ostc4: revision graph

graph

less more | rev 926: (0) -128 tip

Bugfix sensor de-/activation handling: Evo_2_23 tip
Thu, 14 Nov 2024 20:13:18 +0100, by Ideenmodellierer
Bugfix scrubber time: Evo_2_23
Wed, 13 Nov 2024 17:56:02 +0100, by Ideenmodellierer
Bugfix real scrubber time decreased in sim mode: Evo_2_23
Wed, 13 Nov 2024 17:55:05 +0100, by Ideenmodellierer
UART6 DMA handling: Evo_2_23
Mon, 04 Nov 2024 20:21:02 +0100, by Ideenmodellierer
Moved UART6 into a separate unit: Evo_2_23
Sun, 03 Nov 2024 20:53:05 +0100, by Ideenmodellierer
Improved mix mode ADC conversion: Evo_2_23
Sun, 03 Nov 2024 18:19:51 +0100, by Ideenmodellierer
Added view for position data: Evo_2_23
Sun, 03 Nov 2024 15:44:54 +0100, by Ideenmodellierer
GNSS support for external UART interface: Evo_2_23
Sun, 03 Nov 2024 15:43:04 +0100, by Ideenmodellierer
Switch external interface tx communication to DMA: Evo_2_23
Sun, 03 Nov 2024 15:40:55 +0100, by Ideenmodellierer
Bugfix external interface power up after sleep: Evo_2_23
Sun, 03 Nov 2024 15:37:00 +0100, by Ideenmodellierer
External sensor UART: Switch to DMA TX transfers: Evo_2_23
Mon, 28 Oct 2024 20:34:58 +0100, by Ideenmodellierer
SlowExitTimer: Evo_2_23
Sat, 19 Oct 2024 20:10:56 +0200, by Ideenmodellierer
Devbugfix SlowExit depth: Evo_2_23
Sat, 19 Oct 2024 20:06:55 +0200, by Ideenmodellierer
Adapted limit for better gas warning: Evo_2_23
Tue, 15 Oct 2024 21:10:45 +0200, by Ideenmodellierer
Ascent speed visualization: Evo_2_23
Tue, 15 Oct 2024 21:07:07 +0200, by Ideenmodellierer
VPMTable deco stop visualization: Evo_2_23
Tue, 15 Oct 2024 20:00:37 +0200, by Ideenmodellierer
Devbugfix Sample time resolution for longer dives: Evo_2_23
Tue, 15 Oct 2024 19:12:05 +0200, by Ideenmodellierer
Define state of new GPIO out pins: Evo_2_23
Tue, 15 Oct 2024 19:07:19 +0200, by Ideenmodellierer
Deactivated GNSS per default Evo_2_23
Sun, 13 Oct 2024 18:13:56 +0200, by ideenmodellierer
Adaptation custom view deco plan for VPM: Evo_2_23
Sun, 13 Oct 2024 18:13:35 +0200, by ideenmodellierer
Bugfix de-/activation of deco stop consideration in simulator: Evo_2_23
Sun, 13 Oct 2024 18:07:23 +0200, by ideenmodellierer
DevBugfix SlowExit edit display: Evo_2_23
Sun, 13 Oct 2024 17:38:16 +0200, by ideenmodellierer
Ascent speed display: Evo_2_23
Sun, 13 Oct 2024 17:36:32 +0200, by ideenmodellierer
Disable GNSS operations using compile switch: Evo_2_23
Thu, 03 Oct 2024 20:25:49 +0200, by Ideenmodellierer
VPM table mode: Evo_2_23
Wed, 02 Oct 2024 22:18:19 +0200, by Ideenmodellierer
Bugfix simulator/planer: Evo_2_23
Wed, 02 Oct 2024 22:07:13 +0200, by Ideenmodellierer
minor: LED/Vibration behavior on wake-up Evo_2_23
Tue, 01 Oct 2024 14:18:21 +0200, by heinrichsweikamp
Added data path and visualization for position data: Evo_2_23
Mon, 30 Sep 2024 21:56:05 +0200, by Ideenmodellierer
Disabled debug features Evo_2_23
Thu, 26 Sep 2024 18:40:41 +0200, by ideenmodellierer
Use dive profile as source for simulator: Evo_2_23
Thu, 26 Sep 2024 18:36:05 +0200, by ideenmodellierer
Development Feature Runtime in Debugview: Evo_2_23
Thu, 26 Sep 2024 18:32:36 +0200, by ideenmodellierer
