ostc4: revision graph

graph

less more | rev 584: (0) -240 +240 tip

Added option for 100% o2 calibration:
2020-12-12, by Ideenmodellierer
Solved minor warnings
2020-12-12, by Ideenmodellierer
Show Fallback if no valid sensor value is available:
2020-12-12, by Ideenmodellierer
Added ex Interface measurement restart in case of i2c disturbance:
2020-12-12, by Ideenmodellierer
Bugfix bad resolution of compass LSM303AGR:
2020-12-12, by Ideenmodellierer
Minor: Functional inert cleanup of some unused variables
2020-12-03, by heinrichsweikamp
Rework pitch detection:
2020-11-29, by Ideenmodellierer
Handle o2 voltage values < 0.5mV as invalid:
2020-11-29, by Ideenmodellierer
Return to o2 values:
2020-11-29, by Ideenmodellierer
Change style of viewport calibration menu:
2020-11-29, by Ideenmodellierer
Improved focus detection:
2020-11-25, by Ideenmodellierer
Update String "Blickwinkel":
2020-11-25, by Ideenmodellierer
Added debug view to viewport calibration:
2020-11-25, by Ideenmodellierer
Reactivate compass parameter stored in NVM:
2020-11-25, by Ideenmodellierer
Try to reduce legth of log entry string:
2020-11-30, by Ideenmodellierer
Added new section "lower.font":
2020-11-30, by Ideenmodellierer
Minor: Update the documentation for building the code
2020-11-29, by heinrichsweikamp
-Add 12HR Time Support
2020-11-24, by izzni
add current build
2020-11-21, by heinrichsweikamp
Bugfix center / right alignment if dualfont is used:
2020-11-15, by Ideenmodellierer
Bugfix One or more deactivated sensors hide sensor display:
2020-11-15, by Ideenmodellierer
Refine o2 sensor diagnostic functions:
2020-11-15, by Ideenmodellierer
Added ADC sensor interface to O2 sensore menu structure:
2020-11-15, by Ideenmodellierer
Solved minor warnings
2020-11-15, by Ideenmodellierer
Added O2 sensor source and calibration parameters to setting structure
2020-11-15, by Ideenmodellierer
Check if HW evaluation was performed:
2020-11-15, by Ideenmodellierer
Changed operation mode of RecoverSampleIndex:
2020-11-12, by Ideenmodellierer
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
2020-11-12, by Ideenmodellierer
Switch source of o2 sensor data depending on availability of external ADC:
2020-11-12, by Ideenmodellierer
Added HW_Info to Discovery <=> RTE data exchange:
2020-11-12, by Ideenmodellierer
Added external ADC interface functionality (MCP3424):
2020-11-12, by Ideenmodellierer
Added color indicator for focus state:
2020-11-08, by Ideenmodellierer
Added menu structure to acces viewport calibration:
2020-11-08, by Ideenmodellierer
Added viewport functionality:
2020-11-08, by Ideenmodellierer
Make sure motion detection settings are set to default values:
2020-11-08, by Ideenmodellierer
Only execute motion detection functions if features is enabled:
2020-11-08, by Ideenmodellierer
Update roll and pitch value in simulation mode:
2020-11-08, by Ideenmodellierer
Added viewport calibration to dive menu:
2020-11-02, by Ideenmodellierer
Added new settings for Viewport:
2020-11-02, by Ideenmodellierer
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
2020-11-03, by heinrichsweikamp
add current build
2020-11-02, by heinrichsweikamp
Shortend t3 view names:
2020-10-11, by Ideenmodellierer
Added new t3 view showing first deco stop and tts in parallel:
2020-10-10, by Ideenmodellierer
Added default view selection and auto return to view to t3 visualization:
2020-10-10, by Ideenmodellierer
Bugfix return from submenu in t3 view:
2020-10-10, by Ideenmodellierer
Added inertia simulation for compass heading:
2020-10-10, by Ideenmodellierer
BugFix firmware downgrade to version with less settings:
2020-10-10, by Ideenmodellierer
Added center / right alignment option to custom text display:
2020-10-07, by Ideenmodellierer
Changed visualization of Depth / temperatur / debugview entry
2020-10-07, by Ideenmodellierer
Increased max value for surface pressure:
2020-10-07, by Ideenmodellierer
Added tag 1.5.5 release for changeset 02e7e11fdbe8
2020-10-04, by heinrichsweikamp
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
2020-09-25, by heinrichsweikamp
add current build
2020-09-16, by heinrichsweikamp
Bugfix custom view selection dialog:
2020-09-15, by Ideenmodellierer
Bugfix: No need to consider surface custom view in count of enabled view:
2020-09-15, by Ideenmodellierer
Added skip condition in custom view selection:
2020-09-15, by Ideenmodellierer
Added new option to gas configuration: "Off":
2020-09-13, by Ideenmodellierer
Do not show gases in "Off" state in custom gas list:
2020-09-13, by Ideenmodellierer
Added new option to gas configuration: "Off":
2020-09-13, by Ideenmodellierer
Change color ID used in strings for light grey:
2020-09-13, by Ideenmodellierer
Minor: Removed duplicated definition of number of available gases
2020-09-13, by Ideenmodellierer
Changed string for data view selections:
2020-09-10, by Ideenmodellierer
