view Small_CPU/Inc/RTE_FlashAccess.h @ 926:875933272056 Evo_2_23 tip

Bugfix sensor de-/activation handling: In the previous version a CO2 sensor could cause a not used analog channel to be displayed. Rootcause was that all sensor type, not only o2 sensors, were used for o2 sensor deactivation evaluation. The deactivation state is the criteria if a value is displayed or not. In the new version only o2 sensor type are used for handling of sensor de-/activation state. In addition the cursor will now be set to the first valid sensor entry in case sensor slot 0 is empty.
author Ideenmodellierer
date Thu, 14 Nov 2024 20:13:18 +0100
parents 91a8f9893e68
children
line wrap: on
line source

/**
  ******************************************************************************
  * @file    RTE_FLashAccess.h based on BonexFLashAccess.h based on firmwareEraseProgram.h  
  * @author  heinrichs weikamp gmbh
  * @version V0.0.1
  * @date    20-July-2016
  * @version V0.0.1
  * @since   20-July-2016
  * @brief   erase and program the STM32F4xx internal FLASH memory for compasss calib etc.
  *
  @verbatim
  ==============================================================================
                        ##### How to use #####
  ==============================================================================
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2016 heinrichs weikamp</center></h2>
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef RTE_FLASH_ACCESS_H
#define RTE_FLASH_ACCESS_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"

/* Exported variables --------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
enum
{
	BFA_OK = 0,		//= HAL_OK
	BFA_ERROR 	= (uint8_t)HAL_ERROR,
	BFA_BUSY 		= (uint8_t)HAL_BUSY,
	BFA_TIMEOUT = (uint8_t)HAL_TIMEOUT,
	BFA_EMPTY,
};

/// split word to 2 bytes
typedef struct{
uint8_t low; ///< split word to 2 bytes
uint8_t hi; ///< split word to 2 bytes
} two_byte;


/// split word to 2 bytes
typedef union{
two_byte Byte; ///< split word to 2 bytes
uint16_t Word; ///< split word to 2 bytes
} tword;


/// split signed word to 2 bytes
typedef union{
two_byte Byte; ///< split signed word to 2 bytes
int16_t Word; ///< split signed word to 2 bytes
} signed_tword;


/// split full32 to 2 words
typedef struct{
uint16_t low16; ///< split word to 2 bytes
uint16_t hi16; ///< split word to 2 bytes
} two_word;

typedef union{
two_word Word16; ///< split word to 2 bytes
uint32_t Full32; ///< split word to 2 bytes
} tfull32;

	 /* Exported functions --------------------------------------------------------*/

uint8_t BFA_readLastDataBlock(tfull32 *dataArray4);
uint8_t BFA_writeDataBlock(const tfull32 *dataArray4);
uint16_t BFA_calc_Block_Checksum(const tfull32 *dataArray4);

#ifdef __cplusplus
}
#endif

#endif /* RTE_FLASH_ACCESS_H */

/************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/