideenmodellierer
-
Bugfix Min max values for device data checks: Improment_NVMSun, 12 Jan 2020 17:57:11 +0100, by ideenmodellierer
-
Bugfix: display of time of minimum voltag: Improment_NVMSun, 12 Jan 2020 17:45:36 +0100, by ideenmodellierer
-
We got one report of false/freezd depth reading when jumping into 2m depthWed, 08 Jan 2020 15:35:15 +0100, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)Sun, 05 Jan 2020 14:57:50 +0000, by heinrichsweikamp
-
merged default into ImproveBluetooth ImproveBluetoothSun, 29 Dec 2019 09:42:16 +0100, by Ideenmodellierer
-
Added retry through power off/on cycle: ImproveBluetoothSat, 28 Dec 2019 19:42:04 +0100, by ideenmodellierer
-
Revert change to keep connection open in case of BlueMod messages: ImproveBluetoothSat, 21 Dec 2019 20:21:26 +0100, by ideenmodellierer
-
Bugfix: Merge / cleanup problem: ImproveBluetoothMon, 02 Dec 2019 22:03:05 +0100, by ideenmodellierer
-
Added missing enum for configuration states ImproveBluetoothSun, 01 Dec 2019 19:55:15 +0100, by ideenmodellierer
-
Added function for BlueMod configuration: ImproveBluetoothTue, 26 Nov 2019 22:12:25 +0100, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetoothTue, 26 Nov 2019 21:17:57 +0100, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetoothTue, 26 Nov 2019 21:16:36 +0100, by ideenmodellierer
-
Configurate FlowCntrl Pins as noPull ImproveBluetoothTue, 26 Nov 2019 21:14:58 +0100, by ideenmodellierer
-
Move Constants and libm to start of firmware ROM block: ImproveBluetoothTue, 26 Nov 2019 18:02:48 +0100, by ideenmodellierer
-
Merged in janlmulder/ostc4/maintain-1 (pull request #35)Mon, 02 Dec 2019 07:56:47 +0000, by heinrichsweikamp
-
Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1Sun, 01 Dec 2019 17:12:27 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)Sun, 24 Nov 2019 15:46:58 +0000, by heinrichsweikamp
-
Added key direction awarness to t3, t5 and t6 views: MotionDetectionMon, 21 Oct 2019 21:16:53 +0200, by ideenmodellierer
-
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetectionMon, 21 Oct 2019 18:37:43 +0200, by ideenmodellierer
-
Consider number of available t3 views in sector handling: MotionDetectionThu, 17 Oct 2019 23:09:17 +0200, by ideenmodellierer
-
Combine variables in a structure to improve readability of code MotionDetectionThu, 17 Oct 2019 21:15:42 +0200, by ideenmodellierer
-
Simplified pitch detection state machine: MotionDetectionThu, 10 Oct 2019 22:11:59 +0200, by ideenmodellierer
-
Added missing customerview selection MotionDetectionMon, 16 Sep 2019 22:49:34 +0200, by ideenmodellierer
-
Incremented "idle window" for scroll detection MotionDetectionMon, 16 Sep 2019 22:46:24 +0200, by ideenmodellierer
-
Motion events effect custom view in dive mode only MotionDetectionMon, 16 Sep 2019 20:57:40 +0200, by ideenmodellierer
-
Added string for Empty/ Debug custom view selection MotionDetectionMon, 16 Sep 2019 20:21:06 +0200, by ideenmodellierer
-
Use Enum values for initialization and setting check: MotionDetectionTue, 10 Sep 2019 20:51:55 +0200, by ideenmodellierer
-
Add scroll event by pitch angle detection: MotionDetectionSun, 08 Sep 2019 13:45:17 +0200, by ideenmodellierer
-
merged default into MotionDetection MotionDetectionMon, 19 Aug 2019 17:50:55 +0200, by Ideenmodellierer
-
Added parameter for number of sectors to be defined MotionDetectionMon, 19 Aug 2019 17:39:47 +0200, by ideenmodellierer
-
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetectionTue, 13 Aug 2019 21:13:54 +0200, by ideenmodellierer
-
Added a function to count the active custom views. MotionDetectionTue, 13 Aug 2019 21:12:17 +0200, by ideenmodellierer
-
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetectionTue, 13 Aug 2019 21:10:46 +0200, by ideenmodellierer
-
Fix misalignment of do while loop MotionDetectionMon, 17 Jun 2019 19:56:38 +0200, by ideenmodellierer
-
Bugfix: selection of current view not working MotionDetectionMon, 17 Jun 2019 19:53:01 +0200, by ideenmodellierer
-
Update call of motion detection function MotionDetectionMon, 17 Jun 2019 19:47:07 +0200, by ideenmodellierer
-
Pass action to customer vie update function. MotionDetectionTue, 11 Jun 2019 05:30:09 +0200, by Ideenmodellierer
-
Added trigger of middle button action in case of a detected shake MotionDetectionFri, 24 May 2019 22:01:46 +0200, by ideenmodellierer
-
Added new files for motion detection (shaking) detection MotionDetectionFri, 24 May 2019 22:00:38 +0200, by ideenmodellierer
-
Add Support for new end-2019 hardware:Sun, 24 Nov 2019 16:08:29 +0100, by heinrichsweikamp
-
Add Support for new end-2019 hardware:Sat, 23 Nov 2019 18:39:50 +0100, by heinrichsweikamp
-
Add Support for new end-2019 hardware:Sat, 23 Nov 2019 15:36:38 +0100, by heinrichsweikamp
-
Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 releaseWed, 09 Oct 2019 20:05:47 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)Wed, 09 Oct 2019 07:08:43 +0000, by heinrichsweikamp
-
Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-messTue, 08 Oct 2019 16:41:57 +0200, by Jan Mulder
-
MergeSun, 06 Oct 2019 14:12:41 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)Sun, 06 Oct 2019 11:58:36 +0000, by heinrichsweikamp
-
Decrease ManualExitDiveCounter in surface mode FlightMode_ImprovmentThu, 03 Oct 2019 21:39:28 +0200, by ideenmodellierer
-
Minor changes to debug view FlightMode_ImprovmentThu, 03 Oct 2019 21:34:52 +0200, by ideenmodellierer
-
Added option to manually leave dive mode to system menu FlightMode_ImprovmentThu, 03 Oct 2019 21:33:47 +0200, by ideenmodellierer
-
Added function to support manuel exit of dive mode FlightMode_ImprovmentThu, 03 Oct 2019 21:30:16 +0200, by ideenmodellierer
-
Added function to evaluate the state of the surface pressure history memory FlightMode_ImprovmentThu, 03 Oct 2019 21:26:46 +0200, by ideenmodellierer
-
Removed not used wireless menu items FlightMode_ImprovmentTue, 01 Oct 2019 19:58:58 +0200, by ideenmodellierer
-
Added compile switch to enable debug view option in system menu FlightMode_ImprovmentTue, 01 Oct 2019 19:43:30 +0200, by ideenmodellierer
-
Removed averaging of pressure and temperatur values FlightMode_ImprovmentTue, 01 Oct 2019 19:13:41 +0200, by ideenmodellierer
-
change max. allowed surface pressure to 1030hPa (As in the small OSTC)Sun, 06 Oct 2019 14:07:51 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)Mon, 19 Aug 2019 11:42:31 +0000, by heinrichsweikamp
-
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_ImprovmentSat, 17 Aug 2019 19:03:47 +0200, by ideenmodellierer
-
Added function to avoid divemode activation during Landing: PressureMeasure_ImprovmentSat, 17 Aug 2019 18:57:15 +0200, by ideenmodellierer
-
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:47:08 +0200, by ideenmodellierer
-
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:44:43 +0200, by ideenmodellierer
-
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_ImprovmentTue, 13 Aug 2019 21:46:26 +0200, by ideenmodellierer
-
add update files for testing purposesSat, 20 Jul 2019 10:44:01 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)Thu, 18 Jul 2019 14:26:56 +0000, by heinrichsweikamp
-
Added plausibility check for pressure values I2C_ImprovmentWed, 17 Jul 2019 22:43:51 +0200, by ideenmodellierer
-
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_ImprovmentWed, 17 Jul 2019 22:42:15 +0200, by ideenmodellierer