Added compile switch for motion control:
2020-09-10, by Ideenmodellierer
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
2020-09-10, by Ideenmodellierer
Moved custom view menu to new tab:
2020-09-08, by Ideenmodellierer
Reset Safety Stop display in case of a new descend:
2020-09-06, by Ideenmodellierer
Added T3_gaslist:
2020-09-06, by Ideenmodellierer
Added color coding for cv gas list:
2020-09-06, by Ideenmodellierer
Added quick menu function to big font view:
2020-09-06, by Ideenmodellierer
Added missing display of button labels in refresh function:
2020-09-06, by Ideenmodellierer
Properly send compass 3 into sleepmode (end-2019 hardware)
2020-09-16, by heinrichsweikamp
Merge
2020-08-31, by heinrichsweikamp
Added new strings for the selection of T3 custom views
2020-08-30, by Ideenmodellierer
Minor adaptions in page layout:
2020-08-30, by Ideenmodellierer
Display warning in t7 using centered strings
2020-08-30, by Ideenmodellierer
Show page number in small letters if more than 8 tabs are active
2020-08-30, by Ideenmodellierer
Reimplementation of tMenuEdit_select:
2020-08-30, by Ideenmodellierer
Added new menu tab into call structure
2020-08-30, by Ideenmodellierer
Added new top level menu for customization of views
2020-08-30, by Ideenmodellierer
Removed second big font profile
2020-08-30, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
2020-08-24, by Ideenmodellierer
Bugfix display of disabled screen.
2020-08-24, by Ideenmodellierer
Bugfix display of disabled screen.
2020-08-24, by Ideenmodellierer
Bugfix right alignment of dualfont strings
2020-08-24, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-24, by Ideenmodellierer
Added compile switch to enable / disable new BigFont layout
2020-08-24, by Ideenmodellierer
Added dew parameter to enable selection of customer BigFont screens to be displayed
2020-08-24, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
2020-08-24, by Ideenmodellierer
Bugfix display of disabled screen.
2020-08-24, by Ideenmodellierer
Bugfix display of disabled screen.
2020-08-24, by Ideenmodellierer
Bugfix right alignment of dualfont strings
2020-08-24, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-24, by Ideenmodellierer
Added compiler switch for existing debug view parameter
2020-08-20, by Ideenmodellierer
Added tag v1.5.4 release for changeset e9ca66ce36e5
2020-08-10, by heinrichsweikamp
1.5.4 release v1.5.4 release
2020-07-22, by heinrichsweikamp
add wiki sub-directory
2020-06-29, by heinrichsweikamp
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
2020-06-27, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
2020-05-26, by heinrichsweikamp
Bugfix header EEPROM layout: FixLayout_Header_LogView
2020-05-26, by ideenmodellierer
Bugfix right alignment of string: FixLayout_Header_LogView
2020-05-26, by ideenmodellierer
Small corrections layout Divelog page 1: FixLayout_Header_LogView
2020-05-26, by ideenmodellierer
Development option only read bottledata: FixLayout_Header_LogView
2020-05-26, by ideenmodellierer
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
2020-05-19, by heinrichsweikamp
Bugfix calculation of string center position: Improve_Button_Sleep
2020-05-18, by ideenmodellierer
Code cleanup pressure plausibility check: Improve_Button_Sleep
2020-05-13, by ideenmodellierer
Bugfix unintended else condition: Improve_Button_Sleep
2020-05-13, by ideenmodellierer
Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Changed default values: Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep
2020-05-12, by ideenmodellierer
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
2020-04-28, by heinrichsweikamp
bugfix: implement battery charge percentage in dive header fix-bat-2
2020-04-22, by Jan Mulder
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
2020-04-15, by heinrichsweikamp
Removed no longer needed reset profile function: Improve_Logtansfer
2020-04-14, by ideenmodellierer
Moved and deactivated analyse sample buffer switch: Improve_Logtansfer
2020-04-14, by ideenmodellierer
Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer
2020-04-14, by ideenmodellierer
Removed invalidate header function because it is no lonnger needed Improve_Logtansfer
2020-04-14, by ideenmodellierer
Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer
2020-04-14, by ideenmodellierer
Added compile switch to handle additional data during raw header request: Improve_Logtansfer
2020-04-13, by ideenmodellierer
Added function to transfer sample buffer: Improve_Logtansfer
2020-04-12, by ideenmodellierer
Power-down Bluetooth on COMM exit
2020-04-08, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
2020-03-30, by heinrichsweikamp
merged default into minor_improvments minor_improvments
2020-03-29, by Ideenmodellierer
Activated reset of sample information within header data at time of sector erasing: minor_improvments
2020-03-29, by ideenmodellierer
