view Documentations/dump-disc.cfg @ 283:04cdeff80254 ndl-in-logbook

Bugfix: write NDL in logbook correctly This is a subtle one. Typecasting takes precedence over, for example, division. So, we first typecasted an int to an uint8_t, loosing data in the process, and then do a seconds to minute conversion. This, obviously, does not give the result one expects. And in hindsight a trivial fix for a bug that like has been there forever. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Thu, 02 May 2019 13:08:17 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit