Mercurial > public > ostc4
graph
-
Add a line to the compass heading dive menu that shows the currently set heading to enable the Evo_2_233 weeks ago, by heinrichsweikamp
-
Bugfix de-/activation of deco stop consideration in simulator: Evo_2_232 months ago, by ideenmodellierer
-
Dev bugfix: Consider decogas in planner independen from calculation setting: Evo_2_233 months ago, by Ideenmodellierer
-
Added first time initialization for new bluetooth module: Evo_2_234 months ago, by Ideenmodellierer
-
Zusammenf?hren5 months ago, by heinrichsweikamp
-
When opening the logbook, or scrolling inside a logbook page,5 months ago, by heinrichsweikamp
-
Fix incorrect logging of bailout to Open Circuit when using the best gas.5 months ago, by heinrichsweikamp
-
Check line enable/disable state when a new page is selected: Evo_2_239 months ago, by Ideenmodellierer
-
Minor: Remove absolute paths from the reference project files10 months ago, by heinrichsweikamp
-
Consider pressure offset compensation in case of setting a default value: Evo_2_2311 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_2312 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not Evo_2_2313 months ago, by Ideenmodellierer
-
Added selection if an active gas shall be used for deco calculation or not: Evo_2_2313 months ago, by Ideenmodellierer
-
Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_2313 months ago, by Ideenmodellierer
-
Bugfix Line order of info screen with flip screen active: Evo_2_2314 months ago, by Ideenmodellierer
-
Bugfix Flipscreen visualization:14 months ago, by Ideenmodellierer
-
User Test14 months ago, by heinrichsweikamp
-
1.6.5 release15 months ago, by heinrichsweikamp
-
Split definition of custom views:15 months ago, by Ideenmodellierer
-
Added debug information in case an error in the settings has been detected:15 months ago, by Ideenmodellierer
-
1.6.4 release15 months ago, by heinrichsweikamp
-
Testing build15 months ago, by heinrichsweikamp
-
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)15 months ago, by heinrichsweikamp
-
Bugfix CustomView selection during dive mode:15 months ago, by Ideenmodellierer
-
Dev Bugfix: O2 values of new detected sensors were shown as invalid:15 months ago, by Ideenmodellierer
-
Used real sensor state in simulation:15 months ago, by Ideenmodellierer
-
Testing build16 months ago, by heinrichsweikamp
-
Added function to skip lines which are not needed for operation:16 months ago, by Ideenmodellierer
-
Only jump to Sensor view during charging if sensors are connected:16 months ago, by Ideenmodellierer
-
DevBugfix CO2 sensor in streaming mode:16 months ago, by Ideenmodellierer
-
Testing build16 months ago, by heinrichsweikamp
-
Zusammenf?hren16 months ago, by heinrichsweikamp
-
Update Firmware version number16 months ago, by heinrichsweikamp
-
Adds a simple countdown timer, available as a custom view in surface and dive mode.16 months ago, by heinrichsweikamp
-
Cleanup initialisation code:16 months ago, by Ideenmodellierer
-
Cleanup initialisation / deinitialization:16 months ago, by Ideenmodellierer
-
Removed dependency to protocol setting:16 months ago, by Ideenmodellierer
-
Update RTE version number16 months ago, by Ideenmodellierer
-
Cleanup warnings16 months ago, by Ideenmodellierer
-
Added CO2 mirrow instance:16 months ago, by Ideenmodellierer
-
Migrated CO2 protocol implementation to new format:16 months ago, by Ideenmodellierer
-
Use mirror sensortype for visualization:17 months ago, by Ideenmodellierer
-
Expanded Sensor map structure:17 months ago, by Ideenmodellierer
-
Moved DiveO2 sensor specific funtionality into separated file:17 months ago, by Ideenmodellierer
-
Restructure UART based sensor handling:17 months ago, by Ideenmodellierer
-
Bugfix PSCR Settings in Simulator Mode:17 months ago, by Ideenmodellierer
-
update current build for testing17 months ago, by heinrichsweikamp
-
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.17 months ago, by heinrichsweikamp
-
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.17 months ago, by heinrichsweikamp
-
Dev Bugfx Empty buffer indication and stability improvments:18 months ago, by Ideenmodellierer
-
Cleanup sensor data interface:18 months ago, by Ideenmodellierer
-
Change support from Pyroscience -> DiveO2 sensors19 months ago, by heinrichsweikamp
-
Bugfixloop UART multiplexer integration:19 months ago, by Ideenmodellierer
-
Update digital O2 sensor information:19 months ago, by Ideenmodellierer
-
Sensor status support for multiplexed DiveO2 sensors:19 months ago, by Ideenmodellierer
-
Update real multiplexer implementation:19 months ago, by Ideenmodellierer
-
Discovery<=>SmallCPU inferface update:19 months ago, by Ideenmodellierer
-
Added UART multiplexer support for DiveO2:19 months ago, by Ideenmodellierer
-
Zusammenf?hren19 months ago, by heinrichsweikamp
-
Add support for a configurable compass declination in a range of -99 to 99 degrees.19 months ago, by heinrichsweikamp
-
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)19 months ago, by heinrichsweikamp
-
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.20 months ago, by heinrichsweikamp
-
1.6.2 release20 months ago, by heinrichsweikamp
-
Update build for testing20 months ago, by heinrichsweikamp
-
change button default responsiveness to 10020 months ago, by heinrichsweikamp
-
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.20 months ago, by heinrichsweikamp
-
Update build for testing21 months ago, by heinrichsweikamp
-
increase HAL_Delay to 10ms for cold-start-button reset21 months ago, by heinrichsweikamp
-
Preparing a 1.6.2 release candidate21 months ago, by heinrichsweikamp