-
Deactivated internal pullups and I2C interrupt callback I2C_ImprovmentWed, 17 Jul 2019 22:41:31 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)Mon, 01 Jul 2019 14:18:39 +0000, by heinrichsweikamp
-
bugfix: implement battery at end in dive header fix-batt-1Thu, 20 Jun 2019 14:24:57 +0200, by Jan Mulder
-
increase RTE to 1.9 and Firmware to 1.4.9 betaSun, 30 Jun 2019 22:12:15 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)Sun, 30 Jun 2019 19:52:46 +0000, by heinrichsweikamp
-
Added start of frame detection for HUD data O2_SensorSyncSun, 30 Jun 2019 21:25:58 +0200, by ideenmodellierer
-
Moved indication variable for received HUD data to tCCR file. O2_SensorSyncSun, 30 Jun 2019 21:18:05 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-version (pull request #27)Wed, 19 Jun 2019 13:12:25 +0000, by heinrichsweikamp
-
bugfix: correct packed main version number in dive header fix-versionWed, 19 Jun 2019 14:31:50 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)Wed, 19 Jun 2019 13:12:01 +0000, by heinrichsweikamp
-
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:33 +0200, by ideenmodellierer
-
Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:19 +0200, by ideenmodellierer
-
Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:46:56 +0200, by ideenmodellierer
-
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.Sat, 01 Jun 2019 10:12:15 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)Fri, 31 May 2019 06:22:50 +0000, by heinrichsweikamp
-
bugfix: make stopwatch and divetime run in sync cleanup-4Wed, 29 May 2019 14:02:27 +0200, by Jan Mulder
-
cleanup: factor out SHelper typedef (and more) cleanup-4Fri, 24 May 2019 09:29:29 +0200, by Jan Mulder
-
bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4Tue, 21 May 2019 11:11:05 +0200, by Jan Mulder
-
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4Mon, 20 May 2019 13:06:02 +0200, by Jan Mulder
-
bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4Mon, 20 May 2019 12:57:31 +0200, by Jan Mulder
-
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4Mon, 20 May 2019 10:13:44 +0200, by Jan Mulder
-
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4Mon, 20 May 2019 10:05:27 +0200, by Jan Mulder
-
cleanup: remove commented/unused code, make static cleanup-4Fri, 17 May 2019 21:19:04 +0200, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)Fri, 17 May 2019 06:38:56 +0000, by heinrichsweikamp
-
cleanup: remove unused code, make static, remove commented code cleanup-3Thu, 16 May 2019 08:56:15 +0200, by Jan Mulder
-
Possible bugfix: do not use bitwise and (&) cleanup-3Thu, 16 May 2019 08:54:33 +0200, by Jan Mulder
-
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)Mon, 13 May 2019 13:37:34 +0000, by heinrichsweikamp
-
Added tag v1.4.8 release for changeset ba9d99a2e310 div-fixes-6Sun, 12 May 2019 09:45:32 +0200, by Jan Mulder
-
bugfix, consistency: show deco, NDL after 1 minute div-fixes-6Thu, 02 May 2019 10:05:28 +0200, by Jan Mulder
-
cleanup: no useless checks for simulator state div-fixes-6Mon, 29 Apr 2019 19:43:05 +0200, by Jan Mulder
-
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 releaseMon, 06 May 2019 15:45:19 +0200, by heinrichsweikamp
-
Minor: Some Texts fixed, allign RTErequired* values with RTE firmwareMon, 06 May 2019 09:00:58 +0200, by heinrichsweikamp
-
add update files for testing purposesSun, 05 May 2019 11:06:02 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)Thu, 02 May 2019 11:12:25 +0000, by heinrichsweikamp
-
Bugfix: write NDL in logbook correctly ndl-in-logbookThu, 02 May 2019 13:08:17 +0200, by Jan Mulder
-
translate some comments into englishWed, 01 May 2019 14:45:47 +0200, by heinrichsweikamp
-
Fix typos (There are still many...)Wed, 01 May 2019 14:39:46 +0200, by heinrichsweikamp
-
Make RTE show as 1.8.0 beta, add update files for testing purposesMon, 29 Apr 2019 19:25:24 +0200, by heinrichsweikamp
-
add update files for testing purposesSun, 28 Apr 2019 17:57:39 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)Sun, 28 Apr 2019 15:54:46 +0000, by heinrichsweikamp
-
Rework SPI error handling. IPC_Sync_Improvment_3Sun, 28 Apr 2019 10:16:38 +0200, by ideenmodellierer
-
Rework pressure/ temperature data aquisition IPC_Sync_Improvment_3Sun, 28 Apr 2019 10:06:27 +0200, by ideenmodellierer
-
Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_3Sun, 28 Apr 2019 09:54:43 +0200, by ideenmodellierer
-
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 betaSun, 28 Apr 2019 09:41:43 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/write-from-sim (pull request #20)Sun, 28 Apr 2019 07:05:23 +0000, by heinrichsweikamp
-
cleanup: also write gas and setpoint changes in simulator mode write-from-simSat, 27 Apr 2019 09:32:16 +0200, by Jan Mulder
-
feature, debug: make simulator write a logbook entry write-from-simWed, 24 Apr 2019 17:10:51 +0200, by Jan Mulder
-
cleanup: do not pass large struct by value write-from-simTue, 23 Apr 2019 21:03:24 +0200, by Jan Mulder
-
cleanup: make things static where possible. write-from-simTue, 23 Apr 2019 17:41:20 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)Fri, 26 Apr 2019 10:36:11 +0000, by heinrichsweikamp
-
Added batch to copy bins from release folder IPC_Sync_Improvment_2Sun, 14 Apr 2019 14:27:32 +0200, by ideenmodellierer
-
Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_2Sun, 14 Apr 2019 14:22:41 +0200, by ideenmodellierer
-
Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_2Sun, 14 Apr 2019 11:43:29 +0200, by ideenmodellierer
-
Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_2Sun, 14 Apr 2019 11:38:14 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/bm-3 (pull request #19)Tue, 23 Apr 2019 14:21:32 +0000, by heinrichsweikamp
-
Added tag V1.4.7 release for changeset 1b9be6040d82 bm-3Tue, 23 Apr 2019 09:25:18 +0200, by Jan Mulder
-
feature: allow new saturation to be set in lower left corner bm-3Mon, 15 Apr 2019 17:35:47 +0200, by Jan Mulder
-
Buehlmann: trivial performance improvement (NDL) bm-3Fri, 12 Apr 2019 19:05:49 +0200, by Jan Mulder
-
Buehlmann: cleanup, remove global pDecolistBuehlmann bm-3Fri, 12 Apr 2019 14:46:48 +0200, by Jan Mulder
-
Minor: Typo fixed in bootloader screen V1.4.7 releaseSat, 13 Apr 2019 14:36:33 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-2 (pull request #17)Fri, 12 Apr 2019 07:22:14 +0000, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-1 (pull request #16)Thu, 11 Apr 2019 10:26:22 +0000, by heinrichsweikamp
-
feature: replace Relative GF by saturation, computational only bm-1Tue, 09 Apr 2019 15:38:31 +0200, by Jan Mulder
-
add update files for testing purposesWed, 10 Apr 2019 11:04:56 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)Tue, 09 Apr 2019 08:52:44 +0000, by heinrichsweikamp
-
debug: add SPI error counter to compass calibration div-fixes-5Mon, 08 Apr 2019 12:35:59 +0200, by Jan Mulder
-
Comply to datasheet when resetting battery gauge registers div-fixes-5Mon, 08 Apr 2019 12:02:07 +0200, by Jan Mulder
-
cleanup: factor out I2C1_Status() and cleanup type div-fixes-5Mon, 08 Apr 2019 11:18:40 +0200, by Jan Mulder
-
cleanup: factor out dataSendToSlaveStopEval div-fixes-5Mon, 08 Apr 2019 10:35:29 +0200, by Jan Mulder
-
cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-5Mon, 08 Apr 2019 10:16:17 +0200, by Jan Mulder
-
Bugfix: do not show NDL in bigscreen mode when zero div-fixes-5Sat, 06 Apr 2019 20:35:21 +0200, by Jan Mulder
-
Minor: translating some comments and variable names into english, some cleanup in tComm.cSat, 06 Apr 2019 09:41:14 +0200, by heinrichsweikamp
-
add update files for testing purposesSat, 06 Apr 2019 09:11:39 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)Sat, 06 Apr 2019 07:01:21 +0000, by heinrichsweikamp
-
cleanup, bugfix: do not exit simulator on 5h dive time div-fixes-4-1Fri, 05 Apr 2019 09:12:04 +0200, by Jan Mulder
-
Bugfix: make date/time setting work over reboots div-fixes-4-1Wed, 03 Apr 2019 21:11:56 +0200, by Jan Mulder
-
cleanup: do not re-implement a standard function div-fixes-4-1Wed, 03 Apr 2019 14:33:12 +0200, by Jan Mulder
-
cleanup: make return void when never used div-fixes-4-1Wed, 03 Apr 2019 14:16:59 +0200, by Jan Mulder
-
cleanup: fix recent extra compiler warnings div-fixes-4-1Tue, 02 Apr 2019 15:11:42 +0200, by Jan Mulder
-
Bugfix: set battery percentage correctly after RTE update div-fixes-4-1Tue, 02 Apr 2019 14:53:15 +0200, by Jan Mulder
-
add update files for testing purposesTue, 02 Apr 2019 18:18:22 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)Mon, 01 Apr 2019 19:19:04 +0000, by heinrichsweikamp
-
Bugfix, deco: fix 2 (small) problems with calculated ceiling div-fixes-3Sun, 31 Mar 2019 19:35:51 +0200, by Jan Mulder
-
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop div-fixes-3Sun, 31 Mar 2019 15:14:06 +0200, by Jan Mulder
-
Bugfix: correct presentation error in tissues custom view div-fixes-3Fri, 29 Mar 2019 14:00:43 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)Mon, 01 Apr 2019 09:01:09 +0000, by heinrichsweikamp
-
Added schedule point for functions executed once in a second Improve_IPC_SyncSun, 31 Mar 2019 15:49:47 +0200, by ideenmodellierer
-
Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_SyncSun, 31 Mar 2019 15:44:12 +0200, by ideenmodellierer
-
Moved display refresh and button action function from tim callback to main loop Improve_IPC_SyncSun, 31 Mar 2019 15:39:44 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/edit-fix (pull request #11)Thu, 28 Mar 2019 13:05:29 +0000, by heinrichsweikamp
-
Bugfix, trivial: correctly present avg depth in overview custom edit-fixThu, 28 Mar 2019 09:54:29 +0100, by Jan Mulder
-
Bugfix: handle rounding of TTS and future TTS consistently edit-fixThu, 28 Mar 2019 08:26:17 +0100, by Jan Mulder
-
Bugfix, trivial: do not visit 9 on first digit for setpoint edit-fixWed, 27 Mar 2019 15:12:26 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/cv-persistent (pull request #10)Tue, 26 Mar 2019 22:23:26 +0000, by heinrichsweikamp
-
New feature: do not show sensor customviews when no sensors attached cv-persistentTue, 26 Mar 2019 16:02:22 +0100, by Jan Mulder
-
New feature: make selected customviews persistent cv-persistentTue, 26 Mar 2019 13:00:15 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)Sun, 24 Mar 2019 22:09:37 +0000, by heinrichsweikamp
-
Update SPI error display and handling ImprovmentSPISun, 24 Mar 2019 22:57:28 +0100, by ideenmodellierer
-
Moved EvaluateButton into 100ms callback ImprovmentSPISun, 24 Mar 2019 22:51:15 +0100, by ideenmodellierer
-
Deleted duplicated header file (keep the one stored in common) ImprovmentSPISun, 24 Mar 2019 22:48:49 +0100, by ideenmodellierer
-
merge forkSat, 23 Mar 2019 21:32:16 +0100, by Ideenmodellierer
-
Merged heinrichsweikamp/ostc4 into defaultSun, 17 Mar 2019 19:16:59 +0100, by Thorsten
-
Merged Cleanup_Compass_Wireless into defaultSat, 16 Mar 2019 19:58:52 +0000, by Thorsten
-
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)Fri, 22 Mar 2019 08:15:30 +0000, by heinrichsweikamp
-
Bugfix: fix initial CNS data in the logbook header div-fixes-cleaup-2Fri, 22 Mar 2019 08:36:39 +0100, by Jan Mulder
-
cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-2Thu, 21 Mar 2019 15:28:47 +0100, by Jan Mulder
-
cleanup: fix (harmless) use before assign div-fixes-cleaup-2Thu, 21 Mar 2019 11:41:59 +0100, by Jan Mulder
-
Bugfix, minor: color the overview customview correctly div-fixes-cleaup-2Wed, 20 Mar 2019 16:24:10 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)Tue, 19 Mar 2019 15:43:38 +0000, by heinrichsweikamp
-
cleanup: more trivial cleanup (logbook.c/h) div-fixes-cleanup-1Tue, 19 Mar 2019 11:42:00 +0100, by Jan Mulder
-
cleanup: remove unused include file t9.h div-fixes-cleanup-1Sat, 16 Mar 2019 21:02:10 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/avg-temp (pull request #6)Fri, 15 Mar 2019 15:48:53 +0000, by heinrichsweikamp
-
Bugfix: average temperature on arrival from RTE instead of display time avg-tempFri, 15 Mar 2019 15:04:57 +0100, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)Fri, 15 Mar 2019 12:55:58 +0000, by heinrichsweikamp
-
cleanup: forgotten cleanup from 9da7dd50e2ec cleanup-2Fri, 15 Mar 2019 12:53:14 +0100, by Jan Mulder
-
cleanup: remove obsolete code, make static, etc. cleanup-2Fri, 15 Mar 2019 12:39:28 +0100, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)Fri, 15 Mar 2019 08:22:16 +0000, by heinrichsweikamp
-
Cleanup compiler warnings Cleanup_Compass_WirelessThu, 14 Mar 2019 20:44:23 +0100, by ideenmodellierer
-
Cleanup compiler warnings Cleanup_Compass_WirelessThu, 14 Mar 2019 20:44:03 +0100, by ideenmodellierer
-
Resolve fixme comments Cleanup_Compass_WirelessThu, 14 Mar 2019 20:43:47 +0100, by ideenmodellierer
-
Removed not suppoted wireless feature Cleanup_Compass_WirelessWed, 13 Mar 2019 21:51:25 +0100, by ideenmodellierer
-
Removed not used compass code Cleanup_Compass_WirelessWed, 13 Mar 2019 21:49:25 +0100, by ideenmodellierer
-
Starting 'Cleanup_Compass_Wireless' branch Cleanup_Compass_WirelessWed, 13 Mar 2019 20:53:05 +0100, by ideenmodellierer
-
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningfulWed, 13 Mar 2019 20:51:50 +0100, by heinrichsweikamp
-
Merged in janlmulder/ostc4/max-depth (pull request #3)Tue, 12 Mar 2019 15:04:19 +0000, by heinrichsweikamp
-
Bugfix: make max depth move with current depth (part 2) max-depthMon, 11 Mar 2019 19:54:20 +0100, by Jan Mulder
-
Bugfix: make max depth move with current depth (part 1) max-depthMon, 11 Mar 2019 19:48:57 +0100, by Jan Mulder
-
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATSSun, 10 Mar 2019 20:30:42 +0100, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)Sun, 10 Mar 2019 15:39:55 +0000, by heinrichsweikamp
-
Bugfix: highlight the menu underline correctly on selected state cleanup-1Sun, 10 Mar 2019 10:09:58 +0100, by Jan Mulder
-
cleanup: local data and functions can be static (tMenu) cleanup-1Fri, 08 Mar 2019 13:47:52 +0100, by Jan Mulder
-
Minor: Some documentation for new hardwareFri, 08 Mar 2019 10:31:32 +0100, by heinrichsweikamp
-
Merged in janlmulder/ostc4/linux-build (pull request #1)Thu, 07 Mar 2019 14:15:33 +0000, by heinrichsweikamp
-
OSTC4pack_V4: do not hard code output filename for fonts linux-buildThu, 21 Feb 2019 10:29:26 +0100, by Jan Mulder
-
Add missing file for self build pack tools linux-buildThu, 21 Feb 2019 10:01:36 +0100, by Jan Mulder
-
Merge with FlipDisplayThu, 07 Mar 2019 15:06:43 +0100, by heinrichsweikamp
-
Removed special indicator for DMA transfer error FlipDisplaySun, 03 Mar 2019 19:18:51 +0100, by Ideenmodellierer
-
Do hard sync after communication timeout > 1 second FlipDisplaySun, 03 Mar 2019 17:46:50 +0100, by Ideenmodellierer
-