Zusammenf?hren Evo_2_23
Wed, 18 Sep 2024 14:31:06 +0200, by heinrichsweikamp
GNSS UART DMA test Evo_2_23
Wed, 18 Sep 2024 14:30:45 +0200, by heinrichsweikamp
Reenabled fast communication: Evo_2_23
Wed, 11 Sep 2024 22:32:05 +0200, by Ideenmodellierer
Smal modification slow exit counter: Evo_2_23
Tue, 10 Sep 2024 21:18:36 +0200, by ideenmodellierer
Added hysteresis for ascent speed coloring: Evo_2_23
Tue, 10 Sep 2024 21:16:32 +0200, by ideenmodellierer
cleanup and disable function for GNSS uart and DMA Evo_2_23
Fri, 06 Sep 2024 18:43:30 +0200, by heinrichsweikamp
GNSS work in progress Evo_2_23
Fri, 06 Sep 2024 16:46:22 +0200, by heinrichsweikamp
Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_23
Tue, 03 Sep 2024 20:46:42 +0200, by Ideenmodellierer
adding GNSS code Evo_2_23
Tue, 03 Sep 2024 15:30:53 +0200, by heinrichsweikamp
Improve communication stability: Evo_2_23
Sun, 01 Sep 2024 21:38:06 +0200, by Ideenmodellierer
Replaced global hardwareDisplay with unit access: Evo_2_23
Sun, 01 Sep 2024 21:35:50 +0200, by Ideenmodellierer
Minor screen cleanup: Evo_2_23
Sun, 01 Sep 2024 20:31:01 +0200, by Ideenmodellierer
Added compile switch for predive check menu: Evo_2_23
Sat, 31 Aug 2024 18:14:40 +0200, by Ideenmodellierer
Added slow exit timer function: Evo_2_23
Sat, 31 Aug 2024 17:35:52 +0200, by Ideenmodellierer
Added filtering of ascent speed: Evo_2_23
Sat, 31 Aug 2024 17:28:37 +0200, by Ideenmodellierer
support for led and vibration Evo_2_23
Thu, 29 Aug 2024 15:01:30 +0200, by heinrichsweikamp
new bluetooth work, bootloader work Evo_2_23
Thu, 29 Aug 2024 12:03:10 +0200, by heinrichsweikamp
brightness settings and proper power down for new screen Evo_2_23
Sun, 25 Aug 2024 18:55:43 +0200, by heinrichsweikamp
DevBugfix: Exit condition deco_stop_depth Evo_2_23
Tue, 20 Aug 2024 15:18:43 +0200, by Ideenmodellierer
Minor: Enable CO2-Sensor as default now Evo_2_23
Fri, 16 Aug 2024 16:17:51 +0200, by heinrichsweikamp
DevBugfix: Added missing default language value Evo_2_23
Thu, 15 Aug 2024 20:44:35 +0200, by Ideenmodellierer
minor Evo_2_23
Wed, 14 Aug 2024 16:50:55 +0200, by heinrichsweikamp
merge new screen stuff Evo_2_23
Wed, 14 Aug 2024 16:44:46 +0200, by heinrichsweikamp
Added first time initialization for new bluetooth module: Evo_2_23
Wed, 14 Aug 2024 14:41:04 +0200, by Ideenmodellierer
support for new screen default
Tue, 13 Aug 2024 13:24:54 +0200, by heinrichsweikamp
Instrument code for Bootloader: Evo_2_23
Mon, 12 Aug 2024 22:25:46 +0200, by Ideenmodellierer
Reactivate Bootloader: Evo_2_23
Mon, 12 Aug 2024 22:23:03 +0200, by Ideenmodellierer
Introduce speed dependend coloring of depth: Evo_2_23
Mon, 12 Aug 2024 15:14:19 +0200, by Ideenmodellierer
Decrease calculation interval for ascend speed: Evo_2_23
Mon, 12 Aug 2024 14:30:22 +0200, by Ideenmodellierer
Zusammenf?hren
Mon, 22 Jul 2024 16:40:14 +0200, by heinrichsweikamp
When opening the logbook, or scrolling inside a logbook page,
Mon, 22 Jul 2024 16:39:48 +0200, by heinrichsweikamp
Fix incorrect logging of bailout to Open Circuit when using the best gas.
