Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 218:ff59d1d07f9c Improve_IPC_Sync

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Splitted 120 seconds UART timeout into chunks of 500ms The UART connection via Bluetooth was realized using a receive call with 120 seconds timeout. By cancellation it seemed for the user as if the connection would have been aborted. In reality the received function keeped executing the wait for RX data till timeout occure. To avaoid this the timeout has been splitted into several calls with 500ms timeout => If the user disconnects by pressing "back" the COMM function is now ended.
author ideenmodellierer
date Sun, 31 Mar 2019 15:44:12 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit