Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h @ 871:f7318457df4d default
support for new screen
ToDo: Brightness settings
author | heinrichsweikamp |
---|---|
date | Tue, 13 Aug 2024 13:24:54 +0200 |
parents | c78bcbd5deda |
children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_dcmi_ex.h * @author MCD Application Team * @brief Header file of DCMI Extension HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_DCMI_EX_H #define __STM32F4xx_HAL_DCMI_EX_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\ defined(STM32F479xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal_def.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @addtogroup DCMIEx * @brief DCMI HAL module driver * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup DCMIEx_Exported_Types DCMI Extended Exported Types * @{ */ /** * @brief DCMIEx Embedded Synchronisation CODE Init structure definition */ typedef struct { uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ }DCMI_CodesInitTypeDef; /** * @brief DCMI Init structure definition */ typedef struct { uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. This parameter can be a value of @ref DCMI_Synchronization_Mode */ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. This parameter can be a value of @ref DCMI_PIXCK_Polarity */ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. This parameter can be a value of @ref DCMI_VSYNC_Polarity */ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. This parameter can be a value of @ref DCMI_HSYNC_Polarity */ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. This parameter can be a value of @ref DCMI_Capture_Rate */ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. This parameter can be a value of @ref DCMI_Extended_Data_Mode */ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode This parameter can be a value of @ref DCMI_MODE_JPEG */ #if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface This parameter can be a value of @ref DCMIEx_Byte_Select_Mode */ uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd This parameter can be a value of @ref DCMIEx_Byte_Select_Start */ uint32_t LineSelectMode; /*!< Specifies the line of data to be captured by the interface This parameter can be a value of @ref DCMIEx_Line_Select_Mode */ uint32_t LineSelectStart; /*!< Specifies if the line of data to be captured by the interface is even or odd This parameter can be a value of @ref DCMIEx_Line_Select_Start */ #endif /* STM32F446xx || STM32F469xx || STM32F479xx */ }DCMI_InitTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ #if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants * @{ */ /** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode * @{ */ #define DCMI_BSM_ALL 0x00000000U /*!< Interface captures all received data */ #define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */ #define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */ #define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */ /** * @} */ /** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start * @{ */ #define DCMI_OEBS_ODD 0x00000000U /*!< Interface captures first data from the frame/line start, second one being dropped */ #define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */ /** * @} */ /** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode * @{ */ #define DCMI_LSM_ALL 0x00000000U /*!< Interface captures all received lines */ #define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */ /** * @} */ /** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start * @{ */ #define DCMI_OELS_ODD 0x00000000U /*!< Interface captures first line from the frame start, second one being dropped */ #define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */ /** * @} */ /** * @} */ #endif /* STM32F446xx || STM32F469xx || STM32F479xx */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ #define DCMI_POSITION_ESCR_LSC (uint32_t)DCMI_ESCR_LSC_Pos /*!< Required left shift to set line start delimiter */ #define DCMI_POSITION_ESCR_LEC (uint32_t)DCMI_ESCR_LEC_Pos /*!< Required left shift to set line end delimiter */ #define DCMI_POSITION_ESCR_FEC (uint32_t)DCMI_ESCR_FEC_Pos /*!< Required left shift to set frame end delimiter */ /* Private macro -------------------------------------------------------------*/ #if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) /** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros * @{ */ #define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \ ((MODE) == DCMI_BSM_OTHER) || \ ((MODE) == DCMI_BSM_ALTERNATE_4) || \ ((MODE) == DCMI_BSM_ALTERNATE_2)) #define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \ ((POLARITY) == DCMI_OEBS_EVEN)) #define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \ ((MODE) == DCMI_LSM_ALTERNATE_2)) #define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \ ((POLARITY) == DCMI_OELS_EVEN)) #endif /* STM32F446xx || STM32F469xx || STM32F479xx */ /** * @} */ /* Private functions ---------------------------------------------------------*/ #endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ STM32F479xx */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_DCMI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/