Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 939:f41974734268 Evo_2_23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Resume UART com with gnss after sleep: Some changes were needed to get the communication up and running again after the gnns modul was set into power mode. The config needs to be safed at shutdown and the receiver needs to be wake up using dummy bytes before real communication may be resumed
author Ideenmodellierer
date Tue, 10 Dec 2024 21:03:04 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit