Mercurial > public > ostc4
graph
-
Added function to support manuel exit of dive mode FlightMode_ImprovmentThu, 03 Oct 2019 21:30:16 +0200, by ideenmodellierer
-
Added function to evaluate the state of the surface pressure history memory FlightMode_ImprovmentThu, 03 Oct 2019 21:26:46 +0200, by ideenmodellierer
-
Removed not used wireless menu items FlightMode_ImprovmentTue, 01 Oct 2019 19:58:58 +0200, by ideenmodellierer
-
Added compile switch to enable debug view option in system menu FlightMode_ImprovmentTue, 01 Oct 2019 19:43:30 +0200, by ideenmodellierer
-
Removed averaging of pressure and temperatur values FlightMode_ImprovmentTue, 01 Oct 2019 19:13:41 +0200, by ideenmodellierer
-
change max. allowed surface pressure to 1030hPa (As in the small OSTC)Sun, 06 Oct 2019 14:07:51 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)Mon, 19 Aug 2019 11:42:31 +0000, by heinrichsweikamp
-
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_ImprovmentSat, 17 Aug 2019 19:03:47 +0200, by ideenmodellierer
-
Added function to avoid divemode activation during Landing: PressureMeasure_ImprovmentSat, 17 Aug 2019 18:57:15 +0200, by ideenmodellierer
-
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:47:08 +0200, by ideenmodellierer
-
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_ImprovmentSat, 17 Aug 2019 18:44:43 +0200, by ideenmodellierer
-
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_ImprovmentTue, 13 Aug 2019 21:46:26 +0200, by ideenmodellierer
-
add update files for testing purposesSat, 20 Jul 2019 10:44:01 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)Thu, 18 Jul 2019 14:26:56 +0000, by heinrichsweikamp
-
Added plausibility check for pressure values I2C_ImprovmentWed, 17 Jul 2019 22:43:51 +0200, by ideenmodellierer
-
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_ImprovmentWed, 17 Jul 2019 22:42:15 +0200, by ideenmodellierer
-
Deactivated internal pullups and I2C interrupt callback I2C_ImprovmentWed, 17 Jul 2019 22:41:31 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)Mon, 01 Jul 2019 14:18:39 +0000, by heinrichsweikamp
-
bugfix: implement battery at end in dive header fix-batt-1Thu, 20 Jun 2019 14:24:57 +0200, by Jan Mulder
-
increase RTE to 1.9 and Firmware to 1.4.9 betaSun, 30 Jun 2019 22:12:15 +0200, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)Sun, 30 Jun 2019 19:52:46 +0000, by heinrichsweikamp
-
Added start of frame detection for HUD data O2_SensorSyncSun, 30 Jun 2019 21:25:58 +0200, by ideenmodellierer
-
Moved indication variable for received HUD data to tCCR file. O2_SensorSyncSun, 30 Jun 2019 21:18:05 +0200, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-version (pull request #27)Wed, 19 Jun 2019 13:12:25 +0000, by heinrichsweikamp
-
bugfix: correct packed main version number in dive header fix-versionWed, 19 Jun 2019 14:31:50 +0200, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)Wed, 19 Jun 2019 13:12:01 +0000, by heinrichsweikamp
-
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:33 +0200, by ideenmodellierer
-
Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:47:19 +0200, by ideenmodellierer
-
Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdateMon, 17 Jun 2019 21:46:56 +0200, by ideenmodellierer
-
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.Sat, 01 Jun 2019 10:12:15 +0200, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)Fri, 31 May 2019 06:22:50 +0000, by heinrichsweikamp
-
bugfix: make stopwatch and divetime run in sync cleanup-4Wed, 29 May 2019 14:02:27 +0200, by Jan Mulder
-
cleanup: factor out SHelper typedef (and more) cleanup-4Fri, 24 May 2019 09:29:29 +0200, by Jan Mulder
-
bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-4Tue, 21 May 2019 11:11:05 +0200, by Jan Mulder
-
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-4Mon, 20 May 2019 13:06:02 +0200, by Jan Mulder
-
bugfix, cleanup: simplify stopwatch logic and fix fallout cleanup-4Mon, 20 May 2019 12:57:31 +0200, by Jan Mulder
-
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-4Mon, 20 May 2019 10:13:44 +0200, by Jan Mulder
-
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-4Mon, 20 May 2019 10:05:27 +0200, by Jan Mulder
-
cleanup: remove commented/unused code, make static cleanup-4Fri, 17 May 2019 21:19:04 +0200, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)Fri, 17 May 2019 06:38:56 +0000, by heinrichsweikamp