ostc4: revision graph

graph

less more | rev 421: (0) -112 +112 tip

Enable sequentionel writing of device data: ImprovmentNVM_2
Mon, 10 Feb 2020 19:25:09 +0100, by ideenmodellierer
Optimize ef_write_block function: ImprovmentNVM_2
Mon, 10 Feb 2020 19:15:27 +0100, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
Mon, 10 Feb 2020 08:23:15 +0000, by heinrichsweikamp
Added tag v1.5.2.beta release for changeset 54a480c43e97 maintain-2
Fri, 07 Feb 2020 16:38:11 +0100, by Jan Mulder
1.5.2 beta with RTE 2.02 v1.5.2.beta release
Wed, 15 Jan 2020 13:41:01 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
Wed, 15 Jan 2020 10:53:15 +0000, by heinrichsweikamp
merged default into Improvment_NVM Improment_NVM
Tue, 14 Jan 2020 21:52:15 +0100, by Ideenmodellierer
Added compile switch for restoring of last known date after power lost: Improment_NVM
Tue, 14 Jan 2020 21:38:45 +0100, by ideenmodellierer
Bugfix Flipdisplay Gauge and Apnoe mode: Improment_NVM
Tue, 14 Jan 2020 21:10:37 +0100, by ideenmodellierer
Bugfix: Warnings displayed in Gauge Mode: Improment_NVM
Tue, 14 Jan 2020 21:08:45 +0100, by ideenmodellierer
Bugfix: Limit log length in case of corrupted sample storage: Improment_NVM
Mon, 13 Jan 2020 20:27:57 +0100, by ideenmodellierer
Bugfix display compass calibration frozen: Improment_NVM
Sun, 12 Jan 2020 21:33:13 +0100, by ideenmodellierer
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter Improment_NVM
Sun, 12 Jan 2020 19:55:22 +0100, by ideenmodellierer
Bugfix invalid voltage / temperatur after coldstart: Improment_NVM
Sun, 12 Jan 2020 19:50:14 +0100, by ideenmodellierer
Bugfix parallel call of external flash functions: Improment_NVM
Sun, 12 Jan 2020 18:06:59 +0100, by ideenmodellierer
Bugfix Min max values for device data checks: Improment_NVM
Sun, 12 Jan 2020 17:57:11 +0100, by ideenmodellierer
Bugfix Display of Sensor values: Improment_NVM
Sun, 12 Jan 2020 17:47:02 +0100, by ideenmodellierer
Bugfix: display of time of minimum voltag: Improment_NVM
Sun, 12 Jan 2020 17:45:36 +0100, by ideenmodellierer
We got one report of false/freezd depth reading when jumping into 2m depth
Wed, 08 Jan 2020 15:35:15 +0100, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
Sun, 05 Jan 2020 14:57:50 +0000, by heinrichsweikamp
merged default into ImproveBluetooth ImproveBluetooth
Sun, 29 Dec 2019 09:42:16 +0100, by Ideenmodellierer
Added retry through power off/on cycle: ImproveBluetooth
Sat, 28 Dec 2019 19:42:04 +0100, by ideenmodellierer
Revert change to keep connection open in case of BlueMod messages: ImproveBluetooth
Sat, 21 Dec 2019 20:21:26 +0100, by ideenmodellierer
Bugfix: Merge / cleanup problem: ImproveBluetooth
Mon, 02 Dec 2019 22:03:05 +0100, by ideenmodellierer
Added missing enum for configuration states ImproveBluetooth
Sun, 01 Dec 2019 19:55:15 +0100, by ideenmodellierer
Added function for BlueMod configuration: ImproveBluetooth
Tue, 26 Nov 2019 22:12:25 +0100, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:17:57 +0100, by ideenmodellierer
Added start of module configuration after eache modul power on ImproveBluetooth
Tue, 26 Nov 2019 21:16:36 +0100, by ideenmodellierer
Configurate FlowCntrl Pins as noPull ImproveBluetooth
Tue, 26 Nov 2019 21:14:58 +0100, by ideenmodellierer
Bugfix negativ ascend bar: ImproveBluetooth
Tue, 26 Nov 2019 18:13:26 +0100, by ideenmodellierer
Move Constants and libm to start of firmware ROM block: ImproveBluetooth
Tue, 26 Nov 2019 18:02:48 +0100, by ideenmodellierer
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
Mon, 02 Dec 2019 07:56:47 +0000, by heinrichsweikamp
Fix case for case sensitive OS maintain-1
Sun, 01 Dec 2019 17:28:35 +0100, by Jan Mulder
Added tag v1.5.1 release for changeset afa55a50cc72 maintain-1
Sun, 01 Dec 2019 17:12:27 +0100, by Jan Mulder
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
Sun, 24 Nov 2019 15:46:58 +0000, by heinrichsweikamp
Added key direction awarness to t3, t5 and t6 views: MotionDetection
Mon, 21 Oct 2019 21:16:53 +0200, by ideenmodellierer
Finetune parameter for detection of small sectors as used for the pitch detection MotionDetection
Mon, 21 Oct 2019 18:37:43 +0200, by ideenmodellierer