Added ppO2 to dummy profile data: minor_improvments
2020-03-28, by ideenmodellierer
Eliminated some minor warnings minor_improvments
2020-03-24, by ideenmodellierer
Transfer a dummy profile in case of missing sample information: minor_improvments
2020-03-24, by ideenmodellierer
Reactivated samples for bottle pressure information: minor_improvments
2020-03-24, by ideenmodellierer
Reactivated samples for bottle pressure information: minor_improvments
2020-03-24, by ideenmodellierer
Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24, by ideenmodellierer
Added compile variant enabling the reset of profile sample information: minor_improvments
2020-03-24, by ideenmodellierer
Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments
2020-03-24, by ideenmodellierer
Added new compile switches for variants: minor_improvments
2020-03-24, by ideenmodellierer
Added initialization of bottle sensor data age counter minor_improvments
2020-03-23, by ideenmodellierer
Added compile switch to show voltage parallel to charge status percantage minor_improvments
2020-03-23, by ideenmodellierer
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments
2020-03-23, by ideenmodellierer
Introduced configuration header for variant managment: minor_improvments
2020-03-05, by ideenmodellierer
Removed duplicated definition: minor_improvments
2020-03-05, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
2020-02-29, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
2020-02-29, by ideenmodellierer
Introduced enum for lower left corner view selection: minor_improvments
2020-02-29, by ideenmodellierer
fix potential issue with >255 dives in the logbook
2020-03-01, by heinrichsweikamp
Added tag v1.5.3 release for changeset 5b4c78c36b04
2020-02-27, by heinrichsweikamp
1.5.3 release v1.5.3 release
2020-02-27, by heinrichsweikamp
update the 1.5.3 for tests
2020-02-24, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
2020-02-24, by heinrichsweikamp
Moved power on detection to RTE: Improve_BatteryGasGauge
2020-02-23, by ideenmodellierer
Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge
2020-02-23, by ideenmodellierer
Reduced timeout for common UART communication: Improve_BatteryGasGauge
2020-02-23, by ideenmodellierer
Detect startup after power off: Improve_BatteryGasGauge
2020-02-23, by ideenmodellierer
show battery percent and voltage and surfacemode. That gives additional
2020-02-18, by heinrichsweikamp
make a 1.5.3 for tests
2020-02-18, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
2020-02-18, by heinrichsweikamp
Marked possible code improvment for future activities: ImprovmentNVM_2
2020-02-17, by ideenmodellierer
Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-17, by ideenmodellierer
Activated ringbuffer for settings: ImprovmentNVM_2
2020-02-16, by ideenmodellierer
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15, by ideenmodellierer
Added function to analyse the sampel ringbuffer: ImprovmentNVM_2
2020-02-15, by ideenmodellierer
Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_2
2020-02-15, by ideenmodellierer
ext_Flash_write_sample erase sector optimization: ImprovmentNVM_2
2020-02-10, by ideenmodellierer
Moved Timeout handling out of 100ms callback: ImprovmentNVM_2
2020-02-10, by ideenmodellierer
Enable sequentionel writing of device data: ImprovmentNVM_2
2020-02-10, by ideenmodellierer
Optimize ef_write_block function: ImprovmentNVM_2
2020-02-10, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
2020-02-10, by heinrichsweikamp
Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
2020-02-07, by Jan Mulder
1.5.2 beta with RTE 2.02 v1.5.2.beta release
2020-01-15, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
2020-01-15, by heinrichsweikamp
merged default into Improvment_NVM Improment_NVM
2020-01-14, by Ideenmodellierer
Added compile switch for restoring of last known date after power lost: Improment_NVM
2020-01-14, by ideenmodellierer
Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
2020-01-14, by ideenmodellierer
Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
2020-01-14, by ideenmodellierer
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
2020-01-13, by ideenmodellierer
Bugfix display compass calibration frozen: Improment_NVM
2020-01-12, by ideenmodellierer
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
2020-01-12, by ideenmodellierer
Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
2020-01-12, by ideenmodellierer
Bugfix parallel call of external flash functions: Improment_NVM
2020-01-12, by ideenmodellierer
Bugfix Min max values for device data checks: Improment_NVM
2020-01-12, by ideenmodellierer
Bugfix Display of Sensor values: Improment_NVM
2020-01-12, by ideenmodellierer
Bugfix: display of time of minimum voltag: Improment_NVM
2020-01-12, by ideenmodellierer
We got one report of false/freezd depth reading when jumping into 2m depth
2020-01-08, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
