Mercurial > public > ostc4
view wiki/Make Firmware File.md @ 955:9b29995d6619 Evo_2_23 tip
GNSS backup position:
In the previous implementation a position had to be provided by the module in order to be stored in the log. This may cause a wrong position entry (default) in the log, for example if signal is lost while preparing for the dive in the water. To avoid this the last received position will be used for ~2 hours => Diver may take the dive side position before starting with the dive preparation. The last known position will be display in the GNSS position search window as well.
| author | Ideenmodellierer |
|---|---|
| date | Wed, 01 Jan 2025 20:37:17 +0100 |
| parents | 0e7c16dd774d |
| children |
line wrap: on
line source
# How to Make an Uploadable Firmware File for the OSTC4 # Generated BIN files from the SMT32 Workbench need modification in order to be installed via the OSTC Companion onto the OSTC4. ## Build Command Line Tools ## These can be found in /ostc4pack (For Windows, CPP sources available) ## Run the Tools Manually ## 1. Copy generated BIN files (From the Release or debug directory) into /ostc4pack. Or: Modify .bat files to point to your Release or debug directory. 2. run step1_create_OSTC_RTE_upload.bat and/or step1_create_OSTC4_firmware_upload_bin.bat (Depending on which part you made changes) 3. run step2_create_OSTC4update_bin.bat to create final OSTC4update_xxxxxx.bin, with xxxxxx being the current date in YYMMDD format. This will add important checksums required for the OSTC4's bootloader to accept the file. ## Upload this file with the OSTC Companion software to the OSTC4 ## See http://forum.heinrichsweikamp.com/read.php?7,19186 on how to get and use the "OSTC companion"