view Documentations/dump-disc.cfg @ 283:04cdeff80254
ndl-in-logbook
Bugfix: write NDL in logbook correctly
This is a subtle one. Typecasting takes precedence over, for example, division.
So, we first typecasted an int to an uint8_t, loosing data in the process, and
then do a seconds to minute conversion. This, obviously, does not give the
result one expects.
And in hindsight a trivial fix for a bug that like has been there forever.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author
Jan Mulder <jlmulder@xs4all.nl>
date
Thu, 02 May 2019 13:08:17 +0200 (2019-05-02)
parents
01cc5959f199
children
line source
#! openocd -f+ −
# Define the prob used:+ −
source [find interface/stlink-v2.cfg]+ −
set WORKAREASIZE 0x8000+ −
transport select hla_swd+ −
+ −
# Reset options+ −
set ENABLE_LOW_POWER 1+ −
set STOP_WATCHDOG 1+ −
reset_config srst_only srst_nogate connect_assert_srst+ −
+ −
# Seelct the right chip+ −
set CHIPNAME stm32f427IIT6+ −
set CONNECT_UNDER_RESET 1+ −
source [find target/stm32f4x.cfg]+ −
+ −
# Allow to continue execution after a connection:+ −
init_reset run+ −
+ −
puts "Flash banks:"+ −
flash banks+ −
+ −
#puts "Reading FIRMWARE..."+ −
# Requires OpenOCD 0.10.0 / released January 2017 ?+ −
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000+ −
+ −
#puts "Done."+ −
exit+ −