2020-01-05, by heinrichsweikamp
merged default into ImproveBluetooth ImproveBluetooth
2019-12-29, by Ideenmodellierer
Added retry through power off/on cycle: ImproveBluetooth
2019-12-28, by ideenmodellierer
Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
2019-12-21, by ideenmodellierer
Bugfix: Merge / cleanup problem: ImproveBluetooth
2019-12-02, by ideenmodellierer
Added missing enum for configuration states ImproveBluetooth
2019-12-01, by ideenmodellierer
Added function for BlueMod configuration: ImproveBluetooth
2019-11-26, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
2019-11-26, by ideenmodellierer
Configurate FlowCntrl Pins as noPull ImproveBluetooth
2019-11-26, by ideenmodellierer
Bugfix negativ ascend bar: ImproveBluetooth
2019-11-26, by ideenmodellierer
Move Constants and libm to start of firmware ROM block: ImproveBluetooth
2019-11-26, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
2019-12-02, by heinrichsweikamp
Fix case for case sensitive OS maintain-1
2019-12-01, by Jan Mulder
Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
2019-12-01, by Jan Mulder
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
2019-11-24, by heinrichsweikamp
Added key direction awarness to t3, t5 and t6 views: MotionDetection
2019-10-21, by ideenmodellierer
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
2019-10-21, by ideenmodellierer
Consider number of available t3 views in sector handling: MotionDetection
2019-10-17, by ideenmodellierer
Combine variables in a structure to improve readability of code MotionDetection
2019-10-17, by ideenmodellierer
merge default MotionDetection
2019-10-10, by Ideenmodellierer
Simplified pitch detection state machine: MotionDetection
2019-10-10, by ideenmodellierer
Minor code cleanup MotionDetection
2019-10-10, by ideenmodellierer
Added missing customerview selection MotionDetection
2019-09-16, by ideenmodellierer
Incremented "idle window" for scroll detection MotionDetection
2019-09-16, by ideenmodellierer
Motion events effect custom view in dive mode only MotionDetection
2019-09-16, by ideenmodellierer
Added string for Empty/ Debug custom view selection MotionDetection
2019-09-16, by ideenmodellierer
Use Enum values for initialization and setting check: MotionDetection
2019-09-10, by ideenmodellierer
Removed some warnings MotionDetection
2019-09-08, by ideenmodellierer
Add scroll event by pitch angle detection: MotionDetection
2019-09-08, by ideenmodellierer
merged default into MotionDetection MotionDetection
2019-08-19, by Ideenmodellierer
Added parameter for number of sectors to be defined MotionDetection
2019-08-19, by ideenmodellierer
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
2019-08-13, by ideenmodellierer
Added a function to count the active custom views. MotionDetection
2019-08-13, by ideenmodellierer
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
2019-08-13, by ideenmodellierer
Merge default MotionDetection
2019-07-20, by Ideenmodellierer
Fix misalignment of do while loop MotionDetection
2019-06-17, by ideenmodellierer
Bugfix: selection of current view not working MotionDetection
2019-06-17, by ideenmodellierer
Update call of motion detection function MotionDetection
2019-06-17, by ideenmodellierer
Reworked detection function MotionDetection
2019-06-17, by ideenmodellierer
Parameter update MotionDetection
2019-06-11, by Ideenmodellierer
Pass action to customer vie update function. MotionDetection
2019-06-11, by Ideenmodellierer
Added trigger of middle button action in case of a detected shake MotionDetection
2019-05-24, by ideenmodellierer
Added new files for motion detection (shaking) detection MotionDetection
2019-05-24, by ideenmodellierer
Add Support for new end-2019 hardware:
2019-11-24, by heinrichsweikamp
Add Support for new end-2019 hardware:
2019-11-23, by heinrichsweikamp
Add Support for new end-2019 hardware:
2019-11-23, by heinrichsweikamp
Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
2019-10-09, by heinrichsweikamp
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
2019-10-09, by heinrichsweikamp
Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
2019-10-08, by Jan Mulder
Fix merge problem fix-merge-mess
2019-10-08, by Jan Mulder
Merge
2019-10-06, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
2019-10-06, by heinrichsweikamp
Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
2019-10-03, by ideenmodellierer
Minor changes to debug view FlightMode_Improvment
2019-10-03, by ideenmodellierer
Added option to manually leave dive mode to system menu FlightMode_Improvment
2019-10-03, by ideenmodellierer
Added function to support manuel exit of dive mode FlightMode_Improvment
2019-10-03, by ideenmodellierer
Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
2019-10-03, by ideenmodellierer

less more | rev 584: (0) -240 +240 tip

Mercurial > public > ostc4

graph