Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c @ 228:f9ba924d188e div-fixes-4-1
Bugfix: set battery percentage correctly after RTE update
When the RTE is rebooted, the battery percentage on the display is zeroed.
However, when selecting SYS2-reboot-maintenance, the previously known
battery percentage can be manually restored. Interestingly, when
the restore reported a percentage A, choosing that resulted in a
percentage B to be displayed again. With B much smaller than A.
So, rebooting the RTE multiple times resulted in an seemingly
empty battery, while it definitely is not.
The reason for this is a relatively simple bug in the RTE code. This
commit fixes the conversion between the internal LTC2941 registers
and the percentage value to be displayed. Obviously, from and to
the internal registers need to be symmetrical.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author | Jan Mulder <jlmulder@xs4all.nl> |
---|---|
date | Tue, 02 Apr 2019 14:53:15 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_flash.c * @author MCD Application Team * @brief FLASH HAL module driver. * This file provides firmware functions to manage the following * functionalities of the internal FLASH memory: * + Program operations functions * + Memory Control functions * + Peripheral Errors functions * @verbatim ============================================================================== ##### FLASH peripheral features ##### ============================================================================== [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses to the Flash memory. It implements the erase and program Flash memory operations and the read and write protection mechanisms. [..] The Flash memory interface accelerates code execution with a system of instruction prefetch and cache lines. [..] The FLASH main features are: (+) Flash memory read operations (+) Flash memory program/erase operations (+) Read / write protections (+) Prefetch on I-Code (+) 64 cache lines of 128 bits on I-Code (+) 8 cache lines of 128 bits on D-Code ##### How to use this driver ##### ============================================================================== [..] This driver provides functions and macros to configure and program the FLASH memory of all STM32F4xx devices. (#) FLASH Memory IO Programming functions: (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and HAL_FLASH_Lock() functions (++) Program functions: byte, half word, word and double word (++) There Two modes of programming : (+++) Polling mode using HAL_FLASH_Program() function (+++) Interrupt mode using HAL_FLASH_Program_IT() function (#) Interrupts and flags management functions : (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() (++) Wait for last FLASH operation according to its status (++) Get error flag status by calling HAL_SetErrorCode() [..] In addition to these functions, this driver includes a set of macros allowing to handle the following operations: (+) Set the latency (+) Enable/Disable the prefetch buffer (+) Enable/Disable the Instruction cache and the Data cache (+) Reset the Instruction cache and the Data cache (+) Enable/Disable the FLASH interrupts (+) Monitor the FLASH flags status @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup FLASH FLASH * @brief FLASH HAL module driver * @{ */ #ifdef HAL_FLASH_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @addtogroup FLASH_Private_Constants * @{ */ #define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /** @addtogroup FLASH_Private_Variables * @{ */ /* Variable used for Erase sectors under interruption */ FLASH_ProcessTypeDef pFlash; /** * @} */ /* Private function prototypes -----------------------------------------------*/ /** @addtogroup FLASH_Private_Functions * @{ */ /* Program operations */ static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); static void FLASH_Program_Word(uint32_t Address, uint32_t Data); static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); static void FLASH_Program_Byte(uint32_t Address, uint8_t Data); static void FLASH_SetErrorCode(void); HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup FLASH_Exported_Functions FLASH Exported Functions * @{ */ /** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions * @brief Programming operation functions * @verbatim =============================================================================== ##### Programming operation functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to manage the FLASH program operations. @endverbatim * @{ */ /** * @brief Program byte, halfword, word or double word at a specified address * @param TypeProgram Indicate the way to program at a specified address. * This parameter can be a value of @ref FLASH_Type_Program * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed * * @retval HAL_StatusTypeDef HAL Status */ HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) { HAL_StatusTypeDef status = HAL_ERROR; /* Process Locked */ __HAL_LOCK(&pFlash); /* Check the parameters */ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); if(status == HAL_OK) { if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) { /*Program byte (8-bit) at a specified address.*/ FLASH_Program_Byte(Address, (uint8_t) Data); } else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) { /*Program halfword (16-bit) at a specified address.*/ FLASH_Program_HalfWord(Address, (uint16_t) Data); } else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) { /*Program word (32-bit) at a specified address.*/ FLASH_Program_Word(Address, (uint32_t) Data); } else { /*Program double word (64-bit) at a specified address.*/ FLASH_Program_DoubleWord(Address, Data); } /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); /* If the program operation is completed, disable the PG Bit */ FLASH->CR &= (~FLASH_CR_PG); } /* Process Unlocked */ __HAL_UNLOCK(&pFlash); return status; } /** * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled. * @param TypeProgram Indicate the way to program at a specified address. * This parameter can be a value of @ref FLASH_Type_Program * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed * * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) { HAL_StatusTypeDef status = HAL_OK; /* Process Locked */ __HAL_LOCK(&pFlash); /* Check the parameters */ assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); /* Enable End of FLASH Operation interrupt */ __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP); /* Enable Error source interrupt */ __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR); pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; pFlash.Address = Address; if(TypeProgram == FLASH_TYPEPROGRAM_BYTE) { /*Program byte (8-bit) at a specified address.