view ostc4pack/src/checksum_final_add_fletcher.cpp @ 648:ff2b393e290f

Motion detection: Enable focus after focus calibration: In previous version the focus detection was disabled while operating menus, also for the viewport calibration entry. As result when calibrating the view, it took some time till the focus was displayed (most likely causing confusion by the diver). To avoid this the suspension is now stopped when the view is calibrated => OSTC will enter focus mode using the new value
author Ideenmodellierer
date Mon, 19 Apr 2021 20:14:20 +0200
parents 1e707b34667e
children 01f40cb1057e
line wrap: on
line source

#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <time.h>

void fletcher16(unsigned char *result1, unsigned char *result2, unsigned char const *data, size_t bytes )
{
        unsigned short sum1 = 0xff, sum2 = 0xff;
        size_t tlen;
 
        while (bytes) {
                tlen = bytes >= 20 ? 20 : bytes;
                bytes -= tlen;
                do {
                        sum2 += sum1 += *data++;
                } while (--tlen);
                sum1 = (sum1 & 0xff) + (sum1 >> 8);
                sum2 = (sum2 & 0xff) + (sum2 >> 8);
        }
        /* Second reduction step to reduce sums to 8 bits */
        sum1 = (sum1 & 0xff) + (sum1 >> 8);
        sum2 = (sum2 & 0xff) + (sum2 >> 8);
        *result2 = (sum2 & 0xff);
        *result1 = (sum1 & 0xff);
//        return sum2 << 8 | sum1;
}


// This is a variant of fletcher16 with a 16 bit sum instead of an 8 bit sum,
// and modulo 2^16 instead of 2^16-1
void
hw_ostc3_firmware_checksum (unsigned char *result1, unsigned char *result2, unsigned char *result3, unsigned char *result4, unsigned char const *data, size_t bytes )
{
	unsigned short low = 0;
	unsigned short high = 0;
	for (unsigned int i = 0; i < bytes; i++) {
		low  += data[i];
		high += low;
	}
        *result1 = (low & 0xff);
        *result2 = (low/256 & 0xff);
        *result3 = (unsigned char)(high & 0xff);
        *result4 = (unsigned char)((high/256) & 0xff);
//	return (((unsigned int)high) << 16) + low;
}


int main(int argc, char** argv) {
	
	
	FILE *fp, * fpout;
	size_t lenTotal,lenTemp;
	unsigned char buf[2000000];
	char *file = argv[1];
	char *file2 =  argv[2];
	char *file3 =  argv[3];
	unsigned int pruefsumme;
	unsigned char buf2[4];

   	printf("1: %s\n",  file);
   	printf("2: %s\n",  file2);
   	printf("3: %s\n",  file3);
   	printf("\n");
     
	
		//write File with length and cheksum
	char filename[500], filenameout[510] ;
	sprintf(filename,"%s",file);
	int filelength = strlen(filename);
	filename[filelength -4] = 0;
	
	lenTotal = 0;
	if (NULL == (fp = fopen(file, "rb")))
	{
	    printf("Unable to open %s for reading\n", file);
	    return -1;
	}
	lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf), fp);
//	lenTemp = fread(buf, sizeof(char), sizeof(buf), fp);
	lenTotal = lenTemp;
	printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
	fclose(fp);

	if(file2)
	{
		if (NULL == (fp = fopen(file2, "rb")))
		{
		    printf("Unable to open %s for reading\n", file2);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}
	if(file3)
	{
		if (NULL == (fp = fopen(file3, "rb")))
		{
		    printf("Unable to open %s for reading\n", file3);
		    return -1;
		}
		lenTemp = fread(&buf[lenTotal], sizeof(char), sizeof(buf)-lenTotal, fp);
		lenTotal += lenTemp;
		printf("%d bytes read (hex: %#x )\n", lenTemp,lenTemp);
		fclose(fp);
	}

   	printf("\n");
	printf("%d bytes read (hex: %#x ) total \n", lenTotal,lenTotal);

	time_t rawtime;
	time (&rawtime);
	struct tm *timeinfo;
	timeinfo = localtime(&rawtime);
	
//	sprintf(filenameout,"fwupdate_%s.bin",ctime(&rawtime));
	sprintf(filenameout,"OSTC4update_%02u%02u%02u.bin",timeinfo->tm_year-100,timeinfo->tm_mon+1,timeinfo->tm_mday);

    fpout = fopen(filenameout, "wb");     
    for(int i = 0;i <lenTotal;i++)
    {
    	if(fwrite(&buf[i],1,1,fpout) != 1)
     	printf("error writing\n");
	}
	
	hw_ostc3_firmware_checksum(&buf2[0],&buf2[1],&buf2[2],&buf2[3],buf,lenTotal);
	printf("checksum  %#x %#x %#x %#x\n", buf2[0],buf2[1], buf2[2], buf2[3]);
   	if(fwrite(&buf2[0],1,4,fpout) != 4)
    	printf("error writing checksum\n");
    ;
	fclose(fpout);
}