Keep NSS low during SPI transfer only FlipDisplaySun, 03 Mar 2019 17:45:39 +0100, by Ideenmodellierer
-
Added definitions for SPI sequence counter FlipDisplaySun, 03 Mar 2019 12:19:47 +0100, by Ideenmodellierer
-
Moved button evaluation out of interrupt handler FlipDisplaySun, 03 Mar 2019 12:18:44 +0100, by Ideenmodellierer
-
Place CNS and pressure within the screen (avoid clipping) FlipDisplaySat, 02 Mar 2019 17:42:51 +0100, by Ideenmodellierer
-
Use SPI TX callback to synchronize to main CPU FlipDisplaySat, 02 Mar 2019 17:01:06 +0100, by Ideenmodellierer
-
Forward compass data during calibration mode FlipDisplaySat, 02 Mar 2019 16:57:59 +0100, by Ideenmodellierer
-
RTE Version 1.7 needed because of protocoll and baud rate change FlipDisplaySat, 02 Mar 2019 16:56:58 +0100, by Ideenmodellierer
-
Use one global structure for schedule data FlipDisplayThu, 28 Feb 2019 20:05:17 +0100, by Ideenmodellierer
-
Introduced Token for SPI data exchange FlipDisplayThu, 28 Feb 2019 19:38:36 +0100, by Ideenmodellierer
-
Use one global structure for all schedule counters FlipDisplayThu, 28 Feb 2019 19:34:08 +0100, by Ideenmodellierer
-
Only use data if data frame is valid FlipDisplayThu, 28 Feb 2019 19:07:10 +0100, by Ideenmodellierer
-
Increase prescalar => frame takes about 4ms. FlipDisplayThu, 28 Feb 2019 19:03:29 +0100, by Ideenmodellierer
-
Get version from local memory instead from incoming data FlipDisplayThu, 28 Feb 2019 19:02:34 +0100, by Ideenmodellierer
-
Removed no longer supported scooter code FlipDisplaySat, 23 Feb 2019 21:10:51 +0100, by Ideenmodellierer
-
Only copy data if data connection to RTE is valid FlipDisplayTue, 19 Feb 2019 21:48:32 +0100, by Ideenmodellierer
-
Introduces abort of communication in case of a out of sync DMA transfer FlipDisplayTue, 19 Feb 2019 18:20:45 +0100, by Ideenmodellierer
-
Removed cyclic (by timer) send on slave side FlipDisplayTue, 19 Feb 2019 18:16:59 +0100, by Ideenmodellierer
-
Intoduced transfer abort function for data exchange recovery FlipDisplayTue, 19 Feb 2019 18:15:35 +0100, by Ideenmodellierer
-
Add compile switch to disable optimization for specific function FlipDisplayTue, 19 Feb 2019 18:13:18 +0100, by Ideenmodellierer
-
Update of configuration and projectfiles to support new library folder structure FlipDisplaySun, 17 Feb 2019 21:29:38 +0100, by Ideenmodellierer
-
Minor changes to improved code quality and to eliminate warnings FlipDisplaySun, 17 Feb 2019 21:22:13 +0100, by Ideenmodellierer
-
Added function to initialise structures with the actual ambient pressure FlipDisplaySun, 17 Feb 2019 21:14:09 +0100, by Ideenmodellierer
-
Added current STM32 standandard libraries in version independend folder structure FlipDisplaySun, 17 Feb 2019 21:12:22 +0100, by Ideenmodellierer
-
Drop old STM32 standard librarey files FlipDisplaySun, 17 Feb 2019 21:07:35 +0100, by Ideenmodellierer
-
Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplaySun, 27 Jan 2019 22:21:01 +0100, by Ideenmodellierer
-
Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplaySun, 27 Jan 2019 22:17:16 +0100, by Ideenmodellierer
-
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings) FlipDisplaySun, 27 Jan 2019 22:01:07 +0100, by Ideenmodellierer
-
Take care for display orientation if deleting lines FlipDisplaySun, 13 Jan 2019 18:59:53 +0100, by Ideenmodellierer
-
Use 32bit operations for buffer fills FlipDisplaySun, 13 Jan 2019 18:58:23 +0100, by Ideenmodellierer
-
Cleanup warning and disable printf calls FlipDisplayTue, 08 Jan 2019 22:31:17 +0100, by Ideenmodellierer
-
Enlarge text limits to get string displayed completly FlipDisplaySun, 06 Jan 2019 22:31:45 +0100, by Ideenmodellierer
-
Added small helper for runtime evaluation FlipDisplaySun, 06 Jan 2019 22:27:46 +0100, by Ideenmodellierer