*/ FLASH_Program_Byte(Address, (uint8_t) Data); } else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) { /*Program halfword (16-bit) at a specified address.*/ FLASH_Program_HalfWord(Address, (uint16_t) Data); } else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) { /*Program word (32-bit) at a specified address.*/ FLASH_Program_Word(Address, (uint32_t) Data); } else { /*Program double word (64-bit) at a specified address.*/ FLASH_Program_DoubleWord(Address, Data); } return status; } /** * @brief This function handles FLASH interrupt request. * @retval None */ void HAL_FLASH_IRQHandler(void) { uint32_t addresstmp = 0U; /* Check FLASH operation error flags */ #if defined(FLASH_SR_RDERR) if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) #else if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) #endif /* FLASH_SR_RDERR */ { if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) { /*return the faulty sector*/ addresstmp = pFlash.Sector; pFlash.Sector = 0xFFFFFFFFU; } else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) { /*return the faulty bank*/ addresstmp = pFlash.Bank; } else { /*return the faulty address*/ addresstmp = pFlash.Address; } /*Save the Error code*/ FLASH_SetErrorCode(); /* FLASH error interrupt user callback */ HAL_FLASH_OperationErrorCallback(addresstmp); /*Stop the procedure ongoing*/ pFlash.ProcedureOnGoing = FLASH_PROC_NONE; } /* Check FLASH End of Operation flag */ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) { /* Clear FLASH End of Operation pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE) { /*Nb of sector to erased can be decreased*/ pFlash.NbSectorsToErase--; /* Check if there are still sectors to erase*/ if(pFlash.NbSectorsToErase != 0U) { addresstmp = pFlash.Sector; /*Indicate user which sector has been erased*/ HAL_FLASH_EndOfOperationCallback(addresstmp); /*Increment sector number*/ pFlash.Sector++; addresstmp = pFlash.Sector; FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase); } else { /*No more sectors to Erase, user callback can be called.*/ /*Reset Sector and stop Erase sectors procedure*/ pFlash.Sector = addresstmp = 0xFFFFFFFFU; pFlash.ProcedureOnGoing = FLASH_PROC_NONE; /* Flush the caches to be sure of the data consistency */ FLASH_FlushCaches() ; /* FLASH EOP interrupt user callback */ HAL_FLASH_EndOfOperationCallback(addresstmp); } } else { if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) { /* MassErase ended. Return the selected bank */ /* Flush the caches to be sure of the data consistency */ FLASH_FlushCaches() ; /* FLASH EOP interrupt user callback */ HAL_FLASH_EndOfOperationCallback(pFlash.Bank); } else { /*Program ended. Return the selected address*/ /* FLASH EOP interrupt user callback */ HAL_FLASH_EndOfOperationCallback(pFlash.Address); } pFlash.ProcedureOnGoing = FLASH_PROC_NONE; } } if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) { /* Operation is completed, disable the PG, SER, SNB and MER Bits */ CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT)); /* Disable End of FLASH Operation interrupt */ __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP); /* Disable Error source interrupt */ __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR); /* Process Unlocked */ __HAL_UNLOCK(&pFlash); } } /** * @brief FLASH end of operation interrupt callback * @param ReturnValue The value saved in this parameter depends on the ongoing procedure * Mass Erase: Bank number which has been requested to erase * Sectors Erase: Sector which has been erased * (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) * Program: Address which was selected for data program * @retval None */ __weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) { /* Prevent unused argument(s) compilation warning */ UNUSED(ReturnValue); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_FLASH_EndOfOperationCallback could be implemented in the user file */ } /** * @brief FLASH operation error interrupt callback * @param ReturnValue The value saved in this parameter depends on the ongoing procedure * Mass Erase: Bank number which has been requested to erase * Sectors Erase: Sector number which returned an error * Program: Address which was selected for data program * @retval None */ __weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) { /* Prevent unused argument(s) compilation warning */ UNUSED(ReturnValue); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_FLASH_OperationErrorCallback could be implemented in the user file */ } /** * @} */ /** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions * @brief management functions * @verbatim =============================================================================== ##### Peripheral Control functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to control the FLASH memory operations. @endverbatim * @{ */ /** * @brief Unlock the FLASH control register access * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_Unlock(void) { HAL_StatusTypeDef status = HAL_OK; if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) { /* Authorize the FLASH Registers access */ WRITE_REG(FLASH->KEYR, FLASH_KEY1); WRITE_REG(FLASH->KEYR, FLASH_KEY2); /* Verify Flash is unlocked */ if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET) { status = HAL_ERROR; } } return status; } /** * @brief Locks the FLASH control register access * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_Lock(void) { /* Set the LOCK Bit to lock the FLASH Registers access */ FLASH->CR |= FLASH_CR_LOCK; return HAL_OK; } /** * @brief Unlock the FLASH Option Control Registers access. * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) { if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET) { /* Authorizes the Option Byte register programming */ FLASH->OPTKEYR = FLASH_OPT_KEY1; FLASH->OPTKEYR = FLASH_OPT_KEY2; } else { return HAL_ERROR; } return HAL_OK; } /** * @brief Lock the FLASH Option Control Registers access. * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) { /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; return HAL_OK; } /** * @brief Launch the option byte loading. * @retval HAL Status */ HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) { /* Set the OPTSTRT bit in OPTCR register */ *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT; /* Wait for last operation to be completed */ return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); } /** * @} */ /** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions * @brief Peripheral Errors functions * @verbatim =============================================================================== ##### Peripheral Errors functions ##### =============================================================================== [..] This subsection permits to get in run-time Errors of the FLASH peripheral. @endverbatim * @{ */ /** * @brief Get the specific FLASH error flag. * @retval FLASH_ErrorCode: The returned value can be a combination of: * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag */ uint32_t HAL_FLASH_GetError(void) { return pFlash.ErrorCode; } /** * @} */ /** * @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) { uint32_t tickstart = 0U; /* Clear Error Code */ pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. Even if the FLASH operation fails, the BUSY flag will be reset and an error flag will be set */ /* Get tick */ tickstart = HAL_GetTick(); while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) { return HAL_TIMEOUT; } } } /* Check FLASH End of Operation flag */ if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET) { /* Clear FLASH End of Operation pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); } #if defined(FLASH_SR_RDERR) if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET) #else if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \ FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET) #endif /* FLASH_SR_RDERR */ { /*Save the error code*/ FLASH_SetErrorCode(); return HAL_ERROR; } /* If there is no error flag set */ return HAL_OK; } /** * @brief Program a double word (64-bit) at a specified address. * @note This function must be used when the device voltage range is from * 2.7V to 3.6V and Vpp in the range 7V to 9V. * * @note If an erase and a program operations are requested simultaneously, * the erase operation is performed before the program one. * * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed. * @retval None */ static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) { /* Check the parameters */ assert_param(IS_FLASH_ADDRESS(Address)); /* If the previous operation is completed, proceed to program the new data */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD; FLASH->CR |= FLASH_CR_PG; /* Program the double-word */ *(__IO uint32_t*)Address = (uint32_t)Data; *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32); } /** * @brief Program word (32-bit) at a specified address. * @note This function must be used when the device voltage range is from * 2.7V to 3.6V. * * @note If an erase and a program operations are requested simultaneously, * the erase operation is performed before the program one. * * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed. * @retval None */ static void FLASH_Program_Word(uint32_t Address, uint32_t Data) { /* Check the parameters */ assert_param(IS_FLASH_ADDRESS(Address)); /* If the previous operation is completed, proceed to program the new data */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); FLASH->CR |= FLASH_PSIZE_WORD; FLASH->CR |= FLASH_CR_PG; *(__IO uint32_t*)Address = Data; } /** * @brief Program a half-word (16-bit) at a specified address. * @note This function must be used when the device voltage range is from * 2.1V to 3.6V. * * @note If an erase and a program operations are requested simultaneously, * the erase operation is performed before the program one. * * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed. * @retval None */ static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) { /* Check the parameters */ assert_param(IS_FLASH_ADDRESS(Address)); /* If the previous operation is completed, proceed to program the new data */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); FLASH->CR |= FLASH_PSIZE_HALF_WORD; FLASH->CR |= FLASH_CR_PG; *(__IO uint16_t*)Address = Data; } /** * @brief Program byte (8-bit) at a specified address. * @note This function must be used when the device voltage range is from * 1.8V to 3.6V. * * @note If an erase and a program operations are requested simultaneously, * the erase operation is performed before the program one. * * @param Address specifies the address to be programmed. * @param Data specifies the data to be programmed. * @retval None */ static void FLASH_Program_Byte(uint32_t Address, uint8_t Data) { /* Check the parameters */ assert_param(IS_FLASH_ADDRESS(Address)); /* If the previous operation is completed, proceed to program the new data */ CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); FLASH->CR |= FLASH_PSIZE_BYTE; FLASH->CR |= FLASH_CR_PG; *(__IO uint8_t*)Address = Data; } /** * @brief Set the specific FLASH error flag. * @retval None */ static void FLASH_SetErrorCode(void) { if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; /* Clear FLASH write protection error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR); } if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA; /* Clear FLASH Programming alignment error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR); } if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP; /* Clear FLASH Programming parallelism error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR); } if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS; /* Clear FLASH Programming sequence error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR); } #if defined(FLASH_SR_RDERR) if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_RD; /* Clear FLASH Proprietary readout protection error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR); } #endif /* FLASH_SR_RDERR */ if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET) { pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION; /* Clear FLASH Operation error pending bit */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR); } } /** * @} */ #endif /* HAL_FLASH_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/