Consider number of available t3 views in sector handling: MotionDetection
Thu, 17 Oct 2019 23:09:17 +0200, by ideenmodellierer
Combine variables in a structure to improve readability of code MotionDetection
Thu, 17 Oct 2019 21:15:42 +0200, by ideenmodellierer
merge default MotionDetection
Thu, 10 Oct 2019 22:26:03 +0200, by Ideenmodellierer
Simplified pitch detection state machine: MotionDetection
Thu, 10 Oct 2019 22:11:59 +0200, by ideenmodellierer
Minor code cleanup MotionDetection
Thu, 10 Oct 2019 22:09:52 +0200, by ideenmodellierer
Added missing customerview selection MotionDetection
Mon, 16 Sep 2019 22:49:34 +0200, by ideenmodellierer
Incremented "idle window" for scroll detection MotionDetection
Mon, 16 Sep 2019 22:46:24 +0200, by ideenmodellierer
Motion events effect custom view in dive mode only MotionDetection
Mon, 16 Sep 2019 20:57:40 +0200, by ideenmodellierer
Added string for Empty/ Debug custom view selection MotionDetection
Mon, 16 Sep 2019 20:21:06 +0200, by ideenmodellierer
Use Enum values for initialization and setting check: MotionDetection
Tue, 10 Sep 2019 20:51:55 +0200, by ideenmodellierer
Removed some warnings MotionDetection
Sun, 08 Sep 2019 13:45:43 +0200, by ideenmodellierer
Add scroll event by pitch angle detection: MotionDetection
Sun, 08 Sep 2019 13:45:17 +0200, by ideenmodellierer
merged default into MotionDetection MotionDetection
Mon, 19 Aug 2019 17:50:55 +0200, by Ideenmodellierer
Added parameter for number of sectors to be defined MotionDetection
Mon, 19 Aug 2019 17:39:47 +0200, by ideenmodellierer
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent MotionDetection
Tue, 13 Aug 2019 21:13:54 +0200, by ideenmodellierer
Added a function to count the active custom views. MotionDetection
Tue, 13 Aug 2019 21:12:17 +0200, by ideenmodellierer
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german) MotionDetection
Tue, 13 Aug 2019 21:10:46 +0200, by ideenmodellierer
Merge default MotionDetection
Sat, 20 Jul 2019 21:42:45 +0200, by Ideenmodellierer
Fix misalignment of do while loop MotionDetection
Mon, 17 Jun 2019 19:56:38 +0200, by ideenmodellierer
Bugfix: selection of current view not working MotionDetection
Mon, 17 Jun 2019 19:53:01 +0200, by ideenmodellierer
Update call of motion detection function MotionDetection
Mon, 17 Jun 2019 19:47:07 +0200, by ideenmodellierer
Reworked detection function MotionDetection
Mon, 17 Jun 2019 19:46:18 +0200, by ideenmodellierer
Parameter update MotionDetection
Tue, 11 Jun 2019 05:31:07 +0200, by Ideenmodellierer
Pass action to customer vie update function. MotionDetection
Tue, 11 Jun 2019 05:30:09 +0200, by Ideenmodellierer
Added trigger of middle button action in case of a detected shake MotionDetection
Fri, 24 May 2019 22:01:46 +0200, by ideenmodellierer
Added new files for motion detection (shaking) detection MotionDetection
Fri, 24 May 2019 22:00:38 +0200, by ideenmodellierer
Add Support for new end-2019 hardware:
Sun, 24 Nov 2019 16:08:29 +0100, by heinrichsweikamp
Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 18:39:50 +0100, by heinrichsweikamp
Add Support for new end-2019 hardware:
Sat, 23 Nov 2019 15:36:38 +0100, by heinrichsweikamp
Make a FW 1.5.1 / RTE 2.0 binary for testing v1.5.1 release
Wed, 09 Oct 2019 20:05:47 +0200, by heinrichsweikamp
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
Wed, 09 Oct 2019 07:08:43 +0000, by heinrichsweikamp
Added tag v1.5.0 release for changeset 143fe85f82a2 fix-merge-mess
Tue, 08 Oct 2019 16:41:57 +0200, by Jan Mulder
Fix merge problem fix-merge-mess
Tue, 08 Oct 2019 16:35:45 +0200, by Jan Mulder
Merge
Sun, 06 Oct 2019 14:12:41 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
Sun, 06 Oct 2019 11:58:36 +0000, by heinrichsweikamp
Decrease ManualExitDiveCounter in surface mode FlightMode_Improvment
Thu, 03 Oct 2019 21:39:28 +0200, by ideenmodellierer
Minor changes to debug view FlightMode_Improvment
Thu, 03 Oct 2019 21:34:52 +0200, by ideenmodellierer
Added option to manually leave dive mode to system menu FlightMode_Improvment
Thu, 03 Oct 2019 21:33:47 +0200, by ideenmodellierer
Added function to support manuel exit of dive mode FlightMode_Improvment
Thu, 03 Oct 2019 21:30:16 +0200, by ideenmodellierer
Added function to evaluate the state of the surface pressure history memory FlightMode_Improvment
Thu, 03 Oct 2019 21:26:46 +0200, by ideenmodellierer
Removed not used wireless menu items FlightMode_Improvment
Tue, 01 Oct 2019 19:58:58 +0200, by ideenmodellierer
Added compile switch to enable debug view option in system menu FlightMode_Improvment
Tue, 01 Oct 2019 19:43:30 +0200, by ideenmodellierer
Removed averaging of pressure and temperatur values FlightMode_Improvment
Tue, 01 Oct 2019 19:13:41 +0200, by ideenmodellierer
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
Sun, 06 Oct 2019 14:07:51 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
Mon, 19 Aug 2019 11:42:31 +0000, by heinrichsweikamp
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values PressureMeasure_Improvment
Sat, 17 Aug 2019 19:03:47 +0200, by ideenmodellierer
Added function to avoid divemode activation during Landing: PressureMeasure_Improvment
Sat, 17 Aug 2019 18:57:15 +0200, by ideenmodellierer
Set Max value for pressure offset to 50mBar (20mBar before) PressureMeasure_Improvment
Sat, 17 Aug 2019 18:47:08 +0200, by ideenmodellierer
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing) PressureMeasure_Improvment
Sat, 17 Aug 2019 18:44:43 +0200, by ideenmodellierer
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second PressureMeasure_Improvment
Tue, 13 Aug 2019 21:46:26 +0200, by ideenmodellierer
building a 1.5 v1.5.0 release
Sun, 04 Aug 2019 11:01:06 +0200, by heinrichsweikamp
add update files for testing purposes
Sat, 20 Jul 2019 10:44:01 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
Thu, 18 Jul 2019 14:26:56 +0000, by heinrichsweikamp
Added plausibility check for pressure values I2C_Improvment
Wed, 17 Jul 2019 22:43:51 +0200, by ideenmodellierer
Added check of configuration. I2C_Improvment
Wed, 17 Jul 2019 22:43:16 +0200, by ideenmodellierer
Improved startup robustness I2C_Improvment
Wed, 17 Jul 2019 22:42:55 +0200, by ideenmodellierer
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery I2C_Improvment
Wed, 17 Jul 2019 22:42:15 +0200, by ideenmodellierer
Deactivated internal pullups and I2C interrupt callback I2C_Improvment
Wed, 17 Jul 2019 22:41:31 +0200, by ideenmodellierer
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
Mon, 01 Jul 2019 14:18:39 +0000, by heinrichsweikamp
bugfix: implement battery at end in dive header fix-batt-1
Thu, 20 Jun 2019 14:24:57 +0200, by Jan Mulder
increase RTE to 1.9 and Firmware to 1.4.9 beta
Sun, 30 Jun 2019 22:12:15 +0200, by heinrichsweikamp
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
Sun, 30 Jun 2019 19:52:46 +0000, by heinrichsweikamp
Added start of frame detection for HUD data O2_SensorSync
Sun, 30 Jun 2019 21:25:58 +0200, by ideenmodellierer
Moved indication variable for received HUD data to tCCR file. O2_SensorSync
Sun, 30 Jun 2019 21:18:05 +0200, by ideenmodellierer
Merged in janlmulder/ostc4/fix-version (pull request #27)
Wed, 19 Jun 2019 13:12:25 +0000, by heinrichsweikamp
bugfix: correct packed main version number in dive header fix-version
Wed, 19 Jun 2019 14:31:50 +0200, by Jan Mulder
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
Wed, 19 Jun 2019 13:12:01 +0000, by heinrichsweikamp
Resolved warning Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:47:54 +0200, by ideenmodellierer
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:47:33 +0200, by ideenmodellierer
Bugfix Overview, O2 values and mV in flip display mode Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:47:19 +0200, by ideenmodellierer
Reinitialize logos after flip of display Bugfix_Flip_FirmwareUpdate
Mon, 17 Jun 2019 21:46:56 +0200, by ideenmodellierer
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
Sat, 01 Jun 2019 10:12:15 +0200, by heinrichsweikamp
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
Fri, 31 May 2019 06:22:50 +0000, by heinrichsweikamp
bugfix: make stopwatch and divetime run in sync cleanup-4
Wed, 29 May 2019 14:02:27 +0200, by Jan Mulder
Make dive mode detection more advanced cleanup-4
Sun, 26 May 2019 10:09:22 +0200, by Jan Mulder

less more | rev 421: (0) -112 +112 tip

Mercurial > public > ostc4

graph