Mon, 22 Jul 2024 16:38:36 +0200, by heinrichsweikamp
Bugfix empty line in deco plan (VPM only): Evo_2_23
Tue, 02 Jul 2024 20:05:08 +0200, by Ideenmodellierer
Only use deco gas for calculation if option is enabled: Evo_2_23
Tue, 02 Jul 2024 19:24:03 +0200, by Ideenmodellierer
Synchronize ADC and UART activities: Evo_2_23
Tue, 07 May 2024 21:25:25 +0200, by Ideenmodellierer
Code cleanup Evo_2_23
Tue, 07 May 2024 21:20:56 +0200, by Ideenmodellierer
Improvment battery charger visualization: Evo_2_23
Tue, 07 May 2024 21:20:33 +0200, by Ideenmodellierer
Bugfix initialisation of surface pressure: Evo_2_23
Tue, 07 May 2024 21:12:37 +0200, by Ideenmodellierer
Developer feature debug warning: Evo_2_23
Sun, 05 May 2024 17:27:28 +0200, by Ideenmodellierer
Do not show SP tab if PSCR mode is active: Evo_2_23
Sun, 05 May 2024 17:20:56 +0200, by Ideenmodellierer
Redefine Deco gas creation function: Evo_2_23
Mon, 18 Mar 2024 21:52:25 +0100, by Ideenmodellierer
Development bugfix menu id handling: Evo_2_23
Sat, 09 Mar 2024 20:05:33 +0100, by Ideenmodellierer
Potential Bugfix Selection MenuEdit lifecycle: Evo_2_23
Thu, 07 Mar 2024 21:51:18 +0100, by Ideenmodellierer
Bugfix Selection of custom views: Evo_2_23
Thu, 07 Mar 2024 21:46:49 +0100, by Ideenmodellierer
Added line checks for System Menu: Evo_2_23
Thu, 07 Mar 2024 21:42:23 +0100, by Ideenmodellierer
Check line enable/disable state when a new page is selected: Evo_2_23
Fri, 01 Mar 2024 19:30:29 +0100, by Ideenmodellierer
Consider flipped screen for Predive menu: Evo_2_23
Thu, 29 Feb 2024 18:49:55 +0100, by Ideenmodellierer
Bugfix tInfo_write_content_simple flip: Evo_2_23
Thu, 15 Feb 2024 21:26:28 +0100, by Ideenmodellierer
Minor: Remove absolute paths from the reference project files
Tue, 13 Feb 2024 17:30:24 +0100, by heinrichsweikamp
Consider pressure offset compensation in case of setting a default value: Evo_2_23
Sun, 21 Jan 2024 22:26:37 +0100, by Ideenmodellierer
Added new PreDiveCheck info page: Evo_2_23
Sun, 21 Jan 2024 22:24:36 +0100, by Ideenmodellierer
Added option to adjust pressure to diveO2 reference: Evo_2_23
Sun, 21 Jan 2024 22:18:51 +0100, by Ideenmodellierer
Update version number and set beta state Evo_2_23
Sat, 20 Jan 2024 19:38:52 +0100, by Ideenmodellierer
Migrated Sentinel protocol to new UART structure: Evo_2_23
Mon, 15 Jan 2024 21:44:18 +0100, by Ideenmodellierer
Added autofocus for T3_DecoTTS view: Evo_2_23
Sun, 07 Jan 2024 21:25:34 +0100, by Ideenmodellierer
Development bugfix CO2 LLC: Evo_2_23
Sun, 07 Jan 2024 21:21:58 +0100, by Ideenmodellierer
Code cleanup: UART protocol definitions Evo_2_23
Sun, 07 Jan 2024 21:20:15 +0100, by Ideenmodellierer
Added T3 autofocus for Gas list: Evo_2_23
Fri, 05 Jan 2024 16:01:22 +0100, by Ideenmodellierer
Bugfixes and code cleanup for BF views: Evo_2_23
Wed, 27 Dec 2023 19:37:17 +0100, by ideenmodellierer
Bugfix BF temperatur display and cv switching: Evo_2_23
Wed, 27 Dec 2023 19:24:44 +0100, by ideenmodellierer
Added autofocus for BF Navigation view: Evo_2_23
Sun, 17 Dec 2023 21:49:02 +0100, by Ideenmodellierer
Added event based display changes for big font view: Evo_2_23
Sun, 17 Dec 2023 21:14:17 +0100, by Ideenmodellierer
Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Sun, 17 Dec 2023 21:10:04 +0100, by Ideenmodellierer
Added selection if an active gas shall be used for deco calculation or not Evo_2_23
Thu, 16 Nov 2023 20:37:20 +0100, by Ideenmodellierer
Activated work gas for (p)scr mode: Evo_2_23
Thu, 16 Nov 2023 20:36:35 +0100, by Ideenmodellierer
Added selection if an active gas shall be used for deco calculation or not: Evo_2_23
Thu, 16 Nov 2023 20:32:09 +0100, by Ideenmodellierer
Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_23
Thu, 16 Nov 2023 20:25:01 +0100, by Ideenmodellierer
Added CO2 display to T3 Bigfont view: Evo_2_23
Sun, 05 Nov 2023 20:21:42 +0100, by Ideenmodellierer
Moved CO2 Menu from Xtra to Hardware: Evo_2_23
Sun, 05 Nov 2023 20:19:08 +0100, by Ideenmodellierer
Bugfix Line order of info screen with flip screen active: Evo_2_23
Wed, 11 Oct 2023 17:49:19 +0200, by Ideenmodellierer
Bugfix Flipscreen visualization:
Mon, 09 Oct 2023 16:50:11 +0200, by Ideenmodellierer
Bugfix Flipscreen visualization: Evo_2_23
Mon, 09 Oct 2023 16:50:11 +0200, by Ideenmodellierer
Starting 'Evo_2_23' branch Evo_2_23
Mon, 09 Oct 2023 15:10:10 +0200, by Ideenmodellierer
User Test
Mon, 09 Oct 2023 11:23:27 +0200, by heinrichsweikamp
1.6.5 release
Mon, 25 Sep 2023 10:56:32 +0200, by heinrichsweikamp
Split definition of custom views:
Sun, 24 Sep 2023 18:43:12 +0200, by Ideenmodellierer
Added debug information in case an error in the settings has been detected:
Sun, 24 Sep 2023 18:39:26 +0200, by Ideenmodellierer
1.6.4 release
Thu, 14 Sep 2023 13:24:30 +0200, by heinrichsweikamp
Testing build
Tue, 12 Sep 2023 12:02:49 +0200, by heinrichsweikamp
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
Sun, 10 Sep 2023 11:46:45 +0200, by heinrichsweikamp
Bugfix CustomView selection during dive mode:
Sun, 03 Sep 2023 18:03:49 +0200, by Ideenmodellierer
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
Sun, 03 Sep 2023 17:58:12 +0200, by Ideenmodellierer
Used real sensor state in simulation:
Sun, 03 Sep 2023 17:53:07 +0200, by Ideenmodellierer
Testing build
Thu, 31 Aug 2023 10:33:25 +0200, by heinrichsweikamp
Added function to skip lines which are not needed for operation:
Sun, 27 Aug 2023 20:59:12 +0200, by Ideenmodellierer
Only jump to Sensor view during charging if sensors are connected:
Sun, 27 Aug 2023 20:55:57 +0200, by Ideenmodellierer
DevBugfix CO2 sensor in streaming mode:
Sun, 27 Aug 2023 20:51:13 +0200, by Ideenmodellierer
Testing build
Sat, 26 Aug 2023 13:38:13 +0200, by heinrichsweikamp
Zusammenf?hren
Sat, 26 Aug 2023 13:37:06 +0200, by heinrichsweikamp
Update Firmware version number
Sat, 26 Aug 2023 13:35:15 +0200, by heinrichsweikamp
Adds a simple countdown timer, available as a custom view in surface and dive mode.
Mon, 21 Aug 2023 17:20:07 +0200, by heinrichsweikamp
Cleanup initialisation code:
Thu, 10 Aug 2023 21:35:34 +0200, by Ideenmodellierer
Cleanup initialisation / deinitialization:
Thu, 10 Aug 2023 21:30:24 +0200, by Ideenmodellierer
Removed dependency to protocol setting:
Thu, 10 Aug 2023 21:27:58 +0200, by Ideenmodellierer
Update RTE version number
Thu, 10 Aug 2023 21:24:04 +0200, by Ideenmodellierer
Cleanup warnings
Tue, 08 Aug 2023 17:29:03 +0200, by Ideenmodellierer
Added CO2 mirrow instance:
Mon, 07 Aug 2023 20:32:42 +0200, by Ideenmodellierer

less more | rev 926: (0) -128 tip

Mercurial > public > ostc4

graph