-
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e FlipDisplayThu, 03 Jan 2019 19:59:36 +0100, by Ideenmodellierer
-
Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplayTue, 01 Jan 2019 21:03:33 +0100, by Ideenmodellierer
-
Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplayTue, 01 Jan 2019 21:03:10 +0100, by Ideenmodellierer
-
Added option to handled mirrored display to existing functions FlipDisplayTue, 01 Jan 2019 21:02:17 +0100, by Ideenmodellierer
-
Consider computer heading in case of a flipped display FlipDisplayTue, 01 Jan 2019 21:00:55 +0100, by Ideenmodellierer
-
hPa instead of mbar, enabled Spanish language kittzTue, 27 Nov 2018 18:31:21 +0100, by heinrichsweikamp
-
reduce i2c speed and dutycycle for compass stability kittzMon, 26 Nov 2018 12:20:31 +0300, by Dmitry Romanov
-
Stable to test. button sensitiveness fix. + global_constants. kittzMon, 26 Nov 2018 10:50:39 +0300, by Dmitry Romanov
-
First stable. With minimal button sensitivity fix(for broken buttons) kittzMon, 26 Nov 2018 10:13:02 +0300, by Dmitry Romanov
-
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ kittzWed, 21 Nov 2018 12:49:54 +0300, by Dmitry Romanov
-
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!! kittzWed, 21 Nov 2018 10:25:15 +0300, by Dmitry Romanov
-
Added Spanish languageSat, 06 Oct 2018 15:02:11 +0200, by heinrichsweikamp
-
Added Fontpack reference projectThu, 04 Oct 2018 20:49:47 +0200, by Ideenmodellierer
-
Added script to pack FontPackThu, 04 Oct 2018 20:45:12 +0200, by Ideenmodellierer
-
Starting Firmware 1.4 the fontpack version 1.0 is neededThu, 04 Oct 2018 20:44:19 +0200, by Ideenmodellierer
-
Update Fontpack code to support font moved to upper memoryThu, 04 Oct 2018 20:42:56 +0200, by Ideenmodellierer
-
Update version infoThu, 04 Oct 2018 20:41:21 +0200, by Ideenmodellierer
-
Move font to upper memoryThu, 04 Oct 2018 20:40:53 +0200, by Ideenmodellierer
-
Add definitions for Fonts to be placed in upper flashThu, 04 Oct 2018 20:40:21 +0200, by Ideenmodellierer
-
MergeTue, 11 Sep 2018 22:16:05 +0200, by heinrichsweikamp
-
remove wiki files from repoWed, 05 Sep 2018 10:41:48 +0200, by heinrichsweikamp
-
old (and new) compass supportTue, 11 Sep 2018 19:29:58 +0200, by heinrichsweikamp
-
1.3.8 forum releaseThu, 30 Aug 2018 21:48:21 +0200, by heinrichsweikamp
-
Update image size for 'F'ahrenheitWed, 22 Aug 2018 18:54:01 +0200, by Ideenmodellierer
-
Bugfix: FutureTTS and Fahrenheit not displayed correctWed, 22 Aug 2018 11:35:05 +0200, by Ideenmodellierer
-
language updatesWed, 15 Aug 2018 12:16:23 +0200, by heinrichsweikamp
-
language updatesTue, 14 Aug 2018 13:53:43 +0200, by heinrichsweikamp
-
typo in info menu...Tue, 14 Aug 2018 12:43:58 +0200, by heinrichsweikamp
-
Replaced wait loop with delay fctMon, 13 Aug 2018 19:11:14 +0200, by Ideenmodellierer
-
Bugfix font elements (ue missing)Sun, 12 Aug 2018 23:02:13 +0200, by Ideenmodellierer
-
rename update batch fileSat, 11 Aug 2018 13:57:47 +0200, by heinrichsweikamp
-
more language updatesFri, 10 Aug 2018 19:40:55 +0200, by heinrichsweikamp
-
language updatesFri, 10 Aug 2018 19:22:12 +0200, by heinrichsweikamp
-
Added UTF8 decode functionThu, 09 Aug 2018 22:39:15 +0200, by Ideenmodellierer
-
Resolve format warningsThu, 09 Aug 2018 22:38:56 +0200, by Ideenmodellierer
-
language updatesTue, 07 Aug 2018 17:03:36 +0200, by heinrichsweikamp
-
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...Tue, 07 Aug 2018 00:24:05 +0200, by heinrichsweikamp
-
Added missing ENTRY pointSun, 05 Aug 2018 12:57:49 +0200, by Ideenmodellierer
-
Allow RTE binaries > 64k sizeSun, 05 Aug 2018 12:57:23 +0200, by Ideenmodellierer