view Documentations/dump-disc.cfg @ 448:f7c66593ab82 minor_improvments

Added compile switch to show voltage parallel to charge status percantage Show aging of bottle sensor data by change of text color: Permanent connection is shown white. After two minutes timeout the text is shown red to indicate that the value shall no longer be trusted
author ideenmodellierer
date Mon, 23 Mar 2020 21:13:52 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit