view Small_CPU/Src/i2c.c @ 228:f9ba924d188e div-fixes-4-1

Bugfix: set battery percentage correctly after RTE update When the RTE is rebooted, the battery percentage on the display is zeroed. However, when selecting SYS2-reboot-maintenance, the previously known battery percentage can be manually restored. Interestingly, when the restore reported a percentage A, choosing that resulted in a percentage B to be displayed again. With B much smaller than A. So, rebooting the RTE multiple times resulted in an seemingly empty battery, while it definitely is not. The reason for this is a relatively simple bug in the RTE code. This commit fixes the conversion between the internal LTC2941 registers and the percentage value to be displayed. Obviously, from and to the internal registers need to be symmetrical. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Tue, 02 Apr 2019 14:53:15 +0200
parents 7e749084f347
children a9d798e8c11f
line wrap: on
line source

#include "baseCPU2.h"
#include "i2c.h"
#include "scheduler.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/


//  ===============================================================================
//	I2C addresses - see i2c.h
//  ===============================================================================

I2C_HandleTypeDef I2cHandle;


/*
static void I2C_Error_Handler(void)
{
  while(1)
  {
  }
}
*/

HAL_StatusTypeDef I2C1_Status(void)
{
return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


GPIO_PinState HAL_I2C_Read_Data_PIN(void)
{
	return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN);
}

void HAL_I2C_Send_One_CLOCK(void)
{
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET);
	HAL_Delay(10);
	HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET);
	HAL_Delay(10);
}

GPIO_PinState MX_I2C1_TestAndClear(void)
{
	I2C_DeInit();
	HAL_I2C_ManualControl_MspInit();
	for(int i=0; i<9;i++)
	{
		if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET)
			HAL_I2C_Send_One_CLOCK();
		else
			break;
	}
	return HAL_I2C_Read_Data_PIN();
}

HAL_StatusTypeDef MX_I2C1_Init(void)
{
	I2cHandle.Instance             = I2Cx;
  I2cHandle.Init.AddressingMode  = I2C_ADDRESSINGMODE_7BIT;
  I2cHandle.Init.ClockSpeed      = 100000;//400000; REDUCED for compatibility with  HMC5583L + MMA8452Q
  I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
  I2cHandle.Init.DutyCycle       = I2C_DUTYCYCLE_2;
  I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
  I2cHandle.Init.NoStretchMode   = I2C_NOSTRETCH_DISABLED;
  I2cHandle.Init.OwnAddress1     = 0x01;
  
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle);
	HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED);
	HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F);



	global.dataSendToSlaveStopEval = 0;
	if(global.dataSendToSlavePending)
	{
		scheduleSpecial_Evaluate_DataSendToSlave();
	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


void I2C_DeInit(void)
{
	HAL_I2C_DeInit(&I2cHandle);
}


uint8_t i2c_errors = 0;

void I2C_Error_count(void)
{
	i2c_errors++;
}


HAL_StatusTypeDef I2C_Master_TransmitNoStop(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;
	
	global.dataSendToSlaveStopEval = 1;
	
  global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 0);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}
	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Transmit(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)(global.I2C_SystemStatus & 0x03);

	
	global.dataSendToSlaveStopEval = 1;

	global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress,  pData, Size, 2);
	if(global.I2C_SystemStatus != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}
	
	return (HAL_StatusTypeDef)global.I2C_SystemStatus;
}


HAL_StatusTypeDef I2C_Master_Receive(  uint16_t DevAddress, uint8_t *pData, uint16_t Size)
{
	if(global.I2C_SystemStatus != HAL_OK)
		return (HAL_StatusTypeDef)global.I2C_SystemStatus;

	uint8_t localHALstatusReturn = 0xFF;

	global.dataSendToSlaveStopEval = 1;

  localHALstatusReturn = HAL_I2C_Master_Receive(&I2cHandle, DevAddress,  pData, Size, 10);
	if(localHALstatusReturn != HAL_OK)
	{
		I2C_Error_count();
	}

	global.dataSendToSlaveStopEval = 0;
	//TODO: REMOVE.
//	if(global.dataSendToSlavePending)
//	{
//		scheduleSpecial_Evaluate_DataSendToSlave();
//	}

	return (HAL_StatusTypeDef)localHALstatusReturn;
}