-
Fix/handle negative scrubber timer values21 months ago, by heinrichsweikamp
-
Quit simualted dives after the dive time set in the SIM tab.21 months ago, by heinrichsweikamp
-
Some compass improvements from mikeller21 months ago, by heinrichsweikamp
-
- Colours for scrubber display when time remaining falls below a threshold value21 months ago, by heinrichsweikamp
-
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:21 months ago, by Ideenmodellierer
-
Added visualization of CO2 during dive:21 months ago, by Ideenmodellierer
-
Cleanup display of multiple warnings in T3 (Big font) view:21 months ago, by Ideenmodellierer
-
Only show autodetection in sensor menu if external interface is present:21 months ago, by Ideenmodellierer
-
Updated outdated comment21 months ago, by Ideenmodellierer
-
Dev Bugfix: Alignment problem in lifedata structure:21 months ago, by Ideenmodellierer
-
resolv merge21 months ago, by Ideenmodellierer
-
Avoid blinking in customer view selection page:22 months ago, by Ideenmodellierer
-
Added enum for Co2 display21 months ago, by Ideenmodellierer
-
Added display of co2 ppm values:22 months ago, by Ideenmodellierer
-
Added pressure compensation to CO2 detection:22 months ago, by Ideenmodellierer
-
Code cleanup sensors under development:22 months ago, by Ideenmodellierer
-
Update Sentinel protocol:22 months ago, by Ideenmodellierer
-
Added DiveO2 fatal error detection:22 months ago, by Ideenmodellierer
-
Enable start dive in Big font display:22 months ago, by Ideenmodellierer
-
Update Sentinel protocol:22 months ago, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:23 months ago, by Ideenmodellierer
-
Added button lock after wakeup in surface mode:23 months ago, by Ideenmodellierer
-
Enable start dive in Big font display:23 months ago, by Ideenmodellierer
-
Added data init function for external interface:23 months ago, by Ideenmodellierer
-
NEW: Add mini compass with marker declination indication22 months ago, by heinrichsweikamp
-
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas22 months ago, by heinrichsweikamp
-
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas22 months ago, by heinrichsweikamp
-
Removed interface selection from sensor menu:23 months ago, by Ideenmodellierer
-
Optical sensor as default:23 months ago, by Ideenmodellierer
-
Fix compiler switch:23 months ago, by Ideenmodellierer
-
Improvment sensor Autodetection:23 months ago, by Ideenmodellierer
-
Update sensor menu support for automatic sensor detection:23 months ago, by Ideenmodellierer
-
Added auto detection functionality for sensors connected to the external interface:23 months ago, by Ideenmodellierer
-
Added sensor map to Firmware <=> RTE inferface:23 months ago, by Ideenmodellierer
-
Enabled CO2 support for beta test phase:23 months ago, by Ideenmodellierer
-
Bugfix data synchronization after RTE start:23 months ago, by Ideenmodellierer
-
Update CO2 sensor implementation:23 months ago, by Ideenmodellierer
-
Development feature: external pressure sensor23 months ago, by Ideenmodellierer
-
DigO2 added raw data request:23 months ago, by Ideenmodellierer
-
Show saturation in large font (T3) view:23 months ago, by Ideenmodellierer
-
DigO2 added raw data request:23 months ago, by Ideenmodellierer
-
Bugfix set date (year):24 months ago, by Ideenmodellierer
-
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)2022-11-27, by heinrichsweikamp
-
Updated menu structure to support new sensor information page:2022-11-20, by Ideenmodellierer
-
Added new info page for extended sensor data:2022-11-20, by Ideenmodellierer
-
Added customizable data area for specific sensor data:2022-11-20, by Ideenmodellierer
-
Increased version number and set beta label2022-11-20, by Ideenmodellierer
-
Added customizable data area for specific sensor data:2022-11-20, by Ideenmodellierer
-
Increased version number and set beta label2022-11-20, by Ideenmodellierer
-
Bugfix PSCR menu button label:2022-11-20, by Ideenmodellierer
-
Development bugfix number of spare bytes in setting structure2022-11-08, by Ideenmodellierer
-
Extension scrubber time:2022-11-08, by Ideenmodellierer
-
Bugfix compass bearing:2022-11-08, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:2022-11-03, by Ideenmodellierer
-
Menu cleanup rebreather specific settings:2022-11-03, by Ideenmodellierer
-
Bugfix: only reset menu if a new sub menu is created:2022-11-03, by Ideenmodellierer
-
Bugfix release frame:2022-11-01, by Ideenmodellierer
-
Added protocol functions for UART DiveO2 sensor:2022-10-28, by Ideenmodellierer
-
Added selection of digital o2 sensor source to HW menu:2022-10-28, by Ideenmodellierer
-
Added digital o2 sensor to settings and data exchange:2022-10-28, by Ideenmodellierer
-
Bugfix display of deactivated sensors:2022-10-28, by Ideenmodellierer
-
Bugfix motioncontrol frame deactivation:2022-10-18, by Ideenmodellierer
-
Cleanup warnings:2022-10-18, by Ideenmodellierer
-
Bugfix Empty menu:2022-09-25, by Ideenmodellierer
-
Improvment key event detection:2022-09-25, by Ideenmodellierer
-
Merge2022-08-19, by heinrichsweikamp
-
Bugfix: Set actual gas after basic dive settings were created: Betatest2022-05-16, by Ideenmodellierer
-
Reduce display brightness in case the charger is connected: Betatest2022-03-12, by Ideenmodellierer
-
Undo Rev. 6602021-11-01, by heinrichs weikamp
-
Add option to reset bluetooth name2021-08-08, by heinrichsweikamp
-
Update build file for testing2021-04-28, by heinrichs weikamp
-
Bugfix handling of new menu tab in flipped mode:2021-04-27, by Ideenmodellierer
-
Update release date2021-04-26, by heinrichs weikamp
-
Added visualization of scrubber time:2021-04-25, by Ideenmodellierer
-
Added count down timer for scrubber time:2021-04-25, by Ideenmodellierer
-
Introduced new menu tab for addition CCR options:2021-04-25, by Ideenmodellierer
-
Bugfix temperature display Logpage2:2021-04-25, by Ideenmodellierer
-
Allow setpoint starting at 0.4 ppO2:2021-04-19, by Ideenmodellierer
-
Automatik setpoint change:2021-04-19, by Ideenmodellierer
-
Automatik setpoint change:2021-04-19, by Ideenmodellierer
-
Bugfix consider checkbox in calculation of right aligned and centered position:2021-04-19, by Ideenmodellierer
-
Motion detection: Enable focus after focus calibration:2021-04-19, by Ideenmodellierer
-
Integrated selection of bailout in the diluent selection page:2021-04-13, by Ideenmodellierer
-
Remove battery charge counter from information menu:2021-04-13, by Ideenmodellierer
-
Small changes in charger state handling:2021-04-13, by Ideenmodellierer
-
Compile with ENABLE_CHARGER_STATUS_V22021-03-30, by heinrichs weikamp
-
Reimplemented charger status generation (deactivated):2021-03-24, by Ideenmodellierer
-
Do not show focus indicator in case motion detection is suspended:2021-03-24, by Ideenmodellierer
-
Development Bugfix Deco bars not shown after last deco stop passed:2021-03-11, by Ideenmodellierer
-
Development bugfix Viewport settings:2021-03-11, by Ideenmodellierer
-
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.62021-02-25, by heinrichsweikamp
-
Added last measured PPO2 value to sensor selection dialog:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Debounce fallback warning:2021-02-24, by Ideenmodellierer
-
Enable sensor check for Analog PPO2 mode:2021-02-24, by Ideenmodellierer
-
Added menu structure to allow ppo2 modification in simulator mode:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Warnings:2021-02-23, by Ideenmodellierer
-
Added functionality to add ppo2 mV offset:2021-02-23, by Ideenmodellierer
-
Added compile switch for T3_PROFILE menu operation option2021-02-12, by Ideenmodellierer
-
Improve in / out of focus transitions:2021-02-12, by Ideenmodellierer
-
Added option to select sensitivity of focus detection:2021-02-12, by Ideenmodellierer
-
Switch Sector / Scroll detection to vector implementation:2021-02-08, by Ideenmodellierer
-
Development bugfix: Marker in standard t3 view drawn in wrong direction2021-02-07, by Ideenmodellierer
-
Improvment frame Handling:2021-02-07, by Ideenmodellierer
-
Adjustments for flipped display view:2021-02-03, by Ideenmodellierer
-
Use roll and pitch agles in 0-360 format:2021-02-03, by Ideenmodellierer
-
Added minilog functions to allow marker synchronisation:2021-01-27, by Ideenmodellierer
-
Added t3 quick menu for marker synchronisation:2021-01-27, by Ideenmodellierer
-
Development bugfix: focus state not remembered:2021-01-27, by Ideenmodellierer
-
Development bugfix: Low battery warning was interpretated as marker:2021-01-27, by Ideenmodellierer
-
Development bugfix: show replay symbol only for the selected dive:2021-01-27, by Ideenmodellierer
-
Moved non critical functions from timer interrupt to main loop:2021-01-27, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:2021-01-20, by Ideenmodellierer
-
Added "Set Marker" to T3 quick menu:2021-01-15, by Ideenmodellierer
-
Bugfix inverted whitspace:2021-01-15, by Ideenmodellierer
-
Suspend MotionDetection events while diver is operationg the OSTC:2021-01-14, by Ideenmodellierer
-
Added access to logbook marker data:2021-01-14, by Ideenmodellierer
-
Bugfix: CalibViewport were shown even in case the compile switch had not been set:2021-01-14, by Ideenmodellierer
-
Update RTE required value for release2021-02-05, by heinrichsweikamp
-
Added tag v1.5.6 release for changeset 06ec1da5e1052021-02-05, by heinrichsweikamp
-
change O2_CALIB_FRACTION_O2 to 0.982021-01-07, by heinrichsweikamp
-
Merged menu items of viewport and motion control:2021-01-06, by Ideenmodellierer
-
T3 profile view: Added visualization of deco data2021-01-06, by Ideenmodellierer
-
Added replay data scaling in case life data is longer than replay block2021-01-05, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:2021-01-04, by Ideenmodellierer
-
Added compile switch for new T3 View Profile2021-01-04, by Ideenmodellierer
-
Bugfix T3 skip deactivated views:2021-01-04, by Ideenmodellierer
-
New replay block for T3 profile:2021-01-04, by Ideenmodellierer
-
MotionControl-Sector: Map sectors during switch T7 <=> T3:2021-01-04, by Ideenmodellierer
-
Added functionality to select a dive to be shown in the T3 profile view:2021-01-04, by Ideenmodellierer
-
Bugfix Selection of primary view:2021-01-04, by Ideenmodellierer
-
Added compile switch for new T3 View Profile2021-01-04, by Ideenmodellierer
-
Added PrintGraph option to skip invalid data entries:2021-01-04, by Ideenmodellierer
-
MotionCtrl - Sectorview Map sectors directly to custom views:2021-01-03, by Ideenmodellierer
-
Minor: Comment translation into English2021-01-06, by heinrichsweikamp
-
Align VPM tag in log list to be at same position as GF tag:2020-12-22, by Ideenmodellierer
-
Minor: Update the documentation for building the code2020-12-17, by heinrichsweikamp
-
Update current build, "RTErequired" value and release date2020-12-17, by heinrichsweikamp
-
update ostc4pack sample files2020-12-16, by heinrichsweikamp
-
Motion control: Jump back to primary view if focus is lost:2020-12-13, by Ideenmodellierer
-
Reduced view angle and number of vusiualized custom views in setor mode:2020-12-13, by Ideenmodellierer
-
Added option for 100% o2 calibration:2020-12-12, by Ideenmodellierer
-
Solved minor warnings2020-12-12, by Ideenmodellierer
-
Show Fallback if no valid sensor value is available:2020-12-12, by Ideenmodellierer
-
Added ex Interface measurement restart in case of i2c disturbance:2020-12-12, by Ideenmodellierer
-
Bugfix bad resolution of compass LSM303AGR:2020-12-12, by Ideenmodellierer
-
Minor: Functional inert cleanup of some unused variables2020-12-03, by heinrichsweikamp
-
Rework pitch detection:2020-11-29, by Ideenmodellierer
-
Handle o2 voltage values < 0.5mV as invalid:2020-11-29, by Ideenmodellierer
-
Return to o2 values:2020-11-29, by Ideenmodellierer
-
Change style of viewport calibration menu:2020-11-29, by Ideenmodellierer
-
Improved focus detection:2020-11-25, by Ideenmodellierer
-
Update String "Blickwinkel":2020-11-25, by Ideenmodellierer
-
Added debug view to viewport calibration:2020-11-25, by Ideenmodellierer
-
Reactivate compass parameter stored in NVM:2020-11-25, by Ideenmodellierer
-
Try to reduce legth of log entry string:2020-11-30, by Ideenmodellierer
-
Added new section "lower.font":2020-11-30, by Ideenmodellierer
-
Minor: Update the documentation for building the code2020-11-29, by heinrichsweikamp
-
-Add 12HR Time Support2020-11-24, by izzni
-
add current build2020-11-21, by heinrichsweikamp
-
Bugfix center / right alignment if dualfont is used:2020-11-15, by Ideenmodellierer
-
Bugfix One or more deactivated sensors hide sensor display:2020-11-15, by Ideenmodellierer
-
Refine o2 sensor diagnostic functions:2020-11-15, by Ideenmodellierer
-
Added ADC sensor interface to O2 sensore menu structure:2020-11-15, by Ideenmodellierer
-
Solved minor warnings2020-11-15, by Ideenmodellierer
-
Added O2 sensor source and calibration parameters to setting structure2020-11-15, by Ideenmodellierer
-
Check if HW evaluation was performed:2020-11-15, by Ideenmodellierer
-
Changed operation mode of RecoverSampleIndex:2020-11-12, by Ideenmodellierer
-
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:2020-11-12, by Ideenmodellierer
-
Switch source of o2 sensor data depending on availability of external ADC:2020-11-12, by Ideenmodellierer
-
Added HW_Info to Discovery <=> RTE data exchange:2020-11-12, by Ideenmodellierer
-
Added external ADC interface functionality (MCP3424):2020-11-12, by Ideenmodellierer
-
Added color indicator for focus state:2020-11-08, by Ideenmodellierer
-
Added menu structure to acces viewport calibration:2020-11-08, by Ideenmodellierer
-
Added viewport functionality:2020-11-08, by Ideenmodellierer
-
Make sure motion detection settings are set to default values:2020-11-08, by Ideenmodellierer
-
Only execute motion detection functions if features is enabled:2020-11-08, by Ideenmodellierer
-
Update roll and pitch value in simulation mode:2020-11-08, by Ideenmodellierer
-
Added viewport calibration to dive menu:2020-11-02, by Ideenmodellierer
-
Added new settings for Viewport:2020-11-02, by Ideenmodellierer
-
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h2020-11-03, by heinrichsweikamp
-
add current build2020-11-02, by heinrichsweikamp
-
Shortend t3 view names:2020-10-11, by Ideenmodellierer
-
Added new t3 view showing first deco stop and tts in parallel:2020-10-10, by Ideenmodellierer
-
Added default view selection and auto return to view to t3 visualization:2020-10-10, by Ideenmodellierer
-
Bugfix return from submenu in t3 view:2020-10-10, by Ideenmodellierer
-
Added inertia simulation for compass heading:2020-10-10, by Ideenmodellierer
-
BugFix firmware downgrade to version with less settings:2020-10-10, by Ideenmodellierer
-
Added center / right alignment option to custom text display:2020-10-07, by Ideenmodellierer
-
Changed visualization of Depth / temperatur / debugview entry2020-10-07, by Ideenmodellierer
-
Increased max value for surface pressure:2020-10-07, by Ideenmodellierer
-
Added tag 1.5.5 release for changeset 02e7e11fdbe82020-10-04, by heinrichsweikamp
-
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release2020-09-25, by heinrichsweikamp
-
add current build2020-09-16, by heinrichsweikamp
-
Bugfix custom view selection dialog:2020-09-15, by Ideenmodellierer
-
Bugfix: No need to consider surface custom view in count of enabled view:2020-09-15, by Ideenmodellierer
-
Added skip condition in custom view selection:2020-09-15, by Ideenmodellierer
-
Added new option to gas configuration: "Off":2020-09-13, by Ideenmodellierer
-
Do not show gases in "Off" state in custom gas list:2020-09-13, by Ideenmodellierer
-
Added new option to gas configuration: "Off":2020-09-13, by Ideenmodellierer
-
Change color ID used in strings for light grey:2020-09-13, by Ideenmodellierer
-
Minor: Removed duplicated definition of number of available gases2020-09-13, by Ideenmodellierer
-
Changed string for data view selections:2020-09-10, by Ideenmodellierer
-
Added compile switch for motion control:2020-09-10, by Ideenmodellierer
-
Move Bigfont and motion Ctrl selection menu out of custom view submenu:2020-09-10, by Ideenmodellierer
-
Moved custom view menu to new tab:2020-09-08, by Ideenmodellierer
-
Reset Safety Stop display in case of a new descend:2020-09-06, by Ideenmodellierer
-
Added T3_gaslist:2020-09-06, by Ideenmodellierer
-
Added color coding for cv gas list:2020-09-06, by Ideenmodellierer
-
Added quick menu function to big font view:2020-09-06, by Ideenmodellierer
-
Added missing display of button labels in refresh function:2020-09-06, by Ideenmodellierer
-
Properly send compass 3 into sleepmode (end-2019 hardware)2020-09-16, by heinrichsweikamp
-
Merge2020-08-31, by heinrichsweikamp
-
Added new strings for the selection of T3 custom views2020-08-30, by Ideenmodellierer
-
Minor adaptions in page layout:2020-08-30, by Ideenmodellierer
-
Display warning in t7 using centered strings2020-08-30, by Ideenmodellierer
-
Show page number in small letters if more than 8 tabs are active2020-08-30, by Ideenmodellierer
-
Reimplementation of tMenuEdit_select:2020-08-30, by Ideenmodellierer
-
Added new menu tab into call structure2020-08-30, by Ideenmodellierer
-
Added new top level menu for customization of views2020-08-30, by Ideenmodellierer
-
Removed second big font profile2020-08-30, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix right alignment of dualfont strings2020-08-24, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combination2020-08-24, by Ideenmodellierer
-
Added compile switch to enable / disable new BigFont layout2020-08-24, by Ideenmodellierer
-
Added dew parameter to enable selection of customer BigFont screens to be displayed2020-08-24, by Ideenmodellierer
-
Added worst case plausibility check (disabled by compile switch)2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix display of disabled screen.2020-08-24, by Ideenmodellierer
-
Bugfix right alignment of dualfont strings2020-08-24, by Ideenmodellierer
-
Added possibility to switch between "classic" bigfont views and a selection with a new information combination2020-08-24, by Ideenmodellierer
-
Added compiler switch for existing debug view parameter2020-08-20, by Ideenmodellierer
-
Added tag v1.5.4 release for changeset e9ca66ce36e52020-08-10, by heinrichsweikamp
-
add wiki sub-directory2020-06-29, by heinrichsweikamp
-
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way2020-06-27, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)2020-05-26, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)2020-05-19, by heinrichsweikamp
-
Development option only: Show Pressure update for a short time in the custom field (as warning) Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Only switch between "no fly" and "desaturation" in case there is desaturation time left: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Balance value of button responsitivness were not considered during firmware startup: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Added error detection for reading of ADC values in sleep mode: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Do not signal power on reset in case of a "warm" reset: Improve_Button_Sleep2020-05-12, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)2020-04-28, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)2020-04-15, by heinrichsweikamp
-
Moved and deactivated analyse sample buffer switch: Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Cmd Get profile: transmit dummy profile if necessary Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Removed invalidate header function because it is no lonnger needed Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Compare profile length from header and sample data to identify valid profiles Improve_Logtansfer2020-04-14, by ideenmodellierer
-
Added compile switch to handle additional data during raw header request: Improve_Logtansfer2020-04-13, by ideenmodellierer
-
Power-down Bluetooth on COMM exit2020-04-08, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)2020-03-30, by heinrichsweikamp
-
Activated reset of sample information within header data at time of sector erasing: minor_improvments2020-03-29, by ideenmodellierer
-
Transfer a dummy profile in case of missing sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvments2020-03-24, by ideenmodellierer
-
Reactivated samples for bottle pressure information: minor_improvments2020-03-24, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Added compile variant enabling the reset of profile sample information: minor_improvments2020-03-24, by ideenmodellierer
-
Allocate received bar value to active gas (was static allocated to gas[1]) minor_improvments2020-03-24, by ideenmodellierer
-
Added initialization of bottle sensor data age counter minor_improvments2020-03-23, by ideenmodellierer
-
Added compile switch to show voltage parallel to charge status percantage minor_improvments2020-03-23, by ideenmodellierer
-
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose) minor_improvments2020-03-23, by ideenmodellierer
-
Introduced configuration header for variant managment: minor_improvments2020-03-05, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
Introduced enum for lower left corner view selection: minor_improvments2020-02-29, by ideenmodellierer
-
fix potential issue with >255 dives in the logbook2020-03-01, by heinrichsweikamp
-
Added tag v1.5.3 release for changeset 5b4c78c36b042020-02-27, by heinrichsweikamp
-
update the 1.5.3 for tests2020-02-24, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)2020-02-24, by heinrichsweikamp
-
Bugfix display battery voltage in maintainance menu: Improve_BatteryGasGauge2020-02-23, by ideenmodellierer
-
Reduced timeout for common UART communication: Improve_BatteryGasGauge2020-02-23, by ideenmodellierer
-
show battery percent and voltage and surfacemode. That gives additional2020-02-18, by heinrichsweikamp
-
make a 1.5.3 for tests2020-02-18, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)2020-02-18, by heinrichsweikamp
-
Marked possible code improvment for future activities: ImprovmentNVM_22020-02-17, by ideenmodellierer
-
Added (optional) menu item to analyse log sample buffer: ImprovmentNVM_22020-02-15, by ideenmodellierer
-
Merged in janlmulder/ostc4/maintain-2 (pull request #38)2020-02-10, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)2020-01-15, by heinrichsweikamp
-
Added compile switch for restoring of last known date after power lost: Improment_NVM2020-01-14, by ideenmodellierer
-
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM2020-01-13, by ideenmodellierer
-
We got one report of false/freezd depth reading when jumping into 2m depth2020-01-08, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)2020-01-05, by heinrichsweikamp
-
Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth2019-12-21, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetooth2019-11-26, by ideenmodellierer
-
Added start of module configuration after eache modul power on ImproveBluetooth2019-11-26, by ideenmodellierer
-
Move Constants and libm to start of firmware ROM block: ImproveBluetooth2019-11-26, by ideenmodellierer
-
Merged in janlmulder/ostc4/maintain-1 (pull request #35)2019-12-02, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)2019-11-24, by heinrichsweikamp
-
Added key direction awarness to t3, t5 and t6 views: MotionDetection2019-10-21, by ideenmodellierer
-
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection2019-10-21, by ideenmodellierer
-
Consider number of available t3 views in sector handling: MotionDetection2019-10-17, by ideenmodellierer
-
Combine variables in a structure to improve readability of code MotionDetection2019-10-17, by ideenmodellierer
-
Use Enum values for initialization and setting check: MotionDetection2019-09-10, by ideenmodellierer
-
Added trigger of middle button action in case of a detected shake MotionDetection2019-05-24, by ideenmodellierer
-
Added new files for motion detection (shaking) detection MotionDetection2019-05-24, by ideenmodellierer
-
Add Support for new end-2019 hardware:2019-11-24, by heinrichsweikamp
-
Add Support for new end-2019 hardware:2019-11-23, by heinrichsweikamp
-
Add Support for new end-2019 hardware:2019-11-23, by heinrichsweikamp
-
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)2019-10-09, by heinrichsweikamp
-
Merge2019-10-06, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)2019-10-06, by heinrichsweikamp
-
Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment2019-10-03, by ideenmodellierer
-
Added option to manually leave dive mode to system menu FlightMode_Improvment2019-10-03, by ideenmodellierer
-
Added function to support manuel exit of dive mode FlightMode_Improvment2019-10-03, by ideenmodellierer
-
Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment2019-10-03, by ideenmodellierer
-
Added compile switch to enable debug view option in system menu FlightMode_Improvment2019-10-01, by ideenmodellierer
-
Removed averaging of pressure and temperatur values FlightMode_Improvment2019-10-01, by ideenmodellierer
-
change max. allowed surface pressure to 1030hPa (As in the small OSTC)2019-10-06, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)2019-08-19, by heinrichsweikamp
-
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment2019-08-17, by ideenmodellierer
-
Added function to avoid divemode activation during Landing: PressureMeasure_Improvment2019-08-17, by ideenmodellierer
-
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment2019-08-17, by ideenmodellierer
-
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment2019-08-17, by ideenmodellierer
-
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment2019-08-13, by ideenmodellierer
-
add update files for testing purposes2019-07-20, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)2019-07-18, by heinrichsweikamp
-
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_Improvment2019-07-17, by ideenmodellierer
-
Deactivated internal pullups and I2C interrupt callback I2C_Improvment2019-07-17, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)2019-07-01, by heinrichsweikamp
-
increase RTE to 1.9 and Firmware to 1.4.9 beta2019-06-30, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)2019-06-30, by heinrichsweikamp
-
Moved indication variable for received HUD data to tCCR file. O2_SensorSync2019-06-30, by ideenmodellierer
-
Merged in janlmulder/ostc4/fix-version (pull request #27)2019-06-19, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)2019-06-19, by heinrichsweikamp
-
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdate2019-06-17, by ideenmodellierer
-
Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdate2019-06-17, by ideenmodellierer
-
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.2019-06-01, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)2019-05-31, by heinrichsweikamp
-
bugfix, consistency: show deco/NDL really after 1 minute divetime cleanup-42019-05-21, by Jan Mulder
-
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime cleanup-42019-05-20, by Jan Mulder
-
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync cleanup-42019-05-20, by Jan Mulder
-
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level cleanup-42019-05-20, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)2019-05-17, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)2019-05-13, by heinrichsweikamp
-
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware. v1.4.8 release2019-05-06, by heinrichsweikamp
-
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware2019-05-06, by heinrichsweikamp
-
add update files for testing purposes2019-05-05, by heinrichsweikamp
-
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)2019-05-02, by heinrichsweikamp
-
translate some comments into english2019-05-01, by heinrichsweikamp
-
Fix typos (There are still many...)2019-05-01, by heinrichsweikamp
-
Make RTE show as 1.8.0 beta, add update files for testing purposes2019-04-29, by heinrichsweikamp
-
add update files for testing purposes2019-04-28, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)2019-04-28, by heinrichsweikamp
-
Do not mark data as valid if devicedata is received. IPC_Sync_Improvment_32019-04-28, by ideenmodellierer
-
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta2019-04-28, by heinrichsweikamp
-
Merged in janlmulder/ostc4/write-from-sim (pull request #20)2019-04-28, by heinrichsweikamp
-
cleanup: also write gas and setpoint changes in simulator mode write-from-sim2019-04-27, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)2019-04-26, by heinrichsweikamp
-
Increase SPI com timeout for cold start and wake up IPC_Sync_Improvment_22019-04-14, by ideenmodellierer
-
Sync to Main 100ms time stamp & added Reinitialization of globals after startup IPC_Sync_Improvment_22019-04-14, by ideenmodellierer
-
Forward 100ms time stamp to RTE and handle logbook in main loop IPC_Sync_Improvment_22019-04-14, by ideenmodellierer
-
Merged in janlmulder/ostc4/bm-3 (pull request #19)2019-04-23, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-2 (pull request #17)2019-04-12, by heinrichsweikamp
-
Merged in janlmulder/ostc4/bm-1 (pull request #16)2019-04-11, by heinrichsweikamp
-
add update files for testing purposes2019-04-10, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)2019-04-09, by heinrichsweikamp
-
cleanup, bugfix: do not mask I2C_SystemStatus with local variable div-fixes-52019-04-08, by Jan Mulder
-
Minor: translating some comments and variable names into english, some cleanup in tComm.c2019-04-06, by heinrichsweikamp
-
add update files for testing purposes2019-04-06, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)2019-04-06, by heinrichsweikamp
-
add update files for testing purposes2019-04-02, by heinrichsweikamp
-
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)2019-04-01, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)2019-04-01, by heinrichsweikamp
-
Added schedule point for functions executed once in a second Improve_IPC_Sync2019-03-31, by ideenmodellierer
-
Splitted 120 seconds UART timeout into chunks of 500ms Improve_IPC_Sync2019-03-31, by ideenmodellierer
-
Moved display refresh and button action function from tim callback to main loop Improve_IPC_Sync2019-03-31, by ideenmodellierer
-
Merged in janlmulder/ostc4/edit-fix (pull request #11)2019-03-28, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cv-persistent (pull request #10)2019-03-26, by heinrichsweikamp
-
New feature: do not show sensor customviews when no sensors attached cv-persistent2019-03-26, by Jan Mulder
-
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)2019-03-24, by heinrichsweikamp
-
Deleted duplicated header file (keep the one stored in common) ImprovmentSPI2019-03-24, by ideenmodellierer
-
merge fork2019-03-23, by Ideenmodellierer
-
Merged heinrichsweikamp/ostc4 into default2019-03-17, by Thorsten
-
Merged Cleanup_Compass_Wireless into default2019-03-16, by Thorsten
-
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)2019-03-22, by heinrichsweikamp
-
cleanup: another cleanup session (data_exchange_main.c) div-fixes-cleaup-22019-03-21, by Jan Mulder
-
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)2019-03-19, by heinrichsweikamp
-
Merged in janlmulder/ostc4/avg-temp (pull request #6)2019-03-15, by heinrichsweikamp
-
Bugfix: average temperature on arrival from RTE instead of display time avg-temp2019-03-15, by Jan Mulder
-
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)2019-03-15, by heinrichsweikamp
-
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)2019-03-15, by heinrichsweikamp
-
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful2019-03-13, by heinrichsweikamp
-
Merged in janlmulder/ostc4/max-depth (pull request #3)2019-03-12, by heinrichsweikamp
-
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS2019-03-10, by heinrichsweikamp
-
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)2019-03-10, by heinrichsweikamp
-
Bugfix: highlight the menu underline correctly on selected state cleanup-12019-03-10, by Jan Mulder
-
Minor: Some documentation for new hardware2019-03-08, by heinrichsweikamp
-
Merged in janlmulder/ostc4/linux-build (pull request #1)2019-03-07, by heinrichsweikamp
-
Merge with FlipDisplay2019-03-07, by heinrichsweikamp
-
Place CNS and pressure within the screen (avoid clipping) FlipDisplay2019-03-02, by Ideenmodellierer
-
RTE Version 1.7 needed because of protocoll and baud rate change FlipDisplay2019-03-02, by Ideenmodellierer
-
Get version from local memory instead from incoming data FlipDisplay2019-02-28, by Ideenmodellierer
-
Introduces abort of communication in case of a out of sync DMA transfer FlipDisplay2019-02-19, by Ideenmodellierer
-
Intoduced transfer abort function for data exchange recovery FlipDisplay2019-02-19, by Ideenmodellierer
-
Add compile switch to disable optimization for specific function FlipDisplay2019-02-19, by Ideenmodellierer
-
Update of configuration and projectfiles to support new library folder structure FlipDisplay2019-02-17, by Ideenmodellierer
-
Minor changes to improved code quality and to eliminate warnings FlipDisplay2019-02-17, by Ideenmodellierer
-
Added function to initialise structures with the actual ambient pressure FlipDisplay2019-02-17, by Ideenmodellierer
-
Added current STM32 standandard libraries in version independend folder structure FlipDisplay2019-02-17, by Ideenmodellierer
-
Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay2019-01-27, by Ideenmodellierer
-
Change GPIO speed for SPI communication as recommended by STM32 Errata FlipDisplay2019-01-27, by Ideenmodellierer
-
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings) FlipDisplay2019-01-27, by Ideenmodellierer
-
Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay2019-01-01, by Ideenmodellierer
-
Added new nvm parameter"FlipDisplay" indicating the screen orientation FlipDisplay2019-01-01, by Ideenmodellierer
-
Added option to handled mirrored display to existing functions FlipDisplay2019-01-01, by Ideenmodellierer
-
First stable. With minimal button sensitivity fix(for broken buttons) kittz2018-11-26, by Dmitry Romanov
-
Added Spanish language2018-10-06, by heinrichsweikamp
-
Added Fontpack reference project2018-10-04, by Ideenmodellierer
-
Added script to pack FontPack2018-10-04, by Ideenmodellierer
-
Starting Firmware 1.4 the fontpack version 1.0 is needed2018-10-04, by Ideenmodellierer
-
Update Fontpack code to support font moved to upper memory2018-10-04, by Ideenmodellierer
-
Update version info2018-10-04, by Ideenmodellierer
-
Move font to upper memory2018-10-04, by Ideenmodellierer
-
Add definitions for Fonts to be placed in upper flash2018-10-04, by Ideenmodellierer
-
Merge2018-09-11, by heinrichsweikamp
-
remove wiki files from repo2018-09-05, by heinrichsweikamp
-
old (and new) compass support2018-09-11, by heinrichsweikamp
-
1.3.8 forum release2018-08-30, by heinrichsweikamp
-
Update image size for 'F'ahrenheit2018-08-22, by Ideenmodellierer
-
Bugfix: FutureTTS and Fahrenheit not displayed correct2018-08-22, by Ideenmodellierer
-
language updates2018-08-15, by heinrichsweikamp
-
language updates2018-08-14, by heinrichsweikamp
-
typo in info menu...2018-08-14, by heinrichsweikamp
-
Replaced wait loop with delay fct2018-08-13, by Ideenmodellierer
-
Bugfix font elements (ue missing)2018-08-12, by Ideenmodellierer
-
rename update batch file2018-08-11, by heinrichsweikamp
-
more language updates2018-08-10, by heinrichsweikamp
-
language updates2018-08-10, by heinrichsweikamp
-
Added UTF8 decode function2018-08-09, by Ideenmodellierer
-
Resolve format warnings2018-08-09, by Ideenmodellierer
-
language updates2018-08-07, by heinrichsweikamp
-
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...2018-08-06, by heinrichsweikamp
-
Added missing ENTRY point2018-08-05, by Ideenmodellierer
-
Allow RTE binaries > 64k size2018-08-05, by Ideenmodellierer
-
Added reference projects2018-08-05, by Ideenmodellierer
-
Resolved warnings pointing to possible invalid memory access2018-07-31, by Ideenmodellierer
-
remove hgsub files2018-07-30, by heinrichsweikamp
-
add o4pack files2018-07-30, by heinrichsweikamp
-
Increased version number2018-07-29, by Ideenmodellierer
-
Added instruction to optimize for size2018-07-29, by Ideenmodellierer
-
Always include Fonts library (to have the adresses defined)2018-07-29, by Ideenmodellierer
-
Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations2018-07-29, by Ideenmodellierer
-
Placed directory sections in firmware memory space2018-07-29, by Ideenmodellierer
-
Split memory areas and reverse engineered font library2018-07-29, by Ideenmodellierer
-
Force reset in case of a hard fault2018-07-29, by Ideenmodellierer
-
Non functional change just to use same symbols as CPU12018-07-29, by Ideenmodellierer
-
Aligned structure with CPU1 linker file2018-07-29, by Ideenmodellierer
-
Increase version number2018-07-29, by Ideenmodellierer
-
include in ostc4 repository2018-04-28, by heinrichsweikamp
-
init2018-04-28, by heinrichsweikamp
-
Update author name for release2018-04-28, by heinrichsweikamp
-
... more GPL License and general cleanups2018-03-07, by jDG
-
... OpenOCD scripts to dump firmwares (not working)2018-03-07, by jDG
-
... minor warnings2018-02-27, by jDG
-
change author name to heinrichs weikamp gmbh2018-02-10, by heinrichsweikamp
-
[ADD]Discovery/Src licences, plus reindentation2018-02-06, by jDG
-
ADD GPL License ...2018-01-23, by jDG
-
ADD script to set GPL headers2018-01-23, by jDG
-
... Fighting with internal oscillator.2018-01-10, by JeanDo
-
ADD C indentation standard2018-01-10, by JeanDo
-
... single step in Discovery code: trying to have an oscillator.2018-01-09, by jDG
-
FIX move bootloader SFirmwareData at fixed address 0x0800A0002018-01-03, by jdg
-
ADD font check code that runs at FontPack installation.2018-01-01, by JeanDo
-
ADD missing chars in FontPack2018-01-01, by JeanDo
-
FIX need to link actual FirmwareData too...2018-01-01, by JeanDo
-
FIX shared SFirmwareData signature at fixed address2018-01-01, by JeanDo
-
NEW shared font directory at 0x081E00002017-12-30, by jdg
-
... more docs2017-12-26, by jdg
-
... typo in subrepo ?2017-12-26, by jdg
-
ADD wiki sub-repos2017-12-26, by jdg
-
... FontPack CPU1 project2017-12-26, by jdg
-
FIRST CPU2-RTE LINKING VERSION2017-12-19, by JeanDo
-
FIX move fonts to UPPER ROM SECTION (above 0x8100000)2017-12-19, by JeanDo
-
ADD CPU1 pin layout2017-12-19, by JeanDo
-
FIRST CPU1-DISCOVERY LINKING VERSION2017-12-19, by jDG
-
CLEANUP move driver code to Common/Drivers2017-12-19, by jDG
-
FIX text_multilanguage shall be compiled once2017-12-18, by JeanDo
-
FIX recover jeopardized fonts & images structure2017-12-18, by JeanDo
-
... move absolute data to named sections2017-12-18, by jDG
-
CLEAN retrieve original startup code. reset linker script.2017-12-18, by jDG
-
... more clean2017-12-15, by JeanDo
-
MOVE files for other applications2017-12-15, by JeanDo
-
... debugging Discovery project compilation.2017-12-13, by jDG
-
CLEANUP remove duplicated support sources2017-12-13, by jDG
-
CLEANUP make svn: subdirectories windows and macos compatibles2017-12-13, by jDG
-
Add chip documentations2017-12-12, by jDG
-
ADD sub repositories2017-12-